Plywood yacht for self-construction, complete process of assembling the boat hull in 30 min DIY boat

Plywood yacht for self-construction, complete process of assembling the yacht hull in 30 min.
DIY boat.
More information about the yacht can be found on our website unikyachts.com...

[@lastaccountbannedfortalkin1449]

Brilliant lads👌 that's coming from a boat and coachbuilder in UK about to do my 5th homer build, this one my son is learning while I do it and it will be his boat but I haven't told him that yet or even told anyone that other than my missus and on here under my new profile which he doesn't know is me. I bet he sees this vid somehow though and might even read this comment. If he does I will know 🤣

[@mohamednejjari8159]

😂😂😂 welcome in morocco bro you can open a mini boat building facility here cheaply and open a youtube channel for it and i m sure moroccans and all the world will start to follow you

[@voornaam3191]

Bla bla bla. Build that yacht and shut up, please. Most annoying!

[@markkubiak8296]

It took 30 mins. to erect 1 mold. A very nice looking boat. Great video!

[@sailingavocet]

Nice work! We do all of our boatwork ourselves and are convinced that at this point our body composition ust be at least 90% fiberglass! Best of luck with your projects. Fair widns!

[@Martin-em4cu]

Dieser Kanal hat wirklich nachgelassen.

[@joserod9878]

Impresionante / perfect, I had never seen something homemade like this. Extremely nice. Video is from 9 months ago but I just got here. So Im new. 😎💙🇵🇷♥️🌎🦅

[@UNIKYACHTS]

The goal of this project was to show that amateurs, using modern technologies available to everyone, can independently build cool boats.

[@СергейНерух-й3р]

Отличная работа Сам делаю лодки знаю сколько надо труда и терпения положить

[@UNIKYACHTS]

Спасибо, я стараюсь большую часть этого труда переложить на плечи машини.

[@СергейНерух-й3р]

Чертеж сами делали или программа

[@UNIKYACHTS]

@@СергейНерух-й3р Программы чертежи делать не умеют.

[@СергейНерух-й3р]

@@UNIKYACHTS тогда может подскажите где брали чертежи

[@UNIKYACHTS]

@@СергейНерух-й3р разрабатывали.

[@7208021]

Красивая и функциональная яхта. Молодцы !

[@БьярмГипербореев]

Это же фанера намазанная эпоксидкой с дешёвым стекловолокном. За два сезона сгниёт.

[@johnryan2193]

That child is a great little worker ,he will do well .

[@HenauderTitzauf]

Great video, thanks for posting and sharing with us. Just one comment. Boat building is FUN. And building one goes faster when the” hands on hips syndrome” stops to admire the work done. Great job on the boat!

[@UNIKYACHTS]

Thanks :-)

[@madyogi6164]

Brilliant to watch! Very nice boat/yacht as well.

[@UNIKYACHTS]

Thanks

[@fallougallas7270]

Nice and clean job keep it up 👍🏾

[@h5mind373]

You wouldn't "plywood" and "yacht" belong in the same sentence, but these guys proved us wrong.

[@UNIKYACHTS]

For thousands of years, man has built boats from wood and made all the geographical discoveries on these wooden boats. That's why we didn't come up with anything new :-))

[@MiloYellowknee]

Beautiful lines! Nice work!!!

[@UNIKYACHTS]

Thank you, I try to make good modern boats available to everyone

[@ebrahimali5748]

احسنت عمل رائع.. اعطنا المزيد. .. شكرا لك من طرابلس ليبيا.

[@UNIKYACHTS]

شكرًا لك على اهتمامك بقواربنا ، سيكون هناك بالتأكيد استمرار.

[@소소한방]

Cool! I would like to try to build my own one when things around me get better. Hopefully everyone in this video is safe.. #godblessukraine

[@מיקידהן-ת9צ]

כל הכבוד מקצוענים 👍👍👍

[@UNIKYACHTS]

תודה על הדירוג

[@MootonWooton]

This video is very inspiring!

[@manaloronniejr.n.1489]

I think the production is great but the design thinking and analysis is much more incredible,,,

[@UNIKYACHTS]

Thank you for the appreciation of my humble work.

[@НатальяЗотова-ч8щ]

Приятно посмотреть, как другие работают!

[@yannmonnier4291]

Great vidoe, I m thinking to build one ... What about the boat on the water ? Any review done by journalist ?

[@UNIKYACHTS]

Hi, you can see the boat on the water at the links below, and a review of my boats can be found in the SAILING Magazine in the september issue. www.carpboats.com/portfolio/lion-550 www.yacht.de/en/special/people/interview-modern-boatbuilding-in-ukraine-in-times-of-war/

[@charlesjenkins5092]

I think it is hilarious watching the boss stand around with his hands on his hips and pointing

[@UNIKYACHTS]

Sorry, this happens sometimes. :-)))

[@ArthLud]

You don't have to watch closely to see WHO THE BOSS IS.

[@4228wolfgang]

Brilliant, Unik!

[@ThaHammieJaassee]

put the video at 1.25% speed and the song sounds amazing haha

[@Jaylp9qw]

😂

[@HikerBikerMoter]

🎶 🎵 👍

[@Ht3ddesing]

Mükemmel❤

[@UNIKYACHTS]

Övgü için teşekkürler

[@sparkeyjones6261]

My god... if I had know I could build a yacht hull in 30 minutes, I would have done it a long time ago.

[@UNIKYACHTS]

In order to build a yacht in 30 minutes, you need to move very quickly :-)))

[@jasonb4350]

It took like 3 months, with all all that man power they are slow as hell in my opinion

[@dustycrophopper2743]

It must have taken them months. The video just shows it fast. The design itself is a big thing. You have to maintain center of gravity. Frame has to be moulded or cut precisely, then the outer hull. Not just that in a boat or ship things have to placed ao that tye weight is balanced properly. Otherwise it will topple to one side. Thankfuly nowadays cad cam and cae will show simulation. Olden days they actually weighed things and balanced it physically.

[@VIJAYzk]

​​@@dustycrophopper2743That would be a very time consuming jo😮b

[@richardschaefer3889]

Openly outlook, cackled. Good shit.

[@Rustic-Rovers]

hab schon am anfang gedacht da wird ja gar nicht mehr gearbeitet, cooles endergebnis

[@UNIKYACHTS]

@@Rustic-Rovers Despite the war, Lion 550 boats are being built in many countries on all continents, except Antarctica :-) On the website unikyachts.com/en/construction-of-the-next-lion-550-nears-completion/ there is an overview of the construction of the next boat.

[@Tingtvph9226]

I want to make a boat like this i use for fishing.

[@mrman3196]

No

[@andrehabila8361]

It looks fast. Beautiful sailboat!

[@UNIKYACHTS]

Thank you, we tried to make a modern, inexpensive, fast boat that everyone can afford to buy or build a boat on their own. I think we did a good job.

[@andrehabila8361]

@@UNIKYACHTS I'm sure, you did👏🏻👏🏻👏🏻

[@Jaylp9qw]

Saw your website. Cool designs. Have you Completed the build of lion 550? The 900 looks majestic. Would love to see that build.

[@UNIKYACHTS]

Yes, several Lion 550 boats have been built, one of them can be seen on the Instagram of the guys from California instagram.com/channel_islands_provisioners/, Lion 900 will be built after the victory, the war with russia ruined all plans

[@andrewdrogin]

Фантастика. Вы молодец.

[@ОлегЮрьевичВладивосток]

Эта лодка не для моря...

[@UNIKYACHTS]

@@ОлегЮрьевичВладивосток Эта лодка для моря.

[@dereklucero5785]

The DIY part didn’t mention a full shop, at least 4 other guys, some probably expensive AF precision wood cutter, and etc.

[@UNIKYACHTS]

During assembly, only commonly available hand or power tools were used. And about the guys, you’re right; sometimes several people work, but did I have the right to fire them for the entire duration of the video recording? :-)))

[@DoItYourself-DIY]

Nice boat

[@likbronangperahufiberglass]

thanks for ur video

[@seawavetvofficial9481]

Beautiful yacht

[@shop-skyyi]

Can it be modified to jaff rig or junk rig?

[@UNIKYACHTS]

I think this can be discussed, you can also look at this option lion-550 www.carpboats.com/portfolio/lion-550

[@entoman_nu]

Grt.

[@mansbfishing]

Mantap 👍🏻 👍🏻 👍🏻

[@1980PintoMan]

Looks nice and easy to build. Will the rigging tear it apart?

[@UNIKYACHTS]

The boat has a very solid construction and will easily cope with all loads.

[@UNIKYACHTS]

The boat has a very solid construction and will easily cope with all loads.

[@VIJAYzk]

Do you sell plans?

[@UNIKYACHTS]

Yes, you can buy plans and files for cutting all the details of the boat on CNC, you can pay by bank transfer or PayPal, To purchase, send a request to [e-mail]

[@gregbolitho9775]

Good stuff! You haven't been watching Bourbon Moth Productions, or vice a versa?

[@UNIKYACHTS]

I saw the boat of Bourbon Moth Productions a few days ago, I will be glad if he will take on the construction of one of my boats. :-)))

[@rreconnu1]

Well done. When I first started watching I thought “why do they have a mime working on their boat”? The overalls, striped shirt threw me…maybe a little more time in the sun for that guy…😂

[@UNIKYACHTS]

:-)))

[@luisfbr]

Awesome!!

[@UNIKYACHTS]

Thank you, we try to make the world a better place when we design cool boats.

[@BillyG869]

Not a bad idea, look up an old book by Glen L, Building Plywood Boats. I grew up in the boatyards and still active sailor. I built many boats. You can do it

[@UNIKYACHTS]

Plywood is a good material, lightweight, strong, durable, and easy to process. It is very pleasant to work with plywood.

[@MistiMoan]

It's it you can order?

[@UNIKYACHTS]

You can order a complete kit of the boat from our partners, or order full plans that include files for cutting all parts of the boat on a CNC machine and order cutting from the nearest CNC operator. To order, send a request to [e-mail].

[@apivovarov2]

а что дальше? ещё будете снимать?

[@ramcasty]

Hi there, great boat making! Can you share it to me the blueprint? Thank you!

[@UNIKYACHTS]

Yes, send a request to [e-mail].

[@ramcasty]

@@UNIKYACHTShello I emailed u. Tnx

[@sailingbybooks7772]

pretty good! really fast!!

[@lynnmorris8950]

Well u got the front half done. When u gonna do the back half. And it'll still be just a boat, not a yacht.

[@richardgreen7225]

In the future, boats in this size range could be 3D printed ... But where would be the fun in that?

[@UNIKYACHTS]

There is no problem printing this boat now, you just need to find a printer of the right size :-)))

[@ateliedemaquetes.aereoenav4894]

father and son getting in the way.

[@vmossmann]

Hi! Impressive lines and building simplicity! Do you sell CNC cutting plans? I am from Brazil and the import cost may be prohibitive...to my small pocket... :-)

[@UNIKYACHTS]

Hi, You can buy blueprints and files to build yourself, cut all the parts yourself and build a great boat.

[@MustaqimMuhammadHatta]

perahu yang bagus... 👍

[@UNIKYACHTS]

Terima kasih, saya belum memiliki kapal di Indonesia, tetapi saya harap ini segera berubah :-)

[@MustaqimMuhammadHatta]

ditunggu video berlayarnya... 👍

[@ArthLud]

Nice! What country is this

[@UNIKYACHTS]

Mykolayv, Ukraine.

[@leonidvalentinovich5215]

Смолу на стекляху наливал - не приклеивается. Надо дерево раза на 3 пропитывать предварительно.

[@UNIKYACHTS]

Невозможно понять смысл в вашем наборе слов, попробуйте сформулировать мысль так чтобы она имела какой то смысл.

[@leonidvalentinovich5215]

@@UNIKYACHTS если положить стеклоткань на дерево и залить её сверху смолой, то достаточное количество смолы для пропитки дерева не пройдет через стеклоткань. В результате стеклоткань не приклеится и её можно будет руками спокойно отрывать. Что для эпоксидки, что для полиэфирки на личном опыте убедился, что три раза надо промазывать поверхность перед наложением стеклоткани.

[@UNIKYACHTS]

@@leonidvalentinovich5215 После первого слоя смолы поры древесины закрываются, последующее нанесение смолы только увеличивает поверхностный слой, но никак не может проникнуть в глубь древесины.

[@leonidvalentinovich5215]

@@UNIKYACHTS после первого слоя если дать ему встать. Лист фанеры за пару минут впитывает смолу намазанную кистью и становится почти сухим. На третий раз у меня обычно фанера перестает впитывать. Неделю назад палубу на новом катере оклеивал, 2 раза промазал, показалось что напиталась фанера смолой, но нет, стекляха не приклеилась )

[@sailingmovie]

Can we see inside of boat

[@UNIKYACHTS]

After the victory of Ukraine in the war, I will definitely publish the second part of the video during the first voyage. everything can be seen there.

[@Jaylp9qw]

​@@UNIKYACHTSAre you guys okay? Is that why you haven't uploaded any new videos? I would love to see more of the sailing performance of this boat.

[@barryhopesgthope686]

This looks like the old Periscope Film on building PT boats.

[@jellej4531]

Do you have footage of this boat finished?

[@UNIKYACHTS]

This boat was built in February 22, on the evening of February 23 we tried on the sails and waited for the river to clear of ice, but a few hours later the war began, Russian planes began bombing Mykolaiv...

[@00Mass00]

​@@UNIKYACHTSI'm so sorry hear that, hope you and your family are doing well.

[@SYS-dc6uo]

Doesn't working with the resin require wearing a respirator?

[@UNIKYACHTS]

We use only epoxy resin, it is a material of organic origin, such materials are widely used in dentistry. In addition, we have a very good exhaust ventilation system in the workshop.

[@SYS-dc6uo]

@@UNIKYACHTS but epoxy resins cause eyes, nose, throat and skin irritation, cause allergies and asthma...

[@UNIKYACHTS]

@@SYS-dc6uo Apparently we are talking about polyester resins, they are really very toxic. But we never worked with them precisely because of toxicity.

[@ericwelsh4853]

Keep in mind that this is just the tip of the iceberg. The hull is roughly 1/3 of the work. Instead, put some money in the bank every month for a year or two, then buy a used boat.

[@UNIKYACHTS]

After buying a used boat, set aside some money in the bank each month for ongoing repairs on the used boat. :-)

[@ericwelsh4853]

@@UNIKYACHTS Yes. That's true. It's a lot of work. But....you can start using the boat immediately, while your friends are toiling away for years, building their boats.

[@UNIKYACHTS]

@@ericwelsh4853 I know many people who build boats, including mine, some build a boat for several months and go sailing without waiting for the paint to dry. And others build the same boat slowly for several years. The difference is that some people enjoy boating and other people enjoy building. ;-)

[@sivodesilva9866]

Must be waterproof plywood

[@andychapman1617]

How much would it cost to a just like but a little longer more coastal with a speed type motor for me to live on permanently some energy on board... Could someone get back to me and letw know please .... ?

[@UNIKYACHTS]

Yes, I can do this, detailed information can be obtained by writing a request to email [e-mail]

[@KodaEV]

A video on water?

[@UNIKYACHTS]

This boat is built, on February 23 we finished all the work and raised the sails. And a few hours later, at 4 am on February 24, we woke up from explosions and the sounds of Russian bombers flying overhead ... The video will definitely be after the victory of Ukraine.

[@KodaEV]

@@UNIKYACHTS Слава Україні!,❤

[@UNIKYACHTS]

@@KodaEV Героям Слава!

[@1968vanhalen]

Невероятно, но так только роботы разговаривают, вы настоящий, живой человек?

[@UNIKYACHTS]

С роботом меня еще никто не сравнивал )))

[@williamlai2362]

I like it!

[@josemiguelfleitasmedina2914]

Y la orza? Una pena no poderlo ver acabado.

[@UNIKYACHTS]

Ahora debemos liberar nuestra tierra de los rusos, luego limpiar las minas del Dnieper y el Mar Negro, porque después de que los rusos volaron la presa, toda el área del agua está llena de minas y proyectiles, después de lo cual definitivamente filmaremos una secuela. . Además, uno de nuestros barcos fue botado en USA, quizás también haya un video con su participación. La información estará en la web unikyachts.com y en este canal.

[@Pripodobnii]

Did you order from deagostini?

[@UNIKYACHTS]

No, we built with this technology back in the days when deagostini didn't exist.

[@いぴろ-d8p]

皆さん無事ですか。はやく平和になりますように。

[@UNIKYACHTS]

現在、街への砲撃は少なくなりました。この恐ろしい戦争でウクライナが早期に勝利することを願っています

[@Mooooty]

But does it float?

[@UNIKYACHTS]

I have been designing and building boats for over 30 years, during which time a very large number of boats have been built and launched. On February 23 we set sail and were ready to set sail. But on February 24, at 4 o'clock in the morning, the bombing began, Russia attacked Ukraine ... But this story will definitely continue.

[@motonautica]

Hi, do you have blueprint for cnc to sell?

[@UNIKYACHTS]

Yes, drawings and files for CNC cutting of all boat parts can be obtained by writing a request to [e-mail].

[@zellmer34234]

Who is the guy with his hands on his hips?

[@UNIKYACHTS]

This is the guy from whom we rented space to build a boat :-)

[@UNIKYACHTS]

Ukraine is waging a fierce fight against Russian aggression. The Russian army is bombing peaceful cities, killing women and children. Everyone can help Ukraine resist the aggressor army. Make a donation to the Ukrainian army unikyachts.com/en/home-2/

[@carloko08]

to hell with your dammed propaganda, did you forget to mention the bombings by Ukraine in the region of the Dombas region for ten years where Ukraine killed men, women and children? You also forgot to mention that Selenski is a dammed drug addict and cartel boss, do you want the money for him?

[@administracionadela5037]

quisiera saver como se llema ese modelado para realoizar el armmado

[@UNIKYACHTS]

No entendí bien la pregunta, el modelado 3D se puede hacer en cualquier programa conveniente. Pero para diseñar barcos necesitas tener mucha experiencia, ningún programa diseñará el barco por ti.

[@Goodellsam]

Isn't a yacht at least 35 ft in length?

[@UNIKYACHTS]

A yacht (/jɒt/) is a sailing or power vessel used for pleasure, cruising, or racing. There is no standard definition, though the term generally applies to vessels with a cabin intended for overnight use.

[@ytrezazerty1]

Bonjour, ... il passera par la porte ?

[@UNIKYACHTS]

Cela dépend de la porte à laquelle vous voulez l'amener.

[@Lashauna-ki5jl]

Where do i get print s for model boat

[@UNIKYACHTS]

visit unikyachts.com or send a request to [e-mail]

[@timtreeborgsonjen1533]

Is there a lazer cut kit for sale?

[@UNIKYACHTS]

Yes kits are available, kits can be made in Europe, North America, South America and Australia.

[@aaydinsen]

i want to buy 8m kits. from Turkey. how can i buy kits or plans?

[@UNIKYACHTS]

Hello, you can buy a kit and you can buy plans, for more information, send a request to email [e-mail]

[@山田太郎-r9c1h]

Where did you get this blueprint??

[@UNIKYACHTS]

Blueprint can be downloaded from unikyachts.com or send a request to [e-mail]

[@mateusbarbosa8165]

Top

[@nevergiveup-db6fp]

Where is the other half?

[@UNIKYACHTS]

We finished building the boat and set sail for the first time on February 23, 2022, and a few hours later the war began, russia attacked Ukraine. After victory in the war we will film a sequel to the film.

[@MegaDeansy]

​@@UNIKYACHTS - I wish you a resounding victory !

[@crapisnice]

with cnc and waterjet cutting you can use reclaimed wood and make your own wood honeycomb cores and ply with fiber and bio based epoxy. don't promote forest destruction as wood crops, there are hemp, flax fiber also. thank you for showing us, very good up to date design and construction

[@UNIKYACHTS]

Yes, hemp gives several times more cellulose than wood, and this is an excellent material, hemp is an annual plant, every year you can get new raw materials without cutting down forests that have been growing for centuries. I want to build a boat from this material, unfortunately it is not yet available to me. I will be glad and will support if someone will undertake the construction of a boat from this material.

[@crapisnice]

@@UNIKYACHTS also nanocellulose fiber can be extracted from pine needles or any plant and has similar specs than e-glass, and this extraction process produce lignin as byproduct that can create biobased epoxy. also i think when producing hemp they chop all the plant (what creates costs for blade replacement) instead separating fibres from the plant trunk and making wool for fibre with the rest. also glass fiber and basalt fiber come from silica and basalt rock respectively, what is quite abundant, and they can be melted with concentrated solar parabolic or heliostat and are fairly easy to produce even in a a home melting furnace and arduino fiber spinner

[@lastaccountbannedfortalkin1449]

Mate I appreciate your input and your knowledge as I am a boat builder in UK on my 5 build for myself and this time I'm looking to build something similar to older mayland 14/17ft fisher so my boy can learn it and it's his boat despite the fact I'm not telling him that yet, that's the suprise he gets at the end of it. I will not chose materials based on how green or any other advice based on "saving the planet" I build small boats for a living for people who live a small footprint life same as what I do here in Scotland. Its the big builders and manufacturers you need to be saying this too as they have volume that makes a difference. Plus it's OK saying "use such and such" but these modern tree hugger boats fall apart and get utterly humiluated in the North Sea up by me. They need rebuilt every 3-5yr. No, I'm sorry, I won't be teaching my kids to make a disposable boat. It's dangerous for a start.

[@crapisnice]

@@lastaccountbannedfortalkin1449 it's plywood what roots without maintenance and proper epoxy layer, you must read some boat insurance blogs and forums about the reality of any boat construction. it's also the "little people"'s egoprojects who creates most environmental devastation and industrial waste because big industry work by efficiency however their toxic resources and processes. and i'm a bloke of the people and i support diy production, but in coordinated little hubs with sharing ownership, not 20 full equip garage shops producing a wardrobe once a while. that little boy you are talking can collect discarded polypropylene (which floats) pallets and remelt them to make planks joined with plastic welding, a boat that can last 100 years without rooting or corrosion, only by isolate them from sun degradation with a proper outer layer with aluminum foil and epoxy and veneer wood if you like. there are 6000 million people like you, don't forget that.

[@UNIKYACHTS]

@@lastaccountbannedfortalkin1449 My son took part in the construction of this boat, he went through a good school and received valuable experience.

[@TheJustonemore]

Can I have the plans

[@UNIKYACHTS]

Hello, you can order complete plans and files for CNC cutting of all yacht parts. To do this, send a request to [e-mail]

[@ivancaldas1211]

Muito lindo ....Brasil

[@UNIKYACHTS]

Vários barcos Lion 550 estão em construção no Brasil

[@javiercorreapr9977]

A lot of doubt at the beginning … good… measure twice cut once

[@UNIKYACHTS]

There is no doubt, cut once and then just assemble the puzzle and glue. :-)

[@justinsmith847]

Is this a kit???

[@UNIKYACHTS]

Yes, the boat is built from a kit.

[@ricardojv7834]

It's all made with marine plywood? Where can I buy the plans and instructions?, I want to build my first sailboat by myself

[@UNIKYACHTS]

Yes, all this is made of marine plywood, and epoxy glue, you can order plans on the website unikyachts.com or email [e-mail]

[@ricardojv7834]

@@UNIKYACHTS the plans are those called study plans? Thank you so much i hope i can start building one of your desings soon

[@UNIKYACHTS]

@@ricardojv7834 study plans, this is a trial version, for purchase full plans and cutting files please contact the author of the project email [e-mail]

[@shop-skyyi]

Ukraine will win. Bless Ukraine.

[@UNIKYACHTS]

Thank you! I'm sure of it!

[@nikolai502]

I would not call that a yacht, but; "whatever floats your goat!"

[@UNIKYACHTS]

If I start raising goats, I will definitely ask you for advice. :-)

[@michielderuyter6011]

I see one man who pays everything than the title is wrong haha

[@gilbertogaidargi]

Do you have the videos in refers the conclusions, i.e. external fiberglass, internal etc..

[@UNIKYACHTS]

The whole process of building the yacht Lion 800 and Lion 870 with a lot of photos is described in detail on the website unikyachts.com/en/lion-800-construction/ unikyachts.com/en/lion-800-construction-part-2 unikyachts.com/en/lion-800-construction-part-3/ unikyachts.com/en/construction-lion-800-part-4/

[@henryfranqui1444]

...where is the second part...to see it in the water...

[@UNIKYACHTS]

As soon as I receive a new video, I will definitely publish it.

[@aldolajak1267]

That's not a yacht, it's a cabin cruiser at best, or more likely a luxury runabout.

[@UNIKYACHTS]

I don't want to get into a discussion with you, just read the definition of the term yacht.

[@aldolajak1267]

@@UNIKYACHTS I'm ecstatic. My paddle-board is now a yacht.

[@UNIKYACHTS]

@@aldolajak1267 discussion of terminology is not constructive, do you have questions related to the boat itself?

[@BilalAhmed-fz2lz]

Hi sir ,do you have a pdf have a design?

[@UNIKYACHTS]

Hello, All drawings are in pdf format, also files for cutting all parts on CNC in dxf format are included. Details can be found by writing a request to [e-mail]

[@battlemasterszone1750]

Update: Boat rotted after the first time out and now sits at the bottom of some lake.

[@UNIKYACHTS]

What a vile person you are. Why are you posting these crap? This boat is built, on February 23 we finished all the work and raised the sails. And a few hours later, at 4 am on February 24, we woke up from explosions and the sounds of Russian bombers flying overhead.

[@Jaylp9qw]

@battlemastershit you must be the kind of guy that pisses people off just by existing. when you get free time learn some manners

[@hottunes007]

looks like a sticky boat to the water

[@UNIKYACHTS]

A boat with a lot of potential and will give the owners a lot of highlights

[@siberian_tech]

Здравствуйте, что это за проект?

[@UNIKYACHTS]

Lion 550 adrenaline

[@infinit3insights]

It's a tiny yatch not a small boat

[@UNIKYACHTS]

:-)

[@いぴろ-d8p]

続きが見たいです。

[@UNIKYACHTS]

最前線にいるときは安全でいるのは難しく、狂ったロシア人は毎日殺そうとしています。

[@UNIKYACHTS]

しかし、私たちは勝利し、ロシア人を私たちの土地から追い出すためにできる限りのことをしています。 千島列島も早く日本に戻ってきてほしい。

[@UNIKYACHTS]

2月23日、すべての作業を終え、氷が溶けるのを待って最初の航海に出ましたが、数時間後に戦争が始まりました... 私たちは勝ちます、そして私たちは間違いなく続編を撮ります

[@Mike-h1k]

Self construction?As long as you have a cnc machine and whatever cuts those fancy “scarfs”.It’s easy

[@UNIKYACHTS]

It is not necessary to buy a CNC machine in order to build a boat, just go to the nearest workshop that has a CNC machine and cut the parts.

[@budipirang2694]

Wow