Abu 5500/6500 How to replace the Gears Step by Step Instructions

[@morsl47]

You sir are a scholar and a gentleman. Because of this high quality and professional video I was able to reassemble my reel correctly. The detail showing my error wasn't in any of the other videos I could find on the subject. Sincerely, thank you!

[@SashaS2art]

Ordered the gears from you and now they're fitted. You make it look easy (I may have sworn once or twice) thanks Jamie. Rough ground chrome rocket stage one completed.

[@PimpMyReel]

Great work 👍🏻

[@jonathanleythorne4775]

im Jon this is my reel, i didnt think it could be improved but Jamie has proved it can. It has been tried and tested and works as it should. This is a serious bit of kit which wont ever wear out unlike me once again thanks Jamie.

[@anitaolmo4392]

Jonathan Leythorne Abu 5500

[@alfakilla1]

Thanks do much for this detailed video....I am able to go from slow to fast now on my 1600 and 3600 black max's

[@davidogden8370]

you made that look so easy .. thanks for the video

[@davidleasure9138]

thanks for the educational video. You are the master reel man

[@adrianshrubb1317]

Re 6500 beast mutiplier, ive took the level wind off and removed the white cog as in your video, the only thing left in the sude olate is the rachet gear, when im casting out it sounds just like you left the rachet on, was just wondering if there was something in the main gear case that needs removing or that could be causing the noise.

[@lesrinehart933]

Great video

[@davidcrabtree4919]

I just so need a set of those gears Jamie, your good lady will have a fit if you have scratched that table lol. Take care

[@PimpMyReel]

+David Crabtree Thanks David, my good lady saw your comment and has just gone to check the table....... More gears due next week

[@19reeves79]

Where do you get your parts from I purchased a 5000 and trying to find spool tensioner

[@AnubhavAnkitGeorge]

Very nice and helpful video sir, I want to ask some questions about my baitcasting reel. I have black max low profile baitcasting reel and I go for snakehead fishing 3 to 5 days a week. And after few month (2-4 month) my baitcasting reel is not so smooth as it was new so I do clean and grease my reel but after oiling and greasing my reel don't get that smooth retive as it was in new. Can u build me sir what to change and what Is the problem. Same I feel with my Royel Langend casting reel. Plz respond me I'm waiting for your respond from India

[@peteeckes3530]

Great video Jamie, I experience slipping when reeling in (feels like drive gears slipping). Upon inspection, the gears seem to look good (no broken/worn teeth). I replaced the pinion yoke thinking it was a sloppy fit with the pinion gear causing the gears to slip. No change with the new yoke, still slips. What other components do you suggest I replace to resolve this gear slipping issue. Thanks

[@PimpMyReel]

Gears slipping is caused by worn drag washers. Replace yours and all should be good. I suggest you get the uprated Carbon Tex version or give me an email at [e-mail] I can also provide you with outstanding performance drag washes that will give you 17lb of drag

[@Mahigeer1]

@@PimpMyReel If you are using braid, make sure you put on the empty spool some elastic finger tape before putting on any line. It could be the mechanical parts are ok, but the whole line is spinning on the spool.

[@danieljimenes2940]

tengo un 5601c4 lo abri para darle mantenimiento y aun lo siento trabado ala hora de recoger el cedal es normal de ese tipo de carrete? esta con poco de uso

[@davidleasure9138]

we sometimes refer to the little horseshoe clamps as Jesus clips as they warp across the room. Jesus where did that go.

[@wefollowrivers1632]

Awesome video, thinking about upgrading our Abu's with these gears in the future, would these fit left hand retrieve models?

[@PimpMyReel]

These are helical one way gears, only made for right hand reels at the moment.

[@wefollowrivers1632]

@@PimpMyReel Thought so, oh well thanks for reply have a good one cheers.

[@richieg8432]

Did you swap gears that have a diff ratio?

[@maryshan80]

I noticed on my 6500 c3 atleast on one of them the brass pinion gear on the the bottom only has two knotches and yours and my two other have four knotches in the bottom of gear (die cut-outs0 when looking at bottom of the gear do you know if there is any difference, i did notice it spins better than the two with 4 knothes in brass bottom gear shape.//

[@PimpMyReel]

Please have a look at; Abu 5500/6500 & Akios 555/656 Centrifugal brakes explained by PMR kzbin.info/www/bejne/h5fThJydd6qlhLs This video will explain everything regarding 2 and 4 slot Abu pinion gears

[@maryshan80]

Will do Thanks again for your time and response.

[@phillkirby]

I've got a standard 6500 c3 can I get a 7.3.1 ratio gear or higher upgrade thanks

[@PimpMyReel]

The ManFish stainless steel gears are 6.3:1. There will be a 6.8:1 version out towards the end of this year, that is the highest gearing possible for this type of reel.

[@jesusvalenzuela9623]

Can I upgrade gears on a 6500 s?

[@striperhunter-ic2wt]

Can I ask what size and type of line you use on those reels?

[@PimpMyReel]

15 to 20 lb mono

[@SuperEmiliotorres]

you have one video how removed anti -reverse?

[@PimpMyReel]

You would need to make up a removal tool

[@thehilariousdarius8446]

Is it possible to upgrade my 5000D to have instant anti reverse? Thanks in advance.

[@PimpMyReel]

The Hilarious Darius No the hole is a slightly different size think it's about 0.5 mm too small to put a one-way infinite anti reverse bearing in.

[@thehilariousdarius8446]

well Dang, But thanks for the info, I love your vids!

[@mojondro]

so i can put 6.3 to 1 on a 5.3 reel?

[@PimpMyReel]

Yes

[@mahtoosacks]

Do the washers need to be greased between each other?

[@mahtoosacks]

Nevermind. www.mikesreelrepair.com/blog/drag-washers-to-grease-or-not-to-grease/

[@PimpMyReel]

Depends if you want a wet or dry drag, wet drag is smoother, dry drag has more lbs. Abu 6500 with a wet drag (9lbs of drag), Abu with a dry drag (12lbs of drag). Dry drag tends to let line out in a staccato fashion, ie short sharp jerky movements.

[@mahtoosacks]

Thank you. That makes the most sense from what I've read.

[@mad4669]

Are these Stainless Steel?

[@PimpMyReel]

mad4669 The gears I put in this reel are full stainless steel 6.3:1 ultra high speed retrieve. They are made by ManFish, I am their sole distributor world wide.

[@lesrinehart933]

So not necessary to remove the handle

[@takunna7074]

WTF reel is that? it aint no 5500 or 6500, because i have both the 6500 and the 5500 and neither of them have that ugly knob on the left side. and where do you get those stainless steel parts?

[@takunna7074]

although the internals are the same.

[@takunna7074]

and why is yours orange? mine are red and silver.

[@brodiephillips6467]

Takunna It's a PMR custom Abu Garcia 6500 with a big centre mag fitted. The knob on the left sideplate is the control knob.