Great videos Tim, all your PID videos have been really helpful. Having that visual of the trainer helps me understand the concepts better than any other KZbin videos I've seen.
@TimWilborne4 жыл бұрын
Glad to hear. This has been a challenging series and we are only about 1/3 of the way through it.
@luislema8094 жыл бұрын
good afternoon from Ecuador excellent video tutorial
@TimWilborne4 жыл бұрын
Thank you very much!
@jesseduran56742 жыл бұрын
Watching from central California, this really helps
@TimWilborne2 жыл бұрын
Glad to hear it Jesse!
@PrayogshalaByProfessor4 жыл бұрын
Awesome Tim Sir
@TimWilborne4 жыл бұрын
Thank you.
@jimbass9243 жыл бұрын
Great video!
@TimWilborne3 жыл бұрын
Glad you enjoyed it
@shawnspencer87662 жыл бұрын
What kind of analog sensor is being used here? Ultrasonic?
@traviscoleman95202 жыл бұрын
Can you just have an analog input with a PID instruction to control a bit instead of another analog(output)?
@TimWilborne2 жыл бұрын
Yes, lots of them pulse OFF and ON to control a PID.
@johnrece66223 жыл бұрын
So voltage with 24vlt power supply, switch 1 needs to be in the off position? Channel config shows 0 to 10vlts dc though.
@TimWilborne3 жыл бұрын
I'm not following your question John.
@johnrece66223 жыл бұрын
@@TimWilborne my pid trainer hasn't came in yet so I was just using a 24 vlt potentiometer with a resistor I was just wondering if the set up would be different. So my potentiometer was going to be my ball level?
@TimWilborne3 жыл бұрын
@@johnrece6622 Oh I was thinking you were wiring the physical Switch 1 on the trainer to the analog. Yes, the DIP switch in the top of the 1762-IF2OF2 is a load resistor used for 4-20mA signals. To use in on 0-10VDC inputs, you must switch the DIP switch to the off position and configure the analog input for 0-10VDC in the I/O configuration. Here is a lesson to help understand what the load resistor does. twcontrols.com/lessons/analog-circuits-training-how-a-plc-input-reads-a-4-20-ma-signal
@MaNemUmar3 жыл бұрын
Hey Tim, just a general question. Does Rockwell Automation still sell Micrologix 1100 units or do you have to look for them through third-party suppliers? Im planning on using an 1100 for a school project (RsLogix Micro started lite (the free version) can only be used to program 1100 and 1000s). I'm sure the 1000 is discontinued? What about the 1100 (they still have it on their website, haven't actually got around to getting a quote for a unit) :)
@TimWilborne3 жыл бұрын
The Micrologix 1100 is still available from @ROKAutomation but on new projects I would recommend looking at their Micro820 PLC. They have more capabilities and should save you a few dollars also.
@MaNemUmar3 жыл бұрын
Tim Wilborne does rockwell offer a limited free version of connected components workbench ? My only inclination towards Micrologix was rslogix micro starter lite.
@TimWilborne3 жыл бұрын
Yes, see lesson below on how to download it. CCW also includes a built in simulator too. twcontrols.com/lessons/where-can-i-download-allen-bradleys-connected-components-workbench-for-the-micro800
@MaNemUmar3 жыл бұрын
Tim Wilborne Awesome! Thanks Tim, appreciate it.
@MaNemUmar3 жыл бұрын
Tim Wilborne Does the Micro 820 model have a version with FET outputs? I’ve been looking into something identical to the Micrologix 1100 1763-L16BBB. I’m looking to control two solenoid valves ( turn them on/off about 20-25 times; one an on/off valve, the other a 5/2 double solenoid valve) so relay outputs aren’t really feasible for the long term. Any advice would be appreciated.
@PrayogshalaByProfessor4 жыл бұрын
Good Morning Tim Sir, Me looking for a school bell program of condition A. Monday to Saturday bell ring at 9:00 am , 1:00 pm , 3:00pm for 10 sec, and on Sunday it should not ring Please help me
@TimWilborne4 жыл бұрын
We don't do homework assignments here. We only help you along. What have you figured out so far?
@stanleypolanco48873 жыл бұрын
Greetings, very good friend, your video, you already know what is the capacity in (amps) of the 24vDC source that the BWA model incorporates.
@TimWilborne3 жыл бұрын
No and I don't recommend using it. Especially in older models, you could short the 24VDC out and wipe out the program. Get an external power supply.