Perfect Wall Storage 3D Prints

[@GretaKnauer1980]

It does appear to be back to front. The narrow edge is supposed to be nearest the wall so the fixings can lock in place.

[@TritonPrint3D]

You're right, but because the materials I was using were different (blue PLA and grey PETG), the tolerances didn't match. The attachments didn't fit from the front, so I couldn't use the locking system. However, even though it didn't lock in place this way, squeezing it together was sufficient, and the system worked. 😇

[@meguinness1116]

@@TritonPrint3D having the same problem ,,,,,will fit back to front like you did..i doubt the accessories will pop out easily.

[@poorman-trending]

But, can it play doom?

[@TinyPlasticLizards]

As a person with a very messy print area I NEED this

[@TritonPrint3D]

I'm also extremely messy, and these products have been a real lifesaver.

[@3DPrintSmith]

I just printed a wall too and waiting about a month of use before I put up a video on it to really test it out.

[@tarcisiobatista5595]

Good job, lets see

[@TritonPrint3D]

I'll be awaiting the video. 🙂

[@trajanfpv]

Very cool, nice to see you print one of my designs and use it. Great looking wall.

[@TritonPrint3D]

Thanks.

[@petera1117]

How much filament used per hex panel?

[@petera1117]

55g found it.

[@milesgti]

Thanks for the video. Justy realized you printed that piece for your hammer lol

[@Phenomenno]

I really need a stuff like this. Awesome product 👍

[@TritonPrint3D]

Thanks

[@Si_Streams]

thats cool and all but ware dose one find the STL's

[@TritonPrint3D]

ı added the link to the descriptions.

[@yunusdumlupnar4707]

clutter 🥴😩>>> then the layout is great 👏👏🥳😎

[@TritonPrint3D]

thank you

[@dreamywoodworker]

I need a bigger one for my workshop. looks very functional 👍

[@TritonPrint3D]

If you want to ask any questions I'd like to help

[@TheEpicPwnSauce]

while this looks better, I think thread boards are more practical

[@rachaelb9164]

Nice colors. That hammer is so tiny though.

[@shirlineyn]

Wow! Amazing job! I now want to do it too)

[@TritonPrint3D]

Thanks ☺

[@houditv]

Exactly what I was looking for. Thanks for the video.

[@TritonPrint3D]

[@jornreimerdes8438]

Thanks for the overview

[@TritonPrint3D]

[@crappygamerjon83]

Nice video, man! I did a Mando bucket a couple years ago and I did a couple coats of gloss black, a couple coats of clear coat, and then that same exact graphite powder amd I was super happy with the results and it didnt seem too dark to me. In the end, it's all about personal preference and what works best for you 🙂

[@TritonPrint3D]

Thank you so much. Creativity and trial and error often lead to the most beautiful results. I thought it was a great bucket. 🙂

[@Jenoveryonder]

What kind of electrical plugs are those?

[@colin8670]

Yeah, you put that honeycomb on the wall back to front. The wider brim goes at the front.

[@ExpertDiy]

Very nice!

[@FikriVarli-xx5hu]

😱amazing an idea👏👏

[@TritonPrint3D]

Thanks

[@skilledcamman4752]

though is this stronger than the thread board

[@EmreMahmut-k1n]

Hi bro is really a very good idea, I will try this

[@TritonPrint3D]

Thanks. You should try. 😎

[@lisandromir]

Nice work friend, can you provide the files?

[@TritonPrint3D]

I added the relevant link to the descriptions. But some parts designed by me. I will add too soon.

[@raoke69]

How do you remove the attachments that are hammered in?

[@akingkirby3609]

its instaled bakwerds

[@cwaters97601]

Do you happen to have a link to the mount for the small drill/driver you used at the 8:30 mark in the video? I have one very similar to that I would like to hang but have not been able to find it yet. Thanks for sharing.

[@RaulGerardoHuertasPaiva]

You put hem backwards!

[@tftexe]

what camera/software do you use for your time lapses? they look great

[@TritonPrint3D]

Thanks. 😊 You can see in this video. kzbin.info/www/bejne/h2ncgZJ-pdyXeNU

[@johannkrausgruber]

how much filament for all these stuff?

[@TritonPrint3D]

I must have used a total of 600-650 grams.

[@АРТЁМКАЗОНИН]

Please 3d model bro

[@TritonPrint3D]

I added the link to the descriptions. But some parts designed by me. I will add too soon.

[@TheWinstn60]

I cant work out which to use Honeycomb or Multiboard?

[@RaysOfPivot]

Mulitiboard

[@tugcedumlupnar1840]

👏🏻😍😘

[@TritonPrint3D]

[@FLUFFYCAT_PNW]

so manyy people print all this and then install it backward. whoops.

[@emudem6]

Broke links...

[@TritonPrint3D]

I updated the links.