[UNBOXING] CYMA CM.041SD6 High speed edition

[@walnutwhipr7711]

I have a jg sd6 from TG and purchased a metal cyma sd silencer like the one that comes with this model. I added an acetech lighter s inside this and it works fantastically and is perfect for indoor cqb. Also able to fit a 11.1 nuprol 3 stick nunchuck within the handguard along side gate aab mosfet, should be the same size area as the cyma. Loving the videos by the way!

[@knightairsoftwarrior]

Is there a way to dissemble the suppressor?

[@SBUafroNinja]

Cyma has been doing a great job lately, especialy on their internals!

[@aholycrusader2681]

Agreed

[@valkam1344]

Hey Pheas you're quickly becoming my favorite reviewer! As I am a new viewer I havent seen much of your content from outside of these virus times but I cant wait to see more!!

[@DevinGhillieAirsoft]

Awesome content! Subscribed! Can’t wait to have a nice MP5 SD in the US. I ordered it over seas.

[@Angrypanda68]

Another good unboxing and good to see that sometimes guns are so simple out of the box .....shame the manual doesn't help much ...look forward to the disassembly video ....and looking forward to seeing the Dytac taken apart and the unboxing of the Arcturus AK ...keep up the great work

[@leeshaw3296]

Hi you will find the hop up adjustment at the right hand side of the charging handle, You need to pull the cocking handle back and lock it in place and use the Alan key through the hole on the right hand side of the cock handle hope this helps.

[@PheasAirsoft]

I contacted Taiwan gun who had a look at my videos and confirmed that the hop adjustment arm is missing and they are sending me another one with my next order! Which is good news. Pheas

[@j4y.n1]

Pheas Airsoft damn they should have did a check before selling it tho

[@mrhovoxo7236]

vMxstiic Fortnite kid

[@FlowState.Racing]

When you have to tell yourself to calm down a bit, you know it was a worthwhile and fun purchase! Nice unboxing mate. The MP5 has been a fave of mine since I first saw one. Deffo on my list although that fire selector looked really cheap and kinda lets that one down a bit.

[@gen-zboomer]

Damn, I was looking at getting a CYMA MP5 and I'm totally sold, for a sub $200 OOTB gun that's an incredible ROF and trigger response.

[@ethansykes9373]

Another amazing vid dude. You are a massive influence on what I buy in terms of airsoft guns so thank you for that. I might get that mp5 and do a little modification.

[@MrDeekstar]

I picked up a CYMA blue edition and my selector was pretty gritty and a bit rough, the gearbox shell looks sand cast its a pretty rough surface, I have sanded and polished the shell under the selector plate and its now 100x better

[@thanmoiin8868]

Is there an attachment that you can buy to mount a scope onto the gun? Looking on Taiwan gun and can’t find one.

[@PheasAirsoft]

There is a a couple of options. There is a claw mount that TM used to make that gives a raised rail to mount something on. Then cyma and JG do make a rail attachment to allow a scope etc. Then there is also an lct one that gives you a long rail. www.fire-support.co.uk/product/lct-lc034-lowprofile-scope-mount-with-85-inch-picatinny-rail That's the lct one, should (but can't guarantee) fit on an MP5 www.amazon.co.uk/CYMA-MP5-Low-Profile-Mount/dp/B00BCLB53C That's the CYMA one, can't find the TM one but seem to think the TM one needed a rail adding to it. Hope that helps. Pheas

[@thanmoiin8868]

Pheas Airsoft thank you so much this helps me on another level ahaha!!

[@MrHogann]

Nice gun! Own my self a cyma (CM.515) and never let me off.

[@SmidgeTheDictator]

12:15 he makes a nice aeg noise :D

[@ScorchMat]

7K Celebration!!!! Congrats Pheas!

[@DeeJaye8920]

Love the CYMA MP5 variants wish the u.s got to carry them congrats 7ksubs

[@bexyd5750]

I just imported one from taiwangun.com, I got the regular sd6 blue edition because I’m installing a polarstar jack in it but the gun itself was $130 and with shipping it came out to $187. In my opinion the cyma mp5’s are much better platforms than the umarex mp5 competition

[@michaelroginski2316]

Do you keep the rifles you review? or give them back like other KZbinrs?

[@dilbertduck]

He actually buys them then sells them again

[@PheasAirsoft]

Dilbert duck is right. Between my friends and I we buy them and then sell them on or if they are my friends they keep them. Pheas

[@Derek__45678]

Does the capacity of a lipo affect performance? Your 11.1v 3200mah outperforms your 2200mah

[@PheasAirsoft]

Hiya. The capacity (mah) just determines how long it will last / run the gun so the more mah the longer you can run the gun between charges of the battery. The C rating of the lipo and the voltage are what determine the rate of fire and how snappy the motor can respond to your trigger pull. The battery won't effect the FPS or range of the aeg. Hope that helps. Pheas

[@xiaohuli27]

That's a really nice gun 😍 CoD4 flashbacks incoming

[@OhukaisMies_54]

get up!!! WE ARE LEAVING!!!!

[@xiaohuli27]

@@OhukaisMies_54 Right...what the hell kind of name is "Soap", eh? How'd a muppet like you pass selection?

[@RekzysTheTitan]

Xiao Huli favours of a sexual nature...

[@xiaohuli27]

@@RekzysTheTitan guess he dropped the soap

[@bigboi1505]

I am not sure if you know of the top of your head, but would it be possible to simply switch the sd6 handguard with an a5 style handguard or is the front sight assembly and such a little different?

[@PheasAirsoft]

Hello! It would need the complete front end as the SD versions have a front ring thing that integrates the front site. You need that ring to support the handguard otherwise it just flaps about. So swapping the whole front end would work a charm, not just the handguard unfortunately. Pheas

[@bigboi1505]

@@PheasAirsoft Awesome thanks for the info and the timely response!

[@andrewmayne2437]

Hi Pheas, as you tried an 11.1 lipo on this gun, would you recommend using one on the CM041 Tactical?

[@PheasAirsoft]

Hiya, thanks for the question. I will be honest I wouldn't run it on an 11.1v. I am not entirely convinced that it would hold up very well for very long, unless you were going to run it on semi auto only, then I would expect it should be ok. Would be interested to hear if anyone else has an opinion or experience. Pheas

[@andrewmayne2437]

@@PheasAirsoft Thank you Pheas. Just put a 7.4 in for now, as I was struggling to put the original battery in the foregrip. Enjoy your videos.

[@BigMarcSosa]

For anyone who has one ? How's the build quality ? Does it feel solid ? I'd like to get the VFC one but it's hella expensive. If this one feels solid I'll settle for that one.

[@cvupix2936]

it's amazing for the price :)

[@williamholmes8137]

You will find the hop on the top the rifle Pull back the charging handle about an inch behind that your see a small hole insert the Alan Key i to hop up

[@AirWolf2301]

Long live the CYMA!!! *pog*

[@LingardJoe]

7K for the win here's to many more !

[@andrewwhewell2971]

Win again?

[@andrewwhewell2971]

These videos are amazing

[@sawyerjennings2561]

HERE FROM GIVEAWAY!

[@Ironcurtainproductions]

I would love it cyma made a G3 now lol

[@PheasAirsoft]

Now you are talking my language! With a metal body too would be amazing! Pheas

[@hb3n164]

congarts to 7k pheas!!

[@darkshock42mlg05]

Im planning on getting one of these because i need a gun with a qc spring so i can use it for night ops. Nights ops fps limit is 310. For daytime here in the usa, 450 at 25 ft. 300 fps and below has no med. This means my 350 fps cyma aks74u is subject to the same med as someones lct ak47 ootb but not the end if the world. However i cant use it at night ops. I will also wont get the sd because i need a tracer. Still either way this thing rips on even a 7.4. Im currious if i can fit my ak 7.4 20c 1000 mah in it. It's short so it probablybwill work but i will want a nunchuck for a longerlasting battery

[@rattymcraticus562]

Looks awesome

[@zullgore]

keep up good work

[@3xy575]

Can add attachments to it like a under barrel or a sight

[@larnoldthespaceguy]

cyma is great change my mind

[@DEADEYEAIRSOFTPH]

Very nice my friend, drop a like sir.

[@OhukaisMies_54]

awesome video dude :D gotta love a MP5 oh and btw will we see a dissassembly video of the cyma AKM u got in the last taiwangun order

[@PheasAirsoft]

I have filmed the unboxing, just need to edit it. It's very very solid inside. CYMA are keeping up the top quality work! I'm almost tempted to keep it ha ha. I will release it in the next couple of weeks. Pheas

[@andrewwhewell2971]

Cyma are the best

[@sammassey9694]

Love this gun

[@darkmistentertainment2819]

Great review

[@thatukguy156]

My first airsoft gun was a mp5 i do miss it

[@billygoodwin6295]

1) how long does delivery from Taiwan gun usually take for the uk? 2) I’m guessing that they don’t do two tone...

[@tomkarlsson1]

To Sweden its about a week so I'd guess its about the same for the UK

[@billygoodwin6295]

Tom Karlsson Ite cheers

[@zlatomirdaskalov7372]

Good luck once again everebody :D

[@lr3m743]

What material is it made from?

[@platinum437]

Doesn't get much better than the mp5sd other than the m904 of course that is the best gun

[@commandoquackers1910]

Again awesome video as always buddy! Been looking for a good video on this model and well you blessed us yet again! p.s thank you again for your answers about Taiwanguns :) Ryan

[@gypsyairsoft209]

Nice video dude 👌

[@callsign_armistice7168]

Very nice i own the same one

[@krowdkillaoscar3259]

Where did you buy this from? Do they ship to the US?

[@PheasAirsoft]

Hiya. I got it from www.taiwangun.com unfortunately it doesn't look like they ship to the US. That's a shame as that could be a big market to access!! Pheas

[@aggelosblmp4637]

Can you unbox the cm028?Nice video tho!

[@lukebyrne610]

Hey pheas what were the dimisons of that blue battery

[@PheasAirsoft]

Good morning. The battery measurements (in mm) are 94.3 x 30.5 x 13.4 mm hope that helps. Pheas

[@lukebyrne610]

@@PheasAirsoft thank you very much

[@PheasAirsoft]

@@lukebyrne610 no probs at all. If you want a link to the actual battery it's here: www.componentshop.co.uk/7-4v-1600mah-20c-continuous-discharge-lipo-battery.html Pheas

[@pres002]

no purchase links? dam I want a mp5 or mp7 but I heard the mp7 aeg is trash and breaking. so mp5 it is

[@PheasAirsoft]

If you want a link, its this one specifically: www.taiwangun.com/en/electric-3/cm-041sd6-high-speed-cyma The aeg MP7 is ok at best but will not perform as well as a normal aeg like this without upgrades and tweaks. The GBB mp7 will fair better. But this is a solid piece of kit and well worth the money! Pheas

[@grzegorzwrzosek3660]

I read on taiwangun that upper body is ZnAl

[@zoot.zooski]

Ayy good luck

[@isaacshively6705]

Always wanted a SD5, I don't like the collapsible stock

[@gm_construct8024]

Imagine this beast with drum mag

[@PheasAirsoft]

You know what, I am not always a fan of drum mags, but something about the SD version of this and the high rate of fire would work really well with a drum as an overall look. But just for the laugh of it! Pheas

[@gm_construct8024]

imagine someone kills you with a double drum mag and when you respawn he stills full auto with no stop

[@Hazztech]

wish it had the older version stock on it.

[@PheasAirsoft]

Hiya. Do you mean the full stock? Or a different sliding stock? Pheas

[@ronlancs1874]

Do you reckon you could fit the ris rail to this model?

[@PheasAirsoft]

Hiya. I think if you remove the handguard structure (it just screws over what appears to be the normal front end of an mp5 then I would have thought that you can add a ris, the surpressor might have to stay though as there is no threaded outer barrel on it! Pheas

[@ronlancs1874]

Pheas Airsoft cheers mate, trying to re-create my cod loadout.. 🙄

[@PheasAirsoft]

@@ronlancs1874 I would love to see that! I used to do a captain price one from the original release of cod 4, including tash/beard. Also did a Gaz one from the same game! (Loooong time ago now!) Pheas

[@ronlancs1874]

Pheas Airsoft mmm me too man! Haha and noice! 50 thousand people used to live here....

[@PheasAirsoft]

@@ronlancs1874 best cod they ever made!

[@sgt.miningdrill2680]

wanted to buy one myself but out of stock

[@voiei6574]

Is this good at outside game

[@PheasAirsoft]

Hiya, I never got the chance to use it outdoors, however the person who bought it said at first it was a little all over the place, he cleaned the barrel thoroughly and then it was significantly better and he was more than happy with it in an outdoor / woodland setting! Hope that helps! Pheas

[@voiei6574]

@@PheasAirsoft thank you!

[@corbancoyle6178]

Shheeeeeeeshhhhh

[@birtalanlorant5572]

Easy win!

[@maxfuller7479]

3rd time lucky!

[@kingsafehands1067]

look nice

[@mathiasritschl]

Would be amazing

[@sammassey9694]

Let's aim for 10k now

[@greenie2407]

Any idea what the fuse amp is in a cyma mp5 as I can’t find any info on this🙈

[@PheasAirsoft]

Hiya, I think they are 25amp fuses. The reason I say this is because I have worked on a CYMA AK over the weekend and a CM.506 and both had a 25A fuse in it. So I would guess its a safe bet that its the same. Hope that helps. Pheas

[@greenie2407]

Pheas Airsoft thank you 👍

[@codyairsoft8532]

Yo hello how are you doing today bro if you are good that is nice to know

[@cal5707]

Nice

[@tomaszamora1403]

😍😍😍

[@joshuaheath3866]

Question I have one of these and I'm worrying about fps do u guys know what it does in fps

[@Oscar-xw7nt]

Do you still have the box? And if you ordered from Taiwangun, you can chose your FPS to suit your area and they come with a piece of paper with testing of the FPS

[@eugeneryanndinglasan3043]

What is the ampere of your fuse tanks

[@PheasAirsoft]

Hiya, I am pretty sure they are 20amps. Pheas

[@mikeharris8808]

Love mp5

[@BboyCreed]

Anyway to get this in the US?

[@PheasAirsoft]

A few people seem to be desperate to get this into the US. I hope you find a way! Pheas

[@buurp_yt9733]

Ello. 7k

[@valentine4287]

Been debating an mp5

[@andrewwhewell2971]

Would be cool

[@ArchieKeen1]

Shame with the hop up, maybe the person at taiwangun who was downgrading accidentally forgot to screw the hop adjustment arm back on?

[@PheasAirsoft]

It didn't look like there was anything missing off it to be honest. Plus I can't see they would have had to remove the hop to downgrade it. It's not all bad though, you'll see on Thursday when the disassembly arrives. It's just a bit fiddly. Pheas

[@SurvivalHiker]

This edition includes a mid-cap magazine with a capacity of 130 BBs, so I think the blue edition is much better and cheaper ;)

[@sammcguinness]

Nuh uh

[@AbikersPOV]

hey, i asked a store about what 11.1v batteries they have in stock that fits in the compartment and they said that if i put a 11.1v battery in it, i will lose my waranty. did you upgrade the gun to receive 11.1v battery or is it ready out of the box to receive the 11.1v? i'm happy with the 7.4v rof but we all know we want the best out of our replicas.

[@PheasAirsoft]

Hiya. They often put restrictions like that on the guns as the 11.1v will put more stress on the gun and cause it to wear out more quickly (regardless of internals) than on a 7.4v. the internals as standard out of the box will take the 11.1v but it's like any other gun they will fail earlier than using a 7.4v so it's weighting up what you want against the life expectancy and making your choice. If it was me I'd run 7.4v until the warranty has ended then do what I wanted after that. Hope that helps. Pheas

[@AbikersPOV]

@@PheasAirsoft yeah, helps alot. thanks for the info. keep up the good job on the channel.

[@hau5387]

Pog

[@chrisberry3048]

I bought one about 2 months ago

[@PheasAirsoft]

Are you happy with it? Pheas

[@sammassey9694]

7k giveaway!!

[@andrewwhewell2971]

I need this patch

[@733ETY]

maybe i win my first patch..

[@michaelsmith2596]

Winner chicken dinner

[@hudboys8120]

9:23 he liked it so much that he turned into pennywise🤡

[@hoover8638]

MP5 ❤️

[@sammassey9694]

Hello from Ireland

[@gwenaellefurnemont3330]

Hello the model is 360 fps thancks

[@CramSword420]

where on earth did you find this lol

[@PheasAirsoft]

Hiya ha ha ha. I got his on Taiwangun.com Pheas

[@billygoodwin6295]

When’s the next giveaway?

[@PheasAirsoft]

I'm just waiting for my patches to arrive. They are running late. As soon as I have them I will launch it. I've got two to do. One for a tracer unit and tracer rounds and one for a red dot sight. Pheas

[@billygoodwin6295]

Pheas Airsoft can’t wait thanks for doing these...

[@gwenaellefurnemont3330]

Hello nikel video ,there are 2 version 360 fp and 320 fps, you 360 fps ?

[@PheasAirsoft]

Hiya. It was the higher fps one that they have lowered slightly for me to 350. Hope that helps. Pheas

[@AirBorne10192]

I’ve been trying to find a mock suppressor for my HK MP5SD6 to replace the original one with the orange tip..anyone know a website that sells it by chance?

[@liabilityluke6665]

I got mp5 and a g3

I swear there's no MP5 with a navy lower that has a decent selector. They all suck.

[@guardsmansteven4128]

7k lids

[@tshoreproductions9184]

Anyone from the states know a good site that has these, that’ll ship these?

[@tomkarlsson1]

taiwangun.com

[@thanmoiin8868]

Just shoot at a cardboard box? A corigated one only tho the others rebound

[@PheasAirsoft]

Thank you for the suggestion. I looked into this, but my garden would only allow 6 meters (at the most) of range and I spoke to the neighbours they don't like and don't want me to be shooting, so its a no go for me for now. But appreciate the suggestion. Pheas

[@sammassey9694]

What's crackin

[@andrewwhewell2971]

Honestly