PinPoint ORP Meter Set Up... Plus TIPS & TRICKS

  Рет қаралды 1,585

Your Kangen Water Guy

Your Kangen Water Guy

Күн бұрын

Пікірлер: 20
@kristinaseeley45
@kristinaseeley45 7 ай бұрын
You videos are so helpful and Im amazed by how much you do to educate us all. Thank you!!!!!!
@YourKangenWaterGuy
@YourKangenWaterGuy 7 ай бұрын
Thank you. 🤠💦
@MiaKamerman
@MiaKamerman 11 ай бұрын
Hi Martin, great tips and info. Always appreciate your videos, learning lots! Can you send me the link for the Pin Point meter please? Cheers!
@YourKangenWaterGuy
@YourKangenWaterGuy 11 ай бұрын
Thank you and you’re welcome. Just search ‘PinPoint ORP Meter’ and you’ll be able to get it online. American Marine Supplies makes them. Stan at www.6atools.com also sells them.
@djlauralush
@djlauralush 5 ай бұрын
Helpful! thanks, just looking at buying an ORP here in NZ, love the 5% discount code and link to look into. Thanks!
@travelagentmichelle
@travelagentmichelle Жыл бұрын
Hi Martin. Thank you for the info! Can you please send me a link for the discount on the ORP meter? 🙂
@YourKangenWaterGuy
@YourKangenWaterGuy 11 ай бұрын
Thank you and you’re welcome. Just search ‘PinPoint ORP Meter’ and you’ll be able to get it online. American Marine Supplies makes them. Stan at www.6atools.com also sells them.
@ZeusdJones
@ZeusdJones Жыл бұрын
I recently purchased a Milwaukee 500 Pro orp meter and I don’t get a high negative reading it stays -250. I’ve seen others reach -900
@YourKangenWaterGuy
@YourKangenWaterGuy Жыл бұрын
There are other factors at play here. Type of source water, flow rate, mineral level. As a product owner, you can learn more and be further supported in the Enagic® Owners & Distributor Support Group I created: facebook.com/groups/enagickangenwaterdistributors
@tattumwest2913
@tattumwest2913 5 ай бұрын
Can I please get the link for the 5% discount. Also I’m borrowing one at the moment. My daughter tipped over the pot of liquid the prob goes into. What else can I use? I do have a sachet of the liquid stuff in box but you said this doesn’t work well.
@welnawelness4807
@welnawelness4807 2 жыл бұрын
Thx for the video. My meter is always not accurate. I will try this. Where do I get the storage solution
@YourKangenWaterGuy
@YourKangenWaterGuy 2 жыл бұрын
I get my items from Stan at www.6atools.com
@YourKangenWaterGuy
@YourKangenWaterGuy 2 жыл бұрын
Did you find this helped?
@ElDell
@ElDell 2 жыл бұрын
The amount of meaningless or mis-information in this video is stunning... The PINPOINT +400 calibration both confirms a uniform measurement scale as well as a properly working, unbroken probe Then follow the calibration fluid procedure with using the dull side of the polishing strip only on the silver metallic dot at the tip of the probe You are now ready to measure negative ORP water.
@YourKangenWaterGuy
@YourKangenWaterGuy 2 жыл бұрын
Very interesting comment, especially considering I spoke to the manufacturer ‘American Marine Supply’ and they said all is good.
@ElDell
@ElDell 2 жыл бұрын
@@YourKangenWaterGuy I don't think so. My name is Lou Dell and I own American Marine Inc which is the company that makes the PINPOINT ORP Meter. Your comment?
@YourKangenWaterGuy
@YourKangenWaterGuy 2 жыл бұрын
@@ElDell, well I emailed your company and they were baffled as to why the calibration fluid wasn’t working with two probes, one being new. I’ve always had to calibrate with redox storage solution. What I know is, it works when I do it the way I’ve found to do it… Following the steps in the instructions, it doesn’t work, hence why I emailed your company.
@ElDell
@ElDell 2 жыл бұрын
@@YourKangenWaterGuy Certainly you can always send the probe and meter back to American Marine for evaluation and we can discover for sure if the problem is the meter, the probe or the user. Your probe may an issue and could be internally broken. Including the internal glass on the new probe. Calibrating the meter with storage fluid is ludicrous since calibration fluid does not have a reliable single value. Hey, why not use Coca-Cola or tap water to calibrate it? Although your method works well for you I would not recommend it and perhaps you should seek the reasons why standard calibration with +400 Fluid and polishing the silver tip does not work well for you while it works for everyone else. Try setting your wristwatch by looking at the sun. Even a broken clock is correct twice a day but would never recommend it.
@YourKangenWaterGuy
@YourKangenWaterGuy 2 жыл бұрын
@@ElDell thanks Lou, although there is no need to be a ‘smart arse’ about it… Especially considering I’ve tested with two different probes, although had the same experience with other people here in Australia, and have referred many people to purchase your products.
Nvidia CEO Huang New Chips, AI, Musk, Meeting Trump
15:28
Bloomberg Technology
Рет қаралды 220 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
Decentralized Medicine | Jack Kruse | Assembly 2023
43:06
Urbit
Рет қаралды 2 МЛН
How to Calibrate your ORP Probe EP 10: Apex Aquarium Controllers from Neptune Systems
3:02
BRStv - Saltwater Aquariums & Reef Tanks
Рет қаралды 59 М.
How to Store pH Meters to Make them Last Longer - Preserve Probes
4:56
Everything Grows - Indoor Tent & Home Gardening
Рет қаралды 12 М.
Trump's Plan for "Greater America" Explained
8:42
TLDR News Global
Рет қаралды 760 М.
How to test Chlorine content in water
3:37
Acuro Organics Limited
Рет қаралды 101 М.
Official PINPOINT® ORP Monitor Set-Up/Calibration
4:11
American Marine USA
Рет қаралды 11 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН