NT Carburetor Cable Installation

[@UtopiaSkies]

Great tutorial bro.. you literally broke it down step by step showing a clear view of each part & you wrote out the name of each part along with specific details on how to put it all back together BEST VIDEO I'VE SEEN explaining this

[@JustinDowDIYcentralhighway]

Excellent Video. Watched 8 other videos and your the only one that showed the Throttle cable to Carburetor install portion. Thank you very helpful

[@jesse1136]

Dude no kidding. How ridiculous is it that there are 3,387,3728,783 kart and mini bike channels but NOT ONE could I find with instructions for the cable. Thank yoj.

[@jmoney6825]

You a legend seven years later

[@NoName-c4y7h]

8 years later, Thank You.

[@ItsThe675]

Trying to get that damn throttle cable attached while holding back the spring, especially since it's a new spring going in, is such a pain in the ass. Without this video I would have given up🤦

[@FrancescoSorrentino-ws7mx]

Non sapevo come si montava il cavo grazie per questo video

[@moondawg3693]

Thanks very much. Watched this once and did my bike, the mark of a perfect instructional video. Well done !!!

[@KuntryFried_ATV]

Thank you thank you. Got my son's pit bike up and running 5 minutes after watching this. You got a like and subscribe from me.

[@sleepyrasta420]

Thank you so much. Straight to the point no waffling on i need to do this to my bike tomorrow I'll be rewatching it then. I've subscribed.

[@nate6692]

Thanks. I'll add for anyone who missed it - the video actually shows it correctly, but I missed it the first time in the glare on the screen outdoors. He says line up the slot with the idle screw, but the locator pin actually OPPOSITE the idle screw. Scared my kid half to death when I fired up his handmedown 110cc ATV the first time and the throttle was stuck WAO. Thankfully I had it up on blocks just in case.

[@alexsgarage01]

same i was just shocked and stood there like an idiot while my bike was about to grenade itself

[@LNRRidez]

My son just ate shit on his go kart today because I put it together wrong lol

[@elsonab4283]

Thank you so much. This was really helpful to me. I'm new to this hobby.

[@KenRupin]

Quick and easy! Thank you so much!

[@alvarezguitar87]

Thank you!! Love the video

[@hydejekkyll1367]

I got to save all the background music I've ever heard on these kind of videos this is my favorite one is the only one that don't bug me.

[@853rudedogs2]

Your a bloody legend mate

[@bobolson5086]

Right on bro thanks for the help man you gave me the confidence I needed to do that dude I really appreciate that good video

[@watsonodin5110]

Instablaster

[@fernierodriguez3838]

What the cap that screws onto carburetor i seen yours has like a nut you twist mine dosent

[@elboricualoko123]

I can’t seem to find the length of cable I need withthe right ends. I have a Coleman kt196 go kart I just installed a new carb with this pin setup. The old carb allowed a cable with no barrel end. Is there a way to run a cable through this carb with pin setup with no end on the cable?

[@robertd6273]

No, this carb requires the cable with the end on it. We sell a cable kit to make a custom cable any length. www.pistonbikes.com/product-p/epfc14in.htm

[@AliAbdullah-oi3wc]

Heck yea! Thank you!

[@abdoulayesanogo5532]

Moi c'est Sanogo Abdoulaye je suis mécanismes de moto An côté voir et je vous félicite pour l'amour de votre métier

[@alienlatino2945]

LOL I came here because I messed with that thing and then couldn't put it back together, had no clue how to do it, now I know how, thanks!!

[@metal2951]

thanks

[@jamaicangardener8523]

Great video. Please make more of these maintenance videos. I have a 78 Honda c50. This was helpful

[@VivekYadav-gc8pu]

The

[@jimmywhitlow7174]

@@VivekYadav-gc8pu The? Lol

[@Str4ng3F0lk]

Mine is new, I'm assembling it for the first time and the round slide is stuck. How do I get it out?

[@gromitbrev1031]

Thank you.

[@Jsanch23]

Thank you for making this video, I just fixed my sons pit bike

[@daltonhunter5769]

Super helpful vid

[@anthonysousa7899]

Can I just buy or find a pacman clip? It's the only thing I'm missing.

[@hypertahir]

Thanks 🙏

[@akmaldawson5187]

Awesome

[@prashantjha3987]

Very very thank you today this video is very helpful full for me, I reached my place with the help of last minute of this video Thanks again

[@artguess9893]

Good on ya bro, great vid!

[@softballrocks10100]

added a new carb on 1990 xr90 new carb had the little clip but no pacman clip......wont start now or if it does it starts wide open...slides in properly....help driving me crazy

[@rabinapierrevincent3002]

It helps me a lot boss. Thank you

[@deepakparmar2912]

Thanks! this video is very helpful full for me, Please whole video! of Suzuki Assess125, 2013 Model How far does that plastic housing for the needle and spring, slide into the carburetor??

[@titusballsportsministry9680]

should I really take the carburetor off my bike to put the cable?

[@buzzardsbass1137]

I've watched probably all of these NT carb installs and adjustment videos but only recall ONE that mentioned the JET where the person found the jet loose, not even started~!

[@gregdean2012]

Thanks mate back on the track.

[@johndehoney636]

Great video on this carburetor I fix my problem Thank you

[@anonymous2065]

When I put my new cable in, the slider doesn't go all the way down to bottom of carb, and it revs high when I start it. Is it the wrong cable, or could it be something else. I've taken carb off 5 times now and it still has same issues, Please help me somebody

[@stillben]

i am having similar problem. my cable is too tight with the new needle in place. barely turns on the throttle grip.

[@anonymous2065]

@@stillben Yh, it was crazy, the cable i replaced was the exact same size as the one i took off but it was too short to release the carb slider when fitted, so i got a dremmel and took off 10mm from the cable protector at the carb end and now works fine.

[@stillben]

@@anonymous2065 That's an idea. Yrah crazy thought it would all be standard. I found the cable guide that bends around was longer on my replacement carb, and was taking too much of the slack, so I am swapping that for my original honda one. My replacement spring seemed too long too so will try original though tired spring. If those don't work, will do your dremel trick. Good shout!

[@nicholesorallo8689]

Anung brand ng carburador yan boss

[@Ealps]

Perfect video man

[@angelicamoreno80]

Hero

[@kvppvk]

Don’t you think it would be more useful for viewers to hear your voice instead of that background noise - after all whatever language you speak someone would benefit.

[@muhammadsagar6403]

Mere pass Honda CD70 1986 model point sistem Gaari he agar point sistem ko cdi me change karwaon to koi problem Gaari Ni Kare gi or kharcha kitna aaye ga

[@albertbaltes6140]

Thanks so much - would have had it in upside down if it wasn’t for this vid!

[@bryancinches8967]

thanks for this helped a lot

[@hakosama]

This helps a lot. Thanks much.

[@keithlutz2063]

You covered up the part I waited for the whole video! Haha. How far does that plastic housing for the needle slide into the carburetor??

[@tyronehunt5836]

Keith Lutz all the way

[@briangoulet9349]

“”8”6 y you hgand up l who’d

[@briangoulet9349]

Y@@tyronehunt5836 yyyy

[@reytubetv6177]

salamat paps ito talaga hanap ko. malaking tulong to salamat ulit

[@mickhudspeth1756]

Thanks - really helpful

[@ArshadAli-ib8cr]

thank you so much sir aap ki wajah se Meri bahut jyada madat Hogi thank you thank you thank you so much

[@owenmullahy3558]

Thanks a lot this video was perfect for what I needed to fix, thanks

[@amitkumarkumar2752]

L

[@edwardkulczynski5588]

Took my old carb. Apart can’t get the old one out need some ideas

[@nahuelarregin882]

Mi bicimoto no tiene fuerza que puede ser

[@purplepimpdaddy2246]

Where could I find a Pacman clip at?

[@steelheadlbs34]

Good video. 😂 music had me ready to go!!

[@markh.2899]

Thanks! This is exactly what I was looking for !

[@bemotivate3149]

same

[@NiteRyde]

Needing help, I did everything in the video but the Throttle never slings back, it just says

[@jiyakhancomedymovie7310]

Very very good

[@FranciscoRamirez-qj9pm]

Quiero saber en forma va la aguja en que posición tiene una ranura larga y otra corta como se coloca

[@lonpascual184]

thanyou very helpful

[@sachinchari2829]

Thanks bro

[@ftw65911]

Awesome video..thanks man

[@kilowatttheorignal]

Soo what if the parts inside at firsy are stuck

[@umarmehar8671]

ya kon se bike ka carburetor ha

[@jgcomputers2202]

i can not find the cable set anywhere, any ideas

[@aristotlecarmonaofficial]

Yamaha ytx how to install starter cable step by step

[@billcurtis7472]

I put the new one in but not the new spring ji still not getting any throttle

[@OLMECTHUGS]

Thanks for the video ,living where I do I don't have any mechanic near .I did everything like your video shows but the only problem I have is that I bought a new carb and can't get the old carb top off it keeps spinning ,Someone said that it was treaded ,I never changed a part that is treaded can you make a video on that or where you think I can find more info?

[@DrPrymeTyme]

OLMEC THUGS there might be a little set screw in the side you have to loosen

[@jimmywhitlow7174]

Threaded, simply means you screw the cap off. And as previously stated, it may have a set scew that you have to loosen.

[@OLMECTHUGS]

Jimmy Whitlow thank you the bike is gone , I sold it

[@TVSinh666]

Still waiting for Hitman.

[@MuhammadHassan-wd9xm]

Ab ki br video ko camera ko pore samnay rakh kr bana na

[@timothyaustin345]

We're can I get on I have a 110cc and need a new cable and can't find it we're can get the nt carb throttle cable your showing gonna the video

[@robertd6273]

PistonBikes.com. Look for throttle cable

[@samdibsyd6183]

Why is the spring important please help me

[@robertd6273]

Sam Dib - the spring is important so the throttle will snap back. Without it the carb would get stuck in the open position

[@redneckwithajeep5001]

Robert Whetzel funny enough I need a new spring for mine. It barely moves the throttle at all

[@rajap5148]

Super

[@vaughn1691]

I can’t take mine out I think it’s stuck or something idk

[@robertd6273]

Slide might be dragging on the guide pin. Or might have been installed with the pin not in the groove

[@bluepen215]

Good i will try

[@arvindpanday9725]

Good

[@IsrarKhan-te6ce]

Very nice 👍👍 👍

[@groovyshoos5200]

Thanks man

[@hamzabennai7059]

Merci

[@kiranthakor9897]

Video banane ke liye thanks

[@AbdulHamid-gs8vx]

super👌👌👌💚💛💜

[@peteryates9153]

Awesome Cheers buddy 👍

[@chetjuuh5189]

Tnx bro ❤❤

[@rolex6091]

Ok so I followed the instructions exactly problem is when choke is on full and accelorate it stalls..and when I reduce the choke my quad revs it’s nuts off and tries to fly off, any ideas

[@dustysafrit6094]

ALEX R having the same problem with my sons go-cart, hope you got it fixed bc I can’t get this thing running smooth to save my life!!!

[@nate6692]

Hopefully you're not still stuck, but for anyone finding this in the future - once you get the slide in correctly, head to the videos on tuning the mixture/idle setting. That was frustrating keeping it running long enough to set the mixture and idle - I had to go a bit overrich first.

[@simanchalswain07]

OK thank you

[@kiranthakor9897]

Thanks bhai video

[@davidmorgan8612]

Great video, crap music Please, no music or discuss what you are doing as you do it.

[@umarhayat6591]

Nice channel,,m mkinik umar ch

[@joecharron3984]

Please send this video to bike berry.comp because their coustermer service has no idea

[@shankarjadhavshrikant6633]

Mare activa gadi chalet fact speed cam jade ho raha hai

[@dharmendrabatham4851]

कीमत तार की रेस के

[@khart02]

Gas to the carburetors is not getting gas,And won't start, how come??

[@Pistonbikes]

Check that gas is coming out of fuel valve, valve has a pick up screen in it that can clog. If fuel is getting to the carb, check that main jet is not clogged. Also check that the float levers are operating and not cutting off the fuel.

[@tonysilva8771]

XxGamergirlxX ! Full o

[@7awrence]

Thanks. (painful music though)

[@robertd6273]

Sorry about the music, it was the only royalty free I could find at the time. I’ll look into changing it.

[@7awrence]

Haha. Great video though.

[@s.b.d.kkohliboy7708]

Hi

[@nabilafaisal4987]

karbu fit x

[@alfonsomacias6745]

Can anyone pls give me a carburetor cap mine broke

[@cloroxbleach4396]

Alfonso Macias i can

[@manikantagoud2658]

Manikanta Goud

[@shyampc4435]

shyam pc