The coiled spring came out perfect. I’ll try it this weekend and thanks for sharing your knowledge. Two thumbs up.
@petestools4 жыл бұрын
Cheers mate,Thanks for watching
@Kaptain_Kian2 жыл бұрын
I was so close to throwing the mig welder out of the garage, life saver! Thanks a million, subbed! 👌
@petestools2 жыл бұрын
Thanks for the sub!
@brianbrooks7355 Жыл бұрын
G'day Pete, love the vids mate, I'm a self taught or Pete taught welder if you like. Dabble in stick & gasless from time to time. I find your videos very helpful, no b.s. straight to the point. Hope to buy a gas bottle eventually and play with that. Anyway keep'm coming mate, see ya!
@petestools6 ай бұрын
Thanks my friend
@saraspitefull322 жыл бұрын
Thanks for waisting your wire to show us mate 👍 😂
@petestools2 жыл бұрын
LOL CHEERS
@codyeden12543 жыл бұрын
Thanks so much Pete, my dad was getting the shits at his uni mig 240 and this video fixed the problem, definitely got my follow keep it up legend🍻
@petestools3 жыл бұрын
cheers my friend
@tonybrady32443 жыл бұрын
Awsome, every other site just tells you to set your nobs to this and that and away you go. I didn't even know or they don;t tell you this part of it cheers. I'll go and get my welder out of the bin and try again
@petestools3 жыл бұрын
lol cool mate
@lou7043 жыл бұрын
G'day Pete. Thanks!
@petestools2 жыл бұрын
Hi mate how's it going ?
@fredpolice27114 жыл бұрын
Great tip Pete, thanks again.
@petestools4 жыл бұрын
Very welcome
@hughwood13 жыл бұрын
Pete, got a problem with my mig. Done everything that your video says to do. Drive roller and torch are new. I'll be welding away then it will snarle up after the drive roller. Theres always 5-10mm of wire at torch end. Just a bugger to be fair. Ive changed wire rolls and still got this problem. Its in the 1mm grove
@petestools3 жыл бұрын
Have you replace your liner .Try useing a bigger liner
@raymondgoldman9593 Жыл бұрын
Best, I have a question maybe it's a stupid question but I've only seen my MIG welding machine and no others. I have a cheap $120 MIG machine. Do all devices have the same size feed rollers and what diameter do they have. I hope i get an answer. Thank you in advance Regards Raymond
@petestools Жыл бұрын
No smaller machines have small rollers
@ziadchaccour2 жыл бұрын
Hello dear Learning a lot from your videos 👍 Was wondering about the flux core wire roller K groove versus the V groove ones ... What difference would it make if i use the V groove for flux core welding ? Will it affect the quality of the welds in any way ? Thanks a lot and keep it up !
@petestools2 жыл бұрын
I find v grove tends to crush my wire because of the flux core inside it. Thanks for watching mate.
@whiskeytangomoto3 жыл бұрын
Entertaining as well as informative.
@petestools3 жыл бұрын
Thanks mate
@christophermay29133 жыл бұрын
Thank you for the good information 🙂
@petestools2 жыл бұрын
Any time!
@Meowmeowlord Жыл бұрын
Thanks for content 😊
@petestools6 ай бұрын
welcome
@Brendan93002 жыл бұрын
Very helpful thanks
@petestools2 жыл бұрын
Glad it helped
@charliebeck1448 Жыл бұрын
Hey Peter what’s the difference between AG 60 & AG 60 p Plasma consumables is there any difference
@petestools Жыл бұрын
AG- 60 is drag tip AG-60 P is pilot arc non touch
@drexelspivey64722 жыл бұрын
thanks
@petestools2 жыл бұрын
You're welcome!
@magnoliav123 жыл бұрын
Thanks for that, my Miller 212 won't work with 025. .7mm.....I can't get it to stop birds nesting no matter what. I'll try your method, but on sheet metal, I still don't think it will work.
@petestools3 жыл бұрын
did it work ?
@magnoliav123 жыл бұрын
@@petestools Haven't had the opportunity. I'm working on another project right now, but I'll try it when I'm welding sheet metal again. Thanks