Forging Arrowheads - BorntoForge -

  Рет қаралды 769,123

Phoenix Forge

Phoenix Forge

Күн бұрын

Пікірлер: 119
@fightinandirish
@fightinandirish 3 жыл бұрын
So much work for the humble arrow head to end up God knows where. Great stuff.
@peteryoung9044
@peteryoung9044 6 жыл бұрын
Thank you for taking the time to make this!! Super helpful to see the different styles and strategies to take on each type.
@dajimdajim2338
@dajimdajim2338 5 жыл бұрын
I
@arklanuthoslin
@arklanuthoslin 7 жыл бұрын
and in a single day of fighting they'd use, and not recover, how many of these?! oh my heart...
@HipposHateWater
@HipposHateWater 7 жыл бұрын
Now you know why I cherish my sling.
@leeknivek
@leeknivek 7 жыл бұрын
? why would they not recover them? there is likely a week's worth of work just to make the iron for, say, 50 heads. then the forging, the hafting, the flighting. purchasing arrows perhaps would have been even more expensive than it is to go out today and purchase rifle bullets - because everything was done from scratch on such a small scale.
@stefanodogg280
@stefanodogg280 7 жыл бұрын
How many bullets do modern fighters recover? The price of war
@randomcow505
@randomcow505 6 жыл бұрын
super late reply but the casings usually are recovered by someone especially in poorer countries as they can sell the brass on or use it for something else, or reload them if they have the equipment and this can net them some kind of living the reason bullets themselves aren't recovered by some poor sod is because its not worth it, they are usually embedded deep in something or another so can't really be recovered arrows on the other hand will have a nice wooden marker sticking out of whatever they are stuck in and lets say you are some poor peasant living close to where a battle has happened or maybe a soldier going around picking up the spoils of the battle, why not grab the arrows? someone or other is gonna buy them from you maybe a fletcher looking to get some cheep heads or a hunter looking for some cheap arrows I mean dont get me wrong, im sure millions of arrows went un recovered, but Im sure many of them were gathered back up by someone and reused
@ateleskier7066
@ateleskier7066 5 жыл бұрын
@@leeknivek They were usually recovered. People were paid to fetch them, including digging them out of corpses (often horses). Arrows were very valuable due their cost as multi-person assembly items: bodger (shafts), blacksmith (arrowheads, called 'piles'), fletcher (flights or feathers plus the nock into which the bowstring - made by a 'stringfellow' - was placed). Sometimes arrows would be assembled by the same person (arrowsmith) but often they were moved about the country in bundles of incomplete items. Because of their value it wasn't unusual for final assembly to be near the point of storage, for example the Tower of London in the case of the Hundred Years War. They would be stored in sealed wooden barrels where possible with leather separaters to prevent the fletchings being crushed and avoiding damage from moths etc. It's interesting looking at the results from detectorists and archaeologists doing work in the vicinity of known battle areas such as Crecy and Agincourt where large numbers of arrows were known to have been used; so few arrowheads seem to turn up. Often that's just due to 600 years of corrosion, but nevertheless I'd have expected to see more evidence than seems to be spoken of. Or maybe they find loads and don't bother reporting it? I doubt it though. Making an arrow from scratch using authentic materials takes _ages_. Finding a straight piece of ash or knot-free birch (pine is a nightmare), seasoning it, splitting it with a froe, shaping it with a drawknife (and trying to get the weight-forward taper), nocking it with a cow horn slice using rabbit hide glue (which you've boiled yourself over a fire and mixed with some verdigris scraped off that bit of copper you left in the rain around the back of the garage), chasing about the countryside trying to find someone with white geese and willing to sell you pairs of primaries from the right-hand wing, fletching the shaft, binding it with hemp thread, gluing on the pile and then hoping it all holds together when you shoot it. Ugh. Lead and gunpowder is so much easier....
@trentszeponski1394
@trentszeponski1394 7 жыл бұрын
I love the music of the forge and hammer on hot metal vs anvil including the background sound of wood block and drum.
@w0t3rdog
@w0t3rdog 7 жыл бұрын
And this, is why there was such a thing as a fletcher. Imagine the amounts of arrows in a castles storerooms. Or the amounts carried by the english at agincourt... people made a living off of making arrows.
@ThiccboiSalmon
@ThiccboiSalmon 5 жыл бұрын
Bit late but yes, but don't forget no fletcher is complete without his arrowsmith and bowyer buddies :)
@ThiccboiSalmon
@ThiccboiSalmon 4 жыл бұрын
@Abu Troll al cockroachistan I think you maybe right, as battle sites yield very little arrowheads even allowing for corrosion. Metal is metal and iron was a valuable commodity so it stands to reason that at least sometimes of the heads would be reused.
@paulorchard7960
@paulorchard7960 3 жыл бұрын
Novelty item that will draw interest, cool in anyones book!
@gbaughman3348
@gbaughman3348 6 жыл бұрын
have you ever welded the sockets, if so did you have any trouble burning the steel. I think I will try a thin socket maybe use some US 1018 to start with.
@drason69
@drason69 7 жыл бұрын
Nicely done. Do them in equal weights and sell them to historic archers
@WisdomShortvids
@WisdomShortvids Жыл бұрын
Subbed because of this video such craftsmanship thanks
@davestrider9535
@davestrider9535 7 жыл бұрын
guessing that's just mild steel right?
@phoenixforge5944
@phoenixforge5944 7 жыл бұрын
The originals would have just been Wrought Iron for the most part but these are made from EN8
@davestrider9535
@davestrider9535 7 жыл бұрын
alright, so you think some crappy steel like rebar or something would work?
@drason69
@drason69 7 жыл бұрын
Rebar will work. But remember, rebar is different from one batch to the next.
@davestrider9535
@davestrider9535 7 жыл бұрын
oh yea definitely, but if it's for arrowheads that can be reshaped and only occasionally suffer impact then it should be alright. thanks a bunch!
@javanbybee4822
@javanbybee4822 4 жыл бұрын
@@davestrider9535 yes just quench the rebar to try and get some hardness from it. coil spring also works amazing!
@Antipodean33
@Antipodean33 6 жыл бұрын
Now thats an anvil. Excellent workmanship mate
@zacharylovelady9265
@zacharylovelady9265 Жыл бұрын
This is so enjoyable to watch
@Kurogane_666
@Kurogane_666 6 жыл бұрын
What size metal did you start with? im trying to make 1 1/4 inches wide finished, but id liek to have 1 1/2 wide broadheads
@matthewnorwood1384
@matthewnorwood1384 5 жыл бұрын
You make this look easy, I have no experience but I'm certain it is not.
@freundlicherfalmer8375
@freundlicherfalmer8375 7 жыл бұрын
Looks like you´ll need a quite powerful bow to effectively shoot these i guess
@goodgirl99us
@goodgirl99us 7 жыл бұрын
most bows when these were used were 50-75lb draws or 150lb crossbows
@Jvha761
@Jvha761 7 жыл бұрын
Raquel Bauman actually warbows were 100-130lb. That lancel head were used with warbows ^^
@mustafakara7739
@mustafakara7739 7 жыл бұрын
FreundlicherFalmer I forged one of these arrowheads and i shoot them with my handmade pvc pipe 40 pound bow. It works really well
@wk9953
@wk9953 7 жыл бұрын
Raquel Bauman and crossbows were in the 300lb to 1000lb range with 300 lb being considered hunting weight
@sandervanduren2779
@sandervanduren2779 7 жыл бұрын
Raquel Bauman you do realize that longbows found on the wreck of the Mary Rose, that have been sitting underwater for literally 500 years were around 100 pounds when tested. It was estimated that before these bows are submerged, they would pull about 160-180 pounds.
@jeffreycarter1223
@jeffreycarter1223 2 жыл бұрын
I’d like to see it done not as sped up and with a little bit of spoken information about the technique used and measurements of steel used for the collar and tip
@mikec3820
@mikec3820 5 жыл бұрын
i lamp work boro(pyrex) wild how it almost moves like hard glass when seen at this speed. pottery metal glass are all similar in ways
@bikedream6664
@bikedream6664 5 жыл бұрын
What is the diameter of the iron bar please ?
@graveltheblock5578
@graveltheblock5578 4 жыл бұрын
Damn. Isabelle is now making arrows.
@kennethkustren9381
@kennethkustren9381 6 жыл бұрын
My simple question... why not 3 or more lengths in the fire ??? WTF !!??
@mariasoledadsotelo4514
@mariasoledadsotelo4514 4 жыл бұрын
De donde eres
@jens-eriklangstrand1689
@jens-eriklangstrand1689 7 жыл бұрын
This is how - and no jabbing and no fuck-face self endorsement. I can use this in teaching. Tx mister. Btw - the peening should end in a perfect triangle that would close the cone - or forge-welded overlapping - what do you think?
@ateleskier7066
@ateleskier7066 5 жыл бұрын
Fabulous to watch. You make it look really easy. (It isn't.) Thank you.
@gamefactory6227
@gamefactory6227 4 жыл бұрын
i need only eghait?
@scottleft3672
@scottleft3672 7 жыл бұрын
swords into ploughsheers....and arrows into.....chisels.
@masonmp1889
@masonmp1889 3 жыл бұрын
no they would stay arrows just used for hunting
@cookingmarine7911
@cookingmarine7911 7 жыл бұрын
how long does it take to make each Arrowhead?
@phoenixforge5944
@phoenixforge5944 7 жыл бұрын
You could do it in about 3 heats, depends how much you practice say 5 minutes ish for a bodkin
@kkirschkk
@kkirschkk 7 жыл бұрын
so do you know how much in historical times [lets say 1200 ce] each would sell for?
@kennethkustren9381
@kennethkustren9381 6 жыл бұрын
each takes the time it takes, your arm, the fires btu, and when you can actually start working. You... it will never get done. Him... prob less than 2 hrs.
@Ilovepinky-lw4ou
@Ilovepinky-lw4ou 4 жыл бұрын
Can you please make a insane arrow head
@phoenixforge5944
@phoenixforge5944 4 жыл бұрын
What you have in mind?
@galtutankamon
@galtutankamon 7 жыл бұрын
How heavy is your anvil?
@phoenixforge5944
@phoenixforge5944 7 жыл бұрын
not sure probably 250-300kg ish
@fatfat6389
@fatfat6389 7 жыл бұрын
Everybody talking about arrows, but man that anvil, is the biggest I've seen probably, nice.
@nord4338
@nord4338 6 жыл бұрын
What talent; a pleasure to watch. Thank you.
@woodslore8537
@woodslore8537 7 жыл бұрын
The steel you are using, is it just square stock. Say like you would find at a local hardware store?
@leeknivek
@leeknivek 7 жыл бұрын
yes, but if you buy steel, buy it at a steel supplier. 20 feet of 1/2" square is, like, $13 at a steel supplier. four feet of 1/2" square at home depot is probably the same or more.
@robinvanschie9675
@robinvanschie9675 7 жыл бұрын
can you make a viking mace, would be awesome
@woodslore8537
@woodslore8537 7 жыл бұрын
Did the vikings use maces? I know they used swords, spears, seax, and axe. Though I don't recall ever hear mention of the vikings using a mace. Not saying they weren't a thing just never heard of one.
@robinvanschie9675
@robinvanschie9675 7 жыл бұрын
there are founding of maces in there period of time but i of course can't know for sure if they used it. i think you can assume they used it.
@Jvha761
@Jvha761 7 жыл бұрын
Robin Van Schie No vikings didn't use maces/warhammers.
@mariasoledadsotelo4514
@mariasoledadsotelo4514 4 жыл бұрын
Has un video que muedtres tus travajos
@gamefactory6227
@gamefactory6227 4 жыл бұрын
hello ca you do some arrow heads to me?
@rudyduee6849
@rudyduee6849 6 жыл бұрын
Un vrai forgeron, quel talent, bravo ! Je vais essayer mais avec un barbecue, j' ai déjà l' enclume ! Merci pour ces images.
@foisalahmmed6345
@foisalahmmed6345 6 жыл бұрын
awesome thanks for sharing....
@JackRobin86
@JackRobin86 7 жыл бұрын
You really need to dress the face of your crosspeen hammer into a very slight dome. Apart from the dressed edges, it looks completely flat.
@phoenixforge5944
@phoenixforge5944 7 жыл бұрын
KyleG. Got lots of different crosspeins to choose from thats my favourite for this job. Lets you get right in the corner
@ateleskier7066
@ateleskier7066 5 жыл бұрын
@@phoenixforge5944 Someone telling a craftsman, whose film we just watched, how to do it better always makes me smile.
@kennyclement2823
@kennyclement2823 5 жыл бұрын
How long dose it take you! To make 1?
@phoenixforge5944
@phoenixforge5944 4 жыл бұрын
about three heats
@johnclaudio8799
@johnclaudio8799 6 жыл бұрын
I think I'll do one, but with a different way
@ryandejong7374
@ryandejong7374 6 жыл бұрын
I think I’ll just go to the store and buy them
@Fae2705
@Fae2705 6 жыл бұрын
I like the long tip!!!!
@javanbybee4822
@javanbybee4822 4 жыл бұрын
its meant to go through soft armour.
@mateuseliastemporim4358
@mateuseliastemporim4358 5 жыл бұрын
Parabens uma arte milenar que ainda existe.
@etanateixeira3045
@etanateixeira3045 6 жыл бұрын
👍👍👍
@link12365
@link12365 7 жыл бұрын
Really cool!
@idegila3153
@idegila3153 5 жыл бұрын
Nice
@stefanodogg280
@stefanodogg280 7 жыл бұрын
Wonderful. I'm going to have a full woodshop and forge soon and basically I'm an info sponge right now
@thangninja
@thangninja 4 жыл бұрын
Đẹp
@gonzalomauriciolara9931
@gonzalomauriciolara9931 6 жыл бұрын
Very good your video
@lopyuoz9709
@lopyuoz9709 5 жыл бұрын
Di jual kh
@konstantinzhdanov5461
@konstantinzhdanov5461 6 жыл бұрын
great! 👍
@alexrocharamos2908
@alexrocharamos2908 6 жыл бұрын
Parabéns muito bom trabalho
@Gurudwara-ataksar_sahib-bhupal
@Gurudwara-ataksar_sahib-bhupal 6 жыл бұрын
Good job
@garychynne1377
@garychynne1377 7 жыл бұрын
THANK U GARE
@taxidrivercarl6074
@taxidrivercarl6074 5 жыл бұрын
That noise through the video felt like a smoke alarm going off 😖 Great video but I had to mute it
@iainsherwood5918
@iainsherwood5918 6 жыл бұрын
Arrowheads would have mostly been made by apprentices
@ВладимирСтоляров-о7е
@ВладимирСтоляров-о7е 6 жыл бұрын
Молодец, очень понравилось.
@einarvolsung2202
@einarvolsung2202 7 жыл бұрын
very nice
@casacasa1026
@casacasa1026 6 жыл бұрын
ؤ
@AlvaroDantas-lf4xx
@AlvaroDantas-lf4xx 6 жыл бұрын
Manda mais dese vídeo eu gostei
@shamshuddinansari9533
@shamshuddinansari9533 5 жыл бұрын
Sham
@T90m333
@T90m333 6 жыл бұрын
*МОЛОДЕЦ*
@maremhuseen1181
@maremhuseen1181 4 жыл бұрын
واو على
@TheRandomOutdoorsmen
@TheRandomOutdoorsmen 6 жыл бұрын
Thank you, so helpful
@Gameplay-xj6pv
@Gameplay-xj6pv 6 жыл бұрын
He meant born to swallow
@thomasrobson6370
@thomasrobson6370 5 жыл бұрын
Wow, your fast :-)
@fajarmubaroq2677
@fajarmubaroq2677 4 жыл бұрын
The apik
@s.hoppla8012
@s.hoppla8012 7 жыл бұрын
Hey Bornto, you must be much quicker, man! You're to slow
@phoenixforge5944
@phoenixforge5944 7 жыл бұрын
S. Hoppla il try harder next time
@gonzalomauriciolara9931
@gonzalomauriciolara9931 6 жыл бұрын
Thank you master
@正妹好妞依鈴
@正妹好妞依鈴 5 жыл бұрын
😅😅😅😅這樣打好像是電話響起來了 好好聽啊~
@bunyamilcapar7767
@bunyamilcapar7767 5 жыл бұрын
Müke
@joshbarbone189
@joshbarbone189 4 жыл бұрын
Bôrntô forgé
@enesbatur5445
@enesbatur5445 4 жыл бұрын
Siz delisiz
@propmakermaker
@propmakermaker 4 жыл бұрын
WTF!!!???
@slawbhuhuh8686
@slawbhuhuh8686 7 жыл бұрын
Setting speed 0,5
@uzbektiger3860
@uzbektiger3860 5 жыл бұрын
mening kanalim @UZBEK TIGER
@ГазовыйЭнэджер-з5о
@ГазовыйЭнэджер-з5о 5 жыл бұрын
Nice
Making A Bowie Knife From An Old Spring
22:34
Edward Knives
Рет қаралды 927 М.
How To Forge Bodkins - Making Medieval Arrowheads
23:38
Medieval Arrows
Рет қаралды 18 М.
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
Forging Medieval Arrowheads
8:12
Mick Grewcock
Рет қаралды 45 М.
Making Valerian Steel from wootz steel scrap | Making a gladiator's sword
21:18
One-piece forging helmet. How to make armour
32:57
How to make armor. ArmorySmith
Рет қаралды 9 МЛН
How to Forge a Nail Header -Blacksmith Essential Skills-
12:50
Phoenix Forge
Рет қаралды 11 М.
Forging Viking style Arrowheads (forgewelded)
9:45
Anders Soberra
Рет қаралды 18 М.
FORGING AN ARROW HEAD, full process.
21:44
Tod's Workshop
Рет қаралды 86 М.
Making a historical crossbow - with the HIGHEST arrow speed?
25:50
Andi's workshop
Рет қаралды 6 МЛН
Ottoman Horn Bow
57:11
Stiliyan Stefanov
Рет қаралды 1,7 МЛН
I Made the Cane Sword From The King's Man
17:11
Black Beard Projects
Рет қаралды 6 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН