WEEBILL S SMOOTH SETTINGS // MY BEST WEEBILL S SETTINGS

[@PeterMakholm]

I have been working on this CRANE 3S DUAL GRIP for a couple of weeks, and it completely changes the way you work with you CRANE 3S See all the benefits in the video here. kzbin.info/www/bejne/imSml2ZnlsiSi6M

[@109eh]

thanks Makholm. I sold my Crane V2 with my settings and I had problems with weebill S but I had not time to test the settings. I'm wedding videomaker in Brazil Your settings is very smoth. More than I expected. Thanks again

[@PeterMakholm]

Always mate. I hope they will help you with your weddings. Stay safe...

[@Nickporter17]

This is still so valuable in 2023! Thank you!

[@calmmelancholy493]

thank you so much you saved me with the deadband and the smoothness settings because ive been suffering from sudden movements from the panning now its perfect thank you again

[@Ivo_]

Thanks Peter, Thats the video I have been waiting for👍🏻

[@PeterMakholm]

You are welcome mate.

[@yetcop]

These are definitely the best settings for the Weebill 3 and weebill 3s. Thanks for sharing them.

[@musicgearnetwork]

Extremely helpful video. Thank you, I keep coming back to your videos often. I myself make a lot of tutorial videos on music gear and I can appreciate someone that goes the extra mile like you do with your videos. Subscribed!

[@coleshill_production]

These settings are amazing, I will put them to the test tonight when filming. But I can already tell these are better settings than i was using! Shall update later!!

[@mxrevival]

Thanks for the settings! New Weebill-S owner & they are *_SO_* much smoother.

[@DesertCookie]

1:50 How heavy is your setup? I've never encountered auto tune set such high values. For my X-T3 with a cage it's always in the 30s-40s with me often having to turn it down a bit to prevent shaking and excessive motor noise.

[@BagsPackedFamily]

Hey Peter. I just got the Weebill S for my birthday (thanks, family). Your video is perfectly timed as I jump down the rabbit hole of vlogging with a gimbal. My first question, of many, is which of the 6 gimbal film mode would you recommend to use when I’m walking/talking (selfie style)?

[@PeterMakholm]

Thanks, great to hear. I would just use pf mode.

[@BagsPackedFamily]

Peter Makholm thanks! 😆

[@shangaze]

Thank you so much, Peter! These settings are perfect and my footage is smooth as! I haven't been able to achieve that before with my Weebill S.

[@sprEEEzy]

I'd say the deadband is how many degrees before it starts reacting, not how much time. Would you agree?

[@PeterMakholm]

same same but different. Yes. degrees might have been the right term to use. Thanks mate.

[@joyoffilming9500]

Perfect help - even after 3 years!

[@bodhicsutoros]

your a life saver bro thanks for all the videos covering the Weebill s

[@PeterMakholm]

Bodhi Csutoros always mate.

[@Manuelrehse]

Thank you Peter for sharing your custom settings and going through all that testing for us. Im still at the beginning with that gimbal but with your help Im sure I will learn more

[@PeterMakholm]

Thaks mate. Glad to help.

[@newellbarrett5537]

Thanks again Peter, For your dextrous ministrations, you excellence is continuing apace

[@willycitajaya]

I'm set on the motor to auto, but all rest of the setting I followed yours, perfect match.

[@mikkelpedersen5008]

wtf.. Troede aldrig jeg ville finde en film making related KZbin kanal fra en dansker.. Var så forvirret over jeg kunne høre du var dansker, da jeg ikke tænkte der var chance for det haha Men får bestilt præcis denne stabilizer idag, and keep up the great work! :)

[@PeterMakholm]

Mikkel Pedersen Hey Mikkel. Det er korrekt. Fedt af høre fra en dansk seer her på kanalen. Held og lykke med din weebill S.

[@pettersand5523]

Thanks Peter! Liked your video a lot, saved me a lot of time!

[@TheDriversDen]

I've been noticing a bit of shake in basic movements with the default settings, so hopefully, these make a difference!

[@Kaizen_n-d4v]

I am having the same issues with myy weebill S please let me know if it helped

[@daaddyo1249]

@@Kaizen_n-d4v getting dual handle grip helps a ton

[@SanaullahSajjad]

Got mine in the mail yesterday, video on my channel. Great Video though!🔥

[@PeterMakholm]

sweet mate. enjoy it.

[@FerdiGaleon]

I thought my gimbal was defective. Didn’t save any of the settings I entered after turning it off. Thank you for this info.

[@davetinoco]

Peter, I know this has nothing to do with gimbals, but you should add a backlight to make yourself stand out from the background. It would look so nice.

[@JellyB0B0]

thank you. i been trying several setting on my own and it somewhat bumpy. Your setting is smooth in all aspect.

[@PeterMakholm]

Glad I could help

[@sondp]

Smooth is actually how it eases in and out when controlled with the joystick And the higher the number the lower the smoothness, the lower the number the higher the smoothness

[@sondp]

@MovieFreak News I no longer have it, but yeah, try it and see

[@jacquessteinman2735]

You're right

[@AdventureMuse]

Thanks, exactly what I was looking for! I have the Weebill 3 but still very helpful!

[@kamrannazir7791]

Hi please tell me what is the names of 2 separate top and side grip

[@varnamshans7536]

thanks , some times recording is off signal connect with weebill s ?

[@Glen.Danielsen]

Thank mammothly much, Peter! Extremely helpful ‼️

[@PeterMakholm]

You're very welcome!

[@NIBUSVISUALCREATIONS]

Thankyou, Peter Makholm Its really informative.

[@PangazShed]

Great video! Cheers! I think it’s time for me to play with the settings, as PF is way to sensitive for my shaky hands 🤣

[@wilson97128]

Hello thanks for the explanations! Can you make a video explaining the function of your Tracking with the Panasonic Lumix S5,please?!

[@chiribimchiribim]

Hi Peter, nice video, thanks! If I always use the same setting (camera, lens) do I have to auto-tune every time I power on and off? Or once is enough?

[@AlexTimelapse]

maybe you got the magic combination settings to avoid the horrible roll motor wobbling i will give a try! thanks for this info

[@PeterMakholm]

Hopfully it will work for you. if you get motor vibrations, turn down the motor strength.

[@AlexTimelapse]

@@PeterMakholm i just got a little horizon wobble even walking super carefully, i see is a typical problem for many users, i will test if can be fixed by calibration or with your custom settings

[@98JamesNixon]

Alex Timelapse did you fix it? Having the same issue

[@atthegym]

Finally I found it!

[@fuatdomanic]

Thanks for the helpful video. Please do not forget to engage the hi-pass (50-60 hz) filter/eq setting on your voice, still got some runaway rumbles ; ) Best regards 🖖

[@PeterMakholm]

Yeah thanks mate. My problem is that my office has 5m high seelings, but I am work is in progress to fix it

[@Micah-Woods]

Man! Great settings. I tried these out and I like the sensitivity. 😄

[@muhammad_ali_zaidi]

Nice description!

[@FromLifeUpNorth]

Hi Peter! Thank you for the great content on ypur channel. I've seen a lot of your YTs and have a tip for you. I have searched a lot on the YT without finding any good video of these (costum) settings for the Ronin RS 2 or RSC 2. I've bougt the RSC 2 and are playing with these settings. I've done the research, now it's up to you to make the video :) Hope to see a video with this content from you. Have a great day and keep up the good work!

[@duck.cr3]

I just realized that in this video at random points there's a very very deep bass sound I'm not sure why edit: if you're looking for it one of them is at 2:32

[@Viniciofilms]

Nice video Peter, could you tell me please how can I get the big rig weebill S handle you are using there??? thanks a lot and good luck!!!

[@PeterMakholm]

Thanks, yes this is the one you are looking for. amzn.to/3eZu2ib

[@Viniciofilms]

@@PeterMakholm thanks bro!

[@Viniciofilms]

I really love your job man I'm considering to get the weebill s gimble but I've heard about some broken lock mechanisms on it... Should I be worried about it? Really apreciate your comments here.

[@Mahii35]

Thank you its helpful 🥰

[@GhostDunker]

thanks, works fine also with crane 2s

[@griigsee8316]

Hi Peter, which gimbal mode do you recommend for dancing video?

[@BarefootMediaTV]

my weebill s always seems to start tilting to one side, how do i straighten it out? the old zhiyun crane models would rotate a little right or left with the joystick, now that just pans and i cant get the shots to stop being off axis.

[@thefreshmindfamily7363]

amazing video. thanks for sharing you knowledge.

[@PeterMakholm]

Glad it was helpful!

[@singhakul]

Hi. Need the weebil s settings. My gimbal seems to he very shaky even while walking. I have 2.05 update installed. U can share the settings. I will be able to Do it myself

[@KnowellVisuals]

Another great video!

[@PeterMakholm]

Thanks again!

[@kinnanakahar2813]

Tq so muchhhhh...i can understand clearly ♥️♥️♥️♥️♥️♥️♥️😍😍😍

[@bvmproductiesbe]

Hey, I want my Weebill to behave just like my DJI Osmo Pocket. Do you have advice on what values the speed, deadband, ... have to be to come close?

[@melissafestinese_fotografie]

Hi Peter, Thank you for your Tutorials! Do you use the Same Settings for the crane 2s? Since the newest update i have jitter issues! But i cant get the Older Firmware to my crane because i cant connect to my Mac.

[@EE-zx1pr]

Thanks mate great tips... I'd like to ask that my joystick does not move left to right.. Up and down is ok but I could not figure why it does not move left or right

[@PeterMakholm]

It depends on what mode you are in

[@EE-zx1pr]

@@PeterMakholm PF

[@PeterMakholm]

@@EE-zx1pr In PF MODE you can only go up and down.

[@bhargavjani6467]

Thank you so much for the video! Very helpful :-)

[@nunosaraivaphotographer]

Thanks a lot again! Hugs from Lisbon!

[@PeterMakholm]

You are so welcome! Stay safe out there. Pete.

[@NigelAquascaping]

When using an arca swiss quick release plate my Camera rises ofc and the lens support doesn't reach my sigma 18-35mm. Do you know a longer lens support version?

[@murillomr7]

It’s really helpful when you bring your experience which is way more than basic tips. The best knowledge of weebill s. I have a question: I’m using your settings and My setup is light, just a7III 24mm 1.4 GM. Should I set less strength on motors? To avoid the ‘gitters’

[@PeterMakholm]

Yes. I would belive so. Your camera is lighter and you don't need that much power going to the motors. I would try reducing the numbers.

[@ec1958]

Whenever I tilt my gimbal down with the joystick the motors getting loud and vibrating insanely..is this normal?

[@Maestro1880]

Are these settings for all cameras?

[@mikehoffbeats4310]

why does the settings won´t apply to POV mode?

[@lifestylebyfornebuporten1328]

Will you do a video of the Crane 3S with the dual handle you had on it in the video

[@PeterMakholm]

Yes. I am currently working on it.

[@ranggadipta1676]

Please for crane 2s best settings

[@robertkwela8186]

Hi Peter and thank you for your time Im having some issue with my weebill s first I need to manual adjust the horizontal level by Roll Angle for 2 degree and second when tilting up with the joystick after 45 degree it loose horizontal level again. Is that something common or my gimbal is faulty. Thanks

[@artmktadvertising]

Hi Peter... I have some issues with my horizontal line .. not perfect.. already did six side calibration... and the settings is the same of yours... do you think can i do something to fix that? when i do a lateral movement, i lost the green horizontal line ... thanks for all your videos.. helping me a lot

[@PeterMakholm]

Hey. Go in to the menu of the weebill s and adjust your horizon. Press: menu - angle - roll. And adjust your roll axis.

[@artmktadvertising]

@@PeterMakholm i did... but i mean when i make some movement and lose the green line.. but he is back to the center after stop the movement ... maybe normal... right?

[@PeterMakholm]

@@artmktadvertising yes that is normal. but the the less you can get the green line to move the better you are at operating the gimbal.

[@7559kenny1]

awesome settings thankyou

[@krzysztofparda6482]

Wooow, how did you get TILT motor strength 56. Mine is 5, and value above is causes vibrating of the gimbal, even if it is perfectly balanced. My gear is Sony a7s with Sigma 16mm. I'm still not satisfied of my video, it looks like shooting from hand. Unfortunately autotunes doesn't not works fine in my case. It always vibrating after I autotune. What goes wrong? Any suggestion how can I improve my settings?

[@mreppetti]

Hi Peter! thanks for your video. I use this gimbal with a Sony A7iii + G Master 16-35 f2.8. When I calibrate the gimbal with the lens at 16mm it does more weight forward than when I use it at 35mm. Is it possible to have a correct calibration that works for the entire focal length range? If I calibrate it at 16mm and then use it at 35, sometimes when I pan from above to the ground (using PF mode) the camera "droops" back a bit, as if it were put into Vortex mode. Do you have any suggestion?

[@thej.ustory-moviecomingsoo3878]

Excellent

[@EstorilSport]

Hi, will you be doing a video for the Crane 2S settings in the near future? or would you recommend using the same settings as the Weebill?

[@PeterMakholm]

Yes I will do a video, the motor settings are set super low, but most of the advanced setting are the same. I am currently testing the setting and I have adjusted them a bit. I am also in contact with Zhiyun regarding the motor settings that are so low that they cant be adjusted. So video coming up

[@kavanrana8500]

My Weebill S starts spinning and vibrating as soon as I turn it on... what can I do? I even balanced perfectly.

[@martinpoham3161]

depends on your weightload, try differnt motor levels, if you choose the right one, everything is fine 👍🏼

[@mhj00709]

Thanks for Good Tips=!

[@kevinshabach]

Thanks!

[@LostTravellers]

Hey, thanks for this helpful video but I still have a question. Is it normal that the Weebill S gets warm? The pan and roll axis legs are getting warm (not hot though) after some time, and I was wondering if that is normal or in some way is manageable by tweaking some settings? I used the auto-tune function and then did as you advised in your video (not saying the heat comes from these setting) :-)

[@oblkprod]

hello, thanks for the videos. can the wheebil S carry a big dslr like the canon 1dx mark ii or a mirorless with a battery grip like the eos r. thanks

[@PeterMakholm]

It can carry the weight, but the camera is way to big. you need a crane 3s.

[@tonyleverett1483]

Peter, did you ever identify a set of settings for the Weebill S using firmware 2.05, or did you move on to using the Weebill 2?

[@PeterMakholm]

I still use the same settings.

[@themunk6172]

There are some strange thumping noises present in the video. Just wanted to let you know. Good work!

[@PeterMakholm]

allright thanks mate. It might be because i have the mic atached to my table. Will be fixed.

[@guzels_music]

5:09 - all important information

[@kainvfx1069]

Thanks , the dual grip works fine?

[@PeterMakholm]

It is so dope

[@Kr8tiveZea]

Please what is the meaning of pov, LV etc on the gimbal

[@LengLynn]

POV is a mode button, you can press it to switch modes. Press the LV Button to make the camera enter or exit the Live Preview mode. The manual contains detailed button instructions

[@ThatMuscleGuy]

Hi Peter I’m on the latest weebill firmware + the quick release as you recommend + the rode mic on top + your weebill recommenced settings This set up actually pushes the mic too high and it touches the axis when I go into sling mode , the motor also seems to be a little shaky even without the mic so I think it’s not perfectly balance ?

[@PeterMakholm]

Hi I would never put the mic on top of the camera, unelss you have a cage and can get the mic out to the side so it wont interfer with the backarm of the gimbal. If you get vibrations in any of the motors, adjust the settings until the vibrations are gone. You proberly will have to lover them a bit.

[@rockfitclub]

tnx bro

[@PeterMakholm]

You are welcome mate.

[@BlackwolfImaging]

I’m looking at picking up the S1H soon and I have this gimbal. Any problems balancing the S1H with a sigma 18-35 on the weebill s?

[@bymakholm5358]

That is not possible. The S1H is too big and heavy, for the weebill S

[@PeterMakholm]

The S1H is to big for the Weebill S. You will need a crane 3 lab or crane 3s.

[@doubledark2]

@@bymakholm5358 would Nikon D850+Nikon 16-35 work on Weebill S?

[@frankvet1]

Not working with the Sony a7iii. Software seems to be "beta" at best, is confusing and the movements don't approach anything that the DJI products can do quite easily. Sorry, I tried. Sent it back in exchange for DJI.

[@dymcozzy]

3:29

[@vipanrajsingh]

Can anyone help me! I am using same settings but everytime I switch to Go mode motors go crazy if pitch down. Is it normal? Also, why ZY PLAY APP keeps on disconnecting, do I need to update to latest firmware 😕😕

[@AlokShuklaArtist]

Sir my joystick not working..& every 5..10 second show exis lock.

[@elgarnamocii3397]

wow thank u so much

[@RideHanna]

I readjusted my settings to match yours exactly and the gimbal started to vibrate like crazy particularly on the upper tilt. Pan is painfully slow. Any Advise Peter?

[@PeterMakholm]

If the tilt motor vibrates. Lower the motor settings. Try to auto tune first... Those settings might be good. If the pan is too slow for you, adjust the follow settings.

[@DigitalGenki]

Thank you for putting a link to the dual handles in the description. Will you ever do a video review of the dual handle with the Weebill S? Does it help a lot?

[@PeterMakholm]

I actualy don't use the dual hande with the weebill s. Only with the crane 3s and lab. Because i like the L side grib withe the weebill s. With that i Can reach the Follow focus wheel with my thumb.

[@varnamshans7536]

nice one

[@sidhmalagar3031]

Help ful

[@CIA033]

Thanks bro

[@realographystudios7035]

I’m having issues with Weebill S horizon being off. I heard that 6 side calibration would fix it. I’ve never done the 6 side calibration before but decided to do it. However, without a camera mounted on the gimbal, it vibrates very badly, even after auto tuning. I tried changing motor settings, but after a few minutes the gimbal went to sleep, I assume because the motors overheated. Any thoughts/ideas about how to overcome this? How can I calibrate it while it’s vibrating, and will calibrating it fix the horizon problem. I’d like to reset to factory settings but I can’t find a way to do that, and I don’t know what the original settings were. BTW, it’s been upgraded to the latest firmware as of last week.

[@PeterMakholm]

Hi, Send me an email to [e-mail] and i will send you a guide.

[@mohitmojito]

Hold the POV button and put the gimbal into sleep mode. Then do the calibration.

[@КоляВасин-е6л]

nikon d750 + 80 - 200F2 = 2kilogram 200 grams , Zhiyun weeball S will it work ??????????

[@carlosandreviana9448]

THat lens is too long. It will never work properly

[@fanikurti2420]

having the smothness at 50 or 200 seems to be the same for me. The ease-in and ease-out is always harsh...

[@mattcrane1]

This is the same issue I've been struggling with for quite some time. I need a quick-ish panning speed, but the ease in and out is so harsh!

[@jsosh100]

my Weebill s starts spinning like crazy when I turn it on. Any ideas why?

[@PeterMakholm]

What firmware are you on.

[@joshuahagan3860]

@@PeterMakholm I just updated it to the latest firmware. It still does it

[@jsosh100]

@@PeterMakholm 2.02 !

[@jsosh100]

it actually stopped spinning, but now it won't look straight. It seems like the pan axis is not set to look straight? is this a firmware problem? when I tap the trigger to make it look straight, it adjusts to look diagonal.

[@ankit-travelandgadgets]

Whatever peter will do i will do 🙏

[@arifurrahman2349]

Why it’s vibrating??? 😦😦😦😦

[@arifurrahman2349]

Please Tell me...

[@PeterMakholm]

What is wibrating?

[@arifurrahman2349]

@@PeterMakholm Does the gimbal vibrate while making settings?

[@soupricemf1260]

4:48 6, 5, 8

[@mike_s_media]

Would have given the thumbs up on this one if it weren't for the unnecessary random bass thuds in the audio!