Peugeot 407 SW front bumper removal

Today i have made a video of me removing my Peugeot 407 SW front bumper i hope you guys will find this video use full. Also please subscribe my channel.

[@daniellantos26]

I love that people still have these old bangers so it makes it easy for me to do repairs on it

[@marciosilvadesign]

Excellent learning! I need to repair one of my fog lights, one clip is broken and the optic is somewhat loose. I bought new ones and want to replace both. And I want to polish my headlights too, so removing the bumper will allow me do both jobs more easily. Thanks!

[@marciosilvadesign]

Hello again! I tried that procedure with my father-in-law, he is more experienced with cars, and we actually did it. But for the side parts removal (12:55 min) we had to remove 3 screws from the bottom part of the clips. My car actually has more than those clips, has 3 screws on each side. But we removed them and the rest was just similar. Cheers!

[@Mad4FrenchCars]

No problem is your car a coupe version of 407 if so then ya would be additional clips

[@marciosilvadesign]

My car is a normal 407SW 1.6 HDI. Not coupé or anything. Luckily I have an endoscopic camera and attached it to the metal rod / hook to know where to place it and when to rotate it.

[@andresabastante9539]

thanks a ton, I'm strugling a lot with the twisting clips on my coupe. I will try this tomorrow.

[@Mad4FrenchCars]

Not gonna lie a coupe has 1 smaller clip extra on each side i believe aswell. Very difficult to reach. Normal 407s only has 1 big twist clip and coupe has 2 one big and one small i think. Best of luck

[@demonico123456789]

For clip you can use rod from that lift. It’s perfect fit and just twist. Have same car jack and I have used that end, no special tools required.

[@EkaterinaZakharova]

Thank you very very much! 🎉❤😊

[@Mad4FrenchCars]

You very wellcome.

[@nikitanikita2357]

Thanks man you are doing great videos, carry on. Just want to ask, can you make same tutorial how to diagnostic car using Diagbox or similar programs. Thanks mate 👍

[@Mad4FrenchCars]

Thankyou for your comment its always nice to read a good comment. I normally use Diagbox on most of my cars. I will make a tutorial how to use it in a couple of days. Its really easy to use this software and for French cars is the best.

[@damian5748]

Thanks for this Video 👌 👌 evrything i do with no problem !

[@MrWolf-bl8rb]

Thanks for the video, it will be a great help.

[@Mad4FrenchCars]

My pleasure mate hope you find it use full. Please subscribe the channel, loads of videos comming soon.

[@paulroberts5375]

Ace video thank you

[@Mad4FrenchCars]

Glad you find it use full.

[@simonshanly3419]

Nicely Done.

[@Mad4FrenchCars]

Thank you

[@jorgrenner3039]

HI, do you know, if ones have to remove the bumper to change headlights? thanks a lot George from Germany

[@Mad4FrenchCars]

The best way to remove headlights is to remove the bumper and then remove Headlight as some Headlight bolts is covered by a bumper but I know some people did manage to remove headlights without removing bumper I just not know how. Also if you try to remove a Headlight without removing your bumper you risking to break Headlight brackets

[@caslarmestra-yg5st]

El francés que ideó ese sistema de cierre del paragolpes con la aleta se merece que le den un par de collejas bien dadas.

[@pd1jdw630]

Hi, can I get to the window washer fluid motor trough the bottom? Thanks in advance.

[@strigoiudintazlau1262]

Those weird clips on my coupe are probably broken and my front bumper stay a little bit off(low). Do you know how could i fix it?

[@ΝτίνοςΒαϊτσόπουλος]

Good evening very nice video congratulations. The bumper siee is there for purchase because in Greece it does not exist at all and I like it very much

[@Mad4FrenchCars]

The bumper is a standard but you can buy a sp grill on ebay.

[@bartosztrzeciak4690]

Thank you, good job!

[@Mad4FrenchCars]

My pleasure mate

[@bengomez3484]

Thanks you good job 🙏💪💪

[@Mad4FrenchCars]

Thankyou mate, really appreciate it.

[@NicolasHernandezN]

Very informative video buddy! Thanks a lot!

[@Mad4FrenchCars]

Thankyou mate

[@andyc787]

Another superb video tutorial mate, thanks. Will i have to remove the front bumper to remove and replace a front wing?

[@Mad4FrenchCars]

Hi mate, to remove a wing you need to take a bumper off also remove the same side Headlight and you will need to remove one and lose 2nd of bonnet bolts on a same side. Also wheel arch liner needs to be removed.

[@andyc787]

@@Mad4FrenchCars Thank you mate.

[@Mad4FrenchCars]

@@andyc787 my pleasure mate.

[@medkomedko7003]

Muchisimas gracias , a mi me iteresava cuantos litros lleva la caja.,el video hasido muy util.

[@firemanbaptista3000]

good afternoon i need to remove the left front headlight, can you tell me if i need to remove the bumper or not. thanks

[@Mad4FrenchCars]

Hello in order to remove a headlight properly you need to remove a front bumper. I have some friends who told me that they removed a headlight without removing a bumper i havent managed myself so i would recomment removing bumper

[@Mad4FrenchCars]

Then i replace headlight i remove bumper as i dont want to break headlight clips as its bolted by 10mm bolts in 2 is behind a bumper

[@firemanbaptista3000]

@@Mad4FrenchCars thanks for the help, then i will have to remove the bumper.

[@Mad4FrenchCars]

@@firemanbaptista3000 ya once bumper removed is really easy to replace and no risk to brake a geadlight clips.

[@smirnovv100]

Thanks a lot for useful video!

[@Mad4FrenchCars]

My pleasure mate. Many more videos to come still

[@smirnovv100]

@@Mad4FrenchCars . It's great! I have such auto - 407SW (2007). And I also like to do repairs by myself (sorry for my English, I think you understand me)

[@Mad4FrenchCars]

@@smirnovv100 english is not my first language either mate. I fully understand you and i love to work on my cars to it saves a lot of money and gives a satisfaction then job is done. Tommorow i will be making another video.

[@jacqueshomsy8797]

excellent thanks

[@Mad4FrenchCars]

You wellcome mate glad it was usefull.

[@dougsmonsters4866]

Loving these vids pal. Learning so much thanks. Gonna be adding some automatic mirrors next month. Second hand lol. Now any breakers for or is it just go looking? Also, is it possible to fit the apmisferic dump valve or shall I leave that mod out?

[@Mad4FrenchCars]

Hi mate which year is your 407 also do you know what spec as in a prefacelift most 407 had auto folding mirrors as standard. In faselift the only one who had non folding ones was SR spec.

[@Mad4FrenchCars]

Sometimes you might have electric folding mirrors it just have to be activated with Diagbox or Peugeot planet software.

[@Mad4FrenchCars]

With a scrapyard you just have to shop around and see who has what. But I would recommend to join Peugeot 407 UK Facebook group there is so many 407 owners someone will have a pair of mirrors which will be good for you.

[@Mad4FrenchCars]

I have never seen apmisferic dump valve installed in a 407 what engine is in your 407.i would love to see results myself I never done it so wouldn't know much about it.

[@dougsmonsters4866]

@@Mad4FrenchCars Its a 2008 hdi.

[@waldevv]

Good video, seems like almost everything would apply to coupes as well. Clearly the fender clips are already broken on mine as the panels don't like up and the bumper 'droops' a little. Probably need to do this to get much easier access to the front parking sensors, everything is just a little packed because of the V6

[@Mad4FrenchCars]

It would be very similar in a coupe. Coupe have a few clips extra need twisting on a sides.

[@waldevv]

@@Mad4FrenchCars yeah I took a look and seems like the top clip is broken and there's 2 of them right below the headlight. Was able to bend a coathanger into a tool like yours and I managed to rotate the bottom one off but for the life of me I can't get it to turn back so I made the situation a bit worse. I'm pretty sure it's lined up but I'm not quite sure why it refuses to turn, I can even get my hand there from underneath the car but even with my fingers I can't get the leverage needed

[@Mad4FrenchCars]

@@waldevv those clips are horrible invention. Unfortunatelly have to try to pull towards yourself and twist at same time that's the only way

[@Michal_Sobierajski]

That's a lot of work 🤦🏻‍♂️ Any other way to fix left lamp inside mount?

[@goantageorge8352]

For removing the radiator i need to remov the bumper?

[@Mad4FrenchCars]

Hello for the 407s with most of the engines including 1.6hdi,2.0hdi and many more its enough space to actually remove a radiator without removing a front bumper. It comes out from a engine bay side and its only held in place by clips. You would have to remove all coolant hoses fro. Radiator and then intercooler hoses becouse they would get in a way. And then you could take radiator out. Even a things like radiator fan can be taking out with priming top of the bumper off but without actually removing it.

[@filipecosta7952]

So easy to work on the 407... When is you that are doing it... 😁

[@Mad4FrenchCars]

Once you try it once next time is very easy

[@tuxamiga2077]

Parfait, merci ! 👍

[@Mad4FrenchCars]

Thank you.

[@dylan3657]

do you have any tips for removing right hand side front fog light on a 407

[@Mad4FrenchCars]

Well if you remove a bumper then to remove a fog light becomes really easy. If you want to remove a foglight without removing a bumper it might be quite complicated. You would have to remove a shield surounding a front right wheel arch, then you would have to undo two bolts or screws holding a buttom of foglight in place then you would need to sisconnect a foglight connector and then you have to pull the bottom of the fog light needs to be moved towards the back of the car so that top could come out of its place but the problem with a driver side one is that a windscreen washer liquid container is right next to it so it might not give enough space to move the bottom backwards in wich case the top clips wouldnt come out of its place. I would personally remove a bumper and then take it out

[@dylan3657]

@@Mad4FrenchCars ok thanks

[@patricksoyer5665]

merci beaucoup

[@damircalic1491]

the name of the grill please.

[@Mad4FrenchCars]

It's called sp grill. Sometimes you can find it on ebay

[@damircalic1491]

@@Mad4FrenchCars merci buku

[@walthermauser5161]

Do i need to remove a whole bumper so i can replace that chrome plastik left front spoiler?

[@Mad4FrenchCars]

Its possible to do many things without removing a bumper like take a headlight out, take a lower crash bar off, take a fog lights off, take a grill off but the fact is its much more easyer to do it then a bumper is removed. The only thing would be difficult to remove is top crash bar as bumper sits on it and clips in but also possible to do. So it all depends how complicated you want to make it for yourself.

[@walthermauser5161]

@@Mad4FrenchCars thank you.Can i remove it from the outside,or i need to open the hood? It has some scratches on it,i want to install new one.

[@Mad4FrenchCars]

@@walthermauser5161 are you talking about the one with peugeot badge or actual grill

[@walthermauser5161]

@@Mad4FrenchCars no no, there are two plastic spoilers on the bumper. Left and right. There are also two in the back.

[@Mad4FrenchCars]

@@walthermauser5161 oh so you mean a bump strips on a corners if so then a they are a pain in a ass to remove and best done then bumler is off as you need to press clips to get it detached from the bumper. I have done it before but only with a bumper off as there is a chance you can brake a chrome if you just try to rip it off from outside

[@grzegorzgibaa6889]

Nieodzowny filmik do obejrzenia by dostać się do wentylatorów i je wymienić.

[@Mad4FrenchCars]

My pleasure mate, i am glad you find it use full.

[@iskenderkaymakli1748]

izlenmesi için Türkiye kısmını eklemelisin

[@날맹이]

철사로 하지 말고 500원짜리 공전만한 와샤를 준비. 1 와샤 평면 약간 옆에 90도로 긴철사(40cm)를 용접. 2. 와샤 구멍 위,아래로 초경으로 조금만 파낸다. 3.고정용 브랏켓에 끼워 가며 초경으로 구멍을 넓힌다. 게임 끝!!

[@Mad4FrenchCars]

내가 미래에 시도 할 좋은 생각처럼 들린다. 감사합니다

[@ВдВ-б1ч]

Создатели этой машины 🤡