Piaggio Zip 70cc Malossi Sport Yasuni R first kick cold start and walkaround

70cc Zip fined tuned making easy to start from cold.
Setup:
70cc Malossi Sport Cast Iron Kit
Yasuni R Exhaust
21mm TNT Racing Carburettor (80 main jet)
Stage 6 Clutch
Polini High Speed Variator
Make sure to stay tuned to see more content based around Zip's on my channel in future.
Please do leave a like👍and subscribe & stay tuned, also comment down below on what videos you will like to see next!
Thank you for watching!

[@MrBerenguer67]

Hi thks four video excellent I have a Piaggio Zip 2T I have a sport exhaust or ready I like to fix a 70cc malossi kit my carburettor is standard Dellorto 17.5 can you please let me know whitch jet size I use on many thks mate

[@Stuxzberg]

Do you use the original crankshaft?

[@82Bjarni]

Thats a yasuni Z

[@domciau]

Hey man, one quick question, what fuel mileage do you get?

[@alanmusli1118]

hey bro i have an aprilia sr50 with a malossi sport 70cc kit and a polini hi speed vario. what do u think should i get a yasuni R or a yasuni Z. also i have the stock dellorto 17.5mm carb

[@rshproductions2178]

Hi there, Ok according to your setup I would recommend you get a Yasuni R exhaust.

[@alanmusli1118]

@@rshproductions2178 thanks bro

[@LS-BKLF]

aye bro how fast do you think my zip 50 2 stroke will go if i put a malossi 70cc on it, remove the vario and swap the normal rolls for 7.5 g rolls

[@rshproductions2178]

You will get roughly 50-60mph out the standard 70cc Malossi Sport kit with an overall setup that is tuned to a good standard. If you are going to install the 70cc Malossi kit on your Zip I would recommend you use 5.5 g rollers as 7.5 g are the stock roller weight which will be too heavy for a 70cc setup especially if you using the stock variator.

[@rshproductions2178]

Watch my other videos on my channel👍 would appreciate it if you could subscribe aswell.

[@LS-BKLF]

@@rshproductions2178 thanks bro, was curious since im pretty new to the community, and wanted to know some things, u helped me out, so i subscribed!

[@rshproductions2178]

No problem thank you very much, also let me know if you need anymore info I'm here to help👍

[@lannnn7216]

@@rshproductions2178 I was able to do 50mph on a 50 4 stroke with malossi vario but I had 9g rollers in it,with a 70cc sport , he should do at least 65mph

[@jarnodorresteijn4734]

Hey man! I have a yasuni r and a malossi sport with a malossi vario and 17,5 main carb from dellortho i have main jet 90 but it keeps shuttinf down if i give gas again what size jet should i use?

[@markoskoda]

85 with W7 igle and airbox modify

[@vagest4177]

Whats the top speed?

[@mietovanilia7936]

Too big jet or too much air

[@brandonterry1456]

Hey man I'm doing a naraku 70cc kit on my zip50 do you have any reccomendations for jet size to start off?

[@rshproductions2178]

Hi there, Sounds good 👍 first of all what carb size and exhaust are you planning on using?

[@brandonterry1456]

@@rshproductions2178 currently I'm using the stock 17.5mm dellardo carb that come with them I've got a 72 main jet in ATM but I haven't started her yet as I only finished yesterday

[@rshproductions2178]

Ok 72 is a bit too low especially for the first initial start up with your new kit I would recommend a jet range from 82-88.

[@rshproductions2178]

Also watch my video on my channel where I explain and detail the full performance setup on my zip: kzbin.info/www/bejne/bXuxk2mfa6lgd5I please do subscribe and stay tuned for more zip content 👍

[@brandonterry1456]

@@rshproductions2178 okay thank you, good to know, will I need to change the idle jet as well? I'm assuming so,I'll put an 84 in to start it,what sort of changes should be made to the 2T injection system? Because I'm assuming that has to be changed as well to suit the mixture requirements

[@zwarevannelle1]

Is a yasuni z ! Not a r

[@cica1312]

POV: ur tryna be smart but know shit about scooters

[@zwarevannelle1]

@@cica1312 ?

[@Stuxzberg]

@@cica1312 it is a yasuni z

[@gilbert.743]

@@cica1312 it's a Z though lol

[@SHAUNOTPPRODUCER]

it is a z pipe the R has a spring to the end can

[@knucknoris3941]

piaggio zip yasuni R kzbin.info/www/bejne/sHnaqZ6PhcZ_d80&ab_channel=Knucknoris