Peugeot 306 2.0 HDI 2001 fuel pressure regulator.

[@koprivaful]

Gott sei Dank haben Sie daran gedacht, den Kabinenventilator auszuschalten...!!Und vor der Reparatur haben Sie es nicht mit der Diagnose verbunden

[@procta2343]

I have this exact same problem with mine, thanks for confirming!!

[@brianmcnamara7046]

Was one of the symptoms a longer than normal prime time of the common rail? Assuming you have an In-Tank fuel pump, priming the common rail should normally take 3 seconds. I am seeing longer than 3 seconds & I am thinking I have a leaking regulator on 2.0 CRDI with 366K KM. These regulators dont last forever..!!

[@Cakupik]

Hello, i had the same FPR problem here. Would you mind to share what tools and materials that you have to clean those FPR ? it would be helpful for me to regain my FPR health. Thanks.

[@sfch9870]

Thanks a lot

[@ModestoCabral]

@Mega2012ification Hello, I have the same vehicle and I have the exact same problem. I hear friction-like noise is coming from this regulating valve. Has this happened to you when it failed on you? Thank you so much

[@Mega2012ification]

Usualy it continues to run for a few seconds when turn the key of, then the computer doesn't let it go over 2500 rpm. Sometimes it could randomly die.

[@ModestoCabral]

​@@Mega2012ification Yes, that's exactly what happens to me. The engine takes a while to stop, it doesn't go above 2500rpm and sometimes the vehicle stops running randomly. This week I will remove the valve and clean it, and if it doesn't work I will put in a replacement. Thank you very much for the help.

[@ModestoCabral]

I finally removed it, cleaned it with 3-IN-ONE liquid, and gave it voltage with the battery enough times to get it to act. It has worked, the error has disappeared and everything works correctly. Thank you very much and happy new year from Spain

[@pauloneill8912]

i notice you had the electrical connection submerged, did this not cause any issues? also what cleaning solution did you use?

[@Mega2012ification]

It's an ultrasonic cleaner, it can also clean corroded connections, you just have to dry it out real good before plugin them back in

[@pauloneill8912]

@@Mega2012ification thanks i did this and it worked on mini diesel, cheers

[@apsert]

Mega2012ification Am i correct when i say you had 2 faults. 1. fault, was the Pressure sensor, 2. fault , you needed to Reset the ecu?

[@Mega2012ification]

Yes

[@apsert]

​@@Mega2012ification Thank you! I have same issue. Do you mind if i ask what software/Program you used for laptop?

[@Mega2012ification]

@@apsert autocom

[@tanocruzcampo9343]

Hola ami me sale el p0230 saludos y gracias

[@ladislavsurmaj9942]

Mne to dela citroen xsara pıcasso 2.0 co to je

[@janstejskal4920]

Regulátor tlaku paliva, někdy pomůže vyčistit ale z 90% je na výměnu

[@brianjoelmitrovich5078]

Hola amigo tengo el mismo el mismo problema