Victory VAP SS arrows!!

[@josephtreadlightly5686]

I made a set of Victory Xtorsion arrows like 3 years ago. U would be in the mid 600's in weight to get that FOC @ the minimum of 15% FOC. That means u would need to put a 150 grain b.h. up front to screw into the 125 grain Ethics insert on that 29" arrow build. This arrow passed the twig test better than all others. The twig test setup is putting a 3D deer target where a twig is located in the vital V halfway between myself & the target. Hitting the twig that falls to the ground & hitting the target tight on the shoulder is a cool thing to see.

[@MNRanger17]

I really enjoy these technical arrow videos

[@phillipcaseres7084]

I decided to use these this year on my first otc Colorado elk hunt. 30 inch shaft cut with factory vanes believe they are fusion , 95 gr stainless outsert and 100 grain tip was a whopping 560 grains. Heavy! Shooting them at 273 fps . Will see what happens.

[@Orr_s]

Been waiting for this vid! I built mine with the 60 grain aluminum insert and steel collar from Ethics…i put mine thru 2 diff fences and poles.(didnt adjust sight) and they did not bend and both arrows were still like new. I think mine came in 480 grains total 100 gr heads, and 4 fletch. 28.75” cut to cut

[@JCo-zh1kx]

Somebody needs to do a comparison of all the composite / jacketed arrows (fmj, cap, kinetic kaos, max red, etc)

[@JCo-zh1kx]

😉😉

[@codeherooutdoors]

Just bought a dozen of these at work yesterday to try out and then the man, the myth, the mfjj makes a video a day later on them. It’s gonna be a good week.

[@caninphx]

I hated the arrows. actually I dispose victory in general. find they are very fragile and yes these ones as well.

[@wcwcgarner2717]

It's nice that your showing a lot of arrow reviews. But were are the bow builds at?

[@sjmonty19]

I think he had a problem with a few of the bows

[@lisavanhouten7806]

Thank you, I appreciate this style video's. Well done

[@BigwoodzOG]

Question on arrow length with these- hunting arrow, 95 grain collar and iron will solid. How far in front of rest do you recommend they be cut? (Shooting Mathews VXR no clearance issues w riser)

[@sinepari9160]

Most of the new super micro arrows are 9+gpi. I just made some easton axis long range with a 150 head (50gr insert) @ 500gr with 14% foc. It's tough to build these 4mm's at less than 500gr. I may go no wrap and three (vs four) vane and a 125 head to get one to 450-470-ish with a bit better foc. Does it really matter? I think a 450gr with 12% foc is enough from modern compounds to kill most things on earth.

[@tonywoolf]

Why do you have a mono sound? Left channel only. Weird.

[@Pariscj]

Thanks i was curious about these in comparison to the fmj 4mm.. fmjs are cool but bends easily… NOW the real discussion when are you going to do the carbon express maxima triads? 🥺

[@shortbuslife3440]

Looking for light metal arrows as club requires them for outdoor target shooting here, any suggestions?

[@CleanConnections]

I shoot on a rugby pitch so it isn’t an options to lose an arrow in the dirt. We have a metal detector and these would be so much easier to find. Perfect really 👍

[@ThomasShue]

What are the best whitetail arrows that can be built? At least your opinion. I’ve been using Vap with Grim reapers for a few years now and that are great arrows. I’m never against upgrading. If price is no budget, what would you build

[@suzgabverdugo933]

Tough arrows. Longest lasting dozen I’ve ever had. Took a shot at a rattle snake and hit a rock blew up the rock and busted the collar and broad head. The arrow is good still.🤣

[@bradmauldin902]

LIke MF and the videos. Obvious he is passionate and an expert in "our hobby!" Bought a dozen Victory VAP SS from Podium. Wish I had purchased elsewhere. Put fletched arrows in the cart only to find out - two weeks later - the shop was actually fletching these arrows. I chose to accept this based on MF's level of expertise. Mistake. The person who fletched put the maximum helical on the vanes - not my request. Three weeks post order - like ordering from the SEARS catalog - the arrows arrived. Half had vanes that had released from the glue, two were missing two or more vanes completely. Arrows are great - I'll buy more - elsewhere. I will watch, like and continue to value the content but avoid purchasing in the future.

[@jayoglesby9685]

I like the victory rip tko arrows but I noticed that they weren’t that durable I bought a dozen two years ago n did just target shoots at local ranges n at the end of the year just shooting them I broke 7 out of the 12 n lost the 60grain ss outserts I got with them n I even used a good epoxy to put them in $150ish dollars I feel was wasted so I won’t buy them anymore

[@paytenblevins3401]

Same happened to me, won’t buy them again

[@jamesstovall2819]

Victory makes a 92 grain Stainless Steel VAP Outsert in .166 I run them on both my VAP SS 350 Spine as well as my VAP TKO 300 Spine shafts. I have right at 15.2 %foc with a 100 grain field point. VAP SS 350 overall weight of 471 grains. My VAP TKO 300 comes out to 492 grains with a 100 grain point with almost the same foc

[@jamesstovall2819]

70 lbs Mathews Phase 4 33" 70 lbs VAP SS 350 471 grains 275 fps 15.2% foc, Grim Reaper 4 blade Micro Hades 100 grain. Darts! My VAP TKO 300 492grains 270 fps 15 %foc. 100 grain G5 Megameat or Deadmeat V2. Simply Devastating!

[@stevec.7515]

Didn't know if you could do an error review on the victory extreme velocity

[@keithw20]

Have you checked out the Easton t64... any thoughts...

[@jwild5360]

They do have a 95 grain stainless steel insert

[@Matto_Harvo]

What does MF in MFJJ stand for? Thanks

[@jaygolliday8152]

Are the 95 grain shok tl insert not stainless steel?

[@tommurphy6972]

With that ss in side, how hard are they to cut

[@GibsonTristan]

Do the 2022 pse omen speed test, it seems exaggerated

[@joevandivner9704]

That Easton titanium insert. Does it for sure fit into the victory arrows? I no I have heard some people claim that you may get fitting issues. Also the victory 75 grain stainless and aluminum inserts what part of that insert is aluminum?

[@liamboyle9199]

going by something he said the other day the aluminium is collar part

[@woodyousley2712]

Yes the Easton Titanium fit perfect in the VAP TKO arrows. I used that combo before.

[@notlocw]

Great video josh. What about the carbon express maxima red?

[@Pariscj]

I really want to see the maxima triads they are easily the most expensive i want to see how much of their value they actually hold

[@notlocw]

Same Iv bein debating on trying them out. I am currently shooting the destroyer mx hunter they seem two shoot pretty good.

[@TheSmedrock1]

MFJJ what bow release do you use ?

[@NPC-fl3gq]

Did the Xtorsion also have SS in it!?

[@ericwolbert3256]

Yes!

[@jedjones9699]

Where those other bow builds at....

[@YoureSoVane]

I find the Black Eagle stock outsert is quite reliable when internally footed with a long HIT insert like the Snyder Core inserts.

[@AlexOrlovallmountainsports]

i broke 350 spine, V1 during hunting..

[@dustinmize994]

Love the channel, would like to see a video on refletching a damaged arrow

[@stick__shooter]

I know you don't have much love for standard diameter shafts, but I'd love to see you throw the VF TKO shafts and Easton 6.5 Match Grade through your test.

[@robertherston865]

Review the Easton match grade 6.5 please. Keep up the content, thank you for what your doing.

[@ittybitbobo7657]

After reading the one coment on buying arrows from his shop.....hummmmmm.... i wont be buying anything from him .

[@deserthunter5314]

Id like to see you try the Easton procomps

[@5MinuteMaj0r]

Unsubscribed - all these arrow shaft spinning and weighing videos make my eyes roll back to 2005 when I might have been excited to find even the most boring arrow test content on KZbin. Peace out. I'll check back later when you might have some different content.