Polish Angel Glasscoat Cosmic V2!! (1-2 year coating, 9H grading)

Polish Angel Glasscoat Cosmic V2 is not a traditional semi permanent coating...but is as close as one can get to it. A creamy consistency of a sealant, but the protection of an entry level coating. Perfect for those that want to avoid the hastle of a professional coating. Today, we pot Cosmic V2 through the Apex Detail Review Process.
Polish Angel Glasscoat Cosmic V2.......www.autogeek.n...
Other Polish Angel Sealants......www.amazon.com...
apexautodetail.com
@apexautodetail (Instagram)
@apexautodetails (Facebook)
@apexautodetail1 (Twitter)
#apexdetail #cosmicv2 #autodetailing

[@apexdetail85]

New mic...remote, so many adjustments can be made. how does it sound? too loud...soft...distant?

[@jimboh5131]

Brian... I think the settings are spot on... sound as if we're in the room with ya. Thanks for the review as well; I've been wondering about this having only used Opti2.0 and McKees.

[@gkiferlt1]

I was going to comment on this, I think it worked great.

[@GDavis49]

Sounds good to me.

[@D9412G]

I thought the sound quality was just fine! You could have fooled me not knowing you were using new mic.

[@CAPTJ696]

Great review Brian. Paint looks like glass. Vehicle ready for a car show!

[@rubinlogan1540]

"Part of preparation..and preparation is key" love it

[@apexdetail85]

YES!!!🙂

[@seabrew1]

Applied V2 on my front clip about a week ago. DIYer thats very new to polishing. Cosmic V2 lived up to my expectations, its really good. it looks like glass on my blue car.

[@tonymattisson6158]

Just to note that for durability the Invicible Primer or Spritz is very important to use as a combo with Cosmic v2 coating. And also the little harder surface but that is not as important to get up to the 18-24 months longevity from it. If going from a polish and even sometimes a compound step. The abrasive in Invicible Primer is awesome to get the finishing polish step to look awesome. You can get away with polishing cutting pad and Invicible Primer for one step as a cleaner wax would. Couple the esclate lotion and polishing pad and finishing with Invicible Primer on a finishing pad and you get an awesome finish from light defects as shallow wash marring and such. Also with this combo you go straight to application without the need to be panel wipe product wipe down before application. Awesome video Brian! Like the beutieful finish on the vette. If you ordering directly from Germany you can get the Cosmic v2 coating color matched to the vehical you are applying it on. Don't know if it will be doing very much but a little difference can be worth for some. The carnuaba flakes in it they dye in some way I think LOL. Would be interesting to test if it has a little self healing ability as it's claimed on the product here in EU. Thanks for shareing your work and your experience Brian! You are top notch in KZbin detailing channels!

[@PeteyMcSavage]

I have purposely not bought any polish Angel I didn’t want to dip a toe in because I know I would love it and buy half the line!

[@spirokaci]

Hahaaa.....you will love it. Stay away. I ended up buying PA and I can't help myself. Happy,tho

[@apexdetail85]

I am a detail product junkie...I couldnt stay away.😜🙂👍

[@spirokaci]

@@apexdetail85 lol....I know who you are and believe me I have'nt missed a video of yours. Gentelman and thanks for your time.

[@dcarrstar7719]

Big fan here... Brian just gets the way we want to see detailing explained.

[@felixf5211]

I just may get this. Have a job coming up: red car, the client is not comfortable with a semi-permanent coating, wants the best possible products used in the detail. I bet he'd love the Polish Angel hand made to order process.

[@apexdetail85]

It would be right up his alley.

[@themachine8009]

Hi Brian. Great video. Can’t wait for polishers and foam pads series.

[@jasper_north]

Oh boy...I bought it for my XC70. It is super easy to use. I have about 10 products of PA. Very expensive but the best out there. Handmade. Lovely. Used SNOWCAKE on my wifes FIAT 500S for example. I did use the invincible primer followed by V2 and then the SPRITZ.

[@edcamden2571]

Fairly new to the channel but I love the diversity in what you test out; great change of pace from some other guys that merely regurgitate manufacturer talking points! I’ve loved using PA Cosmic Spritz as a topper and am looking to try out either Cosmic V 2.0 or Viking Coat on my next car this summer and would love to hear you talk about each; 6-12 months longevity is fine, I’m after the best look mainly. Thanks!

[@Clint_L]

Great video my friend. Love the new mic. Audio sounds great. The Vette gets em wet.

[@apexdetail85]

Cheers!

[@60trickpa]

AWESOME !! The new Mic sounded great and as always a fantastic informative video. I don't think the cost is that bad considering what I paid for Angelwax products. Another great product to keep in mind in the future. Thanks Brian for once again giving all of us great information.

[@apexdetail85]

And if you wait for autogeek to have 25% of...👍👍👍

[@60trickpa]

They just had had that :) @@apexdetail85

[@danmorrissette4814]

So many products out there!! its mind bogling !! and fun at the same time !! loll ps.new mic sounds good !! Thanks for video !! PS...CORVETTE LOOKS AWESOME ~!!!!

[@apexdetail85]

Great for us! More to choose from...and competitive prices. win win.

[@alau0115]

I wish this kind of informative video had existed when I was using Polish Angel Cosmic (ver. 1) five years ago. It was a small step from wax and sealant. The buffing was extremely easy with Polish Angel MF (yellow, very fluffy but discontinued and replaced. The closest one is the Rag Company Eagle edgeless) . One thing to add is you need to use Invincible Primer or Invincible Primer Spritz before applying the Cosmic if you want to have the claimed 9H hardness.

[@RayD600]

Love PA Glasscoat Cosmic and most of the PA line up. Great review Brian. I use it on a few customers cars but agreed some special ones mostly:)

[@nc.detail]

Very timely since I was going through all the polish angel products on autogeek since we get the IGL discount 👍

[@bigd9848]

Beautiful finish and I agree you must correct the finish first. You will really appreciate the look after a great cleaning and correction. I see many vehicles from a few feet away the gloss is blinding.Up close I can see many imperfections,love marks and swirls.Looking like a diamond 💎 you do excellent work ✊

[@dpxprhulc4xkl]

Been waiting for so long for this. Thank you for making this video, Brian

[@GDavis49]

With that packaging I expected a mint or some chocolates to be included.

[@apexdetail85]

Tell me about it. 😂

[@shaunjones7234]

Great honest review Brian. Does look like a great product.

[@Dundertaker1]

Like the data with your meters. Shows empirical evidence of improvement, etc. great job. Mic is a little “flat” sounding...maybe distance?? It’s not “bad”...but I’d suggest trying different positions to see if you get a less muted/chesty sound.

[@fiddycaliber947]

Did those IGL banners just go up? Does that mean IGL content :O Awesome as always Brian, love the new mic too.

[@mikeyp2447]

Scott Munning those have been up for quite some time.

[@fiddycaliber947]

@@mikeyp2447 Damn i must be blind..

[@apexdetail85]

I have had them up since I moved in. I will showcase some...yes.

[@Travisg5]

Mic is great but the new intro is sweet always awesome information man love the angelwax line yes it’s pricy but u get what u pay for.

[@lewiswilliamsjr1190]

I like the cosmic products you say it is deep pocket with the red looks good, now I’m thinking a white

[@1christophe1]

Love the attention you give to this brand this is the one And only brand I trust my Money on just overwhelmed and off course the angelwax line up xp

[@MyGuyKirby]

Audio was clear the entire time. Question, this would be similar to Optimum Gloss Coat as far as price is a match and it is easy to apply. Would this Polish Angel product be a competitor if you only did the one coat? Time and performance is key to selecting any high-end sealants. Thanks for your video series.

[@apexdetail85]

I think 2 coats is a must here. You can get 2 cars done with this little bottle.

[@tommartin1223]

Incredible as always

[@rafaelreyes9474]

Great videos the best I’ve seen so far

[@chadj8349]

Amazing how it works and hazes like a wax

[@mikeyp2447]

I love PA coatings!🙂

[@richardseem7948]

look awesome good friend. another great video again buddy. 🍻🍻

[@gregwayne6785]

After 3 years, how does this product rate when compared to new product introductions? Lots of new choices.

[@beeslandscaping]

Thanks again great 👍🏻 video. I like your videos because you explained it very well

[@joeydny5816]

I am going to use this hopefully this weekend. Before i do i am going to polish using a sonax yellow pad and sonax perfect finish, what is the best speed for a quick 1 step polish the car is in very good condition minor towel marks only.

[@craig.encinitas]

How’d it turn out?

[@joeydny5816]

@@craig.encinitas Its a great 1 step , i have used that combo a few times already

[@russelstender8602]

Brian the mic is Awesome! Is that a new Rupes your using, and is the Nano next? Did they turn you to the Darkside? Lol Great info as always.

[@apexdetail85]

Old Rupes...giving my other polishers a break for new brushes. Tune up time.

[@alain0210]

Hello, what is the expiry date of these polishangel products? Can we keep them for 6 months without using them or less?Thanks

[@spookypunky]

So, we would clean, polish, then use this first? And up keep with either Spritz or High Gloss, right?

[@jayedge2272]

Is it really worth the cost vs some other sealants, or enthusiast coatings. At close to 200 for the kit , its hard to swallow that amount.

[@jamesbiedlar590]

No need to buy the kit. What he used int the video is around 69$

[@atambomb2376]

@jay edge I actually just picked this up last week when Autogeek had their 25% off free shipping sale for $56.

[@lockcracker]

172 views in less than a hour. 👍

[@kikcodog]

What's the benefit and drawbacks of a product like this vs say a Cancoat or a Moonlight? When they call it a Glasscoat does that means it's chemically similar to the original simoniz Glasscoat? BTW, that Vette was one of my dream cars growing up. The car I'd look for out the window on the highways and dream, "some day" Is that yours Brian?

[@chadbroad4648]

What are your thoughts on Viking Coat? I bought some and haven’t used it quite yet. Your detailing videos are some of the best around keep up the great work.

[@apexdetail85]

Viking Coat is coming up...stay tuned!🙂

[@franksattler6053]

@@apexdetail85 I cannot wait to see that. I am on the fence about getting the Viking Coat and now you have me thinking about getting Glasscoat Cosmic V2 coating.

[@Amor1990]

How can it be something easier to apply than a coating when you do it twice?

[@user-cb4nh7ze1s]

Decisions, decisions. I'm doing the full paint correction on my car in two weeks. Debating on which sealant/ceramic to use. Looking for protection/gloss

[@gaycha6589]

Great video. Can this go on top of Gteq CSL base coat applied to new car? I want an alternative to Exov4 and am thinking Cosmic glass coat plus cosmic spritz look ideal. Oh, and will a megs sodt foam black pad be ok for DA application? Many thanks

[@JCKICKS213]

Hi I have a question. After polishing with both polish angel master compound and master finish. Do you need to degrease the car with a product like Gyeon prep or do I just apply the polish angel primer after finishing the polishing work? Please let me know if I need to degrease the paint work before applying the polish angel primer!!! Thank you 🙏

[@rwmagnus]

Gotta give ya props on the polishing prep on that vet. Paint looks amazing. Waiting to hear more about those new lights. Why not do the second coat with the polisher?

[@apexdetail85]

The polisher would be a bit much for the second coat 2 hr later. A lighter touch by hand would be much better for coat number 2.

[@mainetomass99]

Anyone know what’s going on with Polish Angel USA? Orders have been hung for weeks. Travis doesn’t return calls. You can’t even leave a voicemail. Emails to the company go unanswered. I’m about to call my CC company to get my money back. So strange. Thread on Autopia about it as well. Any ideas out there? Thanks.

[@pjgravely2896]

Whata the difference between angelwax and polish angel. I currently use pinnacle souveran and I love it but wondering how does pinnacle souveran stand up to polish angel or angelwax. I do not want a ceramic coating, I also like waxing my car.

[@nickv9955]

What do you use as a drying aide after washing once you applied V2?

[@jims69camvette]

can i apply this product right after a brand new paint job without decontaminating the car ?

[@GBxDynamiicZz]

Would you be able to try out the OPT opticoats, also their polishes and pads ? It seems almost too good to be true, their coatings seem extremely easy to apply, and they also have spray polishes ?

[@apexdetail85]

And spray protection film...which I will be installing. Yes...I will cover them.

[@chadj8349]

Does that corvette already have a ceramic coating or just cosmic V2?

[@tommartin1223]

How much gloss does your meter go up when kenzo is applied

[@robbyrockets1]

Can this be applied over top of STEK Dynoshield like some ceramics? Thank you

[@harrym.3703]

where do you get such an order swindle

[@JustLikeGreta]

Great video

[@jamesbiedlar590]

Great video....sounds fine to me.

[@BUZDRIFT]

Man that red, fkn delicious!!!!!

[@nicorallysport]

Gloss 🤩 👍

[@michaelcherry6010]

Is this stronger than qp-on or would you put this in the same category?

[@apexdetail85]

A step up from qp on.

[@Michael22300]

How would I go about removing the coating at the end of the 12 15 months? I'm interested in this coating.

[@apexdetail85]

A cleaner polish.

[@TKsw191145]

What is the major difference other than price between the Viking coat and the cosmic v2?

[@apexdetail85]

Not much to be honest...another way for Polish Angel to make a buck. Slight tweaks in Sio2 and Tio2

[@jeffreyflayter9027]

Hi Brain, how is this stuff on trim or plastics if you get it on them

[@apexdetail85]

No worries whatsoever.

[@254JROCK]

Great 👍🏻 for personal use B my daily is worth it 🚘always gotta ✨⚡️✨✨shine,

[@PeteyMcSavage]

Can u put a drop on aluminum foil and leave it for a few days to see what happens

[@apexdetail85]

?

[@oscarbadillo3844]

@@apexdetail85 he meant to put a drop of it on his tin foil hat

[@Mrjozz011]

Brian, how does this compare to moonlight tac?

[@apexdetail85]

A small step up.

[@rchiuz01]

Is this user friendly for enthusiasts that don’t have a garage?

[@apexdetail85]

Yes...just find a shaded area.

[@alau0115]

I wish this kind of informative video had existed when I was using Polish Angel Cosmic (ver. 1) five years ago. It was a small step from wax and sealant. The buffing was extremely easy with Polish Angel MF (yellow, very fluffy but discontinued and replaced. The closest one is the Rag Company Eagle edgeless) . One thing to add is you need to use Invincible Primer or Invincible Primer Spritz before applying the Cosmic if you want to have the claimed 9H hardness.