Thanks for this vedeo. Looking down I see you answering lots of questions. Fair play to you mate; extremely kind of you.
@dzenan93315 ай бұрын
206 Zest 3 owner here Nice upgrade there, mate. I have that Eco mode as well (it protects battery from draining/getting dead). The radio in the 206 looks beautiful, sadly it's not available here where I live. I am wondering if I can fit one from either 307 facelift or 207 (yeah I need plug adapter for it).
@tonyblackburn15464 жыл бұрын
Hi, that was a good instructional video and showed parts that I am interested. it relates to a Pug 206cc. I need to fit a solar battery charger to keep the battery good whilst away for a long period. Can you suggest the best connection point in the interior fuse board to make a direct connection to the battery (not via ignition switch). There is a plug in the center with just large RED and Black cables, would this be a good connection site for both positive and negative using scotchlock connectors?
@jessicablacky65564 жыл бұрын
That was very helpful thank you so much 😊👍
@niko17241 Жыл бұрын
que tal, es el primer video que veo como hacer para que no se pierda el mando de crucero qué esta abajo de mi volante en mi auto, ese método me serviría para mi peugeot 207 sedan tendry 2010 1.6? mi pregunta es y si lo compraste separado o viene incluido el conector ISO o lo compraste por separado? ys tendrás el link de compra del autoestereo qué colocaste en el video y el del ISO para adaptar el conector original del auto. te agradecería tu contestación gracias un saludo 🖐🏻😎
@gergokovacs3 ай бұрын
Hi! Thanks for the video! Can you tell me that the Connects2 adapter has the ignition thing in it, or i have to make the fuse connection for that to make the head unit on-off properly? Thanks!
@Zest-City4 жыл бұрын
Thanks this is super helpful. I bought a like for like replacement for my Pug 206cc radio - so its the Clarion one you were replacing, when I swapped over; all works fine except it beeps an alarm every 30 seconds.. I assume that means I need to enter a code somewhere, but when at and where do I find the said code please?
@keithreilly97772 ай бұрын
Whats the layout for the aftermarket wiring loom? Ie which one is earth, positive 12v ignition, 12v constant and the dashboard light?
@PJsprojects2 ай бұрын
@@keithreilly9777 Full colour code layout for the one that comes with your new radio is in the instructions and the one for the adapter is in the rear of the packaging.
@enasnirecords64283 жыл бұрын
I'm going to sound stupid but I've been looking all night and I've finally given up, I have a 2002 beetle I want to install a 7 inch touchscreen but as you know that won't fit is there anything I can do I have looked for an aftermarket dashboard but it seems love for the beetle has died
@danielnoble59554 жыл бұрын
Pj there is a extra set of wire connectors in the original wire loom its sectioned into 3 colours blue (which is wired) green and yellow and blank but there is only 2 sets to plug into the adaptor (white and black) i have placed the black and white connectors into the adaptor but the radio is not coming on
@pierroskontogiannis29294 жыл бұрын
Hi.. I changed my car radio but i want to tell which one one of the adapter i have to order..
@emzed60903 жыл бұрын
Hi can i get away with not adding the switched live to the fusebox ie run it off just the adaptor. I have and the problem im having is that it comes on sometimes and goes off when ot feels like. Its totally mood based. I am wondering if its a faulty adaptor or that i need a switched live,many thanks.
@thwizzleNL3 жыл бұрын
Nice video but I have a question. There is a 4 digit code to make OEM radio's work. What if you want to replace and aftermarker radio with an OEM, where can you get the code to make it work again?
@fakhruddinayam71305 жыл бұрын
I have got peugeot 206+ 2009 dont have any idea how to change my radio also with the same steering control 🤔
@patsyc474 жыл бұрын
In my previous Peugeot Halfords fitted a BT radio (Kenwood) and I lost most of the info that comes up on the screen above the radio. Was this their mistake or is the same likely to happen? I’ve got an identical 206cc 94 as your demo. Thanks.
@PJsprojects4 жыл бұрын
It's possible to get a display adapter that would make your original display work with an aftermarket radio but these are pretty expensive so most people don't bother. Halfords did nothing wrong it's just the way it is on certain cars with a remote radio display.
@billmattholie11004 жыл бұрын
This is a really annoying part of Peugeot radio change. Mine is stuck on date and time but would prefer temp and time displayed. :/
@anthonyleonard91524 жыл бұрын
Hi mate, wondering if you could help me, I have a 2003 citroen C5, I've put an ignition Live to the cigarette lighter on a double fuse connector all works as you said but once you turn the car off and leave it for about ten minutes, you lose the time, you don't lose the preset FM channels or where the cd was upto. But it does go on to DAB and you have to press the button to get back to cd or FM. I have tried putting red to yellow and yellow to red and that just immediately loses the time the second you turn the key off. It's on a Pioneer DEH-S720DAB Car Stereo. Any help would be really appreciated. I don't know if I should move the inline fuse to another ignition Live or whether I need to get the iso adapter. Thanks Anthony.
@alirezakhosravani22453 жыл бұрын
hi is there any way to make the car display work with aftermarket head unit? i have a JVC X462BT
@joienegru Жыл бұрын
I dont get it. Why can't I just yank the old thing out, buy the new thing and stick the antena and the 2 connectors in it and be done with it?
@PJsprojects Жыл бұрын
You could but Pugs have a ignition off delay.
@KronenbourgLetsPlaysandReviews2 жыл бұрын
Hi, I have a steering wheel control but I never use it. Do I still have to buy the extras to install the actual stereo? Just a bit wary as I have never done this before (like I'm assuming many people here), so apart from that extra antenna thing, is it a case of follwing the rest of the vid?
@donleggett94844 жыл бұрын
Ok mate great video , was very helpful on pug 2006 HDI 2006 plate Question I was going to ask is I’ve fitted. Chinese stereo with Bluetooth satnav etc. I was wondering by removing pug radio and fitting the new after market one. Would this interfere with incorrect operation of the small information screen above the radio, centre multimedia information x screen. Make it easier the one with the clock on lol. Any information would be brill. Thanks m8.
@PJsprojects4 жыл бұрын
Yes a bit. You won't be able to adjust the clock if needed.
@greekgamer4u2013 жыл бұрын
Could you explain why you did all these things with the fuse?
@ReRey Жыл бұрын
Tnx for good job
@wesleybrown15255 жыл бұрын
Hi great video, really informative. I have just bought an after-market radio for my 206 but I've also had to buy a DAB antenna. Could you tell my what the best way of installing this would be? I want to hide the wires behind the pillar but Im worried I'll break the casing as I try to pull it away. Also, how can I feed the cable behind the glove compartment? Is there a way to get to that area?
@PJsprojects5 жыл бұрын
The A trim panel is on tight fitting clips and should pop off or if your worried run the cable across the top where it meets the roof liner and then down the edge of the rubber door seal. As for the glove box your best to go under it. You should find a felt trim cover under the dashboard that unclips so you can run the cables along the bottom of the dash and then cover them up with the felt trim.
@wesleybrown15255 жыл бұрын
@@PJsprojects thanks so much. I was able to pop off the panel in the end and then it was just a case of threading the aerial down and behind the glove box. You're right it does go more under than behind. Anyway all sorted now. Thanks again!
@ixLgBizzlexi4 жыл бұрын
I wired to a fuse and keep losing the radio memory . Resetting it every time. How do I fix?
@PJsprojects4 жыл бұрын
Switch the yellow and red wires around so that red goes to yellow and yellow goes to red.
@Christfollowerr5 жыл бұрын
Hi I am looking for this cp2-uni router for my car but I cant find the one you are working with. I habe a peugeot 206cc 2006 model, could you give me a link?
@lzmadedis86232 жыл бұрын
I bought a jvc stereo for my 2001 peuegot 206 however when you increase the volume too high it cuts itself off and restarts itself any thoughts?
@COALSER2 жыл бұрын
For me the radio turns on by itself when the car is off
@gregtaylor51314 жыл бұрын
How do you set the steering wheel control adapter up to make the radio turn off with the ignition? Cheers
@milanbadi80372 ай бұрын
You got the same problem any solution for new generation?
@dbrown47745 жыл бұрын
Hi, I have just bought a Peugeot 206 2008 and I don’t know which stereos will fit the car. Do you know how I can find that out ?
@PJsprojects5 жыл бұрын
Any radio that is a 'Single din' size will fit. You can see in a shop that the majority are this size and the bigger ones are double din,these will not fit as they are twice the height.
@marcustimmschwarz6830 Жыл бұрын
just fitted my new aftermarket radio and the radio won't turn off when I turn off the car... it did it with the old radio that were mounted. any ideas? :)
@PJsprojects Жыл бұрын
First make sure the radio does not self turn off after 10mins. Peugeot cars have a delay on the ignition live power feed so hence the delay. For an instant power off with ignition you will need to run another power cable from the fuse box, find a circuit that goes of with inhibition such as heater.
@PJsprojects Жыл бұрын
First make sure the radio does not self turn off after 10mins. Peugeot cars have a delay on the ignition live power feed so hence the delay. For an instant power off with ignition you will need to run another power cable from the fuse box, find a circuit that goes of with inhibition such as heater.
@fredobas36023 жыл бұрын
Can I tap the 12 volt current from my cigarette lighter, because I don't want to go close to the fuse box
@PJsprojects3 жыл бұрын
Yes just put an i line fuse between radio and cig lighter socket.
@jhondeblas66525 жыл бұрын
Mate I have got a question. I bought a din with screen and it comes with the steering wheel box but it doesn't have the adapter to connect it to the car what would I need to buy then? Have I got to buy a whole new steering wheel box adapter just to fit it or am I able to use the one that the radio has and just get an adapter for it? If so would you tell me which one I need? Thanks I hope I explained myself properly
@PJsprojects5 жыл бұрын
Most steering interface units have the cable built in like this one - www.ebay.co.uk/itm/Peugeot-206-306-Steering-Wheel-Control-Interface-Adaptor-Lead-CTSPG004-2/162509915222?hash=item25d6588456:g:2eIAAOSwblZZEeQi
@therager44012 жыл бұрын
If you don't need the steering controls can you simply use the existing harness and plug it straight into aftermarket stereo?
@12388753 Жыл бұрын
You mean the white and black plugs? For the speakers and power? Yes, I did that, and it worked fine, but like ha said in the video, the radio stays on for ca.10 minutes after you turn off the ignition :) Edit: The radio I got, came with an adapter, so it fit :)
@BenjaminUller11 ай бұрын
Does it drain the battery too much if it stays on? or does it not matter?@@12388753
@sleepyash5730 Жыл бұрын
do these boxes work on the 98-02 ones they use difrent indicators and steering wheel controls if you have them and does it still do the staying on for 10 mins thing on those ones as they have entirety different wiring and ecus
@PJsprojects Жыл бұрын
You would need one of three others, best bet is to contact a audio retailer such as Halfords (if your county then) and give them your reg number to id the correct one needed.
@sleepyash5730 Жыл бұрын
@@PJsprojects cheers i know the basics with the audio just curious cause its a older style and everyone seems to think 1998-09 but it's essentially 02-09 with that style it's a nightmare to find bits for
@ashleywhite43594 жыл бұрын
I have an issue that when the ignition is turned off and the radio turns off, it loses all of the saved settings. I am guessing it's something to do with constant power supply. Any suggestions? It is a Sony stereo
@PJsprojects4 жыл бұрын
You need to swap the yellow and red wires around so that red goes to yellow and yellow goes to red. Most aftermarket radios have a couple of bullet plugs in those wire to let you switch them around.
@ashleywhite43594 жыл бұрын
@@PJsprojects I have tried this but both the red and the yellow wire which connect to the stereo are connected to a single wire so it makes no difference? Is there a "constant" 12v supply on the fuse box? Then maybe I could run a spur from that
@magicbeanstalk1014 жыл бұрын
@@PJsprojects I spent quite a while trying to get the two wires out of the iso harness without luck. Is there a trick? There is a small yellow lock piece of nylon but even with that out it didn't make a difference. The 'normal' leads are fairly easy.
@GrandBlackCoin4 жыл бұрын
Could you possibly put the links of the things required to do this?
Anyone have a link to the control box thing... not finding anything while searching for it, looking for it to fit a 2005 xsara picasso, so this exact one might be worth a shot.
@GrandBlackCoin4 жыл бұрын
My adapter keeps flashing green, does that mean it’s not working?
@DankPunch6 жыл бұрын
I am thinking of changing my 2003 206cc's stereo but i have heard that the multi-function display in the car will stop showing relevant information. Is that something to be worried about?
@PJsprojects6 жыл бұрын
Yes the display will not show the radio station and a couple of other bits,but the new radio will have a display of it's own.
@DankPunch6 жыл бұрын
Thanks for the information! Great video!
@Belgsken0016 жыл бұрын
So even with this adapter the info will not be displayed on the display ? @@PJsprojects
@ramazangemici37945 жыл бұрын
@@Belgsken001 I think, even the adapter doesn't show the info in the multiscreen
@tomh74618 ай бұрын
can this be installed without the steering harness?
@PJsprojects8 ай бұрын
Yes 👍🏻
@ivar40262 жыл бұрын
Hi! Can someone help me with my aftermarket radio? I plugged all the cables, but when i turned the car off and get my keys out, the next time when i start the car again all the settings of the radio are gone. Seems one of the 12v cables is on the wrong spot in the cable? Thx guys!
@PJsprojects2 жыл бұрын
Swap the red and yellow cables over so that red goes to yellow and yellow goes to red.
@ivar40262 жыл бұрын
@@PJsprojects I tried this already. Didnt work?
@symonlee81124 жыл бұрын
I got starting problem with peugeot 206 but this problem started when someone broke my car and steal my radio,the following day I put my the key on ignition to start the car but the car won't start up to now.I believe someone out there can help my problem
@PJsprojects4 жыл бұрын
Could be damage from them ripping the radio out but first thing to try is the anti theft ignition fuse which should be a yellow 20amp,refer to the cars owners manual as to which fuse it is because they can vary depending on spec and country of sale.
@ashim2215 жыл бұрын
Hi PJ, I am trying to use steering wheel control, so do you mean I do not have to do anything with the fuse?
@PJsprojects5 жыл бұрын
No nothing with the fuse but you will need a wiring harness adaptor that has a steering control interface built in.
@jackbrown35104 жыл бұрын
What is the fuse called? I can’t find a doubler socket anywhere
@PJsprojects4 жыл бұрын
It's called a fuse spur. Like the example below - www.ebay.co.uk/itm/2-x-Add-A-Circuit-Piggy-Back-Fuse-Tap-Mini-Blade-Fuse-Holder-ATM-ATP-12V/262247697355?hash=item3d0f2e4bcb:g:vpIAAOSwd4tT8HMh
@gasworkstaranaki42604 жыл бұрын
Hi, fitted a new head unit to my '07 206 GTI today, as per your video, working fine, thanks. While in behind the head unit I found what looks like a very small cooling fan, with it removed there's a relay that keeps turning on and off constantly (without key it), did it have one on the car you worked on or have you seen one at all? Plugged it back in and relay stopped. Just curious.
@benjaminmartinussen23884 жыл бұрын
If there isn't a audio steering controls do it have to be activated by a tester?
@PJsprojects4 жыл бұрын
So are you looking at adding a steering controls? if so and you have added the oem stalk then yes the ecu will need those switched on.
@Michael-dk4yf5 жыл бұрын
Can you please link the fuse spure you used?
@Uldbard992 жыл бұрын
How much this adapter cost ? Nice video men ! :)
@rebeccagould35855 жыл бұрын
Hi, very helpful video. I just have one question. We are installing a Sony universal unit. She turns on without the adaptor but isn't turning off with the ignition switch. I read somewhere about it being to do with the multiplex system (it's a peugeot 206 2005 model) and I'm wondering if it's something to do with this? Or maybe we need to attach the yellow wire to the red (which it suggests in the manual). Thanks
@PJsprojects5 жыл бұрын
You will find the radio does in fact turn off after a few mins of the ignition key being removed. If you want it to go off as soon as the key is removed then you will need to take the radios red wire to the cars fuse box and connect it to a switched live by either soldering to the correct wire at the rear of the fuse box or use a plug in fuse spur to double up on which ever fuse you use.
@emzed60903 жыл бұрын
@@PJsprojectsHi mate does it drain the battery too much by not having a switched live. just wondering is it worth all the trouble cant it be left out lol.
@BenjaminUller11 ай бұрын
I want to know this too!!! @@emzed6090
@Satwinderr6 жыл бұрын
I'm watching this because I want to get a 206 but the only problem really is the outdated radio
@zerkorj5 жыл бұрын
Satwinder same hehe
@pascal1888-5 жыл бұрын
Hey man, any advice on where to get the cables etcetera?
@PJsprojects5 жыл бұрын
Loads of places on Ebay sell them or Amazon, very popular car so most car shops should stock the cables as well.
@CraigCuIIen5 жыл бұрын
hi mate i recently purchased a ct20ct10 ( i have a 05,206 )wiring harness and a pioneer deh150, plugged everything in and the radio wont come on. not sure what to do next or what could be the issue
@CraigCuIIen5 жыл бұрын
i havent connectd the red ignition cable to the fuse box so i presume that must be it lol
@six-ty9hu5 жыл бұрын
Do i need to disconnect the negative on the car battery before doing so?
@PJsprojects5 жыл бұрын
No need to disconnect the battery/negative.
@allard_eesinge3 жыл бұрын
Pioneer 👌🏻
@Molenbeek-qb8uc5 жыл бұрын
Sooooooooooooo much work for only changing the radio 😁😁😁😁😁 just leav you originel radio thats the best 😉😉😉😉
@TheMusicBox1124 жыл бұрын
if you're fine with having the features that came with the car then use the original, but otherwise no
@aidenwatson19985 жыл бұрын
where did you get this radio and how much was it?
@PJsprojects5 жыл бұрын
Sorry I have no idea where the radio was from or the cost as I do these sort of jobs in bulk. However the brand of radio is available from all the normal places such as Amazon,Ebay,car shops or even places like Argos.