How to assemble engine VVT-i Toyota Part 15: Oil pump installation

[@andrewlightwood3895]

You have soft allumin face parts in the jaws of a steel vice ,you will damage them

[@PeterFinnTheCarDoctor]

Thanks 👍😀

[@RuannJoseph-jk8hx]

Hi Peter Finn I want to ask you something,when I change my cars engine from 1.4 i to 1.6 i VVT-I 3zz ,do I also change the gearbox or does the gearbox in the car also work on the 1.6 VVT-I 3zz engine ??? Please let me know...

[@PeterFinnTheCarDoctor]

Yes, it should.

[@steallinen]

I added an anti-friction lubricant to the engine of my car. Since then the engine is running rough. Someone said that lubricants like that can damage oil pumps. Do you know anything about that? Thx.

[@PeterFinnTheCarDoctor]

oakpubster You are right, all extra lubricants could also damage engine oil

[@ashrafabdallah6422]

peter finn thank you very much can you tel me how can i knew the chain timing stretched before make any overhauls for my car Toyota corolla 2009

[@PeterFinnTheCarDoctor]

+Ashraf Abdallah Hello. Look these videos: kzbin.info/www/bejne/r367iX9nmdubasU and kzbin.info/www/bejne/oKTEiGetrMuce8k

[@AlfredHakamanoenuku]

Hi thanks for update, now I know how to uninstall my oil pump, but one question, how if the engine is not taking out of the engine bay?

[@PeterFinnTheCarDoctor]

Thanks and noted 😀👍

[@mustaphan9121]

Does new oil pump come with gasket or I have to buy the gasket separately ??

[@khwatelanipetrus2485]

Is new oil pump

[@joegz5809]

are those the upgraded oil pump gears??

[@PeterFinnTheCarDoctor]

No, original

[@akdannie6200]

Please did the oil pump have a timing mark's

[@dreece2000]

Think about for a little bit.. There hasn’t been a Gerotor pump in Gerotor pump history that had any thought about being timed a certain way. Now you have to turn the inner gear to line up with the crank snout obvious. Take the gears and put them in the pump no need to worry about timing them.

[@PeterFinnTheCarDoctor]

No

[@dx35rock38]

Peter Finn, i need to replace 1999 toyota sienna 3.0L oil pump. must i remove the oil pan first ?

[@PeterFinnTheCarDoctor]

Hi, hard question. I recommend you to remove whole engine same time.

[@arunayuven2102]

Can the pressure oil pump be renew after it fail completely 🤔🤔🤔❓

[@khwatelanipetrus2485]

I have corolla 1zz engine 1.8engine is showing the light on the dash board we change the oil pump but still is flyshing idont know what is the problem

[@khwatelanipetrus2485]

What is the problem

[@PeterFinnTheCarDoctor]

Get fault codes with OBD scanner for me

[@ricardosegura3970]

Hola hermano solo tene cuidado con la morsa y el martillo podés dañar donde ampolla la junta o partir la oreja de la misma

[@PeterFinnTheCarDoctor]

Gracias por comentar y tomar nota 👍😀

[@nunosantos8719]

another great video lesson with all the details. I think I will start doing some services on my 3 corollas. thank you very much. regards from Portugal

[@PeterFinnTheCarDoctor]

Thanks for comment.

[@angelquintana8937]

How to change oil pump on Toyota Tacoma 2007 6cyl

[@AlexanderMasara-q9s]

Wonderful vedio. May God continue blessing you

[@PeterFinnTheCarDoctor]

Thank you! You too!

[@jonathanayala1459]

Could have used some lock-tite for screws and NO you dont need to drop engine for this

[@PeterFinnTheCarDoctor]

Ok

[@arunayuven2102]

What causes the oil pump of this engine to fail completely 🤔❓

[@Nikothemoneyking]

Should get an oil lamp light indicator

[@khontsuen]

Hi, terima kasih. Saya ingin bertanya tentang satu hal. Minggu lalu, saya melakukan pembongkaran oil pump kenderaan saya, dan saya melihat salah satu titik penanda itu dipasang mengarah ke bawah. Sementara satu lagi ke atas. Apakah itu benar, dan apa masalah jika saya memasang kedua-duanya mengarah ke atas? Terima kasih.

[@PeterFinnTheCarDoctor]

Noted 👍

[@shivasoodoo5787]

do you have to drop or remove the engine to do this?

[@PeterFinnTheCarDoctor]

+Shiva Soodoo Yes, drop the engine.

[@thabisotzn7047]

Hi Peter I bought new oil pump but still not working

[@PeterFinnTheCarDoctor]

Ok, check oil lines and install new part

[@weliftnation2418]

You explain everything right with great detail. Thank man. I will be working on my 2zzge and its alot like the 1zzfe. Does the oil pump and water pump have the same tourque spec?

[@fernandohood5542]

Feeler guages?

[@PeterFinnTheCarDoctor]

Yes

[@truchovan2833]

could you give ,diametter this pump gear ..please ,im student i need it for my project ,,thanks you

[@PeterFinnTheCarDoctor]

+truc ho van Sorry, I don't have pump now.

[@truchovan2833]

+Peter Finn ,oh :( ,thank you

[@zenonnoxious1096]

peter finn. how can i put the oil pump of the toyota innova vvt-i engine. . .

[@PeterFinnTheCarDoctor]

hello. Same way as this video.

[@zenonnoxious1096]

+Peter Finn sorry. i mean the cover po. . .

[@zenonnoxious1096]

+Peter Finn actually. i'm trying to assemble the timing cover together with the oil pump. . .because the toyota innova vvt-i. . .needs to assemble together with the oil pump. . .unlike in this video. . .you can place the oil pump without the timing cover po. . .

[@PeterFinnTheCarDoctor]

Yes, I need to do new video.

[@ZahidIqbal-ln8we]

While assembling oil pump, don't you need silicone if not why?

[@PeterFinnTheCarDoctor]

👍

[@dreece2000]

Silicon will stop up oil passages or could

[@zerosevenpro]

Torque specs , next time !

[@PeterFinnTheCarDoctor]

Thanks for comment. 👍

[@AlfredHakamanoenuku]

10:08 pm

[@PeterFinnTheCarDoctor]

Thanks and noted 😀👍

[@فاطمةالزهراءأمأبيها-و7ر]

عملية خاطئة بشد البارغي

[@PeterFinnTheCarDoctor]

Thank You for comment 👍😀

[@zaketrgvjh1621]

Hi

[@PeterFinnTheCarDoctor]

👍 Hi

[@godsstuff6798]

Low skill No skill R&R tech. You make a better living pushing lawn mower.

[@PeterFinnTheCarDoctor]

Noted