Hello! I watched a lot of videos on the subject. I do not speak English well. Your video can also be used without sound. The best! Thanks! Cheers!
@shiloh66272 жыл бұрын
Clean and quick maintence instructional, would love see more mate!
@fredrik16116 жыл бұрын
Make more Of vidoes like this. Its Nice to have when you are a beginner in this 🤙🏻🤙🏻🤙🏻
@steviefix68703 жыл бұрын
Your a star! Easy and well explained. Who’s disliking this video seriously!
@motormax60482 жыл бұрын
Because he adjusted the valves on the fire mark rather then top dead centre
@motormax60482 жыл бұрын
Because he adjusted the valves on the fire mark rather then top dead centre
@broncobill8614 жыл бұрын
Cheers lad helped me confidently adjust my valve clearances 👌
@Pitter_crewzz Жыл бұрын
What are the tappet adjustment mm clearance on the z155 160cc
@mtbridingog90837 жыл бұрын
i have a question if i can her a little bit of tapping from my engine can i do this to stop it from make a straight noise like i think its the rod a little bit
@scottmadden9508 жыл бұрын
awesome video mate best one ive seen by far
@crcmoto37517 жыл бұрын
Scott Madden I agree! thanks!
@mrkennethporter2 жыл бұрын
What are the torque specs on the engine covers?
@leesmith46346 жыл бұрын
Would you be able to do a top end rebuild on a yx 140. There are loads about but just to make sure we all do it the right way. Great video btw
@brandnew88796 жыл бұрын
He is wrong for the timing chain, need set at T line, not F line🤔
@gavinmcvey81775 жыл бұрын
Mine is a yx140z2 my cam plate is different from his that's a old skool flywheel
@gavinmcvey81774 жыл бұрын
That is a yx gen 2 engine the first generation yx 140 had two sprocket bolts😎🇬🇧
@high_lyfe85463 жыл бұрын
Mine is a first gen yx140
@benpeach67067 жыл бұрын
I have a stomp 140 and I was wondering if you are able to just turn the flywheel or do you use the kickstart?
@ulysees085 жыл бұрын
If in gear I would imagine you can just rotate the rear wheel.
@jamiewilson77335 жыл бұрын
Tryed this sound like a can of nails! inlet 0.02 exhaust 0.03/4 bikes perfect 👌🏽
@sorbend94804 жыл бұрын
What ccm
@motormax60482 жыл бұрын
I went with 5thou outlet and 4thou inlet adjusted from cold 6thou for outlet makes them tap and sound like shit
@karltravis84193 жыл бұрын
Best video on KZbin thanks
@Nevinhattle7 ай бұрын
Do I need to drain oil first?
@dubsquad1075 Жыл бұрын
What do u mean by the line closets to the lair I have a T mark and an F mark
@JamjarMcg3 ай бұрын
Why did you set it on the f mark? I was told the t mark! T is tdc? F is for when it the fly wheel tells the bike to fire? I'm confused more? Am I as per usual over thinking it just my bike has the f and t?🙇🙇🙇
@airbornerat3 күн бұрын
did you find out F or T?
@hazr413911 жыл бұрын
means its in gear if the bikes started and the back wheel is locked, the wheel will only move once the bikes running if thats what you mean?
@Jack-ns5zc2 жыл бұрын
Will these need to be set the same for a 125
@MRONETEN Жыл бұрын
will those settings work on a YX110 mate?
@tomtom77766665 жыл бұрын
Is it the same for a demonx 170 xlr2 thanks
@QuantumMotorWorks8 жыл бұрын
thanks for the video. professional....definitely need those intake and exhaust valve clearances. Thanks!
@motormax60482 жыл бұрын
Don’t adjust them to fire on the flywheel u want to set them at top dead centre
@benhelmuth91298 жыл бұрын
This backing track is SICK!!!
@gamercat70048 жыл бұрын
hello my pitbike has a problem with a oil leak on my spark plug tip inside it shuts down while riding and downshift a gear and I think it shouldn't be doing that it. would be great if u can help me with this I haven't ridden it for a long time
@bradleymilton937226 күн бұрын
Can't seem to do it very hard to get to i got all mud droppigndown into it
@henrychuong269910 жыл бұрын
My fly wheel marking doesn't match the marking on the cam sprocket. help?!
@dasiliahuyler66847 жыл бұрын
Hey my car engine is running lil rough/Shaking n turning off and making a tapping noise do u think it could be my tappets that's making it run rough n turn off
@cricketol4 жыл бұрын
if you dont set them right can there be some popping ?
@Mr10usdad2 жыл бұрын
What if the cam is lined up but the flywheel is not?
@joeythomas13732 жыл бұрын
Then your timing is out
@deano38610 жыл бұрын
would this stop a pitbike from starting?
@lespaulplayer233 жыл бұрын
Sounds like a dumb novice question but when you are lining up the marks on the flywheel and the casing, which mark on the flywheel do you line up as there are several including a "T" and an "F" along with a few other marks. I'm new to all this and just want to broaden my knowledge. Thanks 😁👍🏼
@maxer16943 жыл бұрын
T
@alexanderclifton33856 ай бұрын
Ignore what he said line it up with the t
@Y0UP42 жыл бұрын
is this a yx 140cc engine?
@henrychuong269911 жыл бұрын
my cam sprocket and flywheel don't line up together, if the flywheel is aligned with the engine marking then the cam isn't and vice versa. is this a problem, if so how do i fix it?
@jameshalford46993 жыл бұрын
Did u solve it
@odegardracing8 жыл бұрын
i have a ssr110 would the work the same way you did yours
@SamiAnderson9 жыл бұрын
good work on the vid and thanks for sharing for the rest of us mate.
@mtbridingog90837 жыл бұрын
Can i use the same measurements in the fillers you used im saying can i used the same 1s you used in this video
@mtbridingog90837 жыл бұрын
I have a 125cc pitbike engine
@waiguolaoshi72318 жыл бұрын
Thank you from UStralia brother
@Dirtbikeboy55711 жыл бұрын
What does setting the timing mean does it have to do with the idleing ir the bike
@ulysees085 жыл бұрын
Matching the rotation of the crank/movement of pistons to the valve movement. The tappet clearance is to allow for heat expansion.
@robertlongley6115 Жыл бұрын
When and how do you know if they need adjusted
@RUBITOFF6 жыл бұрын
Will this be the same on 125 lit bike
@LSSWAPIT19787 жыл бұрын
Was that motor a piranha 140?
@np21858 жыл бұрын
Excellent video! Very well done and very helpful!
@dubsquad1075 Жыл бұрын
I have 4 lines on my fly wheel I have 2 unmarked 1 with F and 1 with T in that order anyone know which one I line up with the fly wheel marker
@mizrrainbernal46010 жыл бұрын
I have a ssr 125 by chance do you know the valve clearence
@AndreaPaesetti4 жыл бұрын
Which torque you’re using to close valve cover and flywheel cover?
@dazb33493 жыл бұрын
180nm 😄
@danielkerr41003 жыл бұрын
just tighten it until you cant lmfao
@deancottrell39789 жыл бұрын
Hi guys I was just wondering if you could do a video on how to install a quarter twist throttle?
@speedtoast11 жыл бұрын
Hi do you know if its the same for yx160 motor? Great vid
@BadPanda510 жыл бұрын
What is the song called?
@jamiewhitfield449811 жыл бұрын
Thank you very much very helpful some idiot had totally set them well wrong before I got the bike.
@karlshirley14059 жыл бұрын
Hi i have a 110cc semi auto pitbike have changed the piston and rings has got spark but won't run any ideas to try
@user-dc9qb9oh5x9 жыл бұрын
Have you tested for spark by putting in against the engine?
@JondavKTM9 жыл бұрын
Blocked pilot jet? Clean carb out to start with. Check idle speed adjustment and air/fuel mixture screw. Turn it all way in till very lightly seats an then come back out 1.5 or 2 turns, the bike will now run to then be able to adjust precisely by listening to the engine.
@toddmiller19339 жыл бұрын
Hi can you tell me the tappet clearance for a demon x 160 please
@Yama-kid1872 жыл бұрын
Please do a video on how to set your carb up and adjust the airflow/idle screws. Can't find a decent video to explain it properly. More maintenance videos PLEASE
@high_lyfe85463 жыл бұрын
Anyone know how to set the cam mines popped out? Do I gave to adjust the tappets to install cam back in
@Rubensolanogo9 жыл бұрын
does someone know where to found the AGB 29 user manual? I need to regulates the tappets but I don't have the necessary specifications...
@qureshiautosofficial7 жыл бұрын
Ruben Solano give me manual on my email nabeelahme0786@gmail.com
@omarmontana19693 жыл бұрын
i need a orion agb 37 crf1 manual mate
@static200108 жыл бұрын
U know where I can get part for my pitbike. I have a 125cc apollo
@zahidimoad468910 жыл бұрын
can I use 0.1 et 0.5 for dirt bike 125cc help pleazzzzzzzzz
@toddmiller19339 жыл бұрын
Hi can you please help me with my demon 160x tappet clearance I need for it plz :)
@LifeOnTheRoadNoFixedAbode5 жыл бұрын
could really do with the same sticker set thats on this bike for my crf70 demon x d link 125 and i cant find them anywhere , could you point me in the right direction please, would be very much appreciated
@alexscott5990 Жыл бұрын
There is no crf70 dlink
@asapferbs88133 жыл бұрын
Yo this video help a lot. Thanks !
@wolverhamptonbiker21328 жыл бұрын
damn thats a clean bike. well looked after
@gavinmcvey81774 жыл бұрын
Mate that's a demo bike they sell everything you need to build your own bike from ground up 🇬🇧🇬🇧
@Dav375589 ай бұрын
Can be done with the gear lever still on just done it push it down out of the way
@parlixsoul53317 жыл бұрын
how did you make that stand?
@spyropyro31595 жыл бұрын
My manual for my ycf sp2 150cc says 0.10 on both intake and exhaust??
@ernstl56825 жыл бұрын
Then do so if its in the manual just do it
@mtbridingog90837 жыл бұрын
my bike has a lost of power the other day i was riding in 3 rd and she tried to lock up and theni shifted into 4th and she cut off im not sure why i changed the oil out but it was brand new and i refilled with newer oil and still had the same problem the bike smokes like a 2 stroke and its a 4 stroke it wont reach full not even half rpms and i changed the spark plug because it was black but im gonna take it apart maybe today to see whats up with it because she has never acted this way its an 4 month old bike and she just started acting like this yesterday
@jimmywhitlow71744 жыл бұрын
It might have too much oil in it or it needs new rings.
@mtbridingog90834 жыл бұрын
@@jimmywhitlow7174 it was the stupid timing chain ..
@connorwilson80789 ай бұрын
Gasket failure gaskets are cheap, could be piston ring , cheap fix 😊
@bullionbouncer50808 жыл бұрын
I have a taotao 110 semi auto I know it's not the best bike but does anyone know anything about them and what brand parts I can buy or if its almost the same as all the rest
@dangerousyvette99168 жыл бұрын
I just bought the same bike nd need help
@bullionbouncer50808 жыл бұрын
+Dangerous Yvette what issues are you having with yours
@636moudy4 жыл бұрын
Very professional video with great advice, cheers mate!
@dannyblack87044 жыл бұрын
My vavles are too tight can not even put feeler underneath. Help !!!
@sylvainitsjustsyl45493 жыл бұрын
Well you got to open them first so you can get the feelergauges in and then you tighten the adjustment,🤦♂️just use your common sense man
@Morcego5387 жыл бұрын
wht is the valve clerance for my pitboke terra-moto 125cc? does this measurements fit all pit bike cc??
@jameshalford46993 жыл бұрын
Did u ever find out mate
@Morcego5383 жыл бұрын
No, I ended up not tuning the valves the bike is waiting for new parts, but wen I do I will come back and tell you. You own a terra-moto pit bike too?
@jameshalford46993 жыл бұрын
@@Morcego538 i own a kxd125 but i tuned the valves to .004 .006 like stated in this video but its doesnt sound right, but it ran fine no issues so i upgraded my carb from pz19 to the 26mm one and now it runs terrible so iv ordered another pz19 brand new carb
@Morcego5383 жыл бұрын
@@jameshalford4699 Maybe a 26 mm carb is to big for yours to much air intake, but I now that wen you install a bigger carb you need to change the jet screw to a bigger one, and install a bigger filter too, to let more air intake and more gas, mine is running on a mikuni 24 mm it’s the one that came from stock with her and an airfilter that looks like a UNI filter but I’m not sure if it is really a UNI, and it works really good alot of power, and makes a really good sound. There are carburetor kits that come with all this parts you need to change, the jet and all that.
@jameshalford46993 жыл бұрын
@@Morcego538 i wasnt bothered about power mate im happy with it standard as i only use it for stunting in the car park i needed a new air filter so it was only like a extra £10 for a bigger carb so i thought id try it so i jusy ordered another pz19 which is the standard i beleive
@graveysnipes3508 жыл бұрын
What do I set a 125cc pit pro tappets tk
@TheJameshemsley9 жыл бұрын
i have a 150cc chinese bike and i have no idea what the clearences need to be!?!?
@hty71678 жыл бұрын
Very inaccurate. 0.04 and 0.06 will make your motor tick like a time bomb. Always go 0.02 or 0.03 like Honda did.
@gavinmcvey81774 жыл бұрын
That engine is different than a Honda cub engines cam timing is well different stomp use the z140cam higher lobes big valves he's going on the service manual from stomp if you check out the kayo website that is the manufacturer of stomp pit bike frames stomp get yx engine manufacturer to put a w racing brand cam in to it at the factory with stiffer springs and retainers basically the engines are race engines not standard by any means his engine is second generation yx engine you have 123 generation engines different years of production mate I checked with mine and mine has f,t on the flywheel t is spot on with the timing on the flywheel and cam but it is set at what he's talking about and mine is nearly brand new aswel
@katluke Жыл бұрын
@@gavinmcvey8177 So when I set the timing do I use the F mark or the T mark on the flywheel as mine also has both markings ? Thanks for your time . 👍🏻
@shawnlibby675 Жыл бұрын
Times have changed so it depends on the company and motor design
@JonesYHF Жыл бұрын
@@katluke T
@djhewecko1238 ай бұрын
i thought that
@samirbomen60566 жыл бұрын
عمل روعة جيد صديق كيف تركب تلك القطعة لتبريد الزيت وشكرا لك كثيرا انك مبدع
@mw2freak61311 жыл бұрын
Hey guys I have a 125 Loncin pit bike and the rear caliper locked up on the disc and now it will only go backwards and then my dad thought it might need brake fluid but we put somem
@mw2freak61311 жыл бұрын
And it didn't release it and I have no rest breaks any help?
@dorusjaspers9375 жыл бұрын
Maybe there is a bolt against the brake disk i had that problem
@dgdwn6 жыл бұрын
ia ther any difrenc betven 140 and 125?
@jamieknowles46835 жыл бұрын
Theresa big differance on a 140cc to a 125 suprizingly miles more power
@undisputedattitude6610 жыл бұрын
How do I find top dead centre if I don't have a magneto?
@jamiewilson77335 жыл бұрын
undisputedattitude66 stick yer nob in exhaust
@Martybrown-kc4xg4 жыл бұрын
Haha
@benlawton54208 жыл бұрын
I do this until i feel some resistance but it still makes a ticking noise from the head but all the vids I watch of the z40 140 make the noise.
@mototommy55253 жыл бұрын
No engine is silent
@paulmenzies90672 жыл бұрын
Hi mate got a m2r 140 done a top end rebuild put it all back together new gaskets set timing as soon as I do head bolts up engine will only turn half way in both directions then have a banging sound if I undo the head bolts it spins fine any ideas.
@paulthemachinst6545 Жыл бұрын
Timing is set wrong. Valves are hitting piston.
@lachlanhorne66577 жыл бұрын
Why didn't you do it at operating temperature?
@ScarmackProductions7 жыл бұрын
Lachlan Horne Expands and contracts with heat. Doing it cold guarantees a proper measurement.
@jrmartinez94409 жыл бұрын
What kind of pit bike is that?
@judemeloni64118 жыл бұрын
+Jr Martinez demon wpb
@everthingoutdoors81814 жыл бұрын
I dent in my bike to get this fixed and it came back even worse and barely starting anyone have tips so I dont fuck it up
@johndoherty86819 жыл бұрын
hi there can i run a 125cc piston barrel on a 110cc valve head and can i use a 140 valve head on the 125 piston barrel thanks for any infio on this
@kacper35016 жыл бұрын
valve clearance in 0.10 ex 0.15 or maybe in 0.10 ex 0.10?
@amandaonderko6374 жыл бұрын
I respect the background music
@shabibajwa98165 жыл бұрын
Awesome video👍 keep it up mate
@jay72647 жыл бұрын
you do not need to remove the stator cover or cam sprocket cover either. just remove both valve covers and spark plug. then kick over the engine until one valve opens then udjust the opposite valve.
@wmurphy19796 жыл бұрын
jay7264 its very important that the bikes at tdc but u r right no need to take off cam sprocket cover just fly wheel needed also that bike must have been new and dry cause if the correct amount of oil was in it when he took off exhaust valve cover itd have pissed out
@mohammadjawadrezaee96942 жыл бұрын
Hello everyone. I have a semi-automatic clutch motorcycle, and when you handle it, sometimes the handle pedal becomes very adjective and does not go down at all. After two or three handles, it becomes normal and becomes an adjective again. If anyone has experience in this field, please Help. With the same engine
@thecrazymanfromireland6 жыл бұрын
Super video thanks for sharing
@garylowe86017 жыл бұрын
my stomp 140 has a carb problem. it runs fine up the revs but when you try an max it out it sounds like it's hitting a rev limiter and won't give more power. it's only just started doing it. any suggestions would be great. thanks.
@bigsmoke85767 жыл бұрын
Gary Lowe do you know where the ecu is. Just follow the wire up from the spark plug. Make sure they are all pluged in tight and not loose. Thats whay was wrong with mine
@christianlemonade53556 жыл бұрын
Big smoke yes that’s what’s wrong with mine I’m going to try and follow the cable to the ecu.
@H.1d0t2 жыл бұрын
I have the same problem will check that
@Martybrown-kc4xg2 жыл бұрын
What is the music
@CRUMBIKERS1210 жыл бұрын
@Dean Evs Yes it does my oil out bike just stalled when I was riding in a field and just would not start what I did to get it working back to its full potential was remove all the petrol and all of the engine oil, remove the carb and clean it out with white spirit, put the carb back together after clean and add back on to the bike, I then removed the spark plug and cleaned that with petrol and cleaned inside the hole, I then followed this guide to adjusting the tappets as shown in the video I then fitted everything back together and the bike started and went better than ever :)
@mtbridingog90838 жыл бұрын
wat is this for
@jamofalltrades95276 жыл бұрын
grate video thanks
@AusModernGaming Жыл бұрын
Perfect!
@filipkawulok43094 жыл бұрын
It's nonsense! when adjusting the valve clearances, the motor must rotate to the T position, I adjust the clearances IN 0.05mm and EX 0.05mm, when using IN 0.10mm and EX 0.15mm the valve tappets are knocking jackhammer ! I apologize for any mistakes in English I'm from the Czech Republic
@TheManCaveMetalFab2580 Жыл бұрын
Your timing mark looks like an F for firing that can be confusing because you definitely do not want to get T for timing and F for firing confused🤔
@afkgang50763 жыл бұрын
I didn't do nun of tht kust the valve if its timed its timed
@spambunny1234 жыл бұрын
This needs updating badly for your newer bikes!!!
@wibisk71757 жыл бұрын
that is honda c 100 engine. legendary engine.
@speedyboi3493 жыл бұрын
Looks like a very nice vid I never have done this myself but i have seen it and its very similar to what i saw Great vid bro🤘