PLC Tutorial 8 : PID Control in Programmable Logic Controller (PLC)

[@parthpatel9793]

i learn lots of things from your videos regarding to plc programming...it's very effective & helpful....sir can you please make some videos on motion control application??

[@venkateshnayak3454]

Very nice explanation sir and in your all videos explanation is very to listen and understand....

[@AutomationRevolution]

+VS NAYAK Thank you so much. please share & subscribe as much as.

[@proinfo-lr6qq]

good explanation

[@kiranchoudhari4717]

Thank sir,. For making this topic very interesting

[@chandrasvlogs520]

Sir once we install the transmitter to the liner,do we need to do any calibration for any setpoint or not,if yes how it could be done.?

[@syufrijal]

nice tutorial, PID control in PLC

[@IK-qu9hw]

How much keep proportional internal derivative time , how to know when I want to use PI or PID plz tell me?

[@eyobdagne5230]

If the operator is adjusting the valve according to the reading of the temperature gauge, can we call it an open-loop system? Ain't that A closed loop?

[@simoessmithlimakevan1803]

Hi, i understand what you mean 🙂 but technicaly the close loop is when some read device is physicaly conneted to the process. With our hands we will kill the correct précision.

[@ilhamrahmatmuharam8501]

can i connect output_PER to analog output address PLC ?

[@uttaranbhattacharya3066]

Sir, how can we make the correction faster??? I think it will be by setting P, I and D constant. How can we calculate the values for an industrial process except from hit and trial method?

[@brian6175]

8:43 My input measuring number is different from my IW64 Measuring number, how's that?

[@AutomationRevolution]

You can change input address from configuration or May be PLC model number should be different

[@kishansonagara858]

Sir, Can I make a final year project of PID regulator

[@rohitbhattacharya6948]

During commissioning, pid block stays in inactive -disable mode, dose not provide any output, and input is aslo showing 0, and tuning process is also not starting, how can I solve this issue please help

[@vineshkumarwgl8796]

how to change the input iam getting input as 0.0 and also how to change input using PLCSIM

[@AutomationRevolution]

We have already made video on how to use PLCSim & chance input. Pls check this video from our channel.

[@vineshkumarwgl8796]

@@AutomationRevolution couldn't get that video can u provide the link please

[@ramlakhanization]

Is pid configuration different in s7-300 ,s7-400 and s7-1200

[@AutomationRevolution]

In all Siemens S7 PLC PID configuration are same.

[@saurabhwalekar6494]

how to calculate the value of P,I and D? and how can i give the setpoint, the values of P I and D from HMI.?

[@muhammadzia9421]

Can u please guide us with the PID block of S7 Simatic manager 300 station.... You rock...Bravo

[@AutomationRevolution]

Thank you Sir for your complements ! I will try to make on S7 300 also.

[@muhammadzia9421]

I need a little help brother.... my question is that i know how to do basic commissioning of G120C drive with STATER, but can you please elaborate that how i can parameterize or commission multiple drives at a same time?.... Please guide me... Thanks alot for your time and consideration.

[@Sandeep0800415537]

How can we provide damping constant

[@somurwarda2355]

Please can I ask you how to get the Siemens software

[@AutomationRevolution]

All Siemens software are licensed based products. So you need to purchase software licensing. Only 21days trial can be downloaded from Siemens official website.

[@alagarsamy3914]

thank you friend.. i need to study simatic 7-300, tia so could you please refer good center... kindly please help me...

[@abidnawaz8668]

Dear Sir, Can u please make a video about Data Blocks, Function Blocks and servo &stepper motor control using tia and simatic manager

[@AutomationRevolution]

+Abid Nawaz Hi , I have made video on date block and function block. pls check other videos and for stepper motor I will make video soon.

[@abidnawaz8668]

Fine sir, Please make servo and stepper both videos also using simatic manager and tia portal.

[@darshanprajapati7328]

Nice video sir

[@Yousfani]

Software????

[@AutomationRevolution]

Siemens TIA portal

[@manjugowda69]

Can u please explain PID calculation

[@salahuddinsalu365]

do you have setup of this scada software

[@vinothkumar-yu8nr]

Tq bro 😍😍

[@jaynapindoria5328]

Hi We want to change our platform from GE Fanuc to Siemens S71200. We also want to upgrade to servo drives from pneumatic. Could you share a contact if you could organize a training on how to control several servo motors with encoder with industrial Profinet.

[@simoessmithlimakevan1803]

Drive FESTO

[@ashishpancholi488]

thank you sir

[@AJAYSINGH489]

Sir, Pls make a PID regulator video for S7- 300 PLC. Pls sir i request you.

[@AutomationRevolution]

+Ajay Singh PID Functions are same in all Siemens PLC, only tuning need to be change

[@vaibbhavgodse3702]

plz mail link of this software

[@AutomationRevolution]

This is not free software, you need to purchase from Siemens. Or you can get trial version from Siemens website.

[@denismercpanganiban9971]

@@AutomationRevolution what is this software that you used?

[@MrMARS-yk1yv]

hi is it possible to contact you per Email ?