Peugeot 3008 Battery Replacement How To Change DIY

[@davidware3974]

Helpful video, saved me alot of time , once again praise the 'designers' who build a car around an engine, forgetting it has to be worked on

[@chlyon]

Its a sad day when you have to go find a video on how to replace a battery , but a great day when you find the exact car model video

[@panther-j1l]

Even worse when Halfords cock things up and you have to put them right 😅 wish I found this video before could have done it myself, least nothing would have got broken.

[@chlyon]

Just had to do this again so back to this video , now the car wont start has a triangle and a bar , the joys of being owned by a peugeot . I hear my slave master calling to endevour to fix it .

[@joshdwolf]

Thanks for sharing, you absolute legend! Just had to change my battery in -15c weather and this ensured I didn’t have to spent a moment longer than needed outside 😁

[@IAMASPANNER]

👍 Glad to help and thanks very much for the feedback!

[@emir5034]

BRO, BIG RESPECT for making this video and at the same using only one hand to change almost everything!!!! THX A LOT!!!!

[@IAMASPANNER]

Very glad to help! 👍

[@rocksagajohn]

KZbin is my go to channel for help & advice and this video does it so well. Well done sir - all with one hand too.

[@IAMASPANNER]

Thank you for the comment, really glad to have helped!

[@bobclarke1815]

Thank you very much. Just replaced my battery and this was a godsend. Just by looking at it i thought it was too complicated for me but this made it easy. Thanks again.

[@IAMASPANNER]

Very glad to help, thanks for the comment!

[@topcat8217]

Thanks. Just saved me a load of mess on. Halfords wouldn't touch it they said 'garage mate, 2 hours labour needed to take all the gear off around it' Imagine his suprise when I went in 30 mins later for the battery and told him it took 5 mins after watching KZbin 😂

[@IAMASPANNER]

Thanks for sharing your experience, I’m glad to hear it. Plenty of garages like that just want to charge ridiculous. I did it with 1 hand in 15 minutes 😂

[@panther-j1l]

Halfords touched mine…… It’s been a lesson learned 😅

[@RK-23]

Good job Mate. Today my old battery gone. Now, know how to replace it. Thanks a lot👍

[@shineyboots]

Well done. Thats fiddley with 2 hands so pretty brilliant with one.

[@immanueldoc4783]

Excellent video. Detailed and real time. I found it extremely useful

[@AbZk-z8u]

شكرآ لك انت انسان رائع وتستحق كل احترام..❤

[@boatman323]

That’s a right faff! Well done for doing most of it with one hand!

[@jeancarmona6846]

Nice video, thank you. Not difficult but not easy either. My luck i will probably drop the battery holder and will spend more time trying to get it out

[@jeyzee691]

Well explained. Do you have a video on how to replace egr valve on this exact model ?

[@marcelbaudoux6336]

Bonjour , Pensez à prendre une photo avec votre portable avant de démonter , ça peut aider Parfois

[@rioternumber1]

You made my life much easier. Thank you mate!

[@IAMASPANNER]

Glad to hear it, thanks for the feedback!

[@derrickirwin9800]

Great video, well explained , i needed my 2 hands and still got it difficult, thanks

[@panther-j1l]

Forgot to plug the battery control board back in at 11:27 my poor 3008 did not like that 😂 took me a while to figure out where I went wrong. Dashboard lit up like a Christmas tree with many many faults 😭 Also I’ve noticed in your video you have 3 wires to bolt back in to the fuse board my car only has 1 at the top (it’s got the 3 threaded nuts) Very useful video, I had to repair what Halfords messed up changing my battery. 😅 Cars all working now thankfully 😅

[@mircha2144]

If you hadn't made this video, I would have definitely called an electrician to change my battery 😂🤦

[@chilliconn071]

A great informative video, thankyou. I took one look at mine, saw the maze of wires on the front and thought no way but your video made it look a lot less overwhelming. What size/length of extension bar did you use for undoing the side clamp and the rear battery terminal please?

[@IAMASPANNER]

Thank you for the feedback and I’m so glad to help 👍 I think the extension would be around 8-10”

[@gregoryp9206]

Merci infiniment cher Monsieur ❤

[@nikolaristic7689]

You don't need AGM battery?

[@marklane6175]

Hi great video,i have same vehicle and looking for a new battery,i notice the bosch 008 your fitting is not for start/stop vehicles,should be a bosch s4e08 or equivelent,does it still stop/start,many thanks.

[@shineyboots]

Do we have to reset the radio code or is it auto reset ?

[@IAMASPANNER]

Radio didn’t require a reset 👍

[@shineyboots]

Thats great .Thank for the info@@IAMASPANNER

[@NONLIBERALS]

Hi mate What year is this 3008 Please?? My wife have a 2010. By the way thx for the brilliant video. 👍🏻

[@adreenalove_]

Can I know what spanar are you using? And what size of the spanar??

[@AM-ji2ty]

Спасибо, всё ясно и подробно 👍

[@daniroquai]

Hello friend, thanks for sharing the video. Is it an E-HDI engine? I have a 3008 e-hdi 2013, but I noticed that the start stop does not work, apparently it is because the previous owner installed a normal battery? may be?

[@oktaykazak3575]

Güzel bir paylaşım olmuş teşekkürler fakat akü kutup başını sökerken önce - sökülür sonra + akü takarken önce + sonra - sağlıklı olması için

[@marknicholls4133]

Nice one mate! V good video

[@joakimwohlfeil]

Saved a lot of time !

[@rodinvillarosa2924]

Didnt the computer reset when you unplug the battery? Maybe we should parallel link an alternative 12v source first?

[@IAMASPANNER]

Not necessary but you can if you wish. Saves having to set the clock.

[@MM-gy3gp]

It was useful thx a lot👍

[@dhaudsardar]

What battery model is this? 096 or 027?

[@moussinobied5013]

Fantastic May I ask why do they design this in this manner making it very difficult to remove the battery Weird designers

[@gunner678]

Very useful, thanks!

[@wag1566]

Where’s the negative terminal?

[@klonejedi]

I wonder how the designers could have conceived such a complicated system for positioning a car battery

[@monirmualla]

Thank you SIR ...

[@arnoldbalotelli5223]

Thanks a lot for this

[@stefanocolombo3078]

It all started with a "Quick release....

[@CmdrX3]

Edited between placing the clamp and tightening it...That'll be the 20 minutes of swearing and cursing the idiots who thought it was a good idea to put a bracket in such a stupid tight place followed by some cursing and swearing at the backet and bolt.

[@topcat8217]

I dropped it back in coming from the front not down. Was easier. Then put bolt in socket and extension without the handle and went in an angle from front too. Then went vertical and hand tightened. Was easy tbh. Got it first time and took a min. Expected a faff

[@Vivianauxito]

Hey,sir. We produce LEDs for auto and reached out to you via email for inquiring an opportunity. Did you receive email from our team?

[@IAMASPANNER]

I’ll have a look, probably gone into spam.