Thanks for the information made a huge difference in my ability to figure out what the issue was.
@motomarck7749 Жыл бұрын
Great job have one in shop now with same issue, they use for plowing snow.
@gagestroney96093 жыл бұрын
Having the same issue. Tore it down and that gear is the culprit. Thanks for the video.
@atvrepairsandmore24823 жыл бұрын
Glad I could help. I figured I wasn’t the only one with this issue and there was no information out there about it
@RobbieWilletts-q2nАй бұрын
Great video. Question for you. Friend towed his Polaris Ranger 570in neutral about a mile and a half. He heard a bad noise. Now it doesn't go into any gear. Any suggestions would be appreciated.
@Jwelch12082 жыл бұрын
Your video was a great help. Very informative. Thanks man.
@atvrepairsandmore24822 жыл бұрын
No problem! Thanks for watching
@chrisharris76374 ай бұрын
Good video!! Whats the part number to the gear you replaced?
@boblabla69322 жыл бұрын
Great video. I have a 2019 with the same problem. Going to tear down this spring and fix
@atvrepairsandmore24822 жыл бұрын
Thank you. It’s not to bad of a job. Just takes a little time.
@QuantumOfSolace19 ай бұрын
Yes - ours does the exact same thing - it grinds sometimes - and sometimes it works! These ATVs are far from tough - right?
@farmallsmith7938 Жыл бұрын
Great explanation!
@motoxjosh29 Жыл бұрын
i wish you wouldve showed the star detent new vs old. im going to buy both and see if this fixes my issue. the roller pawl definitely broke on mine, and im hoping the detent upgrades fixes it. thanks for sharing
@atvrepairsandmore2482 Жыл бұрын
If I knew how popular the video would be I would have spent more time on it but I was in a rush at the time to get the transmission back together
@evandavies2041 Жыл бұрын
Thanks . It has been an issue and Polaris does not cover it on Warranty. Just have to use it in forward until I get the time to fix it. What would you estimate the cost to fix it at a garage. How many hours. Thanks.
@atvrepairsandmore2482 Жыл бұрын
I’m not sure on the price, but I had imagined probably be somewhere between five and ten hours of work
@Rocksinthedriveway2 жыл бұрын
Great job, this will help
@ccpirogue2 жыл бұрын
Could this happen in High gear as well? My shifter flooded for Ida and now the shifter is real stiff and High gear grinds now.
@atvrepairsandmore24822 жыл бұрын
I would take the cap off where the shifter goes into the transmission and make sure nothing is rusted and frozen in there. Also flush the transmission a couple times with new fluid. The other thing it could be is that cable got water in it and the inside of the cable is rusted and will not let you fully engage high. I would take the shift cable off of the transmission and manually shift that lever into high and see if it works. If so, then you know the problem is not in the transmission
@ccpirogue2 жыл бұрын
@@atvrepairsandmore2482 Ah thanks! Great tips thanks for your time!
@stanglidewell891510 ай бұрын
Good job on the video dude! I think I will take my 2005 500 apart and build the cogs up with a welder.
@ScottieMyers8 ай бұрын
Part number for the part that goes in the front of the case ?
@BorgesBuilt2 жыл бұрын
Thanks for the detailed video. By chance was this machine flashing the "R" while it was trying to engage reverse? I have a 2016 RZR XP 4 1000 that is a bit noisy going into reverse and flashes the "R" gear indicator the entire time I use reverse. My brother has the same machine but a 2014 and his gear indicator is solid all the time. Thanks for any info.
@atvrepairsandmore24822 жыл бұрын
I can’t remember if it flashed or not. I feel like it didn’t. If I still had it I’d look for you but I don’t unfortunately. They might have made it flash in reverse as a safety feature so you can tell it’s not in forward but I’m not sure. If you are in a Facebook group someone there might be able to tell you. I haven’t had any new rzr so not sure if it’s normal.
@em5203 жыл бұрын
I’m dealing with the same issue on my ‘13 ranger crew 500. I’m not a mechanic by no means, but I’m going to give it a shot. I’m in the process of removing the transmission. How difficult wouod you think this rebuild would be to a intermediate person like myself. I’m wondering if my transmission is the same as your 570. It looks identical.
@atvrepairsandmore24823 жыл бұрын
It is not really difficult just really time consuming. I would watch some videos first and see how you feel after watching the.
@ricardojaramillo9072 Жыл бұрын
Hi, can you fix my?
@wandamonks80012 жыл бұрын
2007 Polaris rzr 800 grind when going into gear?
@atvrepairsandmore24822 жыл бұрын
Haven’t had to open up a 800 transmission yet. Probably a shift fork issue but maybe try and and adjust the linkage
@daltondean5622 жыл бұрын
Your shift cable could have been out of adjustment resulting in it not going fully into reverse, eventually wearing the lobes.
@atvrepairsandmore24822 жыл бұрын
Possibly. I bought it from the original owner and it was broken when I bought it. He said it’s done it since the day he got it and got worse over time and the dealer could never fix it.
@bmxjason13 жыл бұрын
where are you located?
@atvrepairsandmore24823 жыл бұрын
Houston
@ourd0gseven Жыл бұрын
At times trying to find "Reverse" perfect on my Polaris Rzr, I have to first put it in park then slide into reverse, or sometimes it doesn't quite engage...must need adjusting in the shift cable or something.
@atvrepairsandmore2482 Жыл бұрын
I would try to adjust the cable first
@ourd0gseven Жыл бұрын
@@atvrepairsandmore2482 Thanks, I'll give it a go..