Pole fishing // Fitting side pulla kits in minutes // Vespe

Rikki Richards takes us through a step by step guide on how to fit pulla kits in your fishing pole top kits.
For more amazing video fishing tutorial videos please subscribe to our channel here www.youtube.co....
Your support will help us create more videos in the future.
Top Kits used: www.daiwasport....
Pulla kits used: vespe.com/shop...
You can find more information about Match Fishing Masterclass including helpful tips and fishing advice join us at any of the social media links below.
Join our facebook group where you can ask questions and engage with other anglers who share our passion for fishing. / 87602. .
Follow us on Instagram - / match_fishi. .
#matchfishing #coarsefishing #anglers #matchfishingmasterclass #matchfishingguide #matchfishingtutorial #fishinghintsandtips #carpfishing #bigcarpfishing #maveruk #maversignaturefishingrods #howtofish #beginersfishing #advancedfishingtechniques

[@jasonlaverty76]

Way better than PI Pulla systems as there are NO moving parts to get crapped up or fail. The simplest systems are always the most reliable. Good clear instructional video Rikki.

[@The1vanillaman]

i watched this vid last month,ordered one from vespe and fitted it , doing just as you did it turned out perfect,have ordered another 3 to finish the rest of my top kits,so much neater than a cut piece of old pole.that my other two tops had, many thanks Rikki, great demo

[@DaveMarshall-hl3gh]

absolute brilliant video and product buddy thanks, may extend the life of the old pole

[@jaywatkins8586]

Genius product great work on showing us how to use it Rikki

[@iansherwood5357]

Just switching to side pullers now and these are on my shopping list, easy as you like from the video!

[@matthewralph6437]

Well presented..Will get some

[@llohcire]

Thanks Rikki, Great instructional video mate.

[@brianwelbourne9896]

For the old type side pulls kits I just used to slide a bit of old pole (Cut about 50mm long) Glue in place then put in the side pull. This seems to copy that idea but at an angle so seems brilliant.

[@martinhehir1471]

Awesome video Rikki bud just purchased some so here goes lol

[@davep6286]

Very good, the tournament could be back out, with its own tops👍😎

[@grahamwalker139]

What a great product. Thanks for that Rikki.

[@colinjwilliams6149]

Brilliant video!!!!🎉

[@garyrimmer5512]

Absolutely brilliant

[@adrianbird3241]

Hi Rikki they seem a great effective idea, it says the 6mm kit fits 15>18mm top kits, what diameter are your kits roughly where the plastic tube stops, mine are only 16mm at very base.

[@matchfishingmasterclass1247]

im not sure mate but i have a daiwa pole and they are one of the slimmest top kits on the market i believe

[@markwatson5244]

Whats the ideal distance from the bottom of the top kit to fit this? My pole is quite thin and it sits around 4 to 5 iches from the bottom, 3rd section fits just below where the hole will be drilled. Is it worth thickining a section further up to allow more distance from the bottom ?

[@briannorton2676]

Really good video

[@domgarofalo4335]

Hi Rikki - love the videos subscribed! Just wondering do you run carp elastic through these kits or is it mainly for silvers? Wondering whether to get this or go down the wrap route - I’ll be fishing for f1s and carp mainly - cheers

[@matchfishingmasterclass1247]

I run carp elastic through them aswell mate but i dont go above a 13 hollow as these are match kits and i wouldn't be using them for anything bigger than that even without the pulla kit fitted.

[@andrewfoden7786]

Great invention but would it be better glued in position to create a perfect and permanent bond.

[@matchfishingmasterclass1247]

no need mate

[@lespaul8236]

Its a shame the website listed to buy these is NOT secure. Does anyone know where you can buy these kits safely? Thanks

[@leegeldart1978]

Hi Rikki did you ever encounter any issues with these such as the top kit cracking/snapping around this fitment? Thanks

[@stevehickling7435]

Absolutely bang on that rikki duck. Where sells them.

[@matchfishingmasterclass1247]

vespe.com/shop/puller-kits/side-puller-bushes-drilled/stripper-side-pullers-wrap-drill-6-0mm

[@williamstones6415]

What is the inside measurement of the sleeve please

[@kevsmith060]

I use these strippers but wouldn't without a carbon wrap. The plastic sleeve isn't bonded to the carbon so offers little structural strength. For the sake of £10 I get all my kits wrapped.

[@davep6286]

I like this idea too. kzbin.info/www/bejne/r3jWmKeNaa-Dr8k good price, think you’ll agree.💪👍

[@Adam-hr7vs]

although there's nothing stopping you gluing it or even gluing a scrap piece of carbon

[@carphead2009]

Thanks for the video, i might try these in my old xrs and use as a margin pole. Just be careful not to breathe carbon dust😷

[@davidjessop6867]

Hi rikki looks a great idea does the drill come with the kit

[@matchfishingmasterclass1247]

it doesn't but its worth getting at £4.99 so you know you have done it correctly

[@davidjessop6867]

Match Fishing Masterclass thanks Riki where can I get one

[@carlwellington6197]

Hi mate what are these called and have you got a link were to buy one thanks

[@markgarner3045]

Are these genuinely any good ? as the pole I have won't even allow me to fit a puller bung as the next section of pole goes too far up the top kit so these would be a good alternative if there worth it ?

[@grahamhill3357]

When are thay back on sale in uk

[@christopherjackson5275]

just had a brake on these . gone have to fix with wrap and glue

[@matchfishingmasterclass1247]

You've not pulled it down far enough as i said in the video mate. Ive been using these over 1 year now and not had a single issue.

[@takleteck7008]

Following on from the question by Adam - what is the internal diameter of the tube? Or what is the pole diameter of the pole at the position that the tube locks?

[@ralphcutler7622]

Hi Ricky are vespe still doing these kits with the support collar ???? Been on e nay but picture doesn’t show it Had no response from sellers Tight lines Ralph

[@matchfishingmasterclass1247]

Hi ralph, ive just been on their website and it looks like they have sold out mate.

[@craneyc993]

Nice bit of kit that mucca ta much

[@vincentbutler5343]

Rikki have you got a link for the 6mm drill bit cheers

[@matchfishingmasterclass1247]

vespe.com/shop/puller-kits/side-puller-bushes-drilled/stripper-sanding-bits

[@Adam-hr7vs]

Great video. How have you been getting on after a year? Looking at the 'tube' part only, how long is it and how does it differ from the tough black plastic conduit tube (20mm OD, 18mm ID) that you can get from wickes for £1.30 for a 2m length?

[@matchfishingmasterclass1247]

Product is absolutely brilliant and im really happy with it. The only problem is they sold out of the product off the back of this video so i cant get anymore now hahaha Typical.

[@Adam-hr7vs]

@@matchfishingmasterclass1247 That's why I asked if it's any different to external plastic conduit?

[@Rat_red]

Hiya, could i use these on a power kit?

[@matchfishingmasterclass1247]

Yes you can mate

[@michaelgoldsmith4888]

Will these fit any pole toconvert please ?

[@matchfishingmasterclass1247]

Yes mate

[@michaelgoldsmith4888]

@@matchfishingmasterclass1247 thans for the prompt reply..regards michael

[@steveellerby6986]

Any one used these on shimano kits? Anybody had issues with pole breaking?

[@rbtbgn]

nice

[@ianmurphy2811]

Where do you get them as I can’t find them anywhere

[@matchfishingmasterclass1247]

vespe.com/shop/puller-kits/side-puller-bushes-drilled/stripper-side-pullers-wrap-drill-6-0mm

[@ian-uk9673]

you use a pole that dont have side pulla kits, dude you full of shit go back check your video's showing your match fishing video's your pole has side pulla kits not one shows you using a pulla bung. still this is a good product for those that dont have side pulla's already fitted although id be worried about the angle of the ptfe bush damaging the elastic if it had a slight curve in it to centre the elastic down the middle of the pole this would be an improvement. me im buying the carbon strengthening kit and fitting roller pulla bungs by preston to all my kits. you pay for a cheap quick fast fix, it will cost you more in the long run