I am posting this not to get on anyone's bad side but rather I don't want a novice coming out here thinking they bought a dysfunctional cooker. Cooked and competed with the PBC for years. You guys keep treating this thing like a smoker. Temperature control is important ON A SMOKER. And yes, you need to ensure you don't get too hot ON A SMOKER. The PBC is not a smoker. It's never been advertised as a smoker. The cooking environment is a smoke fog. I have made award winning brisket, ribs, and chicken with absolutely zero mods. Yes, a SMOKER that gets hot will dry out the meat and burn. In the PBC, it doesn't matter because unlike a smoker, you have a very uniform heat environment that is also very moist. Because of that, the temperature simply isn't important. The only way an PBC can get too hot is if the lid isn't seated correctly or the damper at the bottom is set open too far. Furthermore, because of the smoke coming from the drippings, you don't need wood. I have used wood three separate times and the difference wasn't different enough to matter. Noah Glanville is an experienced BBQ man and if the PBC worked better with the mods recommended here and in other places, they would be on the unit. If you are getting bad results with the PBC out of the box, you are doing something wrong. Once people go to a different fuel or deviate from the instructions and recipes on the PBC website, they trip over themselves and then blame the cooker. For example, butcher paper doesn't work very well on the PBC as it allows too much heat in during crutching and with no drippings, the environment is hot and dry. If you crutch with double foil and broth, you will place in the competition every single time. EVERY SINGLE TIME. ---off the soapbox
@topranked54654 жыл бұрын
Thanks for the very insightful comment. What's your take on using Royal oak instead of kingsford blue?
@lawrencegarcia13704 жыл бұрын
Truth, no mods neccessary..best chicken and ribs I've ever made...even compared to my big ass stick burner. Best cooker I own period.
@bechtoea4 жыл бұрын
@@topranked5465 Stick with KBB.
@ericb52734 жыл бұрын
@@topranked5465 I tried other charcoals long ago and always come back to KIngsford Blue Bag. The reason is, as confirmed by Pit Barrel Cooker's earliest videos, the unit was specifically designed for Kingsford Blue Bag. The temperatures and vent settings are built around KBB. I am not saying you can't use other brands or whatever, but I am saying that the KBB is what the unit was designed for.
@UnityFirearmsLLC4 жыл бұрын
Interesting... i will be picking up the PBC for the lack of mods that this gentleman is adding to his pbc. Different strokes for different folks, but I believe the pbc was made for simplicity and ease of use. Setting it and forgetting it. Trusting the temperature it produces without having to adjust any vents or check pit temperatures. I hear it’s a rib making machine straight out of the box. Can’t wait to get one.
@danoesq2 Жыл бұрын
I just use foil around the rebar to keep the temp at 225 to 250. Putting a probe through the existing hole works good. Putting the weber vent on top is cool, but if I need that much heat I'll use something else- like a weber.
@mirickarries4 жыл бұрын
Very useful and informative video. I prefer the grommet at the side top then I can move the lid more freely without disturbing the thermometer
@Searedandsmoked4 жыл бұрын
If I had to do it over again, I might have put the grommet in the side as well. thanks for watching
@johnbriers69744 жыл бұрын
To each their own, I would only added the Temp. gauge but that's me. I do like your ideas.
@erickmonroy53633 жыл бұрын
I personally thought the damper was a dumb idea, but the temp gauge for sure👌
@BigLewBBQ6 жыл бұрын
I think the damper is a good idea. On my 55 gallon UDS I made one from an aluminum pot lid. With the magnets you can now shut the smoker down for quicker shut down and sparing charcoal.
@ski22305 жыл бұрын
Your ideas are great but I wouldn’t have drilled unnecessary hole to insert thermometer reader. Instead use the existing holes that support the rebar.
@Searedandsmoked5 жыл бұрын
I actually might drill another hole in the side at some point for a different grommet setup. Kind of wish I would have done that originally.
@gregorykennedy2643 жыл бұрын
My thoughts exactly!
@dennis935812 күн бұрын
@@Searedandsmoked now you have to deal with it every time you open lid...
@LekanOyefeso6 жыл бұрын
I love my PBC as well but had the same gripe about temp control. My solution for that was a BBQ guru. All you do is set it for whatever temp you want and walk away. They make a fitting that goes inside the PBC and the fitting neck stick out from the intake. Works perfectly and the smoker stays within 10 degrees of whatever temp you set it at. That's the only l mod I needed since I also use a wireless digital thermometer.
@Searedandsmoked6 жыл бұрын
Lekan Oyefeso yeah.... those work great. i have one of those and a flame boss as well that i use on my green egg... i have not rigged it up on the pbc yet. have you found that it burns longer with the controller? i got about 10-11 hours with out one so far
@LekanOyefeso6 жыл бұрын
Seared and Smoked It does burn a bit longer when set at lower temps, which is nice when doing a brisket at 250 or so. I've definitely noticed that the food I make turns out much better with consistent cooking temps. Briskets are absolutely amazing!!
@duanewilson39415 жыл бұрын
I just added a party q to my pit barrel. It works great. made some ribs at 275. Once the ribs were done I let it run just to see what would happen. I started the ribs about noon, they were done about 430. It was still holding 275 when I went to bed at 1130. I shut it down after that.
@MrTwon3345 жыл бұрын
Duane Wilson Did you have to make a mod to get the Party Q to fit?
@MrTwon3345 жыл бұрын
Lekan Oyefeso Did you have to make any mods to get the guru to fit? Would you mind sending a pic
@TacticalSBR5 жыл бұрын
I have the same smoker, I did use your idea for the magnets which I think work well to help fine tune my temps.
@LouisatRshackBBQ6 жыл бұрын
Nice mods. I like the grommet for probes. Next time after you have drilled your holes-flip the lid over and run your step drill through the backside-this might remove the burrs quickly and easily-still will have to do some fine sanding but it should remove most of it.
@Searedandsmoked6 жыл бұрын
qwesthunter at R shack BBQ Ahhh... that’s a good tip... I knew there must have been an easier way. I made that too much work! Thanks for checking out the video
@lupemartinez22196 жыл бұрын
@@Searedandsmoked why didnt use just use one of the rebar holes to run ur wires instead of drilling an exta hole on ur lid
@Searedandsmoked6 жыл бұрын
Lupe Martinez 123 I found it kind of a pain to have the wire and probe through the rebar holes. I like the hole in the top, as the probe stays out of way of everything... or a hole in the side would have been fine too.
@CoryWard19705 жыл бұрын
Really awesome mods! I've had this cooker for a few years now and I plan to make these mods soon. Thanks for the video! I love your channel
@Searedandsmoked5 жыл бұрын
Thanks Cory... have fun with that PBC!
@richlopez58964 жыл бұрын
EXACTLY what I had planned for mine.Perfect video for me to come across
@kidhiguera6 жыл бұрын
hey nice modifications for the PBC, I would´ve recommend to drill the hole for the probes on the side of the pit (not on the lid), this way, everytime u want to check your meat you dont have to take to probes off before lifting the lid. Just a thought. Nice video!
@Searedandsmoked6 жыл бұрын
Thanks! I wrestled with that decision for a while. The main reason I chose to go with the lid in the end was lack of confidence in what I was doing... so I figured it would be easier to find a replacement lid if I really screwed it up... lol.. but I totally agree with you on the body being a more ideal placement
@kidhiguera6 жыл бұрын
Seared and Smoked looking fwd for more of your videos Sir, greentings from Mexico.
@bbqnbear64355 жыл бұрын
Cant you use the holes where the rebar is at for your probe? instead of drilling holes in it ?
@JP-pl9mv3 жыл бұрын
@@kidhiguera Saludos, en donde estas ? Yo estoy en Autlan JAL.
@kidhiguera3 жыл бұрын
@@JP-pl9mv Sinaloa!
@ViewTalay4 жыл бұрын
You can also shave down a win cork to plug one of the bar holes
@jakeziegler65033 жыл бұрын
That's a nifty trick. I have heard of people covering them with magnets. But my lady has been saving wine corks for awhile and I'm sure she won't notice if a few go missing. Haha. I just got one and am hoping to do my first cook in a few days.
@simekky6 жыл бұрын
Good, it wasn’t just me wanting those features. They need to build in those improvements at the factory! Thx for sharing.
@Sobe48793 жыл бұрын
After 29 different prototypes, I don't think "the man" over at PBC gives two shits about having a temp gauge and air vent on the lid. It was designed for SIMPLICITY.
@THEREALSHOWBBQ6 жыл бұрын
Hey bro that is some great ideas and mods. I appreciate you sharing them.
@ToneysBBQ5 жыл бұрын
Thanks for that update! I just ordered my Pit Barrel Smoker!
@NOTANOTHERCOOKINGSHOW6 жыл бұрын
Just got my pbc, was wondering what kind of mods I could do to be able to control temperature easier. Subbed. Great vid.
@Searedandsmoked6 жыл бұрын
Its a fun toy... so far I like it for hanging half chickens the best. Ribs pretty damn tasty for a 3-3.5 hr cook too. Thanks for checking out the video
@mynamea.n.s.s5472 Жыл бұрын
Now let me know probably cause I just got one today did you f it by changing it
@NateBedair Жыл бұрын
I have done any mods yet (someone else did a temp probe in the lid before my dad acquired it and then I inherited it). I would like a better method for adding wood (I like my stuff smoked) and I don’t like how high the temp tends to spike if you open the lid for a while to add wood. I’m liking the idea of the magnets. When I’m using the grill to smoke say a Pork Butt, that’s a perfect low cost addition to help control temp. Also, I’m trying to figure out how to have better inlet control. Maybe a giant magnet? 😂
@lorenzopinas55967 ай бұрын
@NateBedair I like the idea of adding more wood and coal from the side without cracking the lid thus was thing of cutting an piece of the side and adding an hinge as an entry to add wood when desired instead of taking off the grill when smoking.
@OnTheFritz6026 жыл бұрын
I like that Weber vent on top, and am surprised this doesn't come stock with one of their own.
@MrArock474 жыл бұрын
Backyard bbq beast. Love it man.
@Searedandsmoked4 жыл бұрын
thanks man.... have a good day!
@EdHourigan6 жыл бұрын
Thanks for the tips. I loved my PBC before making these mods. Now it is even more versatile because I can control the temperature better, and also keep the temp low for brisket.
@kyletracey58195 жыл бұрын
Nice vid. Perfect mods on a great build ! Thanks for taking the time. Its alot of work filming , edit and posting. Enjoyed that watch. Congrats to the addition to your family. Thats a handful right there. Liked , subscribed and hit share bud !
@Searedandsmoked5 жыл бұрын
Thanks for checking out the video! ... have a good one!
@kyletracey58195 жыл бұрын
@@Searedandsmoked will do thanks ! Have a great summer ! Keep on smoking ! All the best
@OkieSmokin3 жыл бұрын
Nice modifications no doubt 👍, but I got the Pit Barrel because I didn't want to have to worry about dampers and temperature control lol. So for me I like the just put it in and forget about it. I will be getting some magnets though, that's a nice hack I hadn't thought of.
@OC3OliverFan6 жыл бұрын
Thank you for the video I found out some things and I am going to upgrade my barrel cooker thank you again
@Searedandsmoked6 жыл бұрын
charles plummer no problem... glad you found it useful
@titanhangman4 жыл бұрын
I did a brisket on my PBC for my first cook yesterday and the results were fantastic! I did install a similar thermometer to the one you put on. I did a lot of research on this cooker over the last 3 years and while I understand the simplicity of the design, and how the instructions (and following them) will be all you need, knowing the internal temps did help me to move the bottom vent around a little. I think it's more a case of not wanting to just leave the thing alone! I am interested in the Weber vent you installed on the top. With the understanding that this cooker is not a true smoker in the literal sense, I would think that venting the smoke out of the top to any degree would further deplete the available smoke an cutting it off before it gets a chance to waft around the meat a little more. Maybe having the vent on the side would be a better option, if it's necessary at all? I'm pretty happy with my results and I'll probably skip the added vent but I really enjoyed your video! Thanks for doing it.
@Searedandsmoked4 жыл бұрын
Yeah, I would only add the vent on top if you want to get temps higher. I never really use the vent when doing low and slow stuff. Mainly use it when I am hanging chickens and want to get more air flow in there. It's a great cooker with out the modification. Love it for ribs and hanging chickens!
@robertzenniful4 жыл бұрын
I believe the PBCworks fantastic just the way it comes, if you’re going to start adding his features, you’re better off just getting a Weber
@Searedandsmoked4 жыл бұрын
Just experimenting... I know people love this cooker... not meant to offend anyone
@uglyfacebutthead24464 жыл бұрын
Nice job just what those things need. And you got a new subscriber 👍👍🔥🍗
@RyChannelBrewing4 жыл бұрын
Cheers from Council Bluffs! Thanks for the video
@Searedandsmoked4 жыл бұрын
right on! have a cold one for me out there in CB!
@shooternyc3 жыл бұрын
I agree with the simplicity of this smoker. I also agree that minor modifications would put it in a class by itself. The grommet for a temperature probe I feel is necessary if a probe is touching metal it’s going to run hotter and not give you an accurate reading. I also feel a trap door down below to add smoke chips or extra charcoal if needed would also be a huge improvement. Currently if you have to add during the cooking process it’s a huge pain in the butt to remove everything and add stuff yes the half grate that they sell in “addition” rather than just give it to you in the beginning would alleviate this but only if you’re using the grate if you hang meat through there you still have to remove the meat to add stuff. So a trap door mod would be awesome if they added it in the future. I am going to try and do it myself after I research the best way to make a cut of that size + type of hinge then a way of finishing the edges to keep it airtight? If you figure it out before me let me know.
@Searedandsmoked3 жыл бұрын
the temp gauges have been pretty accurate from my use of them. the gauge and the temp probes I have used ready pretty close to one another. Not looking for anything too precise... just a reading to let me know if it is way too cool or way too hot. The door I would be careful with... might create a bigger problem.
@HogbackBottom6 жыл бұрын
Have you ever thought about adding three additional side tabs for holding a second, lower grate below the original grate? This would provide: 1) additional grate surface for smoking; 2) a lower grate shelf on which to place waterpans, dripping collection pans, etc. below the original grate. 3) a lower cooking level for searing and grilling closer to the coals; and 4) a shelf on which to place an aluminum disc, folded piece of aluminum foil or other diffuser to facilitate lower, slower, more indirect cooking. What do you think?
@Searedandsmoked6 жыл бұрын
Jerry Percy I would like to add a diffuser plate of some sort to help more even cooking temps. i think that would help larger cuts of meat cook more uniformly
@HogbackBottom6 жыл бұрын
Seared and Smoked I agree the diffuser plate would do that; but even more important to me are at least three other things a second, lower grill grate would provide: 1-double the space to cook meat placed on the grates (when not hanging); 2-a place to put a water pan, dripping pans, etc. below meat cooking on the grate; and 3-a lower cooking level-closer to the coals- for searing and for cooking “hot and fast”.
@incanus9 Жыл бұрын
I found out by accident that the three leg stand will hang upside down on the existing tabs, and you can slide the handles of the existing grate onto the circle part of the stand. This works if you have something else (like cinder blocks) to stand the cooker on.
@HogbackBottom Жыл бұрын
Veddy interesting. Thank you, Nathan!
@farfanbestplayergaming13458 ай бұрын
Why break it when it’s not broken. It works perfect the way it is designed
@ChristopherLowery6 жыл бұрын
I just got one last week and did my first smoke on it last weekend (4 lb pork shoulder with a simple dry rub). It was my first time smoking with a real smoker (I'd bastardized my gas grill to make it smoke before, but it was a hassle and a lot of work to keep it running right and keep the temperature in the right range). Once it was lit and the meat was on, it stayed rock solid between 200 and 250 for 5 hours before the coals went out. All in all, it was an amazingly easy and fun experience, and it was some of the tastiest pork I've had (better than bacon!). Anyway, one thing that I didn't like was manually checking the temperature, so I wanted to add a temp gauge, but I'm debating between putting one on the lid vs on the side. I'm not anywhere near an expert and just learning as much as I can, but I was hoping to hear your reasoning for choosing the lid and what you might consider the benefits for either to be. Great video! I look forward to getting a lot better with this smoker and putting my first pork shoulder to shame.
@Searedandsmoked6 жыл бұрын
Hi there... I chose the lid mainly because I did not want to put any holes in the main body of the smoker. I think either way is fine. I am sure there is some temperature change from top to bottom, but I just wanted some sort of sanity check on the temperature. I have put temperature probes in at the grate level and it reads pretty much the same as the gauge on the lid. thanks for checking out the video... Keegan
@ChristopherLowery6 жыл бұрын
Thanks for the reply! Now I just need to figure out how to lower the temperature if I overshoot (tried hanging ribs last weekend but couldn't get it below about 300-325, so it cooked too fast and dried out)
@quito08196 жыл бұрын
You might want to check your vent setting ans make sure your lid is properly seated. I bent the lid lip and didn't notice it till I realized that the lid was open a crack... Once I figured out how to hook it; the lid closed with no problem. And I had to adjust the vent a bit as I am around 1700 feet up... HTH
@truthseeker58902 ай бұрын
Very nicely done. All of those things should come standard with the barrel! For those who don't understand, this is just a barrel; barrels are everywhere and they can be acquired for free!!! I own a farm and I could walk around the yard and see no less than 25 steel 55-gallon and 30-gallon barrels! As of today (6-16-2024), the 18.5" barrel is priced at: $399.99! $399.99 for a barrel! Again, the fact that these things were not included with the purchase and already installed is ridiculous! It's laughable! To make it even worse, the 22.5" is currently (6-16-2024) priced at: $499.99 and it does not come with any of these features either! A Weber 18" grill grate is currently (6-16-2024) priced at: $29.99 (Ace Hardware) and it's HINGED which would allow a person to drop more charcoal into the bottom without removing the entire grill rack to make such a simple move!!! Again, these things are laughable! These "barrels" are priced at least 60% too high!
@SearedandsmokedАй бұрын
i definitely agree with some of that... a few bells and whistles just make it more fun and usable too
@stephenrennie17332 жыл бұрын
Good ideas for a barrel cooker smoker.
@Searedandsmoked2 жыл бұрын
thanks for watching!
@gsbbq48703 жыл бұрын
I put my thermometer on the outside right above the cooking grate area.
@Searedandsmoked3 жыл бұрын
Also a good choice. Looking back... I might have done it differently? Nice to know the temperature either way
@Duschbag6 жыл бұрын
I've had my PBC for a few months and have thought of adding a thermometer but really like your Weber Damper idea too. I'll be on Amazon as soon as I get to my office in the a.m. Thanks for your informative video.
@Searedandsmoked6 жыл бұрын
Warren Pouyer no problem... i’m glad you found some useful ideas. i’ve really enjoyed the damper... great for a controlled temperature boost
@Duschbag3 жыл бұрын
After finding that my modifications failed to offer much benefits and instead made it more difficult to hold temperatures accurately, I actually tossed the whole thing in the Garage and bought a new one. Leaving it the way it comes from the factory is working MUCH BETTER. All I've added is a pitmaster IQ designed for the Pit Barrel Cooker. DON'T DRILL HOLES IN YOUR PERFECTLY GOOD BARREL.....
@robwelniak37655 жыл бұрын
If you use the step bit from the back side, it will debur the hole.
@cookingwithwebby5 жыл бұрын
Great ideas am going 2 do this with min. As it runs about 350 with vent closed at bottom
@michaelduval1595 жыл бұрын
I had this problem to the barrel was out of shape do your measurements and or call pbc
@GiacomoCalabrese3 жыл бұрын
I have been more successful keeping my pbc temp lower by closing the vent in summer and using only 5 or 6 lit coals and using a half filled basket to reduce the fuel, air and rate the fire is able to spread. In winter I open the vent more to adjust for colder air fill the basket and light more coals. Just simple tricks to get you in your desired cooking zone. I do like the thermometer and air flow additions you added here though and have no issue adding those myself just to track what Temps works etc for reproducing successful results.
@drycoconut58983 жыл бұрын
Awesome! Glad I did some research and found you......nice vid. What size bits used for vent and temp gauge?
@empathysgone9611 ай бұрын
Great video!
@Searedandsmoked11 ай бұрын
Glad you enjoyed it! Thanks for watching
@MelvinJacobs-jt3kq9 ай бұрын
Hello what about adding wheels to it
@nukiewin7 ай бұрын
How accurate is the Temp gauge placed on the lid?
@mynamea.n.s.s5472 Жыл бұрын
Your the little boy on the news with your face painting saying I like turtles 😂 now he likes chicken 😂 sorry 😅 great video
@GreyCountyGrillin6 жыл бұрын
The PBC will definitely be my next cooker, I've heard nothing but good stuff about it! How much of a difference did the damper make? Great video! New sub here!
@Searedandsmoked6 жыл бұрын
Grey County Grillin' Hi there! The damper has worked great for cooks where i want the temp a little higher. I was able to hold it close to 350 for chicken wings.... rendering some of the fat out for good crispy wings. I have enjoyed the grommet for the temperature probe too.
@GreyCountyGrillin6 жыл бұрын
Good to hear! They seemed like some pretty awesome mods for a cooker that's pretty awesome to begin with. Thanks for getting back to me, I appreciate it.
@sm96136 жыл бұрын
The grommet, I would have placed it on the side of the barrel below the thermometer. Then I would have taped it with heat tape to the thermometer with the tip sticking out a bit. With the way you have it on the lid it’s an inconvenience taking the lid off and on. This unit wouldn’t work for me! Reference: I have 6 different types of barbecue units.
@tonythetuner97636 жыл бұрын
Next time just take your Uni Bit & lighty drill from the other side. It will debur the hole & get rid of all that metal in second's without wasting time & labor with a file. Just made a Weber/UDS myself. Look forward to a new smoker
@mikesr30113 жыл бұрын
Like your video. Very good ideas.
@Searedandsmoked3 жыл бұрын
thanks... i appreciate you checking out my channel
@nigel84996 жыл бұрын
Wish they had a UK supplier. Great video as always.
@Searedandsmoked6 жыл бұрын
How is amazon shipping to the UK? They sell on there. Its a pretty good unit for the money. Still love the green egg the best.
@nigel84996 жыл бұрын
Seared and Smoked Hi Keegan, they have one listed on Amazon UK at £201.50 PRIME, but it has 'Batavia' on the side. Do you think it's a 'knock off'' or the 'genuine article/real McCoy' thanks
@Searedandsmoked6 жыл бұрын
is it this setup... kzbin.info/www/bejne/mKOplGiEftytm8U If so, not the same thing, but it could still work fine. If you really want a pit barrel, I would just get in touch with the company... I am sure they would ship you one. they have a reputation for awesome customer service
@nigel84996 жыл бұрын
Seared and Smoked okay, thank you
@davidbarnett5226 жыл бұрын
I got one last week from a garden supplies co in the UK, cheaper than Amazon!
@Texas4x3 жыл бұрын
I know this is an older video but if you use the same step bit on the back side, it completely deburrs the holes quickly and easily.
@Searedandsmoked3 жыл бұрын
thanks for the tip. a few other viewers had the same trick for me. sadly... i have not used a step bit since! I will definitely remember that if I use them again. thanks for watching and thanks for the tip!
@delsurf714 жыл бұрын
I have no problem with you doing mods. I just wish you would have expressed that the #PBC was designed to work the way it did. I got the impression from your voice that it was a fault. Thanks.
@Searedandsmoked4 жыл бұрын
delsurf71 oh, that’s not the case... sorry if i gave that impression. i think it should come with a temp gauge somewhere on it, but other than that it’s great right out of the box
@maksym3d Жыл бұрын
How's the lid holding up after 4 years? I'm thinking the enamel removed when drilling the holes would expose the bare metal and provide a starting point for rust.
@Searedandsmoked Жыл бұрын
I have given this one to a friend, but if you keep it covered, it holds up well. I had no rust or very little on the inside of the lid. But... I did keep it covered when not in use.
@franka83776 жыл бұрын
I run my probes through the re-bar holes and attach it to the grate so I get actual temp reading where my meat is, or the re-bar. Works great.
@Searedandsmoked6 жыл бұрын
Frank A Yup.... I do the same thing... with the grommet hole. Nice little smoker for the money
@rogerridgway70835 жыл бұрын
There is only my wife and I, so I usually only use one rebar for hanging meat. I use holes opposite of each other it so it goes right over the center of the barrel. First, I drilled a 13/64" hole just under one rebar hole. (That's the smallest hole that will still let me run my temp probe all the way through.) I took a 3/4" strip of sheet metal and bent one end around the rebar. Next, I bent a piece of the sheet metal strip in a square "U" shape, and drilled holes to slip the temp probe through. For my probe these holes were 11/64". Finally I bolted the "U" to the strip, located so the probe tip just comes to the grate. So now my probe just hangs under the rebar. Thus the wire" runs" under the rebar (out of the way) to the point where I want to see the temperature. BTW, I have noted a temp difference from the center to the outside of the barrel.
@ricknism5 жыл бұрын
Brilliant
@-Coaltrain6 жыл бұрын
22.5 wsm xxl bge like my wsm been running great for yrs
@Searedandsmoked6 жыл бұрын
word.... I got a large egg... and definitely want a bigger one at some point
@Johnny2419486 жыл бұрын
if the magnets lose their sticky and If you get tired of buying replacements try using cork or a wooding dowel just a little wider than the holes cut and sanded into about one inch plugs which could have a chain around four inches attached to the pit so they don't get lost.
@Searedandsmoked5 жыл бұрын
that's a good idea... just attach them to the handles then, right?
@Johnny2419485 жыл бұрын
@@Searedandsmoked handles or drill small holes for short nut and bolts somewhere near the holes so the chains don't have to be to long
@TomHorsmanAmateurBBQ6 жыл бұрын
#900!!! Ok... I thought I was the only one crazy enough to modify the PBC! Welcome to the Club! Nicely done!
@Searedandsmoked6 жыл бұрын
yeah... I am waiting for the smack down from the PBC community... thanks for checking it out!
@kobepaws6 жыл бұрын
Everything can be modified...buy the base model and add things to it....the guy that builds them will like some of the ideas you come up with and incorporate them into his own build...just watch and see....ever buy a car and just leave it as is...or add a few extras that you like? Just sayn
@TomHorsmanAmateurBBQ6 жыл бұрын
Norm Dryden kzbin.info/www/bejne/qZalk61qndxqbKs
@kestutissiurkus84284 жыл бұрын
great Job!:)
@christopherlovato594118 күн бұрын
Why is the thermometer mounted on the lid and not side of the barrel like the competitors barrel grill?
@Searedandsmoked9 күн бұрын
You will get similar readings either way, as I did do some testing on this. But I also did not want to drill into the side of the barrel... figured a lid would be easier to replace if needed.
@bradtanner21996 жыл бұрын
Good job
@Anteater23 Жыл бұрын
What temperature do you get with damper fully closed, and what temperature with the damper fully open? I find it really hard to get my PBC above 250 and so was thinking of doing this if it make a significant difference. Thank you
@Searedandsmoked Жыл бұрын
I have since moved on from the PBC, but from my memory, over 400 was pretty easy with everything wide open. I recommend lump charcoal as well, if you are not using that.
@MikeJones-yf2xx6 жыл бұрын
Mine looks like yours a little bit except I have 2 racks and a smoke stake on top.
@davidlinabury59496 жыл бұрын
@Mike Jones, can you provide a pic of your smokestack and where you got it? I'm curious, would the Weber Damper Kit work the same, better or worse than the smokestack that you installed and are currently using?
@1ProShooter4 жыл бұрын
If the ribs are hanging until very tender, will they fall off? Would like to add hanging option. I plan to build my own, and add a fire box to control heat.
@Searedandsmoked4 жыл бұрын
if you let them hang too long... they can fall off. often I use the 8 hooks to hold half racks, so they really have not chance of falling unless they are on there a very long time. I find 3.5-4 hrs does the trick for ribs on the PBC
@quince104 жыл бұрын
I like the rebar idea. How big the hole for rebar, one inch?
@Searedandsmoked4 жыл бұрын
Sorry for late reply.... those holes are just the standard holes that come with the Pit Barrel Cooker. The holes are closer to 3/4" I believe
@michaell6054Ай бұрын
What about a water pan? Did you add that?
@SearedandsmokedАй бұрын
I never added a water pan when using it. I no longer have this grill, but I was always impressed how moist things stayed in the barrel.
@hbsoldier3 Жыл бұрын
Put the grommet in the side of the barrel. Then you can take the lid off and on leaving the temp probe alone.'
@jackp95896 жыл бұрын
Great video. I want to put a temp probe grommet in my Weber kettle but am worried about rust. Did the now exposed bare steel rust at all where you drilled? I imagine over time it’ll get that cancer bubble rust under the enamel like a car gets
@Searedandsmoked6 жыл бұрын
jack p I’m sure it will have a little rust over time. I did not touch up the paint around the edges or anything. We will see how it goes.... i’ll prob buy another smoker to play with by then?
@garysampson52586 жыл бұрын
It's a simple matter to touch up the paint.
@garysampson52586 жыл бұрын
I see a whole post of people who are not able to drill a hole with confidence and these are people who buy these things. I find it funny that people will pay $300 plus for a garbage can with a few holes and a couple of pieces of rebar!
@garysampson52586 жыл бұрын
Actually, more pathetic than funny.
@jeffreykite29015 жыл бұрын
@@garysampson5258 You are right about the garbage can with holes but on the other hand this garbage can with holes does function well at smoking meat according to the dozens of reviews and videos that I've seen. I have been researching smokers/grills and have found that it is easy to spend twice the money on a smoker that is made of cheap thin metal with welds that leak.Which is probably why people have to obsess about temperature as much as they do. I like that the barrel delivers a nice smoke without the need for constant attention. My purpose is, so to speak, to eat the meat. I would also wonder if the installed thermometer and the small vent plate mounted on the lid would be of much utility. They did not look like quality components and both are sitting at the very top of the smoker which does require some interpretation.. Perhaps it is easier to simply check the temperature of meat as it hangs from the hook or sits on the rack with a quality digital thermometer. The coals will burn for seven hours and they will not object. I know that I could buy the parts and buy a recycled barrel (plus shipping) and install brackets and drill holes for mods. But I don't want to spend that kind of time. In short, if the smoker does its job, I can learn to adjust for the cook.I don't feel a need to save money by recreating something that works.
@jimgriffith29402 жыл бұрын
How did the mods work? Didn't see a follow up video.
@Searedandsmoked2 жыл бұрын
they all worked pretty good. I like the vent for more airflow / higher temps when needed. The temp gauge on top was consistent with a temperature probe I would put at grill grate level, so that worked well. Only think I would have changed is to use a different silicone port for the wireless temp probe, and put that through the side somehow. Not sure what that would be... but I found having the wires through the top to be kind of a pain.
@joegreen5953 жыл бұрын
This is Joe a new subscriber could you tell me how far the rebar rods are apart outside to inside and what diameter are the holes that hold the rebar Joe thank you!
@Searedandsmoked3 жыл бұрын
this grill is currently buried under snow in my outdoor storage bin, or I would gladly measure this for you. remind me in another month, and I should have better access
@david_reynolds36605 жыл бұрын
Remember, this is not a smoker people!!! It is a cooker. It is designed to cook at higher temps for a reason. Brisket in 6 hours instead of 12. And just as good. No need for 3/2/1 ribs anymore. Why change something that works as designed? And a thermometer in the lid is pointless. If you are going to do it, it goes in the side just below grate level where the food cooks.
@timwilt87552 жыл бұрын
Great Mods, I think i would rather have the Groumit on the side and temp in the top and the bottom....
@Searedandsmoked2 жыл бұрын
I temp reading have been consistent and reliable from the top, but if I did it again... I would have drilled a hole in the side to make lid removal easier. I was just apprehensive in drilling the main barrel. Perhaps try to find a smaller grommet solution so the hole would not be too big as well.
@caseyhatten21542 жыл бұрын
It would make more sense to add the probe hole to the side I think. Maybe it is more difficult with the side not being flat?
@Searedandsmoked2 жыл бұрын
I think you are fine to drill through the side too. I decided to make it on the lid though... just in case I really F'd it up... thinking I could get a new lid easier.
@caseyhatten21542 жыл бұрын
@@Searedandsmoked probably a smart plan, 😂
@iamnoone. Жыл бұрын
Easy way to remove the burrs. After drilling holes turn lid over and drill and burrs come off easy
@Searedandsmoked Жыл бұрын
great tip... I few of you have had that same great advice... I know for next time!
@scottlee28255 жыл бұрын
Do you ever have a problem with the meat burning at the bottom or falling off the hooks? About to buy one, but concerned about burn (and ability to do competition ribs) with the 18 inches of real estate you get or the hang down.
@Searedandsmoked5 жыл бұрын
So, I have not had any problems with ribs falling off the hooks. A lot of times I will cut the racks in half and then hang them to completely avoid that issue. With 8 hooks, you can still do 4 racks that way. In a perfect world, I agree that more vertical space and rack space would be nice. I might bump up to a large drum smoker or large Weber Smokey Mountain at some point... too many options to choose from. You do get more charring with the PBC than a green egg or something like that for longer cooks, which I do not mind. Its different, but not in a bad way.
@sm96136 жыл бұрын
It’s more than $20.00 dollars for the parts. What was the cost for the drill bits?
@ccourcha6 жыл бұрын
How did you attach the Weber air damper?
@Searedandsmoked6 жыл бұрын
ccourcha Hi there... the damper came with nuts and bolts so after you get a hole drilled you are good to go!
@davidapetitti73996 жыл бұрын
Hello. I love my PBC, your Mods look great. I was just curious on the temp gauge I noticed you put it near the side. Is that because closer to the center would be too hot and it’s more accurate near the edge? Just curious. Thx.
@Searedandsmoked6 жыл бұрын
I have not done any testing... but I think you would find the temperature pretty stable in the interior, when the lid has been on for a while. I mounted it towards the front for viewing purposes mainly, and centered between the rods, so they do not cause issues with each other. The grommet I mounted to the side, so it was also away from the rods. Seems to work fine, but I have not tested other locations.
@LuisLopez-qf4gn5 жыл бұрын
I started to build one from scratch, did you paint the inside of the barrel? What did you use to cure the inside ??
@Searedandsmoked5 жыл бұрын
Luis Lopez This is a prebuilt unit, so no painting or curing inside needed.
@luislaureano2283 жыл бұрын
better than the magnets and cheaper... use aluminum foil to plug the vent holes on the top
@johnlukin9853 жыл бұрын
Hi. I ordered the same Weber part on Amazon (63030) and it is slightly curved rather than flat. Was this the same for you? If so did it prove to be an issue? John
@Searedandsmoked3 жыл бұрын
I think the vent was slightly curved when I got it. Pretty sure I hammered it flat before attaching.
@Sciprus2 жыл бұрын
What happened with the Bronco Pro?
@Searedandsmoked2 жыл бұрын
still going strong. I have not made any new videos lately with it. still love it though. my favorite for wings these days
@christophermitchell3596 жыл бұрын
I'm kinda surprised at a few comment I've read about not having good temp control with the PBC. It took me a while to get the vent right, but mine runs very consistant temps without mods. How many cooks did you do before the mods?
@Searedandsmoked6 жыл бұрын
Not too many... probably 5. I did not have too many issues with temp control for smoking temperatures in the 250 range. The main reason I added the extra vent was to allow higher temp cooks with more control, vs cracking the lid. I like to cook chicken halves and chicken wings at higher temps to get more crispy skin. Nothing wrong with the PBC out of the box... just another option I wanted to play with.
@tomevans54586 жыл бұрын
Not to be negative, but these modifications were completely unnecessary. Probably should have purchased another smoker.
@AdudenameCHAP6 жыл бұрын
Tom Evans He is clearly obsessed with weber, all he had to do was remove 1 rebar to solve his problem. You only have to mod crap equipment the PBC needs no mods.
@hinds906 жыл бұрын
Some people just like modding. Nothing broke the bank either
@occamskatana95546 жыл бұрын
Let me Guess Tom, you drive a BMW, don't you?
@kyiaboy6 жыл бұрын
Pit Barrel Cookers work perfect right from when you unbox it, if it’s not broke why fix it?
@stantheindian5 жыл бұрын
@@kyiaboy it runs hot, if you want top notch Brisket then 250 is your target temp. I'll be buying those magnets, thats as far as I'm going to go.
@scootr7776 жыл бұрын
Love the video. I am considering purchasing this . I had a side smoker for years and I am looking for something different . One question . If I were to smoke something for eight to ten hours is it a pain to add charcoal or wood chips during the course of the day . I’ve been hearing that this cooker is meant for one temp.. if I wanted to go lower and slower could I do it ?? Thanks .
@Searedandsmoked6 жыл бұрын
If you want to go closer to 200 F, then I would go with something else. It seems to want to stabilize closer to 275 F for me, with out messing with it. I do like the flavor a lot and its nice that it cooks things pretty fast. You can smoke ribs in about 3 hours from my experience so far. You can get it as hot as you want by cracking the lid or installing another vent like I did. But, going real low is probably more trouble than its worth with this smoker. I love my green egg for temps closer to the 225-250 F range.
@scootr7776 жыл бұрын
Seared and Smoked Thanks for getting back to me. I'm just curious about your opinion on off set smokers? I had one for years I know they are not popular with legit cooks. I know you can buy gaskets and clamps to improve them . I was thinking of just getting a green egg . I love to smoke brisket and I heard it was good for that . Thanks for your time .
@Searedandsmoked6 жыл бұрын
I do not have a strong opinion on the offsets.... I have never purchased one. I just hear they take more babysitting. I am sure if you pay up for a good one, they work fine. For the money, I would probably go with a XL green egg. I have a large and wish I had an XL. It does crank out amazing brisket and pulled pork.
@scootr7776 жыл бұрын
Seared and Smoked ALRIGHT!!😂😂 . I think the green egg is out . With all the extras you need we are looking at well over two grand . Not ready for that yet . I think it’s going to be the Oklahoma joe reverse flow off set ( just waiting to hear from them on how thick the metal is on it ) or the pit barrel cooker . The barrel cooker looks so cool and interesting and the food looks like it comes out great on it . Apparently you can make a great brisket on it . What do you think . Ha ! Thanks for letting me bother you so much .
@MrViking19694 жыл бұрын
pbc have been engineered for the holes that are on it now, how much change or control do u get from the weber device?
@Searedandsmoked4 жыл бұрын
MrViking1969 It just allows me to bump the air flow and temperature up. So, i mainly use it to get crispier chicken skin when hanging half chickens
@andypandy85694 ай бұрын
What about putting it on wheels?
@Searedandsmoked4 ай бұрын
so... northern tool has a nice dolly for this... I think you can check it out here kzbin.info/www/bejne/o5yXoodja8SGntE
@davidgolden75246 жыл бұрын
Did you encounter any smoke leakage from the damper?
@Searedandsmoked6 жыл бұрын
D G ... No it’s pretty tight when closed. I find you do not need it open very much to boost the temperature. Usually just crack it 1/4 to 1/2 open and it gradually increases to 350 or higher
@lewisshaw42326 жыл бұрын
Welcome
@MrViking19693 жыл бұрын
curious as where you got magnets?
@Searedandsmoked3 жыл бұрын
those were just an amazon purchase
@sm96136 жыл бұрын
A lot of work for the price of the unit! It should have been included.
@robwhitmore43695 жыл бұрын
I would agree with you 100% it is a chicken cooking machine
@Searedandsmoked5 жыл бұрын
I have not done 4 chickens at once yet.... but I should!
@terryl84476 жыл бұрын
You can't fix perfect
@quito08196 жыл бұрын
Going to try vent open the next time we have steak....Thanks. (on my PBC)
@aaronrodriquez38153 жыл бұрын
Lol good review ...I enjoy the PBS ..makes some of the great chicken and ribs anyone has had ( they say) ...my only down fall of your video ... damper / thermometer isn’t designed for the pit barrel smoker . The PBS is design to operate 250 -300 on its own ... but no doubt the additions may not effect it much ... but if you do not have one I’d get one ...
@bransonperry2495 жыл бұрын
How do you like the PBC after you made your Temp Gauge and vent mod? Thanks
@Searedandsmoked5 жыл бұрын
Branson Perry I like it quite a bit. I use it mostly for chicken as i have a green egg too. i think the pbc rocks at hanging half chickens... really tasty and so juicy. It’s good at ribs too... I have not used it much for brisket or or pulled pork.
@bransonperry2495 жыл бұрын
@@Searedandsmoked thank you for the feedback! I've had a lot of different cookers, big and small, I've never had so much fun as im having with the Pit Barrel Cooker!! Going to start using it during a few competitions. Would love to watch some of your videos with the PBC while doing brisket and Pork Butt. Thank you sir!
@jwseal5 жыл бұрын
Weber, Cuisinart, Mecco, CharBroil, Masterbuilt, and others make similar shaped water bullet smokers that are designed to be monitored and adjusted as you cook if desired. The Pit Barrel Cooker was conceived, developed, and marketed for NO monitoring and NO control. That is its entire purpose: No monitoring and no control yet good results on the cook. Any mod you make on the PBC negates the very purpose for which it was developed.
@Searedandsmoked5 жыл бұрын
I see your side of things. I just like to play around with products. No different that my green egg... its awesome out of the box too, but there are always products or modifications to improve anything out of the box
@jamesgreer89385 жыл бұрын
Nice. I’m just to scared to do it myself. Lol. Nice though.
@kenolson99434 жыл бұрын
How much was the smoker? Amazon is not showing the price.
@Searedandsmoked4 жыл бұрын
the pit barrel is now $350
@patrickmcgee46985 жыл бұрын
When smoking brisket etc. How do you add woods etc
@Searedandsmoked5 жыл бұрын
If you are hanging your meats, then you can use a set of long tongs to drop a chunk of wood down into the coals gently. If you need to add charcoal during the cook, then you actually have to remove the meat and then put it back on. I do not add a lot of smoking wood during the cook, as the PBC has a pretty solid smoky flavor with the charcoal. I use lump charcoal and find I have better burn times with that over briquettes.
@lawrencegarcia13704 жыл бұрын
Patrick I've run this cooking a 13lb packer no need to refuel. It motors around 275 all day no mods needed
@NateBedair Жыл бұрын
Just found this video today (6/4/2023), but what I do is add chunks of my preferred wood into the charcoal as I fill up the basket. Then if I want more smoke, I’ll add more wood during the cook by removing the grill and dropping more into the fire. I’ve only done 2-3 cooks using the grill. I’ll have to experiment with the hooks next.
@knsbbq19516 жыл бұрын
Crispy Wings brine them. No drilling required. Looks nice though.
@MrArock474 жыл бұрын
Bird booster is the shit. Check it out. It's a great brine.
@steventhomas244 жыл бұрын
what size bit did you use for the holes on the daisy wheel?
@Searedandsmoked4 жыл бұрын
i'm sorry... I don't remember at this point... its been a long time
@steventhomas244 жыл бұрын
@@Searedandsmoked np chief thanks for the great ideas going ot use them on my bullet smoker
@ILMANDOFISHING4 жыл бұрын
Hello from Italy, please can you help me? Can you give me some measurement about pit barrel? i want it but here is diffucult to find it, than i want build it own. you want help me?
@Searedandsmoked4 жыл бұрын
the barrel is just 18". I think that is a common barrel measurement, but not sure. sorry I cannot help more than that! good luck!