Polishing the FX Superior Heavy Liner Part 1

Welcome to Airguns of Michigan, we are excited to bring you content based on Airguns and accessories. Our content is based on the best practices I know and how I achieve what I feel is the best at this time for me. Opinions vary and that is the best part as well can all learn from each other. Let’s have fun and grow together along the way.
You can get Patchworm kits and Balistol at High Pressure Pneumatics
Here are the links to the people we support and we hope you will also.
High Pressure Pneumatics
myhighpressureair.com/​​​
Ergo Air
www.ergoair.net/
Saber Tactical
sabertacticalinc.com/
Donny FL
donnyfl.com/
Accutac Bipods
accu-tac.com/
Arken Optics
www.arkenopticsusa.com/
RX Target Systems
www.rxtargetsystems.com
Monstrum Tactical
monstrumtactical.com/?rfsn=54...
Splatterburst Targets
splatterbursttargets.com/
Airgun Detectives
www.airgundetectives.com
kzbin.info/door/hSr...
As always please be safe and God Bless
Moose
music by audionautix.com
Track: JJD - Adventure [NCS Release]
Music provided by NoCopyrightSounds.
music by audionautix.com

[@bikerboywayne1]

Yes a quick polish is a must You are just hand finishing naw I have done that to every liner I have I used autosol metal polish I used string with 3 knots 1inch apart and put the polishing cream on the middle knot I do about 15 passes and that’s it There are many ways to do this This is my way Another nice vid Keep up the good work Wayne from South Wales UK

[@georgegandara6054]

👌👍I am always learning new things,congrats!

[@sambaaxe]

Looking forward to seeing the shooting tests of this. Thanks for sharing!

[@ezrabrook3993]

It works! But more polishing time!

[@FreeFloridaAirgunner]

Polishing has worked for me, and cleaning the barrel is so much easier and faster. And I did get about a 10% increase in FPS without adjusting anything

[@lucasmcdaniel9300]

10% really? Can you explain your method and materials!! I would love to get 10% out of my Texan!! Shooting 960 now if I can get 10% that would be amazing!! Thanks in advance

[@peteralexben]

@@lucasmcdaniel9300 its with a very low power gun maybe possible ,from 7,5 tot 30 joule i gues , because of the little energy behind it ,.with a high power gun i dont believe it

[@bobjoatmon1993]

I've noticed that my choke is VERY tight which seems crazy in a slug barrel! In fact as a big bore shooter I get my best accuracy in unchoked barrels. This choked .25 barrel just isn't performing like it should. I'd love to polish it open more but just can't figure out a way that doesn't damage the rest of the barrel. I'm seriously considering buying an 800 barrel and cutting it down to 700 to get rid of the choke. Note that after shooting over 700 NSA 36 gr slugs, I fire lapped the barrel by shooting 30 JB polish coated bullets, then cleaning. It did make an improvement in group size but again, I think the chokes the problem

[@dougdishler2086]

Great video bro !!! I used mother’s and a mop it’s coming together man thanks for the silicone tip bro it fixed front reg issue !!!

[@smokingunclefrank6037]

I've heard it's important to put the barrel tip agene something so it doesn't damage the crown like the wall you don't want it to come out the front of your barrel

[@lighttwigpan5772]

Thanks for sharing!

[@redgum1340]

Hey man, don't pull too hard, you'll turn that straw into a boomerang.

[@clubbyboi1]

When I clean mine I put a permanent marker mark on the top of the liner, so I know it’s going back in exactly the same as before, otherwise you have to zero it again 🤦🏼‍♂️

[@abitoutside]

Good tip

[@redgum1340]

Hey, does that mean it's bent?

[@threekblack217]

My zero stays the same regardless which way i put the liner back in.

[@DanielGarcia-zw8nx]

I do the same thing to my firearms 👍👍

[@abitoutside]

Absolutely 💯