PolarStar Airsoft - M249 Para "Featherweight", F2 Installation

[@rcairsoft322]

Great vid guys. Rodd, you really show how well you understand the platform and the install. props

[@trumanunruh1828]

Don’t know who you are, but I am subscribing because I was looking and looking because I can’t figure out how to take the motor out and you finally showed me. So thank you so much.

[@BryanHectic]

Rodd, I know you're no longer with Polarstar, but this was a solid, straightforward write up on the f2 install. Just got mine set up on my Featheweight and so far it's great!

[@ToolTimeTyler]

Fantastic vid 👏 👌 👍

[@Sean60bi]

just got a one of these, need to HPA it at some point in the future

[@joefoe2329]

@@werewolfbishop5465 high pressured air

[@Buster1276]

DSG it do NOT polorstar!

[@MrKilluuuu]

They change how the spring comes out it has a plate with a hex covering the quick release also they put a photo sensor trigger better quality . They added a second small screw by trigger board that holds a plastic plate in other side of gear box. The gears are good the electronics are good cant bit this gun for price but yes I am putting a jack on it with m60 nozzle

[@robertkennion9020]

Fyi to make the hopunit/inner barrle and outer barrel easier to fit...cut thr spring down thats in front of the hop unit by a centimetre/half an inch. Also this can be front wired so run the cable along the side of the gearbox and down under the trunion for your electronics

[@codycoyne3630]

Would this whole process apply to the A&K MK46 as well? If not, could we see a full video on that?

[@DYNAM0-504]

Is there a way to get the gearbox out without cutting off the motor?

[@DankTank374]

Waiiiiiiit so that gun has a v2 gearbox on it ? I have a valken v12 that I would like to do something with either an smg or lmg set up somehow. Not the best engine of accuracy lol

[@jarod6298]

"Hello, if I have this replica but want to install a fusion engine system instead, does the nozzle and M60 also fit?"

[@grantmurphy7785]

Great tech content. Really looking forward to more kythera updates! And is that CNC noise in the back ground?

[@dmaff06]

yes .. yes it is..... AWESOME CNC machines getting to speed :-)

[@theslavicllama3565]

What nozzle do I need if I'm gonna do this with a jack?

[@josephramos7613]

#14

[@denkz]

Is the #14 nozzle works on Cybergun FN Licensed M249 "Featherweight" Airsoft Machine Gun (Model: MK46 / 400 FPS) ??? Thanks!

[@pedroocasio4272]

Does this setup apply the the cyber gun A&K mk46 they are basically the same thing inside only thing that’s different is the cosmetics can you confirm this ?

[@MrHellmeowmix]

Well i know what I'm doing this weekend

[@jhqtech]

If you set the fcu settings to semi lock you could in theory have a semi only 240 right?

[@PolarStarAirsoft]

Yes, you certainly could do that if you wished.

[@bangerairsoft4086]

do you guys have an install video for the real 249 fusion engine setup?

[@bangerairsoft4086]

in a metal m249

[@JaguarWarri0r1]

@@bangerairsoft4086 they don't. I was thinking about making one though. I have a fusion engine in my long range M249

[@seanw8643]

@@JaguarWarri0r1 what nozzle did you use on the fusion engine? I’m about to do this set up once I figure out what I need

[@JaguarWarri0r1]

@@seanw8643 if you have the metal and polymer A&K M249, the fusion engine drop in comes with the correct nozzle. Which I believe is a number 3 nozzle. For a featherweight m249, use a number 14 nozzle

[@김창한-b4w]

잘보고갑니다 고생하셨습니다 👍

[@royreiter4501]

Do I just need to use a fusion engine M60 nozzle to get a fusion engine working in it?

[@pedroocasio4272]

I followed every step and I can’t get it to shoot it doesn’t even do anything and everything is brand new what’s going?

[@BigBoss-tn6fn]

This whole video is ASMR. Also does anyone know if this F2 engine will fit inside a PPSH gearbox? I saw someone on reddit who said they put an m249 F2 fusion inside a PPSH with minimal modification to the gun but havent been able to find much more information on the topic and I have an old PPSH just sitting around that doesn't work anymore unfortunately.

[@TheSuperR6]

Can this use with A&K M60e4 guys !?

[@J7891-x1c]

I’m really new to Airsoft and want to do this build but, I was wondering if there’s any other good alternitves that work for this gun that are, or aren’t, polarstar and aren’t over $300.

[@cheddarcheese8255]

year late but sadly no, hpa is very costly but is also very worth it. keep in mind you can get the same performance out of an aeg if you get good parts for the gearbox

[@kyleurscott3303]

When using a PolarStar fusion engine does anyone know what unit you buy for the featherweight m249 there is a profit for that gun but it doesn't seem to be the proper link without buying it when testing it to make sure.

[@hardbap]

I put a Jack in mine

[@dmaff06]

Sweet

[@scotthayes2324]

Does the PR-15 v2 gen 3 work in this gun?

[@bradenc1216]

Scott Hayes yes

[@gamingcube4237]

@polarstar airsoft what settings would you recommend for a jack to make the stock box mag keep up with a good lmg rate of fire??

[@PolarStarAirsoft]

Your rate of fire would be limited to the feed rate of the magazine. You would have to adjust your rF setting until the ROF is synced with the feed rate of the magazine.

[@skillexdub6906]

@@PolarStarAirsoft For polarstar jack i need the nozzle number 14 for m60

[@Ulfstigandr]

@@PolarStarAirsoft continuing on this train of thought. How low can you adjust the rof on this and the jack? Im wantin as low as 15rps with 450

[@DankTank374]

Nozzle looks super long tho

[@wakurjunior1924]

What nozzle do you need for this and can I get a link to that nozzle

[@grillbar4]

#14 Nozzle (A&K M60) as it says in the video and the description www.airsoftjunkiez.com/polarstar-f2-nozzle-m60/

[@kyleurscott3303]

Which one would you need if you were using a fusion engine?

[@BluboxBattleSquad]

Hello there ! I'd like to buy this replica, but I've got a question. I've got a FE v2 on my M4 replica, would it fit in this m249 whithout any issue ? With the A&K M60 nozzle ? Thanks you !

[@JohnGreyman]

Where is the link to your store?

[@PolarStarAirsoft]

We're actually a manufacturer. Our website is www.polarstarairsoft.com.

[@JohnGreyman]

@@PolarStarAirsoft Thank you very much.

[@Buster1276]

DSGs are better!