Pistelle X68 replacement o-ring kit is here!

[@richiskenderian5198]

Thank You. I have shot probably 150 rounds thru my Intrubuster with 0 issues. I always put a little oil on the tip of each co2 before i fire it. Didn't realize how important letting it warm up for 10-15 minutes before firing again was. Thanks for pointing that out ! I also ordered the same O-ring kit from MCS and should have it anyday. I love mine too ! Thanks Again..

[@SpACeCruizeR2o3]

I heard the gen2 is gonna come with a warming system using a marble from the center of the pyramid of Giza then u can shoot it back 2 back 2 back 😊

[@airgunnerreviews7888]

Definitely good to have spare orings around! Awesome pistol!!!

[@malefanematsie3890]

But during selfdefence will the opponent wait for me for 15 min before we battle it out again 🤔

[@Gen-X702]

I don’t know how this company has the fucking audacity to charge us $20 for three or four O-rings when they sold us a $500 leaky ass gun. They should be sending a box of O-rings to take care of this thing instead of charging us more money.

[@EdmondKing-r4k]

I just like to say you're doing a great job. Keep up the good work.

[@airgunnerreviews7888]

Thanks! I appreciate it!

[@lesslethalfordummies]

Good to see the kits are now available. The 4 smallest orings are part of the regulator piston. I only have about 50 shots through mine so far but all without issue.

[@SpACeCruizeR2o3]

50 already god I'm still waiting on my 33 greese medium right 😅

[@airgunnerreviews7888]

Good to know thanks hopefully won’t need them anytime soon!

[@smokingunclefrank6037]

You were one of the lucky ones I only fired mind 3 different times in three days so there was about 24hrs between usage and on the 3rd time it leaked tried grease even other O-rings of the same diameter and nothing paper weight so I returned it refund and got something better I'll hold off on getting one until it's been out longer I think maybe If they make a gen 2

[@malefanematsie3890]

☝️ me too!! Gen 2, will be awaited and the fact that I have to warm it up for about 15 min before firing again leaves much to be desired 🤦‍♂️

[@THELESSLETHALSPOT]

@@smokingunclefrank6037 I have been thru more than 50 capsules with my Intrubuster and luckily no leaks or issues yet.

[@THELESSLETHALSPOT]

@@malefanematsie3890 15 minutes before firing again for what?! I have no issues whatsoever.

[@malefanematsie3890]

@@THELESSLETHALSPOT My point exactly, I have seen some channels firing immediately after replacing co2. Glad you don't have issues with yours. Have you seen East coast west latest vid firing it with extended barrel. That thing is a beast👍

[@airgunnerreviews7888]

Sorry you had problems right off the bat with it! There are a lot of different 0-rings that will fit with the same diameter but the only one that will work is the 011, 90 durometer, it is very stiff/strong and can withstand temperatures down to -60f. Although I have not had a problem with the original I replaced it with this and have had no issues and easy/cheap to replace. Personally I really love this marker but totally understand your frustration!!!

[@SpACeCruizeR2o3]

Good stuff scott so hit em with 6 then if they still moving hit em wit some pepper gel sounds good

[@airgunnerreviews7888]

If there still moving after 6 rounds I’m in serious trouble 😎

[@SpACeCruizeR2o3]

​@airgunnerreviews7888 lol I can dig it man what does the tiny 🍊 ones go to

[@airgunnerreviews7888]

I am told it goes to the plenum

[@LessLethalOptions-82323]

Your replacement O-Rings recommendations are great .. so far. What is the size of the O-Ring on the end of the Bolt? It is not 011 or 021. Thanks!

[@airgunnerreviews7888]

I haven’t figured that out yet!

[@felo6035]

Thank you. I bought a kit, too, but I will not use it until I have an issue. By then, I hope there is a diagram available.

[@airgunnerreviews7888]

Sean at Less Lethal for Dummies just got his so I’m sure he will set us straight on where they go!

[@felo6035]

​@@airgunnerreviews7888That would be awesome and very much appreciated 👍

[@RingWraith66]

For how much the kit cost they could at least include a diagram of where all the rings go, especially the colored ones.

[@Unus_mundus_]

29.99

[@TheJerzeyGuy]

That lite blue one goes in the plenum

[@airgunnerreviews7888]

Thanks!

[@Spyderco888]

What is the plenum exactly? Plz and thanks you??

[@airgunnerreviews7888]

The plenum is the black piece with the holes that slips over the bolt

[@TheJerzeyGuy]

@airgunnerreviews7888 yes sir, i don't know if that's what the company that makes the Pistelle calls it 😂

[@THELESSLETHALSPOT]

Nice. Mine are on the way!

[@airgunnerreviews7888]

I think you’re going to be happy with it! Good luck!!!

[@thystruter6869]

Thanks 👍 for video about joule output of byrna and salt market,a while ago ,do you think the byrna with solid rounds is adequate for self defence, thanks very informative video!!

[@airgunnerreviews7888]

In my opinion it is more important to use a projectile that is the best barrel match for power and accuracy, the Grimburg 8 gram are awesome but a little small for the barrel (684), the Byrna kinetics are 687. So a heavier solid round shoots slower but can have the same or less fpe than the lighter Byrna’s. The barrel of the Byrna also travels inside and surrounds the projectile when squeezing the trigger and over time using a heavier round can do damage. I alternate the kinetics with Duke extreme pepper rounds to maximize effectiveness.

[@Lesslethalbandit]

Awesome

[@romulodiaz5481]

Exelente

[@operator5677]

So is the problem cheap ass o rings used during manufacturing process? I ordered mine today and now I’m irked to have a problem on the way for near $500.00 then charge me to repair it! I smell lawsuit

[@airgunnerreviews7888]

I have emptied at least 25 c02 air cartridges shooting the Pistelle and the launcher has worked flawlessly! There have been reports of a few of them blowing an 0-ring and the company decided to release a kit just in case. With any high joule launcher you do run a risk of this happening but it doesn’t mean the 0-rings are cheap. I believe this is one of the best launchers in production! Having a spare set just gives you piece of mind just in case it happens, I think you will be a big fan once you take your first shot! Good luck!!!

[@operator5677]

@@airgunnerreviews7888Thank you for your thoughts in easing minds in this. Though I’m not a prohibited person who may count on this for defense of self and family this company charging for potential defective components while in a warranty period of one year is a non starter so any returns should be free and parts and labor covered. Currently I see $29.99 to $34.99 for this O ring kit. Madness

[@airgunnerreviews7888]

I totally understand!