Polaris General XP4 upper door install! Polaris brand doors.

[@m.stewart2352]

Nice man, great looking rig. Try and get some video on where you're doing the insulation. I'm curious where are some good spots to put it! Thanks dude. Great vids as always

[@m.stewart2352]

@@jhmotorsports7692 awesome dude! Keep the vids coming

[@davelevesque2050]

Nice install.. got the same ones on my 2021XP2 and with a bit of tweak they fit real nice.. the 2 corner piece I did the same notched them out it does the trick and barely noticeable.

[@davelevesque2050]

@@jhmotorsports7692 where did you get those clips that goes under the windshield? mine keeps coming down about half inch overtime of riding.

[@ghiapower3908]

great machine, if you didn't glue the gasket would it be easy just pull em straight up if you want to ride in summer with out em

[@chrissheerman]

That tip in plate is the same part if the plate the tube is welded to is identical then if you flip it over its the same part so it would be same part and part number customers just has to be smart enough to mount it so the tube is facing the side, they need it to.

[@that_yooper_general5200]

Looking great man

[@that_yooper_general5200]

@@jhmotorsports7692 always brother!!

[@mrmd8819]

Subd I have a 22 xp4 pursuit and have been wanting a heater and full doors

[@josephignatowicz1709]

What front and rear windshield and back glass are you using?

[@jeremylovold6812]

I just did that same thing last weekend. How do you remove the front uppers if you glued the weather stripping to the door?

[@MeTrying2Tri]

Quick question, around the 8:20 mark you talk about the corner pieces being an issue and I'm running into the same problem. What did you end up doing? Did you notch the pieces out for the window bracket??

[@jhmotorsports2]

Yes I had to notch the inside of the filler panel to clear the windshield lock.

[@manwithoutastar]

I’ve got those Oem doors ordered, will use this vid for install thx! Do you get any movement in that led light bar because of those brackets? I’ve been told they’re too flimsy

[@drewwagoner1235]

Installing my doors this weekend. Good details about leaving weather stripping on there however, I did see some concern for when you want to remove when trailering or summer riding… tips/tricks?

[@jhmotorsports2]

They come really easy. Thanks for watching.

[@gthomsen180]

Great video. My concern with these upper doors is wanting to remove them for warm weather and compromising the "seal". Will you leave them all the time? What light bar is that on your General?

[@jhmotorsports2]

I actually do leave mine on most of the time. Only took off for a 6 hour trip on an open trailer to keep them safe. I think as long as they are stored well when off they’d be just fine. Thanks for watching.

[@jhmotorsports2]

Upper light bar is a 42 inch curved Auxbeam lower light bar is a 12 inch nilight.

[@joegracia77]

Quick question, why not just use Velcro on the doors for the seal versus super glue? Wouldn't that be better for taking the door tops on and off?

[@jhmotorsports2]

Where I glued it will still let the door come off.

[@rickhart8867]

Thanks for the video. I have the same uppers ordered and my 2022 XP4 has just arrived I'm told. Wondering if you think these are worth the "hype" as you stated when compared to the Spike and others?

[@jhmotorsports2]

The Polaris doors are the really only option on the 4 seaters. Tusk makes a set but they don’t look to good in my opinion. Thanks for watching.

[@frankjourney606]

FYI - I’ve heard of the zippered “opening” that you unzip to reach through to the door latches being extra small. Further searching on the internet, I found a company that makes a set of door latches that mount on the outside of the rear doors. Just thought I’d share my find!

[@jhmotorsports7692]

Great tip!

[@josephignatowicz1709]

Really nice job on the video. Just ordered a XP4 and maybe delivery by April. Besides expensive, what’s your take on the Polaris solid doors? Nice to see someone who is very particular in parts installations.

[@jhmotorsports2]

I’ve heard good and bad on them. Really expensive for what they are but I have no first hand knowledge.