Motech Performance sent me a present for my JCW Clubman ! [CarVid19 Daily VLOG]

  Рет қаралды 34,487

Petrol Ped

Petrol Ped

Күн бұрын

Пікірлер: 326
@PetrolPed
@PetrolPed 4 жыл бұрын
Make sure you SUBSCRIBE BY CLICKING HERE...kzbin.info
@rickyard11
@rickyard11 4 жыл бұрын
Wow air filter change... well done! You’ll be changing the radio station next....... love it, keep it up Pete take care stay safe.
@PetrolPed
@PetrolPed 4 жыл бұрын
Technical stuff Simon 😜😂
@liverpooloflife8731
@liverpooloflife8731 2 жыл бұрын
Be nice to Petrol Ped.. I'm learning some bits to do various EZ-PZ mods watching him. I already learnt how to change my radio stations...
@johns14a
@johns14a 4 жыл бұрын
Getting an 18.48 minute video out of fitting a panel filter must have taken some doing. Well done that man 👍
@chrisstannard4592
@chrisstannard4592 4 жыл бұрын
John S14a 18:49 lol 😂👍
@invisiblekid99
@invisiblekid99 4 жыл бұрын
Yeah but waiting for something to go wrong was totally worth it.
@PetrolPed
@PetrolPed 4 жыл бұрын
I worked hard at that 😜😂
@gavinivers8941
@gavinivers8941 4 жыл бұрын
The screws are called Torx Headed screws, just so you know.
@andymurdoch1346
@andymurdoch1346 4 жыл бұрын
I had to change insurance companies because I fitted an AEM induction kit to my R56. Unreal. However I can say it was the best engineered and quality aftermarket piece of kit I've ever fitted to my cars. The bonnet scoop is now functional after opening the holes out. Increase of 14bhp on paper. Panel filters generally don't give much of a difference to performance (or intake noise). Keep up the good work.
@thegregphillips
@thegregphillips 4 жыл бұрын
First thing I did to Penelope: K&N Filter, then the dealer installed Dinan Elite Tune, and that does not void warranty. Yields about another 50 hp, and about 60 ft pounds of torque. For the stock F56 these made a significant difference.
@PetrolPed
@PetrolPed 4 жыл бұрын
👏👏👏
@carlhughes7003
@carlhughes7003 3 жыл бұрын
Well done on having a go. Also really liked the fact you felt it not right to video in the car when on lockdown so cut the video shorter than normal. Massive respect to you for that
@PetrolPed
@PetrolPed 3 жыл бұрын
👍
@paulcolmer9046
@paulcolmer9046 4 жыл бұрын
I was hooked until the pooches arrived on camera ! It's funny all the stuff we used to do , cone filters , webber carbs , hi output coils , plugs , updated leads. Now in 10 minutes you plug a tuning box to the fuel rail sensor and on the turbo boost , ta da 15 -20 % power boost! Think you might get more noise at the higher revs. Some ideas. Modern driving aids. Active lane assist driving the car , self park , front assist, Adaptice cruise. I know you cannot be out in the car to explain these things but many drivers never use them as it's a dark art! Give an explanation or discus. Remember my first experience of front assist with scooters diving in front of my car in San Tropez causing it to slam on the brakes! Another DIY mod could be interior panel gap trim. Just pushes into dash or door trims to liven up interior. I have some chrome red for Ateca , just no time. Keep safe.
@miata1370
@miata1370 4 жыл бұрын
I can certainly relate to your stated level of mechanical expertise! I too have done flat panel air filter replacements...AND also re-filled the windshield washer reservoir! Funny thing, I bought the MINI Bentley Service Manual for our MINI Roadster S..but think I need to go to school to understand it! I do enjoy the pictures though ;-). Thanks for the videos....and stay safe!
@stevecade857
@stevecade857 4 жыл бұрын
They designed that induction path to keep water out of the airbox. If you do get a kit to open up the bonnet scoop make sure it has a path to reduce water ingress. 30% more airflow from 50% thinner filter and 80% less filtration sounds about right. Air filters tend to be one of the least cost effective upgrades. The filter may flow a little more air at high revs but how often are you doing that. The rest of the time the standard filter will provide all the air the car needs.
@93455Driver
@93455Driver 4 жыл бұрын
If you get a Felt Tip Marker Pen, and write "K&N" on the filter, will net you 10 more horse power. US stores are now controlling the number of customers in a store at one time, but they are also increasing deliveries and grocery pickup (collect and go).
@johngoodall7097
@johngoodall7097 4 жыл бұрын
Just a bit of fun changing an airfilter but no-one else has done that so as the Americans are fond of saying "Good Job". I fitted a washable air filter to my Volvo a couple of years ago, because the paper ones are utter rubbish and don`t last long before they are clogged up, not good, much better air flow, so there!!!
@whichdoctor4858
@whichdoctor4858 4 жыл бұрын
Fitted a K&N panel air filter (2 min job) to my JCW F56 = Deeper sound, turbo/waste-gate hissing, exhaust sounds better and more responsive especially overtaking.
@huwjones5879
@huwjones5879 2 жыл бұрын
On the Gen1 R53 Cooper S the bonnet vent cools the Supercharger intercooler.
@stephenli4733
@stephenli4733 4 жыл бұрын
Nice one Mike Hodder! A hero amongst men 👍
@step0601
@step0601 4 жыл бұрын
30 years ago I fitted a pancake filter to my Mk1 Fiesta Ghia (with turquoise seats and a brown tinted sunroof, nice!). It had twin webber carbs and could out drag my mates '86 Astra GL. Had a great brraaaahp sound to it. Performance filters should in theory make more power with modern engines due to the MAF monitoring the air flow and making adjustments to fuel pressure, so engines won't burn lean. Otherwise the performance will be worse. I'm sure I'll be corrected if I'm wrong, its been 28 years since college and I ended up being a carpenter not a mechanic!
@andyhunt457
@andyhunt457 4 жыл бұрын
Ive had no problems with my K&N panel filter on my 120d after 65k.120k miles now no smoke of any sort or no dreaded timing chain rattle lol.Although i ignore the ridiculous service interval of around 20k miles gone to 8-10k max.Mobil one only,also only shell/esso/bp fuel.Every 3rd tank superdiesel,well now every other seeing as its so cheap lol. Swapped to pipercross couple months ago.Then changed back to K@N within 3 days as I could feel the difference,not really in sound but in pickup at low revs.Great vid as usual 👍👍😁
@David-bl1bt
@David-bl1bt 4 жыл бұрын
@ 9.28 "back in the day I regularly had to take the distributor cap off to check the plugs" 😮. I suggest maybe reconsidering any further diy mods!
@PetrolPed
@PetrolPed 4 жыл бұрын
That is not what is said 🤔
@David-bl1bt
@David-bl1bt 4 жыл бұрын
@@PetrolPed no offence intended, or any slur on your mechanical capabilities, just trying to Inject a modicum of humour in these worrying times. I really enjoy your bids and top marks for continuing to entertain us during the lockdown, I appreciate your commitment.
@PetrolPed
@PetrolPed 4 жыл бұрын
I prob should have put on 'or' in the sentence somewhere 😜😂😂
@abu4321
@abu4321 4 жыл бұрын
I put a pipercross in my cooper S and it did make the turbo flutters louder but that's about it. Though I do like those flutters then the few pops and bangs in sport mode.
@marksmith8663
@marksmith8663 4 жыл бұрын
I put a k&n in my motorbike and my A3 car more induction sound you only notice a difference in power if you had just taken a old dirty filter out . Save replacing it again saves money in the long run . Just clean it no need to buy a paper filters again .
@adrianadams9317
@adrianadams9317 4 жыл бұрын
Hi Pete.....Entertaining as always I hope this makes improvements to Charlie’s performance.Feedback would be interesting to see what your thoughts are between the existing filter and the new one.....After all that work.......I hope you didn’t forget to get the milk for the tea.
@SWR112
@SWR112 4 жыл бұрын
See I already thought you had put it in upside down, I’m as nervous as you on just opening the bonnet. Had my F56 five years and think I’ve opened the bonnet four times. 😁 Well the car checks the oil properly after a short drive and on the flat.
@fabsolutions2087
@fabsolutions2087 4 жыл бұрын
Nothing wrong with a stanley knife. millions of little britains have grown up, whittling bits of wood, fitting carpets, chopping up airfix kits and trimming their beards, not to mention taking off the odd digit or two. Loved the video, just what we need and finishing on a high with no queue! You couldn't make that stuff up. Thanks, looking forward to tomorrow. :-)
@PetrolPed
@PetrolPed 4 жыл бұрын
Loved this 👍
@malcolmbrew8815
@malcolmbrew8815 4 жыл бұрын
Well done. Difficult times and will continue to support your Chanel. JCW is a fantastic car and look forward to more content with it over coming months.
@PetrolPed
@PetrolPed 4 жыл бұрын
Thanks Malcolm 👍
@MotechPerformance
@MotechPerformance 4 жыл бұрын
1st of many Motech mod’s
@DamoDrives
@DamoDrives 4 жыл бұрын
Motech Performance I hope so , home remap 👏
@MotechPerformance
@MotechPerformance 4 жыл бұрын
MotorSport & Dream Cars get him up for that 😉
@ObsLevelCrossings
@ObsLevelCrossings 4 жыл бұрын
Remus a must !!!👍🏻👍🏻👍🏻
@primoperez805
@primoperez805 4 жыл бұрын
yes home remap would be nice to see
@PetrolPed
@PetrolPed 4 жыл бұрын
Hope so 👍
@richardb8503
@richardb8503 4 жыл бұрын
Wow...people can keep sending mod bits to you for ever...there are so many mini mods available...looking forward to many more of these fantastically entertaining videos...
@PetrolPed
@PetrolPed 4 жыл бұрын
By the end of Lockdown it will look like I covered it in superglue and drove through Halfords window 😂😂😂
@richardb8503
@richardb8503 4 жыл бұрын
Wasn’t too keen on the new clubman but yours does look cool!
@DennisCorreya
@DennisCorreya 4 жыл бұрын
You would need to reset your ecu for the car to recognise the changes immediately else it would take the car a few kilometres to figure out the air flow has changed. Yes and the intake will sound louder and the output does increase by 5 to 8% roughly. Enjoyed watching your video Pete 👍
@PetrolPed
@PetrolPed 4 жыл бұрын
Cheers Dennis 👍
@chriscowan6630
@chriscowan6630 4 жыл бұрын
Thanks for doing these during this difficult time .....it is appreciated by your Canadian fans! 👍🇨🇦 stay safe
@PetrolPed
@PetrolPed 4 жыл бұрын
Thanks Chris. It’s great to know people are enjoying my vids at the moment 👍
@simonbahaire8067
@simonbahaire8067 4 жыл бұрын
Still limited to 155mph. Which I can vouch it will do quite happily. Bonnet up and still didn’t look for the screen wash filler cap. 😂👍😂. Love carvid-19 6pm segment every day. Keep it up!! Hmm Waitrose in Chichester 37miles of country roads. Wonder whether I’ll get away with claiming I’m just nipping to the shops.
@colinirvine1869
@colinirvine1869 4 жыл бұрын
Very well done! I like my vent on my R53, not a fan of the pretend vents to be honest but I do really love Ruby and Charlie. Also well done for thinking of all the different ideas while on lockdown. I'm still at work as I work in IT for NHS Orkney but it's really enjoyable to sit down when the kids go to bed and watch the vlog!
@PetrolPed
@PetrolPed 4 жыл бұрын
Cheers Colin 👏
@markturner-smith5309
@markturner-smith5309 4 жыл бұрын
Panel filters always best - all the benefits of cone filters (the full expensive inclosed cold feed induction systems maybe more benefit) but without the hot air heat sock halfords DIY cone systems give. Believe that bonnet scoop was purely for the first generation Cooper S and extra cooling for the supercharger that sat directly behind it, now as you say fake does nothing as turbocharged - BMW just see fit not to remove it from a style point of view.
@craigtrigg4288
@craigtrigg4288 4 жыл бұрын
well done for doing your own mods .ive got this filters in both of my cars
@robertlangham2356
@robertlangham2356 4 жыл бұрын
BIG thumbs up for content, it's a torx driver btw, not a star shaped allen key 😂. More importantly my wife's a nurse and she's pleased to see you're doing the right thing 👍
@PetrolPed
@PetrolPed 4 жыл бұрын
Cheers Robert 😜
@DarrenJMHughes
@DarrenJMHughes 4 жыл бұрын
I really enjoy vids like this, no matter now basic, but it is entertaining to watch. Great little mod video.
@PetrolPed
@PetrolPed 4 жыл бұрын
That was the plan. Going for entertainment 😜
@ElTurfStuff
@ElTurfStuff 4 жыл бұрын
Love these daily blogs. Keep it up. Glad to know there is someone as bad as me at DIY on cars.
@andrewmoorhouse687
@andrewmoorhouse687 4 жыл бұрын
Mate, Charlie’s looking a lot better de-chromed. Amazing what a difference it’s made. It’ll be interesting if/when you do the door handles too. Looking forward to seeing that. Fun video today Pedro 👍
@raysmith1992
@raysmith1992 4 жыл бұрын
It's not an Allen key, it is a Torx screw and they also make a tamper proof version, who says you can't go the long way to the shops, I have to go to two different shops to get my weekly shop, they are 500m apart on the same road. They are smaller shops and therefore less people and my one store is also Waitrose, (there are also different shops available). Think of some of the F1 guys stuck in Monaco they can't use their cars at all. I wish I lived at Goodwood he has a racetrack round his house, the Goodwood hill climb.
@joshuamorgan1755
@joshuamorgan1755 4 жыл бұрын
I have a Remus exhaust and a K&N air intake system on my ‘15 mini and it sounds fantastic.
@pradogxld4d
@pradogxld4d 4 жыл бұрын
Another cool daily vlog. Thank you Pete. Matt from Australia 🇦🇺
@rolandbrooks467
@rolandbrooks467 4 жыл бұрын
Enjoyable little vid there Pete. I've taken a note of motechperformance so I can follow your 'mods' and maybe do a few to my Clubman and before I go, one tip from a young 67 year old,, NEVER BUY CHEAP TOOLS,,,,,,,,,,,,,,,,,
@PetrolPed
@PetrolPed 4 жыл бұрын
I know 😪😂
@higgsboson4004
@higgsboson4004 4 жыл бұрын
@13:43 "Open its legs up"? Just how do you envisage your car?
@PetrolPed
@PetrolPed 4 жыл бұрын
😂😂😂
@Stop-gt2kv
@Stop-gt2kv 4 жыл бұрын
Another good video mate, love the way the dogs just mooch around in the background :)
@mattylf1
@mattylf1 4 жыл бұрын
Good effort. Like you I used to do stuff on my own car all the time, thanks to my trusty Haynes manual. But now it’s all plastic covers hiding all the bits away.
@Russell_G
@Russell_G 4 жыл бұрын
oi oi. On a pedantic note those are torx screws, not allen keys. On a more cheerful note, I loved the singing at the end 'there's no QUEUE!!!!'
@PetrolPed
@PetrolPed 4 жыл бұрын
Happy with you being pedantic mate 😜😂
@adicojocaru6105
@adicojocaru6105 4 жыл бұрын
I ve changed 2 pipercross air filters...both broke after 1000 km...have an k n for a year now and it is perfect - although my mechanic recommended the oem - switched back to oem.... i was disappointed with pipercross
@AmandaJayne46
@AmandaJayne46 4 жыл бұрын
That was awesome, very funny 😂. Though when you said you were getting your tools out, I was somewhat worried 😦. Lol 😂. Before I could race any of my cars 🚙 my grandfather and my uncle Mike [who was a master mechanic 🧰] would get me to strip down the engine and rebuild them. It was so I understood the mechanics and not to blow the engine lol 😂 💋
@fishatethecat
@fishatethecat 4 жыл бұрын
Hi Peter. Not my car, but I'd change the alloys. These ones kinda look like they've all been curbed five times due to the design around the rim. Some quality black alloys would look good to me. the whole car needs to look a bit meaner overall.
@PetrolPed
@PetrolPed 4 жыл бұрын
I have my eyes on some nice OZs post lockdown 😜
@ginggur17
@ginggur17 4 жыл бұрын
Good evening PP. The days of tinkering with our cars have so so changed lol. Even some of the Shogie is impossible to touch, as in the ECU. I can’t even have it re mapped as it being an early sealed unit 😢. It’s a long time since I put a performance air filter in. I’m tempted myself tbh. Could cost a bloody fortune with the 3 here.
@gary3353
@gary3353 4 жыл бұрын
Have a bit of faith in your ability my old son no instructions dig in get involved lovely mini stay safe 👍
@michaelmcglashan9644
@michaelmcglashan9644 4 жыл бұрын
I reckon you could fit a cold air to Charlie in the driveway. It’s super easy and then you get some spectacular turbo noises
@dj_paultuk7052
@dj_paultuk7052 4 жыл бұрын
That is NOT going to increase airflow into the engine by 30%. Sorry but they are having you on there. At best it will be 5% improvement over a paper filter, with maybe 1 or 2bhp max improvement. Dont forget to wash it every 6000 miles also. Oh and take it out before you put it in for its dealer service. Otherwise they will void your engine warranty.
@dj_paultuk7052
@dj_paultuk7052 4 жыл бұрын
One of the guys on the A class forums had his A45 engine warranty made void just by an air filter. So i take mine out just before every service and put the paper one back in. I do not notice any power improvement what so ever. But you do get a little more induction noise that is normally silenced by the paper filter.
@GRfourfun
@GRfourfun 4 жыл бұрын
Cheeky little mod mate, put a few of those in myself and I always try to detect the difference in the sound but to no avail lol. Got an idea for a vid, bloopers! You must have a few funny ones with your numerous collaborations, just an idea 😉
@kevinmills5293
@kevinmills5293 4 жыл бұрын
Another KZbinr fitted a high flow filter to his Porsche and a dyno run showed it actually lost power. You may know who I’m referring to.
@lewishunter
@lewishunter 4 жыл бұрын
Still have all your fingers, well done that man 👍👍
@chrisynwaanstee.tipsfroman4527
@chrisynwaanstee.tipsfroman4527 4 жыл бұрын
Holy shit , I feel better about my mechanical know how after watching your trepidation’s dropping bolts and such !!! Good job buddy .
@PetrolPed
@PetrolPed 4 жыл бұрын
LOL...playing for the camera...honest 😜😂
@muhammadashrafhadif8269
@muhammadashrafhadif8269 4 жыл бұрын
Do you have a probelm when u accelerate the car while the rpm is high , theres a fuel/gas smells in the cabin ? Because im owner of the mini cooper clubman jcw2019.
@PetrolPed
@PetrolPed 4 жыл бұрын
No 🤔
@Titot182
@Titot182 4 жыл бұрын
It's a shame they only have roof bars specced on the 19-20MY. You mentioned in your other video that you can carry your bike inside the car (although in my case, it's a 29er large enduro bike), have you investigated as to whether the rear subframe can take the OEM Mini Cycle Carrier? The only reason I ask is that the missus has an R60 Clubman Cooper D, and all you need to do is whip off the 2 plastic tabs on the towbar eyelets, slide in the carrier and torque it up and then connect the 7 pin light bar onto the included wiring loom. Does the clubman have this feature (even if it means having to retrofit a 7 pin connection) because it will elevate the JCW Clubman to being my next car - I'm mostly going to be using it for b road bruising and shuttling bikes in and around Forest of Dean, Wales and occasionally jaunts into the Cotswolds. Cheers for your feedback though! +1 sub (I was also watching your Macan videos, since a used Macan is also in contention - AWD (because I always end up parking in a boggy field/layby) and sporty handling and 350 litre+ boot space are my key requirements)
@PetrolPed
@PetrolPed 4 жыл бұрын
Thanks for this. Actually done a video on carrying bikes for next Friday. But with the roof rails and bars. Didn’t know about rear mounted carrier. Will look into it 👍
@Titot182
@Titot182 4 жыл бұрын
@@PetrolPed - I've been trying to dig around the forums to see if the F54 came specc'd with the cycle carry prep. Certainly on the R60, if you remove the circular tabs, it should reveal threads on the subframe for you to mount the cycle carrier. However, this is often done in unison with the 7 pin light bar connector - I'm presuming that there's nothing in and around the rear diffuser/exhaust assembly for this? Otherwise, you may be in luck! I'm really keen on the clubman, but if there isn't a practical way of accommodating this, I might have to consider the F60 JCW instead since I know my thule roof bars will fit onto the open rails of the countryman; also content with the R60's handling, so I can only imagine the F60 JCW would be more precise/engaging. Looking forward to seeing that vid of your load lugging!
@shaunwest3612
@shaunwest3612 4 жыл бұрын
Great video Pete,it will help with fuel economy plus a few more horses,the way forward is an induction kit😀👌
@PetrolPed
@PetrolPed 4 жыл бұрын
Don't tempt me 😂
@MrRsamorrison
@MrRsamorrison 4 жыл бұрын
Another fun video Mate. Great work. No need to reply understand u have so many to reply to. Suggestion for a video. How to wash your car properly!!!🙂
@DamoDrives
@DamoDrives 4 жыл бұрын
Roderick Morrison He has already done that but trying to find it with all the other great videos might be a challenge 😂
@robertlambert5960
@robertlambert5960 4 жыл бұрын
Seat position😄😄 don't have that problem anymore. Both cars have comfort access.
@AlexMills1209
@AlexMills1209 4 жыл бұрын
I drive an F56 Cooper S JCW with the JCW Pro Tuning kit. Would you say it would be worth me upgrading the filter or not? (I’m a student so kinda need to know if it’s worth the budget)
@PetrolPed
@PetrolPed 4 жыл бұрын
You could always drop Motech and email and ask them the question 👍
@jakem22994
@jakem22994 4 жыл бұрын
The bonnet “intake” on the R53 was more or less there to get some cool air to the supercharger. I’d rather have a standard bonnet on a new mini S car than a pretend vent... imo
@joehince4590
@joehince4590 4 жыл бұрын
Eventuri solves this but not cheap 🤤
@1spongeygit
@1spongeygit 4 жыл бұрын
Was i the only one cringing when you left the screws in loose... i was concerned you were going to drop one down the intake! haha! (i did this myself on an old mk1 cortina, had to remove the head to retrieve it....) anyway, good lighthearted fun, which is exactly what we all need at the moment! stay safe!
@rolandbrooks467
@rolandbrooks467 4 жыл бұрын
Snap there 1spongeygit, only mine was the Mk2 Lotus Cortina,,,,
@billy140572
@billy140572 4 жыл бұрын
if it's like my BMW the screws actually don't come out the top cover unless you screw them out as they are retained in place, when you unscrew them they go loose when they are out of the lower part of the box then they go tight again when you try and unscrew them out of the upper part.
@David-bl1bt
@David-bl1bt 4 жыл бұрын
Ditto, I did the same on a 3 litre V6 Capri. Unfortunately the engine was running as the screw disappeared into the carbs. Major panic .Removed the manifold between the 'V' to look for it... hey presto water flooded out into the valve ports! Failed to realise it had waterways in it doh! Didn't know which side of the 'V' it went.... So eeny meeny time. Obviously I chose the wrong bank as no screw to be seen, so both heads had to come off. So... head gasket x2, water manifold gasket, carburettor gasket required before reassembly.. .Late Sunday by now so no chance! Had to get public transport to work all the following week whilst waiting for the parts. Took the whole of the following weekend to reassemble, refill with water & antifreeze and sort out the air lock. After all this, the screw was nowhere to be seen. Very baffling....until I reversed the car out of the garage...where it was observed lying on the floor 😮😥😖😠🥴. Either it didn't fall into the engine in the first place, or it was flushed out of the manifold in the torrent of coolant. So... never underestimate a 20 minute job!
@1spongeygit
@1spongeygit 4 жыл бұрын
@@rolandbrooks467 always wanted one of them! nearly bought one once, it was £700.... a very long time ago! ha!
@1spongeygit
@1spongeygit 4 жыл бұрын
@@billy140572 i did wonder but as i didn't know, it made me curl my toes a bit haha! (think he knows more than he is letting on... )
@cpandsooz
@cpandsooz 4 жыл бұрын
MOTECH Mike looking after you there Ped 🙌🏻 I’ve the same part fitted in my M135i Motech car #002. Suspect it makes a little more noise but hopefully she breathes easier. 🙌🏻🙌🏻 fellow B48 driver. Mini pops and bangs a little note I’d say.
@MotechPerformance
@MotechPerformance 4 жыл бұрын
Chris Preston 🙌🏼🙌🏼
@suzywho1066
@suzywho1066 4 жыл бұрын
That’s probably our first mod after it’s ceramic coating.
@quattro9997
@quattro9997 4 жыл бұрын
Fair to say Pete looks underwhelmed :)
@leejohns8976
@leejohns8976 4 жыл бұрын
Well done your doing great job love the channel, before you brought this I never thought about a clubman but u really like this clubman JCW version even to the point were I would buy one myself now,I loved your s4 tho aswell always loved them but just wondering petrol ped what has happened to the s4 ? Have I missed something and you have sold it?keep up the good work!!
@PetrolPed
@PetrolPed 4 жыл бұрын
Nope still have the S4 👍 We are a 3 card family now 😜
@leejohns8976
@leejohns8976 4 жыл бұрын
@@PetrolPed check you out 😂😂 are you doing any more vids on the s4?are you keeping it?
@petehaworth5959
@petehaworth5959 4 жыл бұрын
Inspired me to order a K&N filter for our Pug 208 GTI this afternoon, cheers! 😁👍
@MikeTheBike58
@MikeTheBike58 4 жыл бұрын
Love the new car Pete,best wishes to you and yours.
@PetrolPed
@PetrolPed 4 жыл бұрын
Cheers Mikey 👍
@davidmarr4606
@davidmarr4606 4 жыл бұрын
Maybe I can get a similar filter for my HOLDEN SSV COMMODORE V8. I'll do some research and thanks again, Dave from downunder 😎
@paulbullen1414
@paulbullen1414 4 жыл бұрын
Another very entertaining vid, thanks Pete. Lockdown - Am I alone in thinking when I see the traffic on our roads, "Where's everyone going? Surely, they can't all be going to essential work or the supermarket..".
@leonk5793
@leonk5793 4 жыл бұрын
That's a nice looking bread van...
@PetrolPed
@PetrolPed 4 жыл бұрын
Oy 😳
@id70b40
@id70b40 4 жыл бұрын
Well done on a superb, informative video. Congrats also on not dropping the bolts and using the right end of the screw (torx) driver🤪
@primoperez805
@primoperez805 4 жыл бұрын
Waiting for my 2017 Clubman JCW to arrive! My first mod will be the dechrome lol
@munawarhussain9859
@munawarhussain9859 4 жыл бұрын
hi PP i mite of missed a episode but were is your Audi s4 avant do you still have it.
@PetrolPed
@PetrolPed 4 жыл бұрын
Yep, we still have it 👍
@lukegrd7247
@lukegrd7247 4 жыл бұрын
Awesome video :) love your clubby and yes you could get a eventuri carbon intake cost alot though looks amazing aswell 👍
@ianpluves
@ianpluves 4 жыл бұрын
Nice video. Halfords advanced tools are worth a shout for reasonable quality with a lifetime guarantee. Oh and could you tell me the make of your bodywarmer please? Thanks in advance.
@footey7670
@footey7670 4 жыл бұрын
Well done Ped exceptional wrenching mate 👍🏻🇨🇦
@PetrolPed
@PetrolPed 4 жыл бұрын
LOL 😂
@garycarson8640
@garycarson8640 4 жыл бұрын
Need to do this as well on my mini. Question- are you not required to drive during lockdown with a facemask and gloves like we have to do in South Africa?
@gavinkaye4174
@gavinkaye4174 4 жыл бұрын
Nope
@waynemoore9951
@waynemoore9951 4 жыл бұрын
Top lads at motech, only negative is they are so far from where I live otherwise I'd be having mods done all the time
@derekfinnegan734
@derekfinnegan734 4 жыл бұрын
There’s a fine fleet of MINIs in the neighbours house, Pete!
@smash320
@smash320 4 жыл бұрын
Hello , Le changement de filtre à air ne fonctionne bien que sur une voiture reprogrammer... BMC dans la boite d'origine pour moi et 9CV de plus sur banc sur une Mini S de 2020 mais avec reprogrammation sur mesure. Merci du partage.. 😉 Désoler mon Anglais est nul!!!
@lawrencegatt4515
@lawrencegatt4515 4 жыл бұрын
Does is it really works. I tried 2 from different company,s makes in Australia 🇦🇺 on my RS Ford Focus only 2 years old . I still think 🤔 it is the same & I do look after my car,s We have ( 2 ) Focus the other is 4 door auto. The filter you got is it sold in OZ . If not I will get 1 from 🇬🇧. You are not a bad mechanic 🧰 after all. 🍻 Great Video. 🌟⭐️.
@RstewDstew
@RstewDstew 4 жыл бұрын
😂😂😂 Highly entertaining.. I was screaming at the screen when you stood there looking for the air filter 😂 How often do you lift the bonnets on your cars Mr "Car Enthusiast" ?? At least you didn't try to remove the air filter cover with a Stanley Knife!!! 👍😂Best line in your vlog: Get your car warm.. Open its legs up!! 😂😂Ps I don't let my wife near my Mini!! 😉👍 Thanks for sharing Mr Ped.
@garymason7
@garymason7 4 жыл бұрын
Am I the only one that thought he was going to fit it still in the plastic hehe... The fake air intake on mine winds me up too. I wonder if you could get a little Dremel and drill out the holes? Have a go and show us hahaha!
@PetrolPed
@PetrolPed 4 жыл бұрын
I am bad but not bad 😂
@iainchatuge
@iainchatuge 4 жыл бұрын
How many minis are in your neighbours house!! I saw three (red clubman and a couple of others) and then another clubman on your drive out!!!
@scoobyking555cm
@scoobyking555cm 4 жыл бұрын
Alright Pete, well done mate 👏 👍. I think you need to invest in a decent set of tools though. You should never be afraid of trying to do things yourself, I was changing 2.0 litre pinto engines for mates when I was as young as 15 years old using just a rope around my neck and standing on the strut tops, probably explains why I've had 6 major ops on my lower back and neck and over 30 minor procedures under sedation lol. I can't moan about it now. Thought I was invincible at that age. I have fitted an ITG race filter in my R53 and it did make some improvement, but the MSD ignition coil and leads and Iridium Spark plugs are definitely the best gains I've had on my car, and the larger Airtec intercooler! I shall say no more about other mods lol. Take care mate stay safe 👍👍👍👍👍👍👍👍👍👍🏁
@PetrolPed
@PetrolPed 4 жыл бұрын
I need to buy a Haines manual 😂
@briankelvindiffey3006
@briankelvindiffey3006 4 жыл бұрын
all you need to do is rub the socket or what ever tool you are using on a magnet for a couple of seconds and hey presto you won't loos your nuts and bolts. 😎
@richardcobern6287
@richardcobern6287 4 жыл бұрын
Do you have to notify your Insurers?
@jamiep61
@jamiep61 4 жыл бұрын
I particularly like the MINI John Cooper Works Clubman Two Tone Paint Colour
@AbsoluteMiniacGena
@AbsoluteMiniacGena 4 жыл бұрын
It’s great with me getting my Black Panther so close to you getting Charley Clubman as I’m looking to you as my mentor for easy DIY jobs which won’t affect my warranty. Firstly the belt line and now this. I have asked my husband about opening up the bonnet scoop and he ummed and ahhed about it. He doesn’t seem keen. You say there’s a company does a kit to open up the scoop ?... would you please be able to tell me who so I can look to it for consideration. As I’m so new to my Mini, I’m not aware of all the main companies making Mini modifications & gadgets so I would always be grateful to you name dropping during your videos featuring Charley and Ruby. The last ‘hottish hatch’ I owned was a Peugeot 309GRi back in the 90’s. I had wanted a 309GTi but I couldn’t find a four door at the time I was looking, but I had two children and I never put my kids in the rear of two door cars. The GTi I wanted had the 1.9i engine whereas the GRi had the 1.6i engine usually in the 205GTi. I stripped lots out and put a k&n induction kit w/ cone filter. The induction noise on that was amazing. Back in those days I was a proper petrol head and got most of my stuff from Demon Tweeks although I worked in a motor factors at the time. The Puglet itself was understated with being a GRi... it had the ‘luxury’ features rather than looking like it wanted a race and I removed the ridiculous red badge saying INJECTION as it looked out of place. I had uprated suspension and brakes for it too and my Dad used to take it to the nearby rolling road to be tweaked; he was well into his kit cars although he never had a Caterham like you , although he was very impressed when one effortlessly passed him on his way to work. I planned to do much more with my Puglet but it was a terrible starter. I became quite the expert at bump starting when it was hardly moving. I always had to park in such a way that I had space to roll it. I had everything done several times to try and trace the fault but when taken to the garage for fault finding out of sheer frustration, the Puglet would start EVERY fricking time, so they’d ring me up and say they couldn’t find anything wrong whilst it was ‘behaving’ itself so I’d collect it and drive home... then I’d decide to go out, turn the key and... NOTHING! Aaarrrggghh! Crikey I do waffle on. Sorry 😳 Gena x
@PetrolPed
@PetrolPed 4 жыл бұрын
Thanks for this Gena 👍
@stinkymuppet9207
@stinkymuppet9207 4 жыл бұрын
You worry me when you go near that car with a tool or knife 😲 reminds me of a serial killer series I used to watch 🤔 .... Dexter . If you appear with black bags I definitely know you’ve got a boat in Chichester harbour for dumping car parts 😉 thanks for sharing
@PetrolPed
@PetrolPed 4 жыл бұрын
LOL 😂
@magnus2025
@magnus2025 4 жыл бұрын
I heard that air filter change can be a scam. KZbinrs (or someone else) have tested diffrent filters and sometimes in some cars the OEM filter is better then "tuning filters" It is better to remove the box and add another filter but that require more job to clean and so on 😊
@philiphawkins4684
@philiphawkins4684 4 жыл бұрын
Torx head bolts, o btw stock paper filters are the best at capturing dirt. Get yourself some decent tool.. Wera are my favourite for screwdriver.
@mohillipsgoogle
@mohillipsgoogle 4 жыл бұрын
Would it make a normal Cooper sound any better?
@PetrolPed
@PetrolPed 4 жыл бұрын
Probably 👍
@simon_sjw9973
@simon_sjw9973 4 жыл бұрын
Hi peoples, fancy electric gates,.And I would be parking at furthest away point in the car park...!
@philipparkes5079
@philipparkes5079 4 жыл бұрын
Hi Ped Good laugh on a Friday evening.😂😂 Not sure about your aversion to DIY🤔 Looking back when mortgage rates peaked @ 17% DIY was the only answer for our 400 year old cottage, built an extension in stone, constructed roof frame, then did the slating.(I hate heights!) Still have the Readers Digest DIY books which proved invaluable. You can do anything if you really want to✌️
@PetrolPed
@PetrolPed 4 жыл бұрын
Cheers Mate 👍
@demonlee1933
@demonlee1933 4 жыл бұрын
Changing Air Filters is not always a good idea as a Dyno might discover a loss in power, in addition, if it allows an additional 30% air flow, then it also adds 30% more risk of particles into the combustion and that long term causes damage to the engine - think about this, BMW-MINI spend millions on developing a performance engine, why would they fit it with an unsuitable air filter?
@CrazyJHO
@CrazyJHO 3 жыл бұрын
Did you measure 0-100 after all thr tuning u've done?
@PetrolPed
@PetrolPed 3 жыл бұрын
Not yet 😬
@CrazyJHO
@CrazyJHO 3 жыл бұрын
@@PetrolPed there are no actual videos with 306 hp clubman 0-100 on KZbin, there are some without any add-ons, you may be the first:)
@alexwhitehead5216
@alexwhitehead5216 4 жыл бұрын
Sad times when replacing the airfilter on my alfa means jacking the car up, taking off the front bumper and removing the under tray 😢
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
My JCW Clubman - First Drive, First Mods and SHE HAS A NAME !
18:59
Ownership Update PLUS I needed a minor rant !
17:18
Petrol Ped
Рет қаралды 64 М.
Clubman Tyre disaster leads to an opportunity...
19:04
Petrol Ped
Рет қаралды 31 М.
Living With A 2020 Mini Clubman JCW
11:43
Seen Through Glass
Рет қаралды 219 М.