PEUGEOT RCZ GHOST PADDLE SHIFT INSTALLATION V1/V2

[@Sly_Wolf_1]

Four years late to the party but what great video! Probably one of the best installation videos I've ever seen. On a side note I noticed you don't have a standard key, may I ask how you went about the key upgrade.

[@OzzDylan]

thanks for the video

[@slavkovukmanov3278]

Thanks for such a detailed guide! I have a question though: In P5008 (with EAT8) for instance, you don't have to move your arm from the steering wheel in order to manually change the gear (so no pulling the gearstick to M position is required). Just the touch on + /- is enough to change the gear even if it stays in D position (not M). Can that be achieved with your module as well? Cause if I'm going into this (not so cheap and quite some work) upgrade, I'd like it to function as the original ultimatelly... TIA

[@heyyou6101]

Is this kit still available??..can i use on peugeot 206 with al4 gearbox?

[@thegojira444]

Perfectly clear explanation. thanks for the video! All clear for me except the part at minute 20.00, I did not understand that part. What cables did you connect to the shifting cable?

[@estorilblu]

Hi thanks, you will receive a detailed wiring diagram which comes with the kit thank you.

[@EmirFaruk]

Alıp denediniz mi?

[@peterglausiuss5964]

¹

[@biggiesmall80]

This is a cool mod im off to order :-) Rcz a very underrated beauty of a 🚗 🚘 would be keen to hear/see some other mods for this car

[@ExOduSxb]

Hi, does Peugeot RCZ use AM6 (Aisin tf-80sc) gearbox? Could this kit be used on Citroen C5 3.0 hdi (I think it uses the same gearbox)? There is a comment for P407, it should be the same.

[@ayethuyamin5960]

Hello can use for 5008? 🥺plz

[@jegadish2741]

can i fix to 207 sedan?

[@jordydharmawanlira8827]

Hi i wanna order this, where can i order

[@estorilblu]

Hi please search Ghost Paddles on Ebay thanks.

[@oachidori]

Can i have an answer please, what i want is only to know the wires i have to connect in my car because as i said there are different colors, or what to measure to find out the correct wire. Please answer me, you told me that it is possible to be mounted to other cars too at least having the same gearbox. Thanks for a quick answer. I send you the message via ebay but no answer from your side!!

[@resepimasakanmaktam2066]

Can use for Peugeot 5008 MPV?

[@berkdenizkayikci9111]

will old manuel mode work properly ?(downshift from gear knob etc) thanks by now.

[@estorilblu]

Hi yes the gear knob will still work as normal thanks

[@berkdenizkayikci9111]

is it still possible to find a kit like that?

[@estorilblu]

@@berkdenizkayikci9111 Hi yes on Ebay rover.ebay.com/rover/1/710-53481-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=154211518772&ipn=psmain&icep_vectorid=229508&kwid=902099&mtid=824&kw=lg&toolid=11111

[@EmirFaruk]

@@berkdenizkayikci9111 denediniz mi?

[@berkdenizkayikci9111]

@@EmirFaruk Merhaba, pahalı olduğu için almadım.

[@טוהרכהן-צ3ח]

is there a way to somehow decrease the shifting delay and make it more snappy i am aware its not dual clutch but is that possible ?

[@estorilblu]

Hi great question I would say unfortunately not, but you could always ask an expert in chipping ecu's they can sometimes manipulate the program in the engine and gearbox ecu to be more responsive.

[@samyap2980]

hey bro can install on peugeot 208 also?

[@estorilblu]

Yes you can

[@clearsful]

nice bro.

[@oachidori]

i bought this kit in order to put in a 407 having the same gearbox but the color of wires are different. Can you give me an email address to put same questions in order to succeed mounting the kit?

[@estorilblu]

Hi message through ebay please

[@oachidori]

@@estorilblu message sent