No video

Polymer 80 PFS9: Combat Ready

  Рет қаралды 20,307

Armed Defender Gear Reviews

Armed Defender Gear Reviews

2 жыл бұрын

The Polymer 80 PFS9 is a solid handgun that is priced either at or just below Glock prices. Getting a Glock priced handgun with similar handling and manual of arms and also enjoying a lot of upgrades that normally costs extra, is a win in my humble opinion.

Пікірлер: 43
@jbblackley
@jbblackley Жыл бұрын
I was able to pick up one of these new for less than $350 (all in). The grip angle was not a "beware" for me, but a "thank goodness!", but then I am not a Glock lover. Very happy with mine. It really has some premium features for the price of far less than the Glock.
@WisSota_Boy
@WisSota_Boy Жыл бұрын
If you’re having issues with ejection patterns like the Glock Gen 3 does with spent brass ejecting back to the 6 o’clock position the solution is using Apex extractor and Gen 4 ejector, part #30274.
@poncho12335
@poncho12335 10 ай бұрын
I just picked up the full size in black $249.00 Happy! Happy! Three 17rd mags love it!
@vashmatrix5769
@vashmatrix5769 2 жыл бұрын
The double undercut is good but that stippling is main thing I like over the glock frame.
@2aeddie426
@2aeddie426 2 жыл бұрын
To fix the eractic ejection, swap out the ejector (keep the gen3 trigger housing) for a gen 4/5
@NukeTheWhales69
@NukeTheWhales69 11 ай бұрын
I hate premature ejection
@Go2Sleep87
@Go2Sleep87 Жыл бұрын
I like these pistols so much I bought the full size version & then turned around & bought the compact version during shot show a few months later 😆. I do know P80 will fix any problems you may have free of charge because I had an issue with a barrel & they replaced it.
@davidhr121
@davidhr121 8 ай бұрын
Just picked up one in FDE for $325 out the door! No optic cut.
@ICantSeeYourRepliesDickhead
@ICantSeeYourRepliesDickhead 2 жыл бұрын
Bought as my first gun as an aft kit, can’t wait for it to come
@frankfreda8570
@frankfreda8570 2 жыл бұрын
Clear nail polish on the pins will stop them from walking out.
@jimchambers7548
@jimchambers7548 9 ай бұрын
Good looking pistol, I agree with the billboards on the slide. I know what it is, hope I have as much good luck with mine as you have👍
@thelifeofCP
@thelifeofCP Жыл бұрын
Just bought this as my first handgun and ran about 100 rounds in 15 minutes. Only problem we had was a failure to chamber the first bullet on some mags. Couldve been the ammo though
@NukeTheWhales69
@NukeTheWhales69 11 ай бұрын
It will loosen up and run better the more you shoot it
@WisSota_Boy
@WisSota_Boy Жыл бұрын
Magazines are KCI Korean magazines with P80 base plate.
@mick5740
@mick5740 Жыл бұрын
Really? That is a let down that they would use those. Those mags springs SUCK. I sent back the ones I got. And iv heard the same I can’t believe they would use those mags for their pistol. I heard they are SGM.
@WisSota_Boy
@WisSota_Boy Жыл бұрын
@@mick5740 could be from a few different suppliers with P80 branding. I’d stick with Glock Oem mags for reliability for any Glock clone.
@user-tc2ud9fz3w
@user-tc2ud9fz3w 9 ай бұрын
Use a Gen 4 Ejector. It has a slightly different (less) angle and it kicks them out at 3:00.
@helidude3502
@helidude3502 2 жыл бұрын
Built a few myself. Very pleased. Have a couple problem children. But that’s to be expected with custom parts of various brands. 22lr to 50gi 👍😎
@donsal.t.1765
@donsal.t.1765 Жыл бұрын
I like the grip angle. What magwell did you buy for it? I am interested in buying one for mine, I've never used a magwell before and now I want to.
@danielpicquet1042
@danielpicquet1042 2 жыл бұрын
$379 at Bass, so I could justify the purchase, and can't wait to get to the range.
@Vntichrist
@Vntichrist 2 жыл бұрын
$319 on Primary Arms
@cindylambe4185
@cindylambe4185 Жыл бұрын
One important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?
@the.albertan
@the.albertan 2 жыл бұрын
I take it being a gen 3 clone you can't reverse the mag catch? That would be a deal breaker for lefties.
@ednogaski8806
@ednogaski8806 5 ай бұрын
Mine has been a problem child since I got it. Even tried glock mags still having problems , parts not right . Should of just bought a Glock.
@joemorganeatmyshortschannel
@joemorganeatmyshortschannel 2 жыл бұрын
Looks awesome
@ZE308AC
@ZE308AC 2 жыл бұрын
Nice
@dustinnorthington3157
@dustinnorthington3157 2 жыл бұрын
I've never had or heard of a glock doing that 😆 🤣
@sweetmeatbeatz3615
@sweetmeatbeatz3615 10 ай бұрын
I’d love to buy that p80 slide plate off u if u still happen to have it. 😂
@douglasphillips24
@douglasphillips24 2 жыл бұрын
Is that a build or a serialized P80 gun? If so where'd you get it? Nice looking gun & I really like the slide.
@ronniehorton5150
@ronniehorton5150 2 жыл бұрын
It’s a complete serialized firearm from p80
@christianvelas
@christianvelas 2 жыл бұрын
Would you take the p80 over the psa dagger?
@ronniehorton5150
@ronniehorton5150 2 жыл бұрын
I would
@RugerTSanchez
@RugerTSanchez 2 жыл бұрын
I’m doing exactly that. Had a Dagger Compact all done up (threaded barrel, suppressor height night sights, RMR cut, etc). First thing I did install the Apex Enhancement Kit, but I still didn’t love the Dagger. The ergos on the P80 are just better for me (grip angle and no finger groove/nub).
@v-725-v2
@v-725-v2 2 жыл бұрын
Do you think hogue grips would fit on it?
@kingopp808
@kingopp808 Жыл бұрын
Where can i get this complete slide?
@pharoone1065
@pharoone1065 2 жыл бұрын
Where do I get attachments for this? Lol
@aaronkeener95
@aaronkeener95 2 жыл бұрын
No thanks. $489.99 for Glock 19/17 Gen3 or $410.99 GSSF Pricing
@jackbauer4186
@jackbauer4186 2 жыл бұрын
Going to cost you another $400+ to get the save stippling, undercut, beavertail, slide serrations, and sights on a standard G17 though.
@aaronkeener95
@aaronkeener95 2 жыл бұрын
@@jackbauer4186 not even close. First of all can do that self and unless you have a shit FFL blue labels come with NS.
@Vntichrist
@Vntichrist 2 жыл бұрын
$319 on primary arms
@jdmb03
@jdmb03 Жыл бұрын
I paid $350 OTD for a PFC9. You obviously haven't tried a P80.
@aaronkeener95
@aaronkeener95 Жыл бұрын
@@jdmb03 you were obviously poor and trust in trash handgun to save your life.
@brucef5088
@brucef5088 Жыл бұрын
when i press check my p80 when its chambered and i release it, it never fully racks forward, i have to kind of bump it forward, anyone else have this issue or do i have an issue? ps i have shot it and broken it in yet. if i let the press check go forward with some force, it will rack properly, but if i simply just let it go it wont engage all the way forward. im afraid if when i go to shoot it the slide wont engage properly either forward or backward.
Glock 17 vs Poly 80 Clone
15:56
Lock N Load Radio1
Рет қаралды 104 М.
Taking a First look at my Polymer 80 PFS 9.
14:12
The Jimmini Show
Рет қаралды 14 М.
I'm Excited To see If Kelly Can Meet This Challenge!
00:16
Mini Katana
Рет қаралды 33 МЛН
IQ Level: 10000
00:10
Younes Zarou
Рет қаралды 13 МЛН
Lehanga 🤣 #comedy #funny
00:31
Micky Makeover
Рет қаралды 26 МЛН
Glock P80
26:28
hickok45
Рет қаралды 654 М.
P80 PFC9 - Important Update!!!
9:44
360 Tactical Solutions
Рет қаралды 23 М.
Unboxing - Polymer 80 PFC9
6:09
GunBox Therapy
Рет қаралды 101 М.
Fixing the slide drag on your Polymer 80 build
9:43
Gledhill Customs
Рет қаралды 109 М.
New Products: Polymer80 Complete PF-Series Pistols
2:24
Brownells, Inc.
Рет қаралды 42 М.
Gucci Serialized Polymer 80 PFC9 Build
17:05
Hai Tran
Рет қаралды 14 М.
Polymer 80 Pistol Blanks - January 2023 Update
8:33
Bearco Training
Рет қаралды 109 М.
Is the POLYMER 80 PFC9 Any Good? Glock Wannabe? Our FIRST Test!
9:46
P80, My First Build
21:05
BrowncoatNerd
Рет қаралды 15 М.
Fixing your rail issues on your polymer 80
7:24
Gledhill Customs
Рет қаралды 81 М.