Polaris backup valve repair Tutorial - Save $50.00!!

In this video I show you how to save $50.00 with a Polaris Backup Valve repair!
Back Up Valve replacement - amzn.to/3usTgib
Polaris Back Up Valve Gearbox - amzn.to/3O79auq
#backupvalve
If you like videos like this one please subscribe to the channel!
Cloudy Pool Help - • Cloudy Pool Water Help
Low Pool Chlorine Help - • Low Chlorine Levels in...
Swimming Pool Test Kits I use - • Best Pool Test Kit I R...
Polaris Backup Valve Repair Tip - • Polaris backup valve r...
High Pool Phosphates Help - • Pool Phosphate treatme...
Polaris Pool Parts I carry on my pool route -
Pool Test Strips I use - • Pool Test Strips
How to set the time for a swimming pool timer - • How to set the time on...
Pool Skimmer Leak Help - • Pool Leak Repair - How...
How to use pool clarifier - • Pool Clarifier How To Use
Swimming Pool Timer Troubleshooting - • Pool Timer Troubleshoo...
Salt water pool no flow light help - • Salt Water Pool No Flo...
Pool Pump Lid Opener Tool I use - • Best Pool Test Kit I R...
How to remove swimming pool stains - • How to remove Pool Sta...
------------------------------------------------------------------------
Products I recommend!
Pool Test Kit - amzn.to/2ODilmJ
Pool Test Strips - amzn.to/2ODaGoe
Pool Net - amzn.to/3bp046b
Pool Telescopic Pole - amzn.to/3axV67O
Pool Vacuum Head - amzn.to/2OEZNCv
Pool Hose - amzn.to/2uuGDIK
Pool Brush - amzn.to/2OFePIB
Pool Leaf Catcher - amzn.to/2ODDs8C
Best Suction Side Cleaner - amzn.to/3cA8CdB
----------------------------------------------------------------------------

[@ClearlySeen]

Polaris Back Up Valve Shell Only - amzn.to/2wegGy3 Back Up Valve Full Replacement - amzn.to/3usTgib Polaris Back Up Valve Gearbox - amzn.to/2YBgtkG

[@JuanPerez-fz5oo]

after watching ur video it gave me the knowledge to fix that little gear box. it isn't a complicated device. all i had to do was pull some of the gear apart and rinse it off and then push the gears close to each other again and then rotate it to make sure all the gear teeth arent missing. thnks for the video.

[@lailascott1377]

Great video! Get yourself a simple phone tripod - would elevate your videos so much! Keep up the great work!

[@ClearlySeen]

I appreciate it. Yeah, that video was made several years ago and I have a tripod now. Thanks for watching.

[@TheMarkWilson]

You sir are doing the Lord’s work. I did have to replace the whole valve, but the link you provided to Amazon meant that I still only spent less than $50. Popped that new valve on there and clean pool now.

[@ClearlySeen]

Thank you! Glade to hear!

[@tvtantrums]

Great video. I have one problem I can’t get the collar to unscrew it’s jammed in there. Any suggestions on how to pry it loose without hurting the housing?

[@ClearlySeen]

It’s not super easy at all if you have a small hacksaw you can use that to cut it and then just pop it off with a flat head screwdriver.

[@jq7216]

Very good information - thanks!

[@94530Cody]

Wonderful video. Thanks

[@victoriaharris6091]

Great, thanks for tip!

[@suecreech455]

Very informative!!

[@marks47]

is there anything you recommend like a silicone grease or anything like that to put in the threads of the large clamping "ring" that keeps it from locking up?

[@ClearlySeen]

Yes, you can use Greece to help it come off but typically if you need to remove it the easiest way I have found is to use a heat gun on the band after a short time less than a minute you should be able to cut it to remove it that’s if you’re going to replace of the shell or the band

[@2URLex]

Mine isn’t allowing water pressure to the Polaris. Could that be the valve or my actual water pressure

[@ClearlySeen]

Make sure your main pool pump is on when the Polaris motor is on

[@loamydirt8413]

Thank you.

[@thirumalaithathachary3111]

Sir, In a good working backup valve , should the water spray out of the backup valve continuously or intermittently ? I have a polaris pool vac that does not move at all and the backup valve is continuously ejecting water at a very high rate. so asking. Thanks

[@ClearlySeen]

The water should blow fully out of the backup valve for a short time minute or two then it should shut off if it does not the gearbox inside the back up valve needs to be replaced

[@ClearlySeen]

Flow

[@thirumalaithathachary3111]

@@ClearlySeen thanks a lot

[@alexvanzandt]

I got a new gearbox for my unbroken shell and I can't get the shell closed all the way. Unfortunately, you didn't show this part in the video. Does it slide shut all the way before screwing it together? It seems that there is only one way it can go do to the jet and slot.. What am I doing wrong?

[@ClearlySeen]

Anytime I had that particular problem the gearbox was not seated properly you want to make sure that it is seated as far down in the shell as possible and then make sure that the shell is lined up properly at the notch. Once that is in there right then make sure to screw the band on the thread all the way down. Hope this helps!

[@rayceballos8316]

Great video... Thanks

[@jim2611]

the cap split on my backup valve and they tried to sell me a whole unit. Then I checked the website and found that you can buy the screw cap on its own

[@user-tg9bd7xf3e]

thank you!!!!!!!!!!!!!!!!!!!

[@wattsobx]

how to you unscrew the oem case? I cannot get my undone.

[@ClearlySeen]

This is one of the main things that people struggle with I need to make a video but since the video is not out if you have a heat gun heat up the ring that goes around it that’s the main part. That’s hard to unscrew when you do, you can take a flathead screwdriver And since it’s heated up, you can break that ring pop it off and open it up with a screwdriver. If you do not have a heat gun you can use a handsaw. If you’re super careful, the object is to break the ring that goes around it.

[@sogent56]

How do you get that cap off?

[@ClearlySeen]

There is several techniques but it’s not easy usually if there’s a crack in yours already I use a tool to make the split larger you can use like a hammer and a chisel or a flat head screwdriver sometimes it can be very difficult I hear people say but it’s just prying it open is the main thing.

[@dr.samiquemarch-dallas7276]

How do you actually open the backup valve. Those parts are off video and I cannot figure out how to get the top off.

[@ClearlySeen]

If it does not unscrew you’re going to need to break it open I’ve done so with a screwdriver and hammer there’s no real easy way but if there is a crack he would just want to take something like a screwdriver and start there. If there is no crack something like a vice would work.

[@rayceballos8316]

It is difficult, but i was able to get it to unscrew using two "rubber strap wrenches"...

[@jq7216]

I unscrewed the ring (threaded), then separated the two main body parts by wiggling them back and forth (no threads)

[@davidwilley6385]

Where are the links you said were below for the backup valve parts?

[@ClearlySeen]

Polaris Back Up Valve Shell Only - amzn.to/2wegGy3 Back Up Valve Full Replacement Very Good Deal - amzn.to/3epnkm2 Polaris Back Up Valve Gearbox - amzn.to/2YBgtkG

[@peedee4065]

What is the function of the gearbox?

[@ClearlySeen]

To cycle the backup valve on and off. The backup valve comes on to pull the cleaner away from areas it may be stuck in.

[@peedee4065]

@@ClearlySeen Thank you for your reply! How does the sensing occur? What knows that the cleaner is stuck?

[@ClearlySeen]

It just comes on every X amount of time and then stays on for a certain amount of time but it’s different with each cleaner

[@peedee4065]

@@ClearlySeen Thank you very much. So if the cleaner isn't stuck it just backtracks a little, no harm done, but if it's stuck it can reverse out of that area. I've taken over our pool maintenance, so I've been learning as I've had to. These pool sweep cleaners are tricky little bastards, lol, but I'm grateful for the collective body of knowledge on the interwebs, yourself included. 👍

[@NeverMetTheGuy]

When pulling ours apart, the wide part was on with the force of God, so an oil filter wrench helped to loosen it.

[@billburkhalter411]

The threads are reverse.

[@TheMelegence]

Useful!

[@ludiblaceri6648]

I bought a new one, but it still won’t stop reversing

[@sharijackson3506]

Where can I purchase a gear box

[@ClearlySeen]

Polaris Back Up Valve Gearbox - amzn.to/2YBgtkG

[@JR-ze9gk]

Good info. Please spend $15 and buy a tripod, so you can keep your continuity!

[@ClearlySeen]

Definitely going to do that!

[@liuvids]

Fixed with just the shell

[@mikekelly571]

I could not get my valve apart. I was trying with 2 large pliers and the damn thing would not come loose.

[@ClearlySeen]

What I normally do is take a flat head screwdriver or chisel and a hammer or a rubber mallet and I essentially go to the crack and make it split directly at the broken area then I pull it apart. Yeah sometimes they are not fun getting apart. Also a vice can really help out.

[@manuelnoriega6551]

Hello. How can I know my Polaris model number? Thks

[@ClearlySeen]

If it’s a 280 it will have two water jets on the bottom if it’s a 380 it will have three is the easiest way to know.

[@billgriggs3426]

If you have a main pump and a booster pump it’s probably a 280 or 380. The 360 is powered by your main pool pump alone with no extra pump. I think it uses a fatter hose than the others but am not sure about that. The 380 only has three wheels, two on one side and one on the other. The 280 has a little wheel in between 2 big wheels on one side and like the other person said there is a different number of jets. If you Google “Polaris” and the model numbers you can look at pictures of all of them, figure out which one you have, find a manual, all that.

[@thomastruman4636]

Solid content, but why not Just replace the screw cap that is split for $15.99? The rest of shell appeared ok

[@ClearlySeen]

In the video there was a hairline crack on the shell as well as the screw cap. Thanks for letting me know about the screw cap being $15.99 because I’m sure people will run into just that so they will know.

[@efrawley55]

Your Amazon links dont work

[@ClearlySeen]

I just clicked on all three of them and they loaded for me have you tried another device or computer?

[@JT-jg8le]

This video is at 61k views now. Can you please tell me how much money you've made so far with this video? Profit from all possible pay outs. I am considering posting videos like the one you have here, but Id like some real life data from a real life person that gets as many views as you did with this video. I will greatly appreciate your response.

[@edwardgrier7096]

Please by a camera stand

[@genevievegonzales1990]

This just happened and I wasted 80 dollors

[@ClearlySeen]

Sorry to hear. I always hope people will find this video before paying alot at the stores.