PIPE BEVELING MACHINES (LET’S TALK ALL ABOUT EM) USING THEM ON PIPE FENCE

The questions that sparked this video were around using a pipe beveling machine for pipe fence. However, I thought this would be a good chance to talk about the beveling machine in general, so you the ins and outs as well as a demonstration so you can see it in action. Watch this video for how to use a beveler, info on barrel torchs, band and crawlers, and the pipe beveler.
For Oklahoma Homegrown BEEF - email ([e-mail])
How To Bevel WITHOUT a Beveling Machine - • HOW TO BEVEL PIPE WITH...
Welding Tools Videos - • SUMNER PIPE JACK STAND...
STAY IN THE LOOP:
EMAILS - www.arossweldi...
TEXT - [phone]
SHOP AT AROSSWELDING - www.arossweldi...
Free Resources - www.arossweldi...
••••••••••••••••••••••••••••••••••••••••­­­­­­­­­••••••••••••••••••••••••••••••••­•­•­•­•­•­•­•­•­•••••••••••
JOIN THE INNER CIRCLE: arosswelding.m...
Details about the Inner Circle: arosswelding.m...
••••••••••••••••••••••••••••••••••••••••­­­­­­­­­••••••••••••••••••••••••••••••••­•­•­•­•­•­•­•­•­•••••••••••
AROSSWELDING.COM - www.arossweldi...
SOAPSTONE - www.arossweldi...
WELDING SHIRT - www.arossweldi...
NEW CHANNEL WITH QUICK TIPS AND TRICKS
AROSSWELDING SHORTS - www.youtube.co...
••••••••••••••••••••••••••••••••••••••••­­­­­­­­­••••••••••••••••••••••••••••••••­•­•­•­•­•­•­•­•­•••••••••••
Social Media links - come hang out after hours.
My Instagram: / arosswelding
My Facebook: / arosswelding
Our company links: Industrial Tradition
www.industrialtradition.com
Facebook: / industrialtr. .
Instagram: / industrial_. .
KZbin: / industrialtradition
Our vlog channel: / austinandkayla

[@peaceofmind2842]

I learn more from you than then welding school im in.

[@WilliamBlake01]

First like 🔥 great video buddy. Just finished the 3rd week at the local votech. Learn a lot from your videos

[@WilliamBlake01]

Also I appreciate the great customer service about my welding shirt thank y’all a lot!

[@aldencharley4875]

Awesome information! I been wanting a beveling machine for quite sometime now. It's very elusive peice of welding equipment.

[@codywallace6948]

I learned how to use one of those a few years back when I was practicing some tig on pipe they make it a lot easier than using you a grinder

[@priusrepellent]

127k, dang man been killing it lately!!! Good job!

[@arosswelding]

Thank you for your support!!

[@priusrepellent]

@@arosswelding I e been here a long time, I truly enjoy the things your share, the ideas you have and the challenges you succeed and fail thru as well. It’s fun to watch a good clean channel with my children as well. Be blessed, and congrats again!

[@davidrios8872]

good info. one thing you forgot to mention and im sure many know, once youre ready to cut move back and forward and slowly open the oxygen as you move forward so it wont bust threw and pop slag up. i was told about that. and another good thing luckily nothing caught on fire once cutting upside down lol safety first. wheres karen lol thanks for the great info. im 100 percent to leveled that pipe on the jack stands

[@scootertrash647]

Love the jack stand with the chain. In all my years I've never seen that

[@workonitm8]

Thanks Austin, it's always great to learn about what is available out there. As a side note, some insulation inside your roof will make a big heat/cold difference. Working in an oven isn't fun ! 😒

[@olddawgdreaming5715]

Thanks for sharing with us Austin, I just learned something new, thanks! Stay safe up there and keep up the good work and videos. Fred. 🙏🏻🙏🏻👍👍👏🏻👏🏻👋👋🙏🏻🙏🏻

[@arosswelding]

You bet. Thank you for showing up every week and watching and chiming in every week. It is much appreciated.

[@travelernextstopheaven3286]

Nice cut with the bevel tool. Never even heard or seen one. Thanks for sharing.

[@arosswelding]

You bet. Thank you for watching

[@Thecowboy1950]

We had barrels torch’s on our electric eye cutting table when I worked in a fab shop close to 25 years ago

[@jonnyonthespotwelding979]

Hey "A" man, those are the best to square up the end of pipe, but preparing the metal is paramount. Love the information. Hood down lights on.

[@dsmreloader7552]

Learn sumpin new every Friday!

[@jimgam730]

Did you know that Ridgid tools makes a mechanical beveling machine? Works great on pipe as well as plate. I've never personally used one but have seen it used. It's fast to set up, easy to use and gives a real smooth finish so you don't have to do any finish grinding.

[@tmonnmiles]

They are nice to use, but they are way more expensive than the torch bevel machines.

[@ericfld1209]

Austin your videos are awesome 👌 💯 I have learned so much keep them coming 😁

[@sheldonhibler4033]

Good to meet u today

[@mugshotbradley5505]

Good video and good information. Those are some pretty handy tools.keep up the good work. Work hard and be safe.

[@michaelshortridge6379]

Bought short and long barrel torch on Ebay. Probably 15 -20 years ago for 80 or 100 bucks. Both were in perfect condition.

[@forestcityexoticsco.307]

Your channel is awesome! The video quality and editing is great along with the fantastic and entertaining welding information. I'm surprised your channel doesn't have more subscribers. Keep up the great work! You should do a collab with weld tube!

[@jvazquez53]

Interesting video! Oh there's the cool bobcat!

[@DimeLayer8010]

Can you make a video on adjusting loose chains, removing them, retiming etc. ?

[@russelljackson7034]

Right on

[@louisstephenson5710]

The factory bevel is 37.5 degrees on pipe.

[@dillon2107]

I'm sure you have noticed that sometimes when you first start cutting slag will be left on the inside of the pipe and when you finish the cut it will cause a blowout on the inside of the pipe. to prevent this, when you start your cut move the torch the opposite direction for a short bit ,then quickly reverse and run back thru, clearing the under side of any slag.

[@user-hz3oe3jo6w]

That's a unique insight!

[@adred42]

Hey Austin I was watching when you built your shop and was wonder what model the other machine was that you guys were using

[@jasonstottlemyer6939]

Hey Austin! What quick connects do you have on your torches?

[@fztfabs65]

I have the same beveler as you, so when you set it at 60 on the bridge. Is that an included angle? So 30° for each pipe? Or is your cut coming out at 60° bevel?

[@peetky8645]

nice video. thanks

[@arosswelding]

You bet! Thanks for watching!

[@eddiealcorn3229]

Hey Austin I got a real big following on tic toc and we had danny kinderling from wester welding on live the other night and would love to get you on a live also.

[@wadewittman8510]

Great video Austin 👍. Drink plenty of water out in that heat, c'mon 👌.

[@arosswelding]

Hello… C’mon 👌😂😎

[@cameronyoung3307]

I’m just about to go to welding school 3 years out of high school and I don’t know what kind of welding I want to do pipelines, plants, etc but I definitely would love to have my own rig. Out of all the welding you’ve done what kind did you enjoy most? Btw I’m in Southeast Tx.

[@davidleblanc9676]

I gotta say it iam saprized you ain't drinking coffee lol

[@mralexismtz773]

Do you plan on pipelining again?

[@graham1188]

Off topic question. Do you by chance know why, when welders build tub rigs, some put the welder directly behind the back window sitting sideways in the truck bed, and some put it in the center facing out the back. Is it for easy access to the controls on the welder, or weight distribution over the axles, or some other reason I'm unaware of?

[@arosswelding]

From what I know it is just personal preference. Or personal situation. Some people want the back of their bed more clear for space to hall things. And some like it in there long ways that way it is easier to work on.

[@graham1188]

@@arosswelding good to know, thanks for the quick reply

[@aaronhoward7562]

Coffee

[@priusrepellent]

Is there a coping beveling machine?

[@arosswelding]

I am not sure… I am pretty sure I have seen a magnet situation that helps you lay out a certain saddle on a certain size of pipe but I do not know about a beveling machine that does such.

[@Adam4phillips]

Or just get a pipe fitter and a grinder

[@mtcwby1]

Good video, Do you rent/lease your gas bottles or own them

[@arosswelding]

I actually do both. I lease a set and own a set

[@Nono_713]

I see u not pipelining right now

[@arosswelding]

No sir. I have just been home doing my own thing.

[@Nono_713]

Oh ok I see