Semi Gets Stuck In Coachella

In today's video Trent Jr takes the rotator to the Del Taco on Coachella Ca near the Loves and TA truck stop to winch out a tractor trailer that got stuck in soft sand
Thanks for watching as always LIKE, COMMENT, SUBSCRIBE, and SHARE the HECK out of this video!
►Support my channel-paypal.me/plazatowing (copy into your browser)
►Email Me Here- [e-mail]
►Send Mail Here-
Trent Butzlaff
83827 Tamarisk Street
Indio, CA 92201
►Products I Use And Support-
►Guardian Angel Light: www.guardianan...
USE MY CODE: (120CLIP) for free shipping and free universal clip
► Lemur Light: www.lemurlight...
- - - - FIND ME ON SOCIAL MEDIA BELOW!! - - - -
► INSTAGRAM → / plaza_towing
► FACEBOOK → / plazatowing
- - - - Frequently Asked Questions - - - -
Q:What camera do you use?
A: I use the Go Pro Hero 7 Black Edition primarily. Often times you will see auxillary cameras in use. Those cameras include The Go Pro Hero 6, Hero, and DJI Mavic Pro Platinum
Q: How big Is your rotator?
A: It is a 50 ton Miller Industries Vulcan 950
Q: Does the carriage slide back like Ron Pratt's?
A: No, the carriage doesn't slide back due to strict weight laws in California. The sliding carriage will make the truck to heavy in CA
Q: Why do you only have 3 winches on the rotator?
A: Comes down to weight again as stated above
Q: How many trucks Does Plaza Towing have?
A: Currently more than 30
Q: Why must the driveshaft be removed to tow a vehicle?
A: When vehicles are not running the transmission is not receiving circulating lubricant. If the driveshaft is left installed, the transmission, which is not receiving lubricant, is still spinning. This allows it to get very hot which eventually will cause major damage to the transmission. Therefore, removing the driveshaft completely eliminates the transmission from spinning. Simply leaving it in neutral is not sufficient since the transmission still spins in neutral.

[@oguincheirousa2568]

My friend I watch all your videos, very cool, but when you use this clip on the bumper again, face it up, it has two positions, you have less work, have a great day.

[@plazatowing]

Hello sir! I have a video outlining why the hooks should be faced down. This is very important! Take a look : Why I Pull Out Trucks Like I Do kzbin.info/www/bejne/n3PXgJSgq7KpbdU

[@oguincheirousa2568]

Yes of course!! Each situation, different ways to use the tools!

[@rockabillypreformancerc1639]

Brent uses the hooks facing down as when the winch puts pulling pressure on the hooks it goes through the largest surface area of the hook instead of the weaker smaller surface area of the tip of the hook it also stops the straps braking away from the hooks as it slides up when pulled on

[@woodman3651]

The next time you use your pull pins maybe use the electrical tape and wrap it over and under. Great videos!🤙

[@dandunning4409]

Nice recovery Trent. It always amazes me on how many drivers have no clue how to lock their differential in or where the switch or switches are at. If he had locked in prior to getting stuck he might have drove through there without getting stuck. Stay safe..

[@kriskass5878]

Sorry.... truck drivers should know where the differential lock and 5th wheel lock is or they should not be driving.

[@michaelshrout2820]

Did you walk back there and get you blue-handled diagonal cutter? I was almost buried in the sand.

[@plazatowing]

Yes they were put into my pocket. Thank you for watching!

[@harrisjessop1679]

Belated Happy Birthday! I wish i was 21 again, just turned 53 and if i knew all the things i know now i would have done almost everything different!!

[@maynardholmes8870]

Harris Jessop same here I started trucking just about the time the doctor told his parents it’s a boy 😂when I was his age I was still out to sea onboard a carrier no regrets other than managing funds better but on can have all the toys and money in the world and not make to 53 like you and me we are in the 5 th inning bro hope we make all 9

[@puirYorick]

Let's be clear - I know next to zilch about driving big rigs but it's pretty clear to me this client had a serious lack of knowledge about the truck he was driving - probably contributing to his getting stuck like that in the first place. More business for Plaza I guess.

[@clittle580]

He really didn’t have the diffs locked!? 🤦‍♂️ that would have been the first thing I’d have checked. Goodness.

[@texasgilley9533]

Just get some mechanics wire it’s cheap and you can reuse it over and over and over. For my diesel mechanic for doing it for 35 years do you learn to improvise

[@tc5290]

Jayzus when the trucker has to be told to use the diff-lock

[@murdock2769]

To hold your straps on your hooks take some mud flap material and cut them out the shape of a donut or first you might try slitting an X in the center of a tupperware lid. Just a couple ideas, good luck. Love your videos. PS how many thousand do I need to buy a rotator like you have?

[@zachhefner2453]

What kinda money does a simple pull out with the rotator run? $500?

[@BerlinBLR]

At least Im thinking 700ish + tax

[@AlekseiSoyunov]

Если такие деньги платить, проще отцепить прицеп, переехать на асфальт и снова зацепить.

[@bighouse1283]

Good video Trent easy money! Suggestion run the zip tie thru the loop and secure it to the pin, shouldn't slip out and your keeping it tight against the pin. 😎👍 〽️

[@CommonCanuck]

Have you considered AMsteel instead of steel cable? Would make pulling out a line much lighter.

[@zigzag77777]

Another nice job! Always keep that excitement about your family’s business. You’ve got a good thing going, treasure it. Now go give the old man a hug, thank him, and tell him you love him! Keep it simple. Another Dad watching you

[@NeonDreams7]

Del Taco strikes again!

[@adrianbaja1978]

Someone probably earn a commission in tacoshop

[@TheHarold2nd]

1 thing better than a good looking truck is the man that helps to make that truck a good looking truck.

[@Uneedhelp91]

I had a dream last night that I bought a semi truck. I work in IT....

[@Embermist69]

Career change maybe? 😁

[@vaughnbluejr5960]

Is this a private parking lot? Looks like someone would make it more stable since you've pulled out 2 now from there.

[@lindasherman9921]

Do you give Love's a kickback so they don't pave that over? (just kidding)

[@SumterWrecker]

We love your videos. Keep them coming and stay safe.

[@KB-gs8zi]

Sir Trent !!! OKS !!! More money out of the ""Love's "" Money pit for sure !!! Looks like the Driver could have gotten himself out if he knew what he was doing with his truck as they don't teach ""OFF ROADING"" at the CO. or Driving School & showed he didn't know much about driving Period !! Always ,,Great recovery & ""KEEP IT SAFE ""!!

[@plazatowing]

True! Thank you for watching!

[@roccit]

“Put things away for me” Done! And I wiped the dust off the cable too!

[@plazatowing]

why thank you! Thank you for watching!

[@georgegeorgepht]

And ......no one is going to mention the driver didn't know what interlock was position was in? He could if drove out with the interlock ........

[@sethtriggs]

Wow that sand is so soft, that has to be so strange to work in! No wonder the truck got stuck! Very good technique here.

[@oguincheirousa2568]

sorry my english I am Brasilian spiak Portugues

[@rockabillypreformancerc1639]

Yellow Pete along the fence is one you pulled outa there

[@clittle580]

Do I see an intro? Awesome!

[@robt2151]

Good to see the blue Pete in the yard - I thought you said on an earlier video that it had been decommissioned.

[@mikemclawhorn2699]

Good video. At least it wasnt a muddy mess. Keep up the good work from nc.

[@brianherron5400]

What kind of tire shine do you use.

[@georgehasler142]

Good job again is there a set price for all tow outs or does it depend on the job

[@philipmichel215]

Nice wheels! Your paint scheme is really sweet!

[@gregcurd2654]

Forget your wire cutters. Trent. I think. But like always. Cool Video. Great job

[@plazatowing]

I put them into my pocket! Must’ve happened while I wasn’t looking at them directly. Thank you for watching!

[@JSchrumm]

"I've pulled a lot of trucks out of there over the years" You crack me up 21 and sounding like father time.

[@plazatowing]

Haha! I have an old soul! Thank you for watching!

[@TWX1138]

What's your method for doing tire-shine? Every time I've had a vehicle washed by a carwash and they've done the tire-shine it ends up splattered over the side of the vehicle. I don't exactly like washing cars but reducing sidewall dry rot would be nice if I could keep the tire shine from being flung everywhere.

[@davidphillips6571]

That lot is a money maker for ya'll.

[@garywilfong4648]

When are you going to post the other videos

[@edwinschlee8374]

Another job well done. Was there anything wrong with the trailer after he started moving again?

[@marshallbarkema1677]

Why didn't he use his rotate r and lift the whole unit up in the air and lift truck to safety?

[@smrekow]

Do a rotator collab with ron pratt lol

[@anthonyrobertson1787]

Great job Trent 👍

[@nathanbrodeur]

Trent I think there should be signs around sand spots like that and say The sand you see isn't as solid as it appears if you venture in you'll be sunk if sunk call Plaza Towing to get a lifeline to safer ground

[@davidcline6309]

What did you mean the truck was in regen mode and was it the rotator or the other truck

[@plazatowing]

The rotator was in regen mode. With the new emission system the trucks have to occasionally burn off the filter therefore the truck goes into a slight high idle. Thank you for watching!

[@davidcline6309]

@@plazatowing ah ok ty for explaining

[@JacksonGuitarsPlayer03]

Real gorgeous truck 👍🏻 at the towing company I work at, we got a new 50 ton peterbilt rotator too. 550hp Cummins X15 good engine. Awesome truck. I drive the older 06 Pete 379 rotator there. It’s got a 50 ton 2015 Miller rotator on it. Awesome truck as well. That truck got a 600hp acert twin turbo caterpillar motor in it. Thing rolls coal. I love that truck. Cummins and caterpillar engines 👍🏻👍🏻. We got a 2000 t800 with a N14 Cummins in it. Awesome truck. Those motors run good. The cats take a little to start in the cold, but they got power and torque. Strong engines. I like the older motors better, but I’m really impressed by the new Cummins x15 motors in the newer trucks. It’s a good engine. Newer trucks also come with the PACCAR. I don’t like the paccar. The new X15 Cummins engines are good.

[@borisobrucicov8630]

Alright you know what I think? I think you should buy another awesome wrecker for the fleet. 😉👍

[@thomasdesmond2248]

You do know that washing a vehicle. Is the white man's rain dance. If you wash it something will happen to get it dirty. Just keep fighting the fight. Lol God bless

[@Murph9000]

You could probably get / make a good strap holder from mountain bike or motorbike inner tube. Cut into 1 inch rings, slip over hook before the strap, stretch between hook shaft and tip after strap is in place. Cheap, simple, durable, etc.

[@christopherandersen5950]

Why do u use the hooks upside down.. wouldn't it be easier to hold the straps if the hook opening were facing up..

[@samanthamartinez5503]

it is bad I hate the regen all EPA has done is coast buyers of trucks more money and repairs add some propane to diesel as it burns no leftover carbon in the air

[@mrwhiscle2853]

Hey my friend I DNT drive a truck but I love your videos watch them all the time keep up the good work bro

[@caseybhargraves3696]

My 19 Cascadia has the tow hooks facing up. I assumed they will lock in up or down.

[@Embermist69]

My first thought when I see the drag winch pulled easy, damn Ron almost never has that luck from the videos I seen of him using it.

[@jeffreymurdock8366]

Drove right by where you did this winch out on a trip to drop off some stuff in texas. I stopped at that loves and considered tacos for lunch.

[@blakeloke5586]

Another great one. Yes, I put everything back. But, I left the surgical glove in the dirt. Figured someone else can have it! Thanks for the video!

[@farmerrob385]

I see a ring on ur finger

[@bigt3623]

CDL before ur 21??

[@wickett7078]

You can get it at 18 where I live but you cannot leave the state

[@thepubliceye]

Cut up some bicycle inner tubes and just leave them on the ends of the slings.

[@arrowkart4j]

Happy belated birthday 🎂. It amazes me how clean your equipment is. That in itself is a full-time job. Keeping my Freightliner clean is a ton of work,but I'm a clean freak. Keep up the great videos, always enjoy watching you guys work. And I'm a big fan of that silver and blue Pete you have.

[@plazatowing]

I am a clean freak as well! Thank you for watching!

[@russellheaton4930]

Nice easy 1 Trent :)

[@plazatowing]

Thank you for watching!

[@ThanhTran-bz2jb]

I want to buy your car and bring it to my country to use. Do not know you are willing

[@Xillies_18s]

NOW THATS A RIG I WOULD DRIVE. THATS A BEAUTIFUL TRUCK

[@exclusivenow9363]

How much a job like this would cost does anyone know?

[@ParthPatel-ku4jr]

When you said you were going to del taco I thought you were talking about a real city or town. Lol

[@bryanball8909]

Why didn't you just grab it from back, he would gone about 10ft. And we wouldn't of wasted all that time. Probably could of used a lot smaller truck too. Just saying

[@plazatowing]

Certainly an option. The typical rule of thumb though is pull on what is stuck and in this case the tractor is what was stuck. Thank you for watching!

[@woody1320]

Happy birthday and did you get your taco lunch?

[@sandie062985]

Easy pull out GodBless you and your family.

[@RjIONAz]

DelTaco, TacoBell eguals never and a day.

[@RjIONAz]

Tow pin is faced (opening) down for a reason ...

[@michaelszweda]

awesome video love the rotator keep them coming

[@blthetube1]

12:26 That makes no sense to me at all...plus I don't understand why you don't get better lined up with the front of the truck????

[@Turbo-6]

What rear end gears do you have in Tator? 3:73 3:90 4:11? I. Engine x15?

[@desertrat8322]

Trent , nice textbook winch out !!!

[@blueboats7530]

I'm not sure I put the pull pins in the right place, you'd better check

[@DollJessi4u]

How big are your rotators?

[@bobcatsmith246]

I know you just got the rotator, have thought about getting a rotator with a side winch.

[@plazatowing]

Unfortunately that option is to heavy for California. It would be nice but I have not really found an instance where it would be more beneficial that n the drag winch or the main boom, but im sure I will. Thank you for watching!

[@R3benga]

what motor is in the rotator ?

[@Djm9393]

Send it bro! happy Saturday!

[@Dylan-kw4ol]

Good to see Roberto drive by

[@hotironforge1385]

I like the intro!

[@steveblake8766]

#993 thumbs Up

[@adrianmeredith6818]

Ur Truck Looks amazing Trent

[@plazatowing]

Why thank you. Thank you for watching!

[@alanmaennche5680]

It's good I like them 😊

[@brianchilton7328]

Why don't you on winchouts with the red or blue straps why don't you food the straps in half to shorting the strap but gan on the pulling power

[@plazatowing]

If I understand you correctly, you are saying fold the strap into 2 in the basket configuration and pull off of one hook? Although you gain the working load limit on the strap, the single pin would be your weak link. Hopefully I understood you correctly. If not feel free to reply! Also check this video out detailing why I pull out trucks like I do: Why I Pull Out Trucks Like I Do kzbin.info/www/bejne/n3PXgJSgq7KpbdU

[@huskerboy3471]

Hi

[@reganmahoney8264]

21 years old and eating at Del Taco... I am twice your age and that would destroy my insides..

[@clittle580]

Not only have I been close to stuck in that very dirt lot, but I also hauled a load for that company “Value Truck” back when I was an O/O. If I recall, they are out of Buckeye, AZ. Great video, Trent.

[@clittle580]

Small magnets would work great in that tow strap also. I think I said that once before. 😆

[@bigc8300]

Good job ole Ron Pratt would be there for 3 hrs runinn mouth sirens flashin lights Bible

[@pepaw4431]

amen

[@Jordo9088]

WHAT is regen mode???????

[@Dylan-kw4ol]

Have you ever did a daisy chain recovery before!?

[@plazatowing]

No we have not. We typically use bulldozers as. Deadmen for winching.

[@alexdarte2]

Did you get your cutters LOL

[@plazatowing]

Yes they were put in my pocket. Camera must’ve missed it. Thank you for watching!

[@ezmosco-]

U definitely made this a hell of lot more complicated than it should have been a simple tow would have sorted tgi in 6 min flat, but I suppose you need to justify your call Out charge

[@plazatowing]

Always someone...

[@scampsboytes9088]

Your opinion, but then you just had to have something to be critical about to make yourself seem important, or is it impotent?

[@pepaw4431]

@@plazatowing always an ass in th crowd somewhere that has to open theyre mouth & show how truly IGNERT they are Jr....treat it like water off a duck's back..."let it roll off"- be safe & keep 'em coming-

[@pepaw4431]

@@plazatowing always an ass out there somewhere that has to open his(or her) mouth & show just how IGNERT they are Jr--- treat it like a duck's back..."let it roll right off!" Keep 'em coming, & ya'll be safe out there!