PodGo: Whats the best way to hook up my PodGo

[@panggun]

1:47 Run into PA system 3:38 To audio interface (PC) 6:35 To powered speakers (monitor speakers) 7:28 Real amp (front input) 9:11 to fx loop return section of real amps

[@TheFreeman4955]

Finally! A good overview of how to hook this up! You take someone new to guitar with a small combo amp and they watch a couple hundred KZbin’s on how great Pod Go sounds and buy one. They watch a hundred videos with guys playing EVH getting studio sounding tones but never actually SHOW any detail of how to hook it to your crappy combo amp, your computer, or your monitor. Either they go into extreme detail on internal switching or something else but never actually show you where to plug in at or what noise will come out if you do this or that input/output. Now I’d like to see a video on hookup of the nice overdrive pedals I’ve got into the PG and get good tones. Thanks for putting this out there! It helped a lot!

[@MooseManGuyDude]

thank the lord for this video, the pod go has been nothing but a headache but I feel a bit better after watching this, thanks man

[@JasonCGuitarOfficial]

Glad it helped!

[@MooseManGuyDude]

this video literally saved my pod go live, I was on the verge of just selling the thing but this video changed everything and for the first time since I got the pod im ACTUALLY VIBING with how its making my tone and guitar feel! you da man @@JasonCGuitarOfficial

[@JasonCGuitarOfficial]

Thanks Dylan :)

[@Hatchbackpapii]

After the video finished I said to myself “that was a really good video” cheers!

[@JasonCGuitarOfficial]

Glad you enjoyed it

[@demizius]

i just want to say, im glad you exist. poured through quite a few posts trying to hook my pod go up through my audio interface.. in hindsight i didn't try that hard, but i tried what i thought was obvious. anyway, didnt find how to do it until i came across this vid.. hell yea dude.

[@JasonCGuitarOfficial]

Glad it helped :)

[@SeanHyland]

I thought the POD Go is also an audio interface and you can record audio over USB. Isn't this true, and if so, why would you plug it into an interface then?

[@Chimp_No_1]

Incredibly helpful video Jason - even after 4 years !

[@Onoins425]

Great video. I'm a bit of a technophobe, but was attracted to the simplicity of the Pod Go (I'm a certified plug-and-play man!) This has sealed the deal. I feel confident buying one now. Couldn't find any other vids that cover all the setups, so thanks for your invaluable input, my friend.

[@justinTime077]

Ugh. Nasty junk junk has no umpf behind that sound tho! This digital generation of guitar players makes me ill. How can any guitar player not live for the rush of feeling the rumble of an amplifier? Weirdos! (I’m a millennial)

[@syamlalnarayanan3788]

Hi Bro, Do you connecting it straight to the mixer , so , that way we can use it for live performance ? Please help..

[@flowride68]

100%. I'm glad I found this channel.

[@Fudgybum]

Dont know why its so hard to find some of this info anywhere on the Internet. Thank you so much!

[@mksounds6326]

I bought my Pod Go last week and have been looking for this video ever since. I have an old Fender Evil Twin in the garage that the high-impedance jack is messed up. I was thinking about running the Pod Go into the "Power Amp In" of the Twin essentially making it a 2x12 powered cabinet. Then you mentioned the very technique at the end of your video. You're a genius! Thanks again and keep rockin'! Sick pinch harms, too, by the way. MK

[@Mojoman57]

This couldn't have been better. Perfectly explained.

[@MeanMaoriMean555]

Thank you sir! With all the rummaging around KZbin trying to understand stuff I just got THREE ‘penny drop aha moments’ in this one video. Mate that was totally 💯%. Soo appreciated! 🙏

[@darwinwhitten8542]

Thanks for all your tutorials. I just got a pod go and know nothing about it. Your videos are helping me.

[@crazkurtz]

4 cable method is awesome with great sounding amp. You get more than 4 extra effects. You get wah, volume, and boost (eq). That with the 4 additional effects makes it awesome. Not to mention snap shots

[@TheTimeProphet]

Thanks. I only have a Roland cube which has no loopback, so at least I know I can plug it in the front end. Just gotta remember to turn off cab simulation. I am getting the Pod go on Monday.

[@PaulChoate-s4v]

Thank you for the vid. Good info. I plug mine into a Line 6 Power Cab or a Headrush FRFR108. Both sound great. They sound night & day different from each other but both sound great nonetheless.

[@ladislavmaday4144]

Finaly i found practical tutorial and i thank you for this. Everyone just show you tones, but noone show you possibilities how to plug it in. Now i just need choose from line 6 pod go or mooer ge300 lite

[@ianhanson85]

Thanks a million. This answered all my questions. Very nicely done.

[@emounstron8585]

Finally, going straight into center of all, a vídeo of million dollars. Thank you, subscription right now. Just been all week looking for how sound Pog Go directly on Fr studio; What can I say, I like it!

[@bradmalinowski]

Great video, very helpful. One thing about the footswitch toppers,,,, once they are on, you can't get them off. They fit very snugly.

[@jessejohnson1375]

Please tell me where I can purchase the foot switch toppers ?

[@uptownphotography]

I think you solved a mystery for me. A friend of mine came over with his Pod Go so I could test it out, as I was thinking of buying one for recording. We plugged the main mono output into my Allen Heath analog board via a DI box. It just sounded terrible with over driven and distortion sounds. It was harsh, sounded fizzy with the highs and muddy at times also. I don't think, based on what you mentioned here, that the IR cab was engaged, as I know this unit can sound really good from other videos I have watched. I was super very disappointed I will have to get my friend's Pod Go back over here for another test drive. Thanks for sharing this info as I really would like to get great distortion and overdrive recording direct into a DAW. Phil NYC Area

[@uptownphotography]

@@JasonCGuitarOfficial Yes, and thanks to your video I saw how you turn it on and off. This has to explain why my friend Pod Go sounded so bad through my recording mixer. Does using the stereo outputs to a mixer's (TRS line inputs) sound the same as using a DI box to a mixer with the Pod Go? Have you ever tried that? Just curious. Thanks.... Phil

[@tillthedaydawns]

Awesome clip! Thanks for the virtual tour. Greetings from Seoul.

[@flowride68]

Great vid. If you don't mind, a couple questions. 1. Did you run AMP OUT to the front of the amp or did you use the L Mono Out? From what I'm to understand, there is a difference. 2. Have you ever run direct-to-PA and ALSO to your amp/cab for live play? The reason I ask is because if you're running direct, the amp sound won't matter. You'll end up just using it for stage volume. 3. If you have FRFR's, you can also run XLR our to FOH from them. I've done it with the Headrush FRFR 108's a couple of times.

[@flowride68]

@@JasonCGuitarOfficial I've thought about utilizing a Line 6 Catalyst 2x12 as a backup/stage monitor. There's a lot of people doing that instead of the Powercabs.

[@oribushari7995]

If i have pair of studio monitors for bedroom usage What the setup i need in pod go? And wher i connect the studio monitors? Thanks!

[@dondirtcheap2410]

Hey Jason, thanks so much. I have been struggling with the 4 Cable Method and my Marshall DSL 20 for weeks. I could not get it to work or get my head around it. Been through the manual and numerous other forum posts. When I saw this video I thought "It can't be that easy", but EUREKAAAAA!!! A few things to mention though in the hope that it will help others struggling. The level of the signal before the Pod Go FX Loop block being passed through the FX Loop must be adjusted by the FX Mono Loop block controls, to get a nice level. My Marshall pedal FX loop switch must be engaged to bring in the effects after the Pod Go FX Mono Loop block. And, very importantly, the level of the effects/signal after the loop is controlled by the Pod Go main volume control. Which muddys the water and threw me a curve ball, as it has no effect on the signal before the FX Mono Loop block.

[@juangallardo6180]

Hi Jason, do you need a TRS cable to connect it direct to the studio monitor or can you use a TS cable?

[@SaterUnholy]

Nice video dude! I’m planning to run my Pod Go to a FRFR speaker and also to the mixer, should i used the 2 Main Outs or use the amp out for one?

[@Lukas-mu2tw]

Super informative video. I really appreciate you uploading this man!

[@jessetate9701]

Thanks man might get me a studio mono from guitar center and hook up my pod go into it!

[@seven7asable]

Finally the perfect video! Thanks for setting up this video exactly what I needed

[@mikeiniguez7621]

Hi, so how do i connect if im not using an amp.. i connect through a direct box.. how do i connect? Also do i turn off the cab/amp off or have them on?

[@familytablet9055]

Great video very informative and easy to follow explanation

[@timothyeads1657]

That patch was pretty solid. I was leaning towards keeping my 500X and adding a two notes torpedo to it. This is making me change my tune. I like that you can turn off the cabs on the fly. The 500X, it's not that simple.

[@timothyeads1657]

HAHAHAHA. That's hilarious. Thanks man for the reply. Going to trade up for it the more I read about it.

[@dylancr32]

you must to use AMP or Preamp (of Pod go) to connect on the Fxloop return? (sorry for my bad english)

[@wertawonka]

Is the pod go loud enough for live situations? My guitarist is pluging into a fender champion 100 and with all the levels up on the pod the amp needs to be on 10 for it to even start competing with the drums and bass. Are we doing something wrong? We are plugging into the front of the amp

[@artreemusic2646]

A great test because the sound is caught with a phone, not a microphone placed next to the cabinet. the question is what exactly is the IR in the POD Go you have ? Isn't this something from the Jens Bogren series ? I have three of his packs but I didn't find anything for myself and yours sounds great. and what amp do you use in the POD go ? ( english translator ;) )

[@JasonCGuitarOfficial]

Its the 5150, the Cabinet is the BaldBeauty from Jens's first pack.

[@KingDjH19]

Ok how do I do this? I have a peavy 6505 Mh slave into a Seymour Duncan power stage 700 and then I want to use the pod go for effects only like reverb, chorus, modulation and etc. Can I use the pod go into a slave amp that has no pre amp out? Thank you

[@PostColorGear]

Does it just/only bypass the tone controls in the front when using the return in the back? In other words, if I chose to use the amp's distortion and wanted to swap between clean and dirty, does that still work? I don't have an amp to test right now.

[@maiksie]

Ty for your Video. My amp has a Power amp in also. Could i just put it into that and have the same as if i use the effects return?

[@STEVENMICHAELHancock-se5yx]

STEVIE THUNDER I'VE GOT A LINE SIX V AMPLIFIER AND HOW DO I HOOK UP MY POD GO TOO IT TO SOUND GOOD

[@raphacbreve1368]

Really helpful video!! Thanks Jason!!

[@jamesmitchell2804]

What output on the Pod are you plugging into in order to line it into an interface?

[@kierandoherty499]

Hi there. As the pod go has a built in interface, would it be ok just to use that, instead of the scarlet one you showed in this video? Thanks for your help.

[@Sensei10238]

Awesome video. I was looking for this! Thanks man.

[@sabbster1157]

AWESOME. I know tube is better. But what would it sound thru a solid state or modeling amp such as a Katana ?

[@sabbster1157]

@@JasonCGuitarOfficial I want to plug the pod go into the loop of the katana

[@matteoradi]

I have to enter into a mixer but in the meantime a want to monitor myself with an Headrush FrFr, i would llkebto enter into mixer with the Left main Out to control che volume with Pod's volume knob, and i haven't out socket from mixer to the monitor. Can i connect mine FrFr to Amp Out socket on the podGo?

[@Jymius]

Amazing set! Could you let me know if you have same output sound through scarlet plus monitors and pod go directly to monitors? I have headset and I can not get same volume at the end and it's awfully!!!

[@jessejohnson1375]

What do you plug into effects loop send of your amplifier ??

[@craig.encinitas]

And if I want stereo out to studio monitors. One cable for left, one for right. Could I use two guitar patch cables out the back of the Pod Go? Thanks for making this video.

[@khonde_99]

Hi Jason.. that's greats Video, may i know the different sound quality between "Amp Out" vs "Main Output" ?, can i implement this same way with POD Go "Amp Out"..? Many thanks..

[@jonathanaudelo9135]

@@JasonCGuitarOfficial Hay diferencia?

[@brandonhernandez3482]

Man i learned more from you than the actual company 😂

[@douglasvaughn9349]

Thanks for the video. What’s the proper method of connecting my pod go to an frfr speaker? Also when I use a drop d pedal into the pod go it seems to sound low and like crap .

[@douglasvaughn9349]

@@JasonCGuitarOfficial it’s a digit each drop d pedal I use for down tuning . When I engage the pedal it sound like shit. I’m sure I have it running wrong . Any help?

[@thiagomucenecki4883]

friend how can i get the preset used in the video...? what is his name to buy? thanks

[@hierrogm]

Great vid …I’m running pod go with to active beringers ….dood the stereo sound on stage is sick …may never use a guitar cab again …but I git to thinking .,what I hook up my active speakers to my Mesa boogie 4x12…gonna try I read it’s totally possible

[@1serious0mfr]

Could i just plug it directly into the cab?

[@alvaroantonioocampogrey2823]

Juust the video I was looking for!! greaat!

[@BagusWibisono]

Love you man! This is what i want!

[@YEM_]

When I run it into my interface it cuts the volume drastically. I need to crank the master on the pod go to like 75 percent to hear it at normal volume. Any ideas?

[@madmanRT83]

That tone was awesome what amp model were you using?

[@joshuasimatupang1260]

Thank you Jason, very informative video. I got a question. What kind of cables should be used from pod go output to studio monitor? Is it instrumental/audio/unbalanced/balanced cables?

[@bustanorms2028]

I cant sound good direct to PA,do you think i need to use i.r.?does it make difference in sound,but when i use to audio interface ,it sound good

[@syamlalnarayanan3788]

@@JasonCGuitarOfficial Sir , to connect it directly to the PA ,do we need a Direct box. Is IRd means a direct box? please help

[@AthleticMediaPro]

Hi, I am thinking about running my pod go into a pair of presonus eris 3.5 speakers. The speakers have a left and right 1/4 in jack. if i run a TRS cable from the pod to the speaker will i get stereo sound, only 1 monitor or mono from both ? Thanks in advance.

[@JasonCGuitarOfficial]

You would need a TRS to two TR Y Cable.

[@preciseaudioblog]

How do you connect to the PA with only TRS cable, to the line input? Thank you.

[@JasonCGuitarOfficial]

The Board you are plugging into has to support TRS via a Combo Jack or1/4 TRS input

[@preciseaudioblog]

@@JasonCGuitarOfficial Thank you

[@-jeffk3339]

All 3 examples were coming out of the MAIN OUT of the Pod Go (left mono) - correct? So don't use the AMP out when going to your amp?

[@-jeffk3339]

Jason Constantine got it I think my Victory Sheriff is the same.

[@-jeffk3339]

@@JasonCGuitarOfficial Thank you!

[@wout69]

I thought amp and cab sim were blocked when using amp out?

[@mananakoa2412]

How do you connect to the audio interface from the pod go? I already have the monitors connected to the interface via RCA. My interface has TRS inputs would that be how I connect it from the pod go mains?

[@rickhammel9541]

are you using the main out on the pod go or the amp out? does it matter which one you use on a real guitar combo amp? Also, is there a way to turn off all cab sims for the unit so I don't have to keep doing it each time I change a preset? Thanks! great videos!

[@stevennetzel]

I went back and looked. He had it in the Main Out.

[@MarceloMoraisGuitar]

Hey, you have not mentioned that the unit is an interface itself. I plugged into my pro tools on my MacBook and it recognized instantly the pogGo interface . Thanks for the video!

[@MarceloMoraisGuitar]

Jason Constantine I see, that’s true!

[@denizkurt5496]

Can you plz share your impulse response I don’t have any I can’t find them anywhere and I want that PA system sound amk

[@JasonCGuitarOfficial]

It was shared in the PodGo Group facebook.com/groups/podgousers

[@anasjacobs4130]

Hey bro. I have the same amp EVH. What if i want to use both amp for my stage output and at the same time output for front house monitors ? Should i connect DI to EVH output return or to Line 6 pedal ? Thanks a lot for your support. Cheers

[@stevemoore6349]

Fantastic job! Killed it. Btw,,loved the pinch harmonics.lol

[@rafaelmorales4288]

Does the amp out have a different volume control

[@jackeerdmans9839]

What would you suggest if you don’t have an fx loop on your amp?

[@mickeybravo6702]

This video is a couple years old now, but question if anyone is still monitoring the channel. After a period of research and personal debate, I finally went with studio monitors as my home practice solution. In my case I purchased JBL 308 Mk II 8" studio monitors. My question relates to volume control, between the guitar, the Pod Go, and the monitors. I generally play on the acoustic sim and clean to medium-gain spectrum, rarely if ever using high-gain/heavy distortion effects or pre-amp/CAB IRs. All things being equal, when first deciding where mid/max volume is going to be and balance volume with quality of tone, is it better to: 1. Set guitar to 10 and monitor to ten, then tweak volume levels through the Pod Go 2. guitar to 10, pod go volume max, then find mid and max with the monitor 3. something in between (e.g. both pod go and monitor at 5, then adjust with either monitor or pod go). I know once I get max volume set (in my case, trying to avoid natural distortion on the monitor but loud enough to hear everything in the signal chain from the guitar itself to the effects and the pre-amp/cab IR) I can use the guitar volume knob to dial down or up for "pushing" the pod go into distortion or cleaning it up. Basically, seeking advice on what others have done in the balance of volume control between the three different main sources of volume level (not accounting for effects pedal volume levels, which I know is a bit more complex).

[@mickeybravo6702]

@@JasonCGuitarOfficial thank you so much, it is great that as a content creator you also take time to respond here to nearly everyone. Very helpful for me at the young age of 37 whose kids have already surpassed him in the technology area.

[@Ultra7165]

When you hooked into the audio interface is it recording in stereo? What out do you use?

[@davidordonez8964]

I’m connecting my main out from a ts-Ts cable to a Rackmount presonus StudioLive, and that goes to the presonus StudioLive mixer. But I ain’t getting the full sound of the pod go (through the speakers that goes to the audience) as if I were playing the same patch through my headphones at home. What could be wrong with my setup? Pd: I do have main out: precab/Ir. And it’s mono the setup

[@davidordonez8964]

@@JasonCGuitarOfficial Makes sense, but I couldn’t even hear the delays feedback? I just had a patch with distortion and delay, and I couldn’t even hear the feedback, and the guitar sounded cleaned, not even like distorted. Still the same thing? Cause the delay feedback at least should have sounded

[@tgdb4968]

Great stuff, thanks man.

[@micklouie]

Jason what if I want to run to FOH and also have an frfr behind me on stage. I have harbinger v2312 powered speaker. Where do I hook that up too? I don't want to lose pedals in the process. I was told keep distortion in front of cab and delays after cab. So don't want to move cab around. I would like to have some stage volume with my other players. I'm really confused. Mike

[@micklouie]

@@JasonCGuitarOfficial Thank you for the advice. I like your viedos very cool. I also learned to set the volume knob to control the amp only so I can adjust to my taste. Pretty cool unit. I am having som backlase from a sound guy who doesn't understand the idea of the podgo. He still thinks I need to run it into an amp. PA's are not used for guitar sounds he says. I think my podgo sounds good out of a PA. I played a couple places and it turned out well.

[@micklouie]

@@JasonCGuitarOfficial so I played a gig Friday and the sound guy had a XLR cable and no DI box. So I used the amp out to my harbinger v2312. Then he connected the XLR to back of my speaker. It sounded good but was the correct way to connect? I tried to discuss with him but you know sound guys. They know best.

[@knottsscary]

what kind of monitors can ibuy that i can plug directly into? I like playing downstairs sometimes and just wanna be able to plug into some speakers and play.

[@pauljackson935]

Thank you Jason

[@PaoloC.]

There's another option that is connecting the pod go via usb to the computer and use it as an audio interface, so you got 4 channels to record with. Of course this is pretty much for recording only or if you don't have an audio interface like that Focusrite.

[@esticaandres3169]

@@JasonCGuitarOfficial Run into issues? What issues? Line 6 website sells it as a fully working interface.

[@loveaboveall2382]

This guy is doing God's work without knowing it!

[@dominicjamero9762]

Hi Sir. How do you route cables from pod go to foh in a stereo set up. 😊 TIA

[@dominicjamero9762]

@@JasonCGuitarOfficial , thank you so much Sir!

[@jessejohnson1375]

Where can I purchase the foot switch top covers ???

[@hashmark13]

So if you are running the GO POD into the FX Return on your amp and turn off the CAB SIM in the GO POD.... are you getting the amp modelling?

[@hashmark13]

@@JasonCGuitarOfficial Sorry to be a bother ...but I dont get it then. Does that not negate the modelling amp? I guess I am trying to understand ...does not the cab sims make the sound? Otherwise we are using our own amp speaker, right?

[@ericvoelzke2246]

I know this post is old, but just ran across this. I like your tone, do you have any patches you sell, or any settings you would give up? I like my pod go, trying to get a good rhythm tone...

[@ericvoelzke2246]

Thanks!!

[@dannyheath8876]

Excellent tutorial 👍🏻👍🏻

[@danc3746]

Nice video. I use the Pod Go with an Orange Pedal Baby and a real cabinet. I only use the Pod's PreAmps with cabinets off with this method, I do not use full amps. You mentioned Preamps with the 4CM, why wouldn't you do the same when running the unit through the amp's effects return?

[@danc3746]

@@JasonCGuitarOfficial I hear ya. I seem to get much better results with the preamps.

[@misslillysdaddy]

I am about to run the Pod Go into a Pedal Baby and 4x12 cab. I’m glad to see someone else doing this without issues. I will try to remember to use the Preamps with cabinets off. Any other tips ? Thanks

[@israelrodriguez6986]

So let me get this straight, in essence it really doesn’t matter what amp you buy ( I need to buy one with an fx loop input for my pod go) as long as it has the RETURN/FX LOOP input right? Cuz I mean your bypassing all the amp tones to get the best use of the pod go…?

[@JasonCGuitarOfficial]

100% correct the physical cabinet you use is going to affect the tone way more.

[@jayblackdogg]

Very helpful videos, thanks! I'm planning to hook up the POD GO direct to mixer without a direct box. My question is do you use 1/4 TS to XLR or 1/4 TRS to XLR cable?

[@jayblackdogg]

@@JasonCGuitarOfficial thanks!

[@jayblackdogg]

@@JasonCGuitarOfficial BTW it shouldn't be an issue if I do use a TRS to XLR cable right? Can't seem to find one right now

[@jessejohnson1375]

Where can I get the colored covers for the foot switches of the PodGo ?

[@jessejohnson1375]

I did not see a link in description

[@syaheer8689]

When connecting direct to PA, whats the function of the DI box? Is it really needed?

[@jeffreytang7434]

i want minimal setup cause Im on a tight budget, so no money for amp or pedals or preamps or other stuff I just have a Pod Go, headphone and shelf speakers. can i just plug in my podgo in a power outlet, guitar, and Headphone/speaker and start jamming? or will it sound terrible? also is this a device that I have to connect to a pc/ipad to use?

[@deetsugc7311]

I ordered one a while ago still waiting ! But can I use it through my boss katana power amp in port

[@rapberry3072]

Hello! When plugging the Pod Go in the FX loop of a solid state amp, do I have to turn both of the amp head and cabinet? Looking for your response. Nice video anyway!

[@rapberry3072]

@@JasonCGuitarOfficial so the amp head on the Pod Go is the only one I should be using?

[@alvaroantonioocampogrey2823]

How do you compare M9 vs Pod Go in terms sound quality of the effects?

[@tommyk4113]

can i buy your impulse responses? i’ve purchased a few others and they don’t sound as good as these (5:09)

[@lamgefyoutoob]

This was great. Thank you very much.

[@user-cd9ui4qv4q]

Great video. I have a POD GO Wireless, I want to connect the POD go directly into my Focusrite 2I2 using PODGO Main Outs TRS into 2i2 XLR line 1 (Y XLR to 2 TRS cable) then connect my monitors to Focusrite line outputs. Is that the right way?

[@user-cd9ui4qv4q]

@@JasonCGuitarOfficial worked you the man. Used a y xlr trs cable into to ai input 1. Thanks Jason

[@t.scholz4848]

Hello Jason, New Podgo user and thank you very much for your Videos. Sorry major bone head questions. I have a Mackie mixer with 2 Powered SRM 450 speakers. Most of the stock presets sound like crap so I purchased some killer sounding presets for clean, crunch, lead etc. They still dont sound good. I am ready to go back to an amp. Can you tell me the best way to connect direct to my mackie board. I have 1 or 2 TRS quarter inch to XLR cables so I can run mono or stereo. I will buy whatever cables are necessary to make this sound good. How would you hook it up? 2) sorry, slow guy, you said to turn off the cabinet response on the podgo. can you please tell me how to do that. I am not technical and I couldnt see what you were doing to turn it off. I am hoping by addressing both of my questions I can get back to some killer sound running direct. My other guitar bandmate has another modeler that sounds awesome direct to my PA so I know I am doing something wrong on my podgo. thank you for your help! Tom

[@t.scholz4848]

Thank you so much for your quick response and expertise. I will give it a shot tomorrow. Best Tom,@@JasonCGuitarOfficial

[@gus3333]

very useful! thank you. How can I run the podgo as a VST in my DAW in order to test the presets and make adjustments with a recorded riff? all I can hear from my DAW is the DI by connecting to my interface. I still cant dial a decent metal tone in this toy

[@gus3333]

@@JasonCGuitarOfficial I believe that connecting the output of the interface to the guitar-in of the pod go, can do a sort of reamp

[@TheAjCalvillo]

@@gus3333 as far as I know, this is correct, just don’t put any kind of plugins and just run it from the PodGo.

[@sneakerjoe23]

I didn’t think it sounded bad with the cab turned on going through the front of the amp. Definitely sounded better through the effects loop though. How do you feel about the powered speakers Line 6 sells to be used with helix and this?

[@sneakerjoe23]

Jason Constantine I want to build a practice setup for home with the PodGo but don’t want to spend too much money on an amp or speaker for it, any recommendations under $500?

[@johngonzales8224]

when you go into an amplifier aren't you suppose to use the amp out put instead. I thought that eliminates the cab and amp sims.