Multi-function Clock Display Fix - Peugeot 206

Is the clock/multi-function display very dim or not illuminating at all in your Peugeot 206 from years 2002 to 2009 ?. You may only need to replace the bulbs to fix the problem. The bulbs are 12 volt, 1.2 watt 286 wedge type bulbs. It is possible to replace the bulbs without having to disconnect the wiring and fully remove the unit, but it’s a lot more difficult. Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2021
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@SergeantQuackersThe2nd]

Didn't had to replace the Bulbs thankfully but had to replace the Entire Unit which this video was extremely helpful. Now I know how to do that and disconnect the Battery. Thanks for the Good Video!

[@screwsnutsandbolts]

You're welcome !

[@danalvesDR]

Great video, thank you so much! In my case the display crystals seem to have gone bad but I’ll try to change the bulbs first, if it doesn't work now I know how to change the unit! Thank you!

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@LilliSeahorse]

Thanks so much for this clear video.

[@screwsnutsandbolts]

You're very welcome!

[@squeaksvids5886]

Thanks for making this video. Two of the bulbs had gone on mine, changed all three after seeing how to do it thanks to you. 👍🏻👍🏻

[@screwsnutsandbolts]

Glad it helped ! :)

[@markwilliams2830]

Nice little Video and thanks for sharing.Noticed that you didn't "hire" the Seagulls for background music this time!Must have been a calm day for this Vid! M

[@screwsnutsandbolts]

Thanks lol :)

[@oujee1988]

My display was dim and new bulbs didnt helped, now i got new display but will the new unit need codings? Cant get further for clock settings, can car washing hurt radio system, because after that problems started?

[@sasatrajkovic7771]

Thanks very much for video and help me

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@antsfur]

Good video i have to do that to mine, thanks

[@screwsnutsandbolts]

Thanks ! :)

[@ronaldonascimentorocha9769]

Show! Obrigado!

[@screwsnutsandbolts]

Thanks for watching !

[@danielntsheke4155]

Thank you very much, this helped me a lot.

[@screwsnutsandbolts]

Glad it helped!

[@tonimel4226]

Tnx bro 😊

[@screwsnutsandbolts]

You're welcome !

[@omaromar-lg3yu]

It work I did it thankx

[@screwsnutsandbolts]

You're welcome!

[@Tiago_Ferrari]

hello, do you know if this fixes the issue when the display doesn't show a part of one number, its like #1:13 ( "#" is incomplete number ). Also, thank you for doing this video!

[@screwsnutsandbolts]

That sounds more like a faulty display unit. I don't think this will fix it

[@ahmetuveys]

Hello, thanks for video, my clock resets time and date everytime I power on the car , what's the reason could be ?

[@screwsnutsandbolts]

You're welcome. Is the car the battery old ?. That issue can be a symptom of the battery starting to fail and causing the voltage to drop too low when starting the engine, which can reset the clock display

[@ahmetuveys]

@@screwsnutsandbolts yes it's old, thank you

[@malakaicornew2472]

Do you have a link to where i can buy the bulb?

[@screwsnutsandbolts]

You can buy them on Ebay: www.ebay.ie/itm/381385787628?hash=item58cc5d48ec:g:g3UAAOxyyghQ8~WS

[@olebendtsen6117]

Autodoc/autouncle

[@ereneren1860]

It broke when I took it out

[@empoweredq]

rip

[@olebendtsen6117]

No need to unscrew the minus on the battery, when the plus has an easy snap on

[@JayKayX71]

This is a bad idea, do not do this! The negative of a battery is connected to ground/chassis meaning if that positive you disconnected touches a metal part of the car you could damage some electronics

[@paulpaul9914]

​​@@JayKayX71 If the disconnected positive battery lead is the only lead connected to the battery then it's not possible for anything bad to happen after it's disconnected. I usually disconnect both negative & positive when working on the car though.