Peugeot Partner/Citroen Berlingo CV Joint Kit Replacement

[@gordonstevens6050]

This chap knows how to make instructional videos. No yaking Does the job and films it Well done and thanks

[@PandzaMan]

This is possibly one of the best DIY mechanic videos on KZbin. No stupid music, no extraneous drawn out commentary or filler bits of footage. Perfect for people who need to get the job done with clear instruction. Only thing that would improve is when the clips holding the boots on were crimped - would’ve been nice to have seen true tool - also at the beginning maybe layout on the ground the tools/ parts needed to complete the job (nothing worse that taking your car to bits and having to rely on your missis to drive you to the parts shop 🤭). 👍

[@zammitfranck8990]

Bonjours, Peugeot n'as pas prévu d'outil spécifique pour l'agrafe d'écrou de moyeu! au tournevis ou à la pince bec long fonctionne très bien. pis moi aussi çà m'arrive d'avoir ma femme qui m'aide en mécanique. le pire c'est quelle çà! 🤣🤣

[@adellenm25]

straight to the point, no messing. brilliant 👍

[@justinf1343]

Great tip to break the drive shaft nut whilst the wheel is still on the ground👍

[@TonyG-iu4td]

Very helpful video. I like the way you showed everything without skipping bits. Thank you

[@mrthomasburns1]

Thanks helped a lot start to finish brilliant and great camera work

[@albertoascari2542]

Clear Video. Thanks for showing all the steps. I am going to do the otherside 10 months later.

[@crigeorge9549]

6:30 you sure it's not a cut?

[@albertoascari2542]

Thanks for this I will try Cv change with the driveshaft in situ. I followed this and it worked great. Job well done

[@alijahcurtis9059]

I guess Im randomly asking but does someone know a way to log back into an Instagram account..? I somehow forgot the password. I love any assistance you can offer me.

[@jackbodhi8064]

@Alijah Curtis Instablaster =)

[@alijahcurtis9059]

@Jack Bodhi thanks so much for your reply. I got to the site through google and I'm waiting for the hacking stuff now. Seems to take quite some time so I will reply here later with my results.

[@alijahcurtis9059]

@Jack Bodhi It worked and I now got access to my account again. I'm so happy! Thanks so much, you saved my account!

[@jackbodhi8064]

@Alijah Curtis you are welcome :)

[@marcinmarcin2964]

Jak dla mnie to jak najwięcej filmów o tym aucie

[@charryedios5994]

Very useful! And no banal commentary...much appreciated. Thank you. :-)

[@pauloatalaia]

MUITO OBRIGADO MEU AMIGO ME ECONOMIZOU 300,00 REAIS, VALEU...!

[@wepipe]

Excellent. Confident to do that job now. Thanks.

[@francis.mirage21]

très bon travail avec rapidité merci pour cette vidéo,

[@luispendragon6551]

Just pure action. Thanks!

[@Arielquiñones-g5e]

Exelente exelente un abrazo desde San Luis capital

[@alant8595]

Good video. Keep them coming please 👍

[@alam7693]

Nice camera work

[@screwsnutsandbolts]

Great job !

[@guddupappu3582]

ScrewsNutsAndBolts thanks

[@screwsnutsandbolts]

@@guddupappu3582 You're welcome :)

[@bubnovaniklecany1]

Thank you, I did it on my Citroen C8 yesterday.

[@albertoascari2542]

I did same on C5

[@Scotkruz]

How long did it take?

[@zeez3139]

Brilliant fix ! Do you remember how much the new outer CV joint cost ? Thanks

[@guddupappu3582]

I bought from ebay for £15.00

[@bill84]

Excellent vid will do my shitroen berlingo today

[@crigeorge9549]

how easy. 6:35 On a megane2 I clobered that cv joint for over an hour with the big hamer until that circlip finaly let the cv joint out.

[@taoufikbouazzati9569]

Same here, an hour just passed and I still haven't got it loosen

[@alexmorgan3435]

Not the circlip but corrosion between the splines holding it in place meaning the two surfaces will be very difficult to separate. Should have been assembled with anti-corrosion paste, a light smear of copper slip or marine water repellent multi purpose grease.

[@johnb9561]

Any idea how much this would cost at a garage?

[@mesaiahmedmurzaga536]

عمل نظيف و متقن احسنت

[@fistpumpfpv5074]

Michael myers excellent video

[@ssss-df5qz]

Can someone get my man an impact?? Like everyone has said, good there's no talking but I reckon putting tool sizes on the screen as you use them. Or showing the tool to the cam would polish these right off

[@guddupappu3582]

@@ssss-df5qz thanks for your feedback

[@iosifturcanu9102]

Bravo meserie 👍👍👍

[@iankendrick5753]

Great video .... thanks

[@axel51849]

Bonjour, c'est quelle taille de douille pour demonter les 2 vis de l'étrier de disque ?

[@TonyKomaMusicSweden]

Good video but that breathing tho 😂

[@AKalaj]

No need to take of the stabilizator link?

[@lescooper5224]

Thank you

[@saeed1akuk1]

Good work

[@ferrari1418]

Super 👍

[@marcinmarcin2964]

Dobra robota

[@guddupappu3582]

dzięki

[@davidi2200]

What was the problem, noise from the car ? Thanks

[@guddupappu3582]

it was make a noise when I turn

[@roh007]

Thanks for sharing 👍

[@pawepablo2098]

Excellent

[@danw9096]

No abs ring? Did this to my citreon berlingo mk2 and it threw the abs light on

[@guddupappu3582]

Abs ring on the bearing in these models not on the CV joint

[@danw9096]

I couldn't remember whether or not it had one on when i took the old one off lol but I did change the wheel bearing also so maybe broke a wire would you know if you have to have the light reset with a machine

[@guddupappu3582]

@@danw9096 does light came after u changed the bearing ?

[@danw9096]

Ye changed cv and wheel bearing came across your vid and noticed you didn't have a abs ring on your cv so had to ask

[@danw9096]

Appreciate the replys also 👍

[@Ukash83]

Will this be similliar in peugeot 206?

[@guddupappu3582]

Yes

[@Guderian1939]

Hi can anyone help. I was today changing the lower ball joint and forgot to tie up the assembly. I pulled the drive shaft out of the cup on osf. I pushed it back in but having trouble aligning the new ball joint with the lower arm. About 2 cms away from the hole. Any ideas anyone. ???

[@guddupappu3582]

Hi I am sending you link I hope that help you kzbin.info/www/bejne/fnenqYlpq6-VsKM

[@firozpurathottathil7535]

Thankyou thankyou ,😍👍

[@ciprianbartalis2515]

God way to do this job .

[@awsomefnafbirds1804]

Very good yaar

[@misterzee5736]

Should have shown us the step where you removed the drop link upper bolt, allowing you to slide the strut into the hub easily. Extremely important step. Thanks otherwise for a good vid!

[@keithwright7259]

he didnt remove it but managed to squeeze it out anyway!

[@misterzee5736]

@@keithwright7259 he removed it which you can see at 12:50. You shouldn't contradict what i wrote with false information as it could mislead the unaware.

[@keithwright7259]

@@misterzee5736 i think you will find its the poster thats misled the unaware not me, dop link is off by 3,50 wether its required or optional is unknown

[@spike5925]

Hey dude ! Are you smoking ? That breathing !

[@masood3096]

Can write all tools size please

[@guddupappu3582]

For tyre 16mm, hub nut 36mm, suspension pinch bolt 18mm

[@masood3096]

@@guddupappu3582 thanks bro

[@Ppp-kk6hw]

Dink dank doo for me

[@Ihyseth]

breath

[@alexmorgan3435]

You didn't use any Plusgas or WD40 when undoing the nuts and bolts which would have helped them turn more easily. You didn't use a torque wrench for the hub nut which needs to be done up bloody tight to 280Nm. Again the old CV joint came off the splined drive shaft bloody easily. You are so jammy.