Personal Record Baling Hay

[@uhohspagettioh97531]

That's a good day making hay! Nice video

[@MrRanger518]

Just found your channel and I have enjoyed all your videos.

[@Rdrake1413]

Great job on the video Chris. Loved the camera angles and the aerial footage. Very nice looking bales.

[@farmingforfunandprofit940]

Stumbled on your channel.......and being as hay is all we do i figured I would tag along.......

[@dustinpulver3376]

We’re on are second one of these exact balers the first one I put out about 20k bales through it and we were not that nice to it as in some of that we wrapped for silage hay they were not made for that but I can tell you first hand they will take it just backed the size down to 52 inch left the density turned up did want to wrap on the rollers here and there just had to keep an eye on it and cut it off the rollers before it got bad all in all these are a very reliable baler and do more than what there rated for!

[@CenTexAg]

That’s good to know. It gives me even more confidence in it

[@crazyhass84]

Do u think the gathering wheels are a worthy option?

[@CenTexAg]

Yes they are worth it

[@davemiller3027]

Great job, we just cut my 24 acer field, I'm really curious to see how many we get bailed on Tuesday. Hope it's as good as yours.

[@CenTexAg]

Thank you. If you got as mush rain as us, it should be pretty good

[@jaredcook3460]

Do you have the part number for the truck to baler wiring pigtail?

[@CenTexAg]

Hopkins 47595 7 RV Blade to 7 Way Pin Type Adapter

[@jaredcook3460]

@@CenTexAg thank you !!

[@adamm1072]

man, thats gettin after it.

[@CenTexAg]

Yeah it took me 7hrs to get it all baled

[@crazyhass84]

U didn't seem to have any trouble starting a bale! My 1995 630 new holland baler is a machine but horrible at starting bales...

[@CenTexAg]

I learned that I have to idle down running the pto at low rpm’s then ease into the windrow. Once the baler starts eating hay then I can hammer down.

[@samjames4358]

Can you tell me how to adjust the clutch pedal on a Workmaster 75?

[@CenTexAg]

There’s two adjusting points. One is on the clutch cable on the side of the transmission. The other looks like a stop bolt on the pedal side of the clutch cable in the cab. I’m just going off the service manual. Send me an email and I’ll share it with you

[@JasonS1412]

What type of grass are you cutting and baling I’m thinking of starting a small farm in north Texas area

[@CenTexAg]

It’s coastal Bermuda

[@davemiller3027]

What's the Little Blue Tractor next to the bailer?

[@CenTexAg]

Workmaster 75

[@davemiller3027]

@@CenTexAg I ment the little one with the backhoe on it.

[@CenTexAg]

Oh lol it’s a New Holland TC30. It’s a good friend mines tractor that’s very handy

[@robertwynne7861]

If price wasn’t an issue would you get the rb460 I’m thinking it’s a faster more commercial baler what’s your thoughts?

[@jessmorris2243]

Was this the liquid fertilizer you applied earlier this year? That's crazy good for one cutting! I don't fertilize real heavy but I'm doing good to get 3 bales per acre each cutting. 2.5-2.8 is typical for me.

[@CenTexAg]

Yes I hit this field with 400lbs/acre of the liquid. It was the same amount applied last year and I typically average 3 bales/acre. But the above average rain fall just made the coastal go crazy

[@allenmeinhold7038]

Wow Good job Buddy! Butch Ashland Ohio

[@petefink9664]

Hows the workmaster holding up ? Do you ever do any disking? Or bucket work

[@CenTexAg]

The tractor is holding up great. I don’t do a lot of disking but I have put alot of hours on it doing loader work. It handles its lift capacity well but had to add fluid to the rear tires.

[@michaelb.839]

Super Job Super Video 👍👍👍😃😃😁 MFG Michael