Permeate Pumps

[@ewagago4647]

Thank you so very much for this video, I was looking for how to install a flow restrictor especially the direction of the arrow and you are the only one showing it! Great job!

[@bradcraddick3074]

Me too! thank you

[@ROWaterSupports]

More knowledgeable video for ro technicians . Thank you very much for this valuable video .

[@jackvangeldern7771]

Thanks! this is the clearest description I have come across.

[@dimvidpro]

Installation is not complete, why?

[@mauricioromero8827]

Why the Shutoff valve is eliminated? Do we needed? Please explain. Thank you!!!

[@uswatersystems]

The shutoff valve is not needed because the permeate pump will act as the system shutoff. A automatic shutoff valve (ASO) will shut the water off to the system when the outlet pressure is at about 60% of the inlet feed pressure. If you install a permeate pump the outlet pressure will be 100% of the inlet pressure. If a ASO is used with a permeate pump it defeats the purpose of the pump because the ASO will always shut the system off at a lower pressure.

[@jceescorner4877]

Interesting and i wonder why other installations on youtube keep the ASO valve.?

[@21boxhead]

FROM WHAT I'VE READ TO PREVENT "TDS CREEP" ALSO ADDING ASO WILL LOSE SOME PRESSURE

[@johnc6157]

WELL DONE - WELL EXPLAINED

[@tomatexelon]

Hi, I RO system that is modern that does not have all those plastic tubes, but mine does have 4 ports that I hooked up, 1, Water in - 2, Drain Out, - 3, RO water out - 4, Tank Out; Can I still use this permeate pump. It looks like I can Water in & Drine out port looks easy, but can I take my hose that goes to the tank and put it in the other port of the permeate pump and the last port of the permeate pump to the tank.

[@Fr4nkSanchez]

I have a home master RO system but the ASO valve is present

[@HECKAKYH-ADEKBATEH]

So essentially its a smart ASO, that uses unrestricted pressure of output/"waste water"/drain channel to create negative pressure/pump behind the membrane, with positive byproduct of increased suction into membrane equal to power of the drain flow; where normal ASO just restricts the main inflow based on current negative pressure/leftover capacity of the tank and does not touch the power of output/"waste water"/drain channel. Sounds smart.

[@fernando0202]

please, do you have a diagram conection pump inverse osmosis domestic, please

[@Fernandosb0202]

please, do you hace diagram instaler conection pump bomb epr1000

[@3xfake]

How long is the lifetime?

[@uswatersystems]

There is no limit on that. I we are in business it is warranted.

[@dannyl6507]

does adding this pump increase or decrease the water quality of the product water?

[@uswatersystems]

Neither. The pump won't affect the quality, it will just give you higher water pressure.

[@21boxhead]

@@uswatersystems What about TDS Creep?

[@TBOSS-of2wb]

@@21boxhead Not really. TDS creep happens when water sits in the membrane like it does overnight. an Auto flush timer installed will release about 200 ml of water per minute for about 5 minutes every couple of hours. Kinda wasteful though.

[@t.r.birmingham7402]

My permeate pumps fails after a months use. I've replaced it twice now. Does removing the aso valve damage the permeate pump over time ? I know my system is losing pressure because my ro is hooked up to my fridge water and ice and eventually the pressure weakens from the the ro and water starts leaking out of my ice maker. Does anyone know why my permeate pump keeps needing to be replaced to fix this issue? The fridge sensor for the ice maker needs the higher pressure from the permeate pump in order to shut the fill valve off. Someone please help!?

[@CarlosMorales-wk5bg]

t.r. birmingham - maybe you’re r/o tank needs air. They usually factory charge at 5-8 psi, but after a few years they tend to loose air and u won’t get the same output. Pump 5-8 psi back into the tank if is needed. If psi in tank is ok,then maybe demand for water is higher and u will need to add another tank

[@sportster88]

What model permeate pump did you use? You're not the only person who has experienced pump failure. The Aquatec ERP-500 pump I installed didn't even last 1 week.

[@MindFullCheeseburger]

Add a link to description please

[@MindFullCheeseburger]

Or not...

[@MrMinecraftAtlantis]

So.... What's a permeate pump again? It's nice to know how to install it, but what is it lol!

[@uswatersystems]

+MrMinecraftAtlantis It is a pump for the permeate (or clean) water. Without it, your will lose pressure through the filter system. With it, you will not have any pressure drop through the filter system.

[@bcbock]

@@uswatersystems I watched another video that said specifically that the permeate pump does NOT raise pressure. kzbin.info/www/bejne/pJi6fIRriJurgc0 Which one of you is correct?

[@peter7998]

Genius although now I don't know where my stop valve you disconnected first connects to!?

[@MrVidposter101]

@@bcbock The permeate pump itself doesn't raise the pressure, removal of the auto shutoff valve raises the pressure by not stopping the system at ~60% of your line pressure.

[@ajayagarwal1809]

What about membrane life with this pump bcoz it reduce the drain water amount and one more thing how can I use it with the ro system who have no pressure tank..

[@bogdanchaban]

People DO NOT remove your aso valve. I can’t believe this guy did that lol. By removing the aso valve you allow your system to run more frequently and that causes tds creep. This means your tds will be higher. You don’t have to take my word for it even though I install RO systems. Test for yourself.

[@ipwee]

Aha, that might explain why my TDS is actually higher on the output side than the input. I guess I'm going back under the sink....again.

[@flrpower5628]

If you only use a little bit of water at a time then you should keep the ASO valve. It should have been said in the video.

[@fernando0202]

please digram valvule shut off

[@jascam1]

Using color coded tubes would simplify the video..

[@21boxhead]

PERMEATE PUMPS ARE ANNOYING THEY KEEP CLICKING IF YOU HAVE EMPTY TANK THEY WILL CLICK FOR AN HOUR IT'S VERY ANNOYING

[@ryanbrand3946]

Not as annoying as people typing with the caps lock on.