Dowel Jig Basics [video 441]

In this video I take a closer look at #cheap #dowel #jig and see what we need to do to get the best out of it. Enjoy!
++++++++
I’d like to thank MEDITE SMARTPLY for their support of the channel at this time: MEDITE makes it real, discover more here:www.meditemake...
++++++++
Other videos mentioned:-
Cabinetry Basics playlist - bit.ly/Cabinetr...
Lightweight trestles • Lightweight Folding tr...
10 year of Domino P1 • 10 Years of Domino Par...
Lamello Zeta first job • My First Commercial Jo...
Cabinetry basics p3 • Cabinetry Basics P3 [V...
Peanut 2 Mini Jig • Peanut 2 Mini Jig[**Gi...
+++++++++
Become a 10 Minute Workshop KZbin Member for exclusive content - bit.ly/10minute...
Visit my Patreon channel for exclusive content - / 10minuteworkshop
Support the channel directly - bit.ly/donate_t...
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - bit.ly/10minute...
Amazon store - bit.ly/10minute...
My ‘social’ links & contacts in one place - www.10minutewo...
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at www.10minutewo...
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - www.amazon.co....
++++++++
Used/featured in this video:-
Dowel jig kit - amzn.to/36FLdnx (US:[similar] amzn.to/3a0HKjX)
Dowel jig (no extras)- amzn.to/2MgiBdl (US:[similar] amzn.to/3a0HKjX)
Dowel jig bare (similar) - amzn.to/3bS5Oqu
8 x 30mm dowels - amzn.to/38yb16J (US:[3/8th] amzn.to/2KJAKQ5)
Wolfcraft dowel master jig - amzn.to/3dt7d9i (US: [similar] amzn.to/37tKqXb)
Wolfcraft depth stops - amzn.to/3ufYxJp (US: nope, sorry)
Strawbyte waste side jigs - thanks Karl! - bit.ly/Strawbyt...
Hinge drilling guide - amzn.to/2oYBHqk
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Bessey Duo Klamp - amzn.to/2tsSWQs (US:amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
Mirock 500mm T-ruler - etsy.me/365P0KE
Festool PDC 18/4 - amzn.to/2s3J0eq (US: amzn.to/2tWUHEL)
Festool T18 drill/driver - amzn.to/2QAHpK1 (US: amzn.to/2RPuOCR)
Spax screws - amzn.to/2oYWydc (US: amzn.to/2oOjkDT)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
+++++++++

[@garychadwick1240]

I have watched all of your videos and learned so much. Not a second of my time was ever wasted. A genuine thank you!

[@10MinuteWorkshop]

Thank you! 🙌👍

[@geromemezo1277]

Haven't watched all of them, still working my way through, but couldn't agree with you more when you say '' Not a second of my time was ever wasted '' A great bit of luck finding this channel for me. Cheers

[@romalanmoodley8504]

i couldn't agree anymore to your message

[@Viken43]

Finally Mr M shows us weekend woodworkers how to produce domino style accurate joints at beer money prices 😀 ... This is why I subscribed to the channel

[@10MinuteWorkshop]

Thanks Kevin! 👍

[@bighands69]

Unless you can reference of the edge of your panel or bit of wood it is impossible to use those little jigs accurately.

[@Lorofol]

Thanks Dad- I mean random guy on the internet

[@wigg1yscott554]

😂

[@iankearns]

With years of using dowels in the past I never knew that about using the notch on the dowel guide when doing a T joint. Every day is a learning day. Nice work Peter!

[@10MinuteWorkshop]

Thanks Ian! 👍👍

[@RobertLuciani]

I had the exact same "ahhhhhhhhhh ok" moment.

[@Ngry_W]

Same, fantastic!

[@williamjrcartwright]

Me too! Feeling very stupid now!!

[@billmckillip1561]

I bought one of those about 20 years ago at a flea market for a dollar. I never did figure out how to use it properly - now I know. Thanks!

[@10MinuteWorkshop]

Thanks! 🙌👍

[@markkoons7488]

At the moment you have a 99.7% approval rate of this video. You've earned it. Thank you.

[@10MinuteWorkshop]

Thank you! 👍👍

[@pas0003]

Thanks for a great tutorial! I spent all evening yesterday trying to come up with a jig/way to do this reliably myself. Going to pick one of these up tomorrow as it seems to make it a much easier and more pleasant experience!

[@823Steve]

The "quick tip" at the end was super excellent!

[@10MinuteWorkshop]

Glad it helped! 👍

[@productiontouring9884]

A link for this video should come with every dowel jig, great job PM.

[@10MinuteWorkshop]

Now *that* would get the viewing numbers up! Thanks! 👍👍

[@garypautard1069]

Thanks Peter . I bought the Wolfcraft jig and was having no luck with its use, despite a KZbin demo video. Now I can see why. Thanks.

[@ChickenDinnerz]

I can't believe how useful that jig is. Especially the t junction method.

[@10MinuteWorkshop]

Yes, very! Mighty impressive for a pocket-money jig. 👍

[@bohbro]

I just bought this exact same jig, and of course it came with no instructions. This video is clear concise and most importantly- informative! Thank you. Subscribed!!

[@10MinuteWorkshop]

Thanks, and welcome! 👍

[@clarkeysam]

I'm not sure I've ever done any woodwork (other than a few weeks at school) yet I've watched countless hours of your videos and enjoyed them all.

[@10MinuteWorkshop]

Glad to hear it, thanks! 👍

[@patricksmith4424]

Thanks so much for this video, I think I now know how to use a dowel jig! The using the point of the drill bit to mark is especially useful.

[@eggsngritstn]

That brad-point bit trick to align the jig to your mark is fantastic. Worth the view.

[@10MinuteWorkshop]

Thanks! 👍

[@normancoutts]

I have been using dowels for jointing for a lifetime, but I still got something out of this Peter. Thanks.

[@10MinuteWorkshop]

Thanks Norman! 👍

[@timgoodliffe]

droping the drill bit is such an easy tip i cant believe i never thought of it. Thanks!

[@Rwjudy48]

Peter, thank you. The clamping tips addressed my concern with trying to handhold the jig and drill the hole at the same time.

[@snackey10]

I learnt more of this video than i have the last 10 videos. I can actually make a straight dowl line up. Thank you for this video. I have had that tool for a long time and could never make it line up straight. A++++++++

[@timberlandhomefurniture5812]

Thanks sir it's really helpful Just yesterday I bought this dowel but don't know the way of use you explain in a very nice way its helps not only perfect joints also faster then ever

[@mrhdurban-jackson5716]

Just bought the jig. Presumed I'd be able to work it out as I am a D&T teacher but having just watched the video I would have missed half the benefits and such clever simple tips that will make it so much more useful. Thanks very much, I'll pass them on to my pupils.

[@10MinuteWorkshop]

Thank you! 👍

[@ralphrowlands3902]

Peter, I live in the north west of England. I watch all your videos and find them inspirational and inspiring. But this is a first. The other night I was in bed watching one of your videos on an iPad. My wife was trying to get to sleep at my side. At the end of the video she asked “who was that?” I told her and she said the description and information and the way it was presented was excellent! That’s something she never says to me, so thought I’d pass it on. She is right of course. Please keep it up.

[@10MinuteWorkshop]

Thanks Ralph! And Mrs Ralph! 🙌👍

[@MJR91]

Great video Peter, very helpful!

[@fabiomerlin8820]

Yes, I really enjoyed your explanation. It'll make my life a lot easier when it comes to drilling for those pieces to match...

[@charlottehewson9522]

Just bought a dowel jig and it didn’t come with instructions so, so glad to stumble over this vid. Very clear and helpful guidance. Thank You so much for your honest presentation :)

[@BeauChampion]

That was really well done, Peter! Every time I watch a video like this one I feel that I'm picking up ideas that will help me increase precision beyond the task at hand - like the brad point bit for alignment.

[@10MinuteWorkshop]

Thank you! 👍

[@dannycampbell6223]

Brilliant videos, love your channel Peter.

[@10MinuteWorkshop]

Cheers Danny! 🙌👍

[@gwauk205]

I have this exact jig and have never used dowels or a jig before. This was perfect. Thank you 🙏🏻

[@khanos73]

Really one of my favourite video about the Dowelling Jig, you covered everything

[@chrisholt2474]

I had my dowel jig on order, then found your film, brilliant thank you. When the jig arrives I now had a good idea how to use it, a fantastic film, much appreciated. I’m now also a new subscriber to your channel, perfect, kind regards.

[@steadymovie]

Thanks a lot! I just learnt how to use this tool!! Brilliant!

[@lynjermey6423]

I used the link above and bought one of these jigs. There are no instructions with it, but none were needed as your video is so well explained. Thank you.

[@10MinuteWorkshop]

Thanks! 👍

[@fisioserv]

You, are a great teacher, cause you seem to enjoy what you do.... many thanks from Malta

[@junielhipos1893]

Thanks to your vedio I've learned how to used.

[@michaelkelly3356]

Just the instructional video I needed. Thanks again for adding to your library of how to videos. Brilliant

[@10MinuteWorkshop]

Thank you! 👍

[@bigmonkey999888]

Hi Peter, the more the merrier! Every time I watch your videos I learn something new. Keep up the good work thank you Steve

[@10MinuteWorkshop]

Thanks Steve! 👍

[@buzzgallagher]

Thank you for revisiting this and giving some pointers. Those of us that have limited budget for the big tools use these all the time. I do admit though the Domino would be much faster, less aggravation, and better immediate results. Not mentioning needing 3 hands... How about a hand to the homeowner builders, makers etc that create product with the simplest of tools.

[@10MinuteWorkshop]

Absolutely! 🙌🙌👍

[@pezza39817]

There also a lot of satisfaction to be had using the simple tools.

[@rolandkeys8297]

Iv had a dowel jig for many years and never liked it , It never gave good results and thought though tap in pointy pins just seemed to be faster and easier. I knew that all the slots and sticky up bits were there for a reason but as I has never had instruction of seen how to use it . What a light bulb moment. not sure that it will replace my Domino or Lamello but certainly renewed interest.

[@10MinuteWorkshop]

As a fellow DOmino and Lamello owner, I agree completely! 😂👍

[@sylviajoiner9196]

Thx for sharing. Very easy to follow.

[@stuartkennedy9585]

Thanks Peter for all of your great videos, I struggled with this one even with clamps as I kept getting sideways movement out by a mm or so. I came across a video by Mardak workshop (how to use a doweling jig step by step). He does not mark the piece up at all instead using a dowel in a prior hole to line up the hole on the adjoining piece with the slots at the back of the jig. It worked a treat as locked everything into place so felt more stable.

[@danielfordham6537]

On the back of the video bought a cheap jig and made a great joint first time thabsj to the video Peter. One thing I found was that if you turn the jib on the pegs and use this to set up the collet on the drill bit it appears to work great for 18mm boards and 30mm dowels.

[@10MinuteWorkshop]

Thanks Daniel! 👍

[@kevincollins512]

Thank you Peter I bought this jig two years ago and never quite figured out how to use it, I have certainly learned a lot today

[@10MinuteWorkshop]

Thanks Kevin, glad to hear it! 👍

[@bobhall2171]

Thank you so much for that. For those of us who do "woodworking" (I say that loosely) as a hobby using dowels would be the way to go, well for me anyway. These are just the sort of videos I really enjoy.

[@10MinuteWorkshop]

Thanks! 👍

[@StrzalaOstryPazur]

I just already purchased. Must have in the workshop. Thanks 👍

[@sheilajulis9924]

Oh my god....... Life changing! I've been watching woodworking tutorials on KZbin since 2 years ago, and I am so surprised that I've only encountered your videos recently.. Thank you SO very much for the amazing explanations! I actually have the dowel tools but never dared to use them. Time to put those dusty tools to good use! Lots of love from Malaysia!

[@10MinuteWorkshop]

Thank you! And best wishes from London! 👍

[@williamfotiou7577]

Great video, some new ideas and techniques. Thank you.

[@allenu6295]

Just got this jig, Watched a few videos and this video was the best. I've learned more from this video than all the others together .

[@10MinuteWorkshop]

Thanks! 👍

[@jacobmcgrathth-wells189]

Thank you being new to woodwork and a complete novice I have fought with this jig in the past, now look at it with fresh eyes- now what to build!!!

[@10MinuteWorkshop]

Ah - what to build is the easy part! 😆 👍

[@rodneynaidoo9427]

Thanks for this video. I bought this jig and did not know how to use it effectively, but I can make great use of it thanks to your teaching.

[@10MinuteWorkshop]

👍👍

[@ice4142]

Thanks Peter will be using these tips tomorrow

[@10MinuteWorkshop]

Thanks! 👍

[@philipgriffiths7129]

Thanks for your video best I’ve seen so far excellent

[@10MinuteWorkshop]

Thank you! 👍

[@ismee001]

Just bought this jig, tried to use it today and failed miserably, A waste of £16 as I wound up measuring the old fashioned way. Now I have seen this, it all makes complete sense, I will have another go armed with the knowledge I have gained from this video. It shows you can teach old dogs new tricks I'm 74 . Thank you :)

[@10MinuteWorkshop]

I had that exact experience years back! These jigs aren’t great, but they’re not terrible! 😂👍

[@joeabad5908]

Another 10mins in "10min Workshop" saves me wasted time and frustration in my future projects.. Cheers..

[@10MinuteWorkshop]

Thanks! 👍

[@The.2.Minute-Man]

Thank god I found your Channel ................................. ( Liked and Subscribed )

[@10MinuteWorkshop]

Thanks - and welcome! 🙌👍

[@allanmarkby4177]

Thanks Peter. I too gave up on my cheap dowel jig 20+ years ago, it never gave good results - but I didn't throw it away. I was intrigued, my original jig had instructions that were little more than an advertising slogan "Place jig, drill holes, strong joint". Now that I understand HOW the jig was to be used it actually works!

[@10MinuteWorkshop]

Thanks Allan! 👍

[@warrensmith2902]

Well done, I rediscovered the joy of dowels after realizing that the Domino was not in the near future for my use, and biscuits alone were not getting me the alignment I wanted. Tip, I created a depth setting jig with a set of depth setting dowels so all I had to do was slip the drill over the top off the bit, down to the depth dowel, tighten the collet, and I had with the depth for the dowel, perfectly set. Made one depth dowel for each of the common dowel sizes I use. Takes most of the fiddling work out of dong dowels. BTW - I use two Milescraft Doweling Pro's to align and drill two sets of holes all at once. This avoids most the alignment issues some people have with dowels, and makes doing dowels quick and accurate.

[@10MinuteWorkshop]

Great info, thanks! 👍

[@nigelshardlow402]

A depth jig is a great idea. Perfect use for that bit of oak off cut I have lying around.

[@kevinthomson6324]

This is a good tip. I’m surprised the jigs don’t come with a depth setting line on the fence for each of the dowel sizes. Would be super simple for them to add it. I may just scratch that on myself now. Also that’s a great idea having 2. They are super cheap and keeping one with the fence and one without would keep the work more consistent if you can’t get all of each type of holes done at the same time.

[@drewcar1958]

Might I suggest you use a centre punch to make an initial guide for the drill. They help when the dowel jig' 'blinds' locating the holes to be drilled. Works fine on smooth mdf surface but not very good on unfaced chip/particle board. But I have to say I have recently discovered your channel and I find its no nonsense approach refreshing and a good ten minutes time well spent.

[@10MinuteWorkshop]

Thanks, and welcome! 👍👍

[@m4euro]

Excellent - no nonsense and informative. Cheers.

[@dmoehling]

This video made this process effortless! I love learning how to join wood without using fasteners. Gonna get one of these jigs and start practicing this.

[@sohailkhan-vh2fc]

Excellent video, to the point, thank you

[@johnridout8766]

A very timely video. I picked up a load of PAR oak from AJ Ferguson to make a couple of bedside tables this morning and this video has conformed to me that using dowel joints is the way to proceed. Thank you.

[@10MinuteWorkshop]

Excellent! I was just in there this afternoon - they said someone had been in, thanks! 🙌👍👍

[@abdulkhaliqalsaif8883]

Great point learned from this, thanks Peter

[@trevorb1239]

Good clear instructions on how to use the product your videos are the best that is why i subscribed months ago 👍🇦🇺🇦🇺👍👍👍

[@10MinuteWorkshop]

Thank you! 👍

[@gandatube]

Just stumbled on this one and I'm now going to see the others. Very pleasant and very complete. Thanks.

[@nicu_danciu]

I just bought one of this little jig. I didn’t know I could do such a lot of things with It. Thank you for your clear and nice explanation. Very calm, no loud music, it’s a pleasure watching the video. Best regards from Transilvania-România!

[@10MinuteWorkshop]

Thank you! Best wishes from London! 🙌👍👍

[@roger55es]

A pleasure to find & learn great tips to complete accurate joints Thank You

[@shaynesabala]

New subscriber. Thanks for the video. I always thought these jigs were simple but have not seen anyone illustrate how simple they are.

[@10MinuteWorkshop]

Thanks and welcome! 👍

[@bgdcg5493]

After watching this video I got an identical jig off wish for €3,arrived today,must say it's surprisingly accurate,no festool domino but would be able to but enough of these for every student in my woodwork class for a fraction of the cost of a domino jointer.thanks Peter, excellent detail and demonstration.👍

[@10MinuteWorkshop]

Thanks! 👍👍

[@derekpercy7787]

Thank you so much for sharing! What a Champion

[@10MinuteWorkshop]

Thank you! 👍

[@setyawanlatif8520]

Thank you Peter, very simple & clear explanation.

[@Na_Tezgyaha]

Your jig is looking rather good. No sink marks or bent walls from improper injection molding. I've previously bought a Wolfcraft jig similar to yours and the quality was horrendous. Returned it right away. I am now using a kwb/Bosh dowel jig and it's been quite decent. As simple as a dowel joint is it does require high accuracy.

[@10MinuteWorkshop]

Yes, an unforgiving joint, but strong when done right,👍👍

[@AllenReinecke]

My dowel kit included the pins that mark the adjacent dowel position. I used the drill point, like you, to locate the jig over that point. I was also trying to use the diagonal pins close to an edge and ended up using another board as an extension to be able to engage the pin that was off the edge of the work piece. I should have used the fence!! Never thought about it at the time. That fence is more useful than I thought. Great tips! Thx. 👍

[@10MinuteWorkshop]

Thanks! 👍

[@MrLeram12]

Very good hints. Thanks.

[@osagiermd17]

Thanks it's was very clear and precise

[@mikeeccleston8620]

Brilliant! Video. Had one for years but never understood it until now? Well done.

[@peterbradley3613]

Thanks just bought one with no instructions this video is brilliant.

[@NomadMakes]

I have to say, again, what a great vid this is. I am using it as a reference video for dowel usage. It also really interesting to see what a simple tool in the hands of an experienced woodworker can result in. IMHO this kills the whole «if I had - I could» debate in one fell swoop.

[@10MinuteWorkshop]

Thanks Goran! 👍👍

[@vedionl]

Thanks Peter for these tips. Just what I needed, everytime!

[@alastairmackay4589]

Great tips. Such a clever little tool!

[@ma-michael1558]

Thanks once again, Peter!!! Funnily enough I was looking into dowel joints this week as I have never used them and watched a video on which stress tests were done and I was convinced. Time-consuming & cheaper in comparison to the Festool dominos but it's all a hobby for me.

[@10MinuteWorkshop]

Thanks! Yes, there’s a lot to be said for them! 👍

[@tfabien]

Have a look at the Wolfcraft's dowelling ruler jig (Wolfcraft 4650), it's a great jig for making furniture, easy to use and quicker than the cheap single-hole jigs whilst remaining quite cheap + it can be used for drilling system 32 holes (altough it's a bit cumbersome)

[@carpenteire]

Great video, thanks, I've just purchased the Wolfcraft jig and I'm looking forward to using it!

[@lisacruz5185]

Thank you so much I’m very new to woodworking and ordered one and had no idea how to use it and thanks to your video I have no problem! Thanks again your video was very helpful and easy to follow along with

[@myerscok]

Thanks Peter, another wonderful basics video. I’m just about to L joint on a project. I’ve had a dowel jig for a good number of years but I thought I’d look up a ‘how to video’ just to make sure I wasn’t missing a trick. I naturally went to you video first and was not disappointed to find I’d missed a couple of tricks not just one. The notch on the side is new to me, also not using a Brad point drill bit was good to know about. Please keep up your superb content they make every day a school day. Ken Myerscough, Southport UK 👍

[@007380]

Very educational video. Thanks for sharing your knowledge.

[@10MinuteWorkshop]

Thanks! 👍

[@georgeheredia3230]

Very informative I enjoyed it thank you

[@jamesmilton5085]

My kit was delivered this week. Thank you for doing this video. Certainly has helped for when i start making my shelving unit

[@10MinuteWorkshop]

Fantastic - glad it was helpful! Let me know how you get on 👍

[@robert686434]

Thanks, i appreciate this video i bought one but never new how to use it.

[@Robe999]

Peter thank you so much for this awesome explanation on how to use the dowel jig correctly , i bought a kit over 2 years ago , in frustration i put it away , the original video looked so easy , after seeing your instruction i think i might pull it out again and give it another go , again thank you so much for this great video series

[@10MinuteWorkshop]

Thanks, great to hear it helped! 👍

[@jarvex]

Thank you sir, direct to the point as I like.

[@timwoods9350]

That was super helpful!! Thank you!

[@sarge2665]

Thanks again for another video that explains things in a way that's easy to understand (unlike most instruction manuals!) Once again invaluable advice before I went ahead and made a purchase, cheers Peter

[@10MinuteWorkshop]

Thank you! 🙌👍

[@davidmcgrath6507]

Beautiful! Thank you

[@AmandaE1964]

Super helpful, thank you sir :)

[@RKELLEHER40]

Howdy, Brother! Excellent demonstration. Your tips concerning the clamping of the jig and using the brad point drill bit for alignment were priceless. Thanks!

[@RKELLEHER40]

Howdy, Brother! Needed to view your demo again for a refresher. Thanks again and Drive-On, Cowboy!! 🤠

[@hwym59]

Well done directions. Made it very easy to understand. Thanks

[@JerGoes]

Another no nonsense video, thanks Peter.

[@10MinuteWorkshop]

Thanks Jer! 👍👍

[@Eyespy11]

Very informative, thanks!

[@zebraskindiva]

Brilliant video, just got a metal dowel jig, cannot wait to try after watching this. You are the best❤️❤️❤️👏🏻👏🏻👏🏻👏🏻

[@chrisharrison6532]

Peter again so much to learn I too have had one of those jigs in my garage and never really got to grips with it in and out of the drawer never could really fathom it out so complex in its simplicity but your little ideas are so beneficial I can see that little jig will be one of my most used tools thanks to you again oh mine is yellow not that makes a difference but I will be getting some practice with it now I know the secrets thanks again

[@10MinuteWorkshop]

Thanks! It was a yellow one I threw out years ago, lol! The problem was definitely me though, but the jig! 👍

[@micklatham3425]

Haha.snap.i though I was really gonna change things when I bought my yellow one.but couldn't fathom it out.thank you for clearing this up for me.good man.👍

[@stevesiefken6432]

Good tips! Always learn something useful from your videos! Thanks!⭐️

[@davipip]

We want more we want more !!!

[@10MinuteWorkshop]

It’s coming... 👍👍