Plate Carriers (Condor Sentry► Crye Precision► AR500 Armor)

We picked 3 of the best and most popular plate carriers that you'll see in the gym and on in the field and weighed out the pros and cons.
Which would you choose?
TWITCH ►► / toddcruz
TWITTER ►► / itztcruz
-----------------------------------------------------------------------------------
Plate Carriers:
Rogue Condor Sentry ►► shorturl.at/dotuQ
Cry Presicion JPC 2.0 ►► shorturl.at/bnqX1
AR500 Armor ►► shorturl.at/cgAG3
Plates:
Hard Rifle Plates ►► shorturl.at/clvCJ
Rogue Plates ►► shorturl.at/ctEHX
AR500 Plates ►► shorturl.at/uJP49
-----------------------------------------------------------------------------------

[@TonyB851]

Great review. It might be equally if not moreso geared towards working out, but your points are all more than valid for actual use.

[@Insight_Gaming]

I defiantly was geared to working out yes. I wanted to do more about protection but that is not my forte. I appreciate your feedback though!

[@ed209inCA]

You can remove the cummerbund on the Tetsudo and just use the straps, or you can remove the straps (They're attached with velcro strips at the edge of the plate carrier) and just use the cummerbund. I prefer it without the cummerbund and keep with a minimal load (3 mags on the chest, TQ holder on the shoulder strap, low profile pouch on the back) for fast deployment.

[@ChefMeetsWood]

anyone else distracted by Todds hairline? Good show, anyhow. great info

[@Daniel-bm5be]

Same thought

[@Insight_Gaming]

There's not much of a hairline to speak of TBH lol Male pattern baldness is taking its effect and I am doing my best to combat it! One day I will shave it all off lol but till then I guess I'll keep some of ya distracted lol.

[@ChefMeetsWood]

Todd Ryan I’m still watching, Bro

[@therealandrewcano]

The Rock

[@alant5757]

I thought he was wearing a beanie cap...?

[@COMET_C01]

Awesome take on the three different plate carriers. Great video and btw (just a suggestion) another great option for shoulder pads is the qore performance ice vents

[@JeffReitz]

Just found your video. I have been using an AR500 Armor Testudo Gen2 Plate Carrier for a few weeks now. I am 6'2" and 265lbs for comparison. I got it just for rucking so the thick padding was nice for carrying the weight. I did remove the side buckles after getting my side plates as they pushed in on my ribs and much more comfortable with only the cummerbund. Main plates: 8.75lbs NorthGym 3D Weight Plates Side plates: 3lbs each CATI Armor I also added a Condor 3L Oasis Hydration Carrier for the warm weather here in California. For the last week I used my buddies 13.75lbs plates. Big difference was that they are flat so at first I felt the pressure on my chest, but otherwise the additional 10lbs wasn't really noticeable. Thanks for the review. USAF Veteran here.

[@Insight_Gaming]

Sounds like you have your vest for a similar reason I got mine. I like using it for rucking as well. We do a veterans ruck every November usually takes a few hours. I want a new vest too and I think AR500 is what I'm going to go with in the future. Yeah I thought the flat plates were odd at first too but still nice.

[@JeffReitz]

@@Insight_Gaming I got into rucking from going out walking with Team RWB veterans organization and there were a mix of members with vests and packs on so I started researching and decided on the vest. I have been happy with my gear so far.

[@JeffReitz]

@@Insight_Gaming Also, if you are going with AR500 you might want to check the Veritas. It's same top of the line like Testudo, but made to fit smaller.

[@Token_Black_Guy]

U went the same route I did I took off the buckles and kept the cummberband

[@jasonjosephdoubleday]

Immediately recognized HCHS. Small world. Thank you.

[@Shultzchet]

I've been doing research because I'm looking to buy one (wich is also why I'm watching this video) and I was looking at the testudo, and one of the reasons I am looking towards it more than any of the others is that if you are using the cummerbund you can remove the straps and buckles, or you can go the other way around and remove the cummerbund and just use the straps.

[@MFinGonzo]

The Tetsudo is meant for bigger dudes btw there are other smaller vests for people your size. You picked the biggest vest they had

[@gilmoregibson9184]

What vest type do you prefer for working out? Minimalist or full body with side armor pockets?

[@commonsense1825]

That Condor plate carrier Is NOT a Rogue product. Rogue just sells it on their site. Just an FYI.

[@Insight_Gaming]

I would have never known that unless you told me lol. Sold on their site with their name punched in the middle haha

[@SaltyFarm]

The Testudo does not come w/ mag pouches or sidearm holster. They are sold on the AR500 site but not included. I used the coupon code 'offensive' and got an extra 20% off the "Black November" sale. If you're patient most of their stuff goes on sale at one time or another. I don't remember exactly what I paid but I got the gen 2 Testudo w/ level 3 curved plates for under $200 shipped. Lead time was 4-5 weeks but mine actually shipped right around 3 weeks. Haven't been shot so I can't really tell you about performance but overall I am pleased w/ my carrier.

[@Insight_Gaming]

It was a part of the fully loaded package as I recall at the time of the video being shot. So they did come with this particular bundle.

[@c_mac7773]

AR 500 put different packages together all the time that include different types of plates and accessories. That constantly changes.

[@aaronbenzon2224]

I am a similar build to you. What size did you go with in the Crye? Large?

[@hvyduty1220]

Very good info coverage

[@Insight_Gaming]

Appreciate it man!

[@freedomrangerphillips9990]

I just ordered the testudo lite, it does look big, I’m 6ft 155 on heavy day, hope it fits

[@Insight_Gaming]

Just looked it up. Looks like a solid vest! When you get it, let me know how it fits and what you like about it. Who knows. Might do another vest review in a couple years lol

[@Esteban_Explores]

Great video bro 🤙🏻

[@Insight_Gaming]

Thanks man! I really appreciate it!

[@briandreiling6944]

Not “tes-tee-doh”, it’s “tes-too-doh”. 👍🏻

[@Kgoutdoor]

What ceramic plates do you recommend?

[@ryanjacobsen9557]

Shellback also makes awesime carriers very very comfortable no fatige after hours and hours of wearing them

[@Insight_Gaming]

I'll have to look them up! Love the name haha

[@ryanjacobsen9557]

@@Insight_Gaming they are super comfy and I'm pretty hard on my gear and it seems to hold up really well

[@dorianleclair7390]

Good choice for a handgun. I have the same pistol. XDs are great handguns.

[@Insight_Gaming]

Haha thanks man. Im def a fan of them as well. It was my first handgun and I love it. Tons or practice firing it and I love it.

[@WaysOfTheWarrior]

correct me if im wrong but your gun does not look like a full size gun it looks like a compact, which is probably why it looks way too small for the pistol holster.

[@Insight_Gaming]

Upon seeing your comment I looked into it further and my handgun is a compact. However, I will still stand by my statement that I wouldn't want an attachment on my chest. IT was a little convoluted to adjust and would take some major breaking in before it would be practical and reliable. Just my opinion though! =)

[@JK-dh9sz]

What's the USAF currently using as far as a carrier and are they using the same ceramic plates as the army? Afsc-811X0.

[@Insight_Gaming]

The only info I have to go off of is what my friend uses. It was his JPC plate carrier I was reviewing and yes, to my knowledge the AF is using ceramic plates.

[@ChargeViking2222]

Does anyone use their vest for both endurance and military training? Which best is best for that?

[@Insight_Gaming]

a ton of people use them for physical training as well as body armor. It just depends on whether or not you're okay with the extra wear and tear on the vest. I would not recommend the Condor for both. Either the Crye or the Tustedo from what Ive seen can handle both physical training as well as carry items for shooting training. IMO. Hope this helps.

[@chrisgodfrey2846]

The Testudo is definitely a chonky boy, I like it but thinking about changing to the Cerberus from Guard Dog. That comes with a backpack and has the sides like the CRYE and padded shoulders like the other 2 on this video

[@Nahhmah]

I'm looking for a plate carrier that is made in the USA. So far I found Crye and AWS. Anyone else can help with more manufacturers?? TY!

[@neetocracy]

Check out ace link armor I believe they are made in California

[@Insight_Gaming]

@@neetocracy Thank you for steering Will in the right direction. You are very kind to do that!

[@michaelanderson548]

Haley Strategic used to make plate carriers in the USA. I don't know if they're still around though.

[@CapnHilts]

That's a slick intro

[@Insight_Gaming]

Much appreciated, friend! I was very meticulous with its design and animation =)

[@teshukia]

You use them for work outs or life saving situations

[@Insight_Gaming]

I use specifically for workouts. However my friends use for both and recommend the testudo or the cry precision.

[@TheGoldMind_]

Keep it up brother

[@Insight_Gaming]

I appreciate it!

[@Trustee-of-The-Most-High]

Quite good info ty

[@Insight_Gaming]

Glad it was helpful!

[@pacdevil]

Weight on the Ar500 Plate Carrier with plates?

[@Insight_Gaming]

Roughly 11 lbs. Build for protection rather than weight training. However, thats just with plates. If you load magazine's, side plated and a handgun in the chest holster. The weight can really grow. Weight can be quite variable. I hope this helps!

[@AlexanderEddy]

What size JPC was that?

[@LiftedDove]

Nice video keep it up

[@tommackey943]

What did you do in the USAF, i just ordered the condor sentry

[@Insight_Gaming]

Was a crew chief, then fitness specialist and currently a recruiter. Bout done with this job now actually!

[@kimuradon]

Lots of steel plates getting grabbed up by first time buyers. I am curious if they have seen what happens when the rounds hit the plate, coated or not. Hopefully you don't bleed out from the leg wounds created by the fragging. Get ceramic/poly plates.

[@Insight_Gaming]

I was actually been considering shooting my plate for a video hahaha but I don't exactly make the kind of cash from content creation to justify destroying my stuff hahaha but still might do it.

[@kimuradon]

It's something to consider. When the round hits the steel it fragments and it sprays all over in the case of steel only plates, depending on the carrier. Some carriers kinda trap the copper and lead pieces. But if you have a high velocity round and a steel plate those fragments make that 90 degree turn on impact. And your limbs, hands and neck/face catch some of those metal shards. Just look at the cut line under a steel target next time you shoot. If you run steel plates for budget concerns, buy at least four TQ's. One for each limb. If you want to limit the chance of these shrapnel wounds buy the modern poly plates and the best carrier you can afford.

[@ryanjacobsen9557]

The steel plates are super super bad about that even with the coating on it you tend to get some pieces that still Escape I've seen it happen also even with some of the Ceramics pieces of the ceramic as well as the round if it's a super soft round some of the trunks are big enough to be lethal majority of the time it only goes in you maybe a quarter of an inch or so the bad part is is that when you get around that is shot at a hard angle it will almost skip off of it and if it's if you're leaned back at all it will actually hit the plate and Skip up and catch you in the bottom of the head area and still have lethal capability

[@Insight_Gaming]

@@ryanjacobsen9557 That a lot of good information my man! Thank you for sharing that and something I will take into consideration if I end up doing a part three on vests!

[@Sheild_against_the_wicked556]

When it comes to AR500 steel plates, you're good to go as long as you get the build up coating. Plenty of tests showing this. Just select the option they have for more coating and you'll be protected from spalling.

[@jason158]

What is the lighted tile thing on your wall and where can I get one?

[@Insight_Gaming]

Hey! They're called Nano Leafs. I actually did a video on them which you can find on my page. Theyre has been new modles of them made since I posted my video too. You can usually get them at best buy!

[@jason158]

@@Insight_Gaming thank you for the reply. I'll check out your review.

[@evelbill1439]

Amazoon! Everything is on Amazoon! Or Wish.

[@mvp3100]

Damn thicc sergeant the beard looking out of regs

[@Insight_Gaming]

Haha, it was a covid beard. We did alot of telework for a long duration. Alas, the beard has been removed. She will be missed.

[@wolffo999]

do the thick plates fit in the Testudo?

[@Insight_Gaming]

It did fit, yes. But since the vest itself is so thick, it was not comfortable at all. Very suffocating. The plates that the testudo comes with are amazing plates so using curved ceramic isn't really necessary.

[@rickmurillo6857]

If you arent using this for the intended use and just for working out then get the cheap ones. You don't need drag handles, and reinforced stitching, etc.

[@Insight_Gaming]

Facts. Something I didn't consider when I made the videos. I tried to cover aspects just so people had an unbias look into each vest. So if people want to train in them or use them for shooting practice being loaded down.

[@chriswallace3410]

Im pretty sure that jpc is a jpc 1.0 not the 2.0

[@Insight_Gaming]

I think you're right also. I was operating on info from the friend I borrowed it from lol

[@BakaDeru]

Buy once, Crye once. No regrats. SPC is the way to go

[@Insight_Gaming]

Yeah prolly my fav out of all of them!

[@thoughtsfromaidiot5928]

If you are simply using it to work out in I would get something cheap.

[@Insight_Gaming]

That's what I did haha

[@ajbutler2225]

Do you paint on that hairline

[@CorkKNIFE]

Tostitos.

[@spaz19941]

I found your channel!

[@Insight_Gaming]

My MAN! hahahahaha

[@spaz19941]

Did you ever see the finished product of the drone footage you gave me?

[@Insight_Gaming]

@@spaz19941 Uhhh I want to say yes, but I think its been a while. Or perhaps Im just remembering the footage itself haha

[@micahfrye8885]

Why do I even watch these? I start it and then remember the price and go back to my alice gear.

[@Insight_Gaming]

Yeah, it's unfortunate how some of the pricing is the make or break for some. That's why I went with the rogue condor. Otherwise, I too would get something a little more functional.

[@xxxtinguished5627]

I have plate carriers, but I still use my alice gear just as much.

[@PNWDad206]

You lost me at the Springfield XD

[@Insight_Gaming]

lol it's my first gun and I got it specifically for home defense. Don't worry. I will redeem myself in your eyes when I purchase my SCAR. haha keep it real bruh!

[@Insight_Gaming]

@Brian Weatherman I feel like it's a good handgun for sure. My friend doesn't like the grip safety feature but I don't mind it. I've been able to send rounds down chamber every time I needed it. sooo lol

[@Insight_Gaming]

@Brian Weatherman For sure! I can't wait to build my AR but I must remain disciplined for now and save. lol I appreciate the support, brother!

[@Galm276]

@@Insight_Gaming Its not a bad weapon, I"ve owned multiple XDs in various calibers, but there's a reason it's not picked for duty use.

[@bc2006]

"3 of the best" since when are condor or AR500 considered among the best plate carriers?

[@Insight_Gaming]

Its all subjective to what youre using it for my man. If you have a different opinion thats perfectly fine 🤙🏽

[@bc2006]

@@Insight_Gaming It's not at all subjective. Crye and LBT are made in America and issued to SOF units all over the world. Condor and AR500 are made in China and used by airsofters that can't afford Crye or LBT. That's like saying it's subjective on whether McDonald's is higher quality than Wagyu beef. You might like the taste of a McDouble better but you're gonna have a hard time convincing anyone that it's higher quality...

[@bc2006]

@@Insight_Gaming Also I'm wondering where you found legit JPC for $85-150, that sounds like Chinese clones. $170/plate also seems unrealistic unless you want something in the 8lb+ range. Highcom 4s17m are the cheapest plates I found that were halfway decent and they run close to $400/set with shipping.

[@Insight_Gaming]

The fact that you mentioned airsoft specifically means it's subjective. lol

[@anomilumiimulimona2924]

Point blank has entered the chat

[@WiiR3d0000]

You have a nice beard.

[@Insight_Gaming]

Had 😭😭 Military made me shave it 😪

[@ashleym7366]

If I wore my rank on a workout vest, I’d kick my own ass

[@Insight_Gaming]

Lol okay aShlEY. I'm sure you're the coolest kid in ur squadron too huh? Lol

[@ashleym7366]

@@Insight_Gaming yeah

[@Insight_Gaming]

@@ashleym7366 Happy for u

[@TheDarthCookies]

Rogue just sells the condor sentry, they have zero hand in manufacturing. The brand is of course Condor

[@ZMan0718]

Caused they’re designed to have trauma pads with steel

[@otanguma]

Tos-te-dos yum

[@DoItAllBro]

Ar500 offers a bunch of different sales year round. I got my full testudo package at ~$300

[@Insight_Gaming]

That's what my friend who let me borrow it told me. Said he got it on sale and was pretty stoked about it!

[@DoItAllBro]

@@Insight_Gaming Great budget option for those new to the body armor game or just looking for a solid budget option for fitness purposes

[@Nahhmah]

Yeah, most things made in Vietnam/Asia get lowered in price. Not the ones made in USA, brother.

[@totschopper]

The "Rothco lightweight plate carrier" is a "crye JPC clone" for $50 and is about the same quality as condor products if you're looking for a budget option

[@Insight_Gaming]

I'm going to look into that now because I really liked the way the JPC fit. It's a hell of a vest for sure. Thanks for sharing!

[@Predator42ID]

According the specs I read they only allow 6*7 side plates compared to the condors 6*8. That is the big seller for me. My brother has one and say's it is great. For me I'm just having issues finding plate carriers that fit my small athletic frame. AR500 say't their tetsudo fits someone like me yet according to a reviewer with a near identical build it didn't work and was still too large. How does one go about that?

[@MFinGonzo]

Tet-su-do lol

[@Insight_Gaming]

I cant read or write lol

[@christopheroliva6431]

Look more carefully... it’s Tes-tu-do

[@rossifumifan1]

The AR500 holster is garbage. Don't waste your time or money.

[@alexandershow8888]

🧿💚🧿

[@dalewoods7308]

Of course the chairforce don't know anything about body armor go army

[@Insight_Gaming]

This is why I didn't go into detail about ballistics or the real defense purposes of the armor. My focus was about the feel of wearing and mobility aspects so people would have an idea of that before they purchase. Thank you for your input though.

[@alwaysarmed88]

You would like this vest. Try the Ar500 Veritas

[@goon5046]

Definitely the Veritas, take off the side buckle system and run the cummerbund. On the one I had, I used Ferro Concepts elastic cummerbund and it was probably one of my favorite setups... until I got a Slickster and FCPC V5, lol. But my girl uses the Veritas now.

[@Stoney-Lawson]

you bought a plate carrier way toooooo big for you.

[@Insight_Gaming]

If you're referring to the Tustedo, I barrowed it as stated in the video.

[@addisonkempf649]

looks like your hair is spray painted.