Restaurant Tabletops, Countertops, Commercial Bar Tops Epoxy Pour Demo (For High Traffic Use)

To download our new step-by-step instructional bulletin. please click on the following link:
Please Click on this link to download our MAX 1618 Instructional bulletin for further details:
goo.gl/RFa75Y
To view more usage demonstrations and how to calculate resin usage based on the area of the table or any surface, please visit our eBay store.
MAX 1618 A/B eBay description page:
www.ebay.com/i...
Video Description
Four feet by four feet table top made from recycled wood from a bowling lane is epoxy coat 1/8 inch thick. This video demonstrates the preparation of the wood that has imbued with wax and polish typical of a bowling lane.
MAX 1618 A/B is applied onto the tabletop to create a very clear, color stable resin system to a thickness that produces a deep transparent coating that is durable, resistant to repeated cleaning with industrial surface cleaner. It is suitable for commercial bartops and tabletops applications.
MAX 1618 A/B was used as the top coat for an exotic wood bar top; click on the link to view our eBay page for more details;
www.ebay.com/i...
The sides were coated using a high-density foam brush. Several coats were applied in thin films to minimize runs and drips 4 hours apart between coats. Here is a video demonstration of a resin application where an HD-foam brush was used as an example;
• How To Apply MAX CLR A...
A foam roller can also be used; here is a video demonstration illustrating the principles of epoxy resin application. The coating thickness should be at least 0.010 inch or 10 mils which provides hermetic sealing.
• MAX GPE WHITE GEL COAT...
High-density foam rollers and brushes can be purchased from most paint stores or at www.whizzroller....

[@phantomcreamer]

How exactly do you do the sides? Lots of videos on doing the top

[@TheEpoxyExperts]

The side coating is applied using a high-density foam brush, which is applied in thin films to minimize runs and drips. Apply several thin coats 4 hours apart between coats. Here is a video demonstration of a resin application where an HD-foam brush was used as an example; kzbin.info/www/bejne/eWrKkHqIidSVi8k A foam roller can also be used; here is a video demo ( the resin system used is different than the MAX 1618 A/B, however, the principles of application are the same. The coating thickness should be at least 0.010 inch or 10 mils which provides hermetic sealing kzbin.info/www/bejne/n6LGlWqlhqyhirM High debsity foam rollers and brushes can be purchased from most paint stores or at www.whizzrollers.com/mini-rollers. Thanks.

[@phantomcreamer]

@@TheEpoxyExperts thank you! This was extremely helpful

[@roxoriginal732]

Let it drip[ over the sides then after about an hour lightly go around the sides with a foam pad \brush until your happy with the finish then sand and repeat the process ,,happy days 😎

[@phantomcreamer]

@@roxoriginal732 I've asked a few, and this is the only real answer I've heard

[@Beachnative42]

Another youtube user had a great video where he used a squeegee with 1/8 " teeth cut into it and it helped apply a level coat much quicker than I ever could using a brush and guess what? NO BRUSH hairs t bull out. It was proof that you are never too old to learn new tricks......Great video and looks like a fantastic project!!!!

[@relentlessmadman]

one mans Jazz is another mans torcher

[@TheEpoxyExperts]

I apologize for the late response as I just found your inquiry.To prevent the resin from spilling over the first thing you want to insure the table is level.The MAX 1618 resin system has a natural tendency to maintain a meniscus, similar to filling a glass of water past the brim and creates a dome shape.A meniscus is caused by the physics of all materials called dynamic surface tension. By calculating the coating thickness at 0.080 inch will not spill over and create a domed edge. Thanks, Gerald

[@WhatTheFlyinFudge]

"April in Paris" - kudos on the choice of music!!!

[@nestormejia2692]

Very professional painters very good video 👍

[@RAPLOCHREPORTER]

I am an Interior designer and this is amazing i LOVE IT!!

[@carolburnett8372]

Thanks Gerald L. for all of this information you shared. Thanks for your answers to the questions, I learn what to do and what not to do there as well.....You are very special to share and you know your stuff :)

[@adriangrapes4319]

Wow this is the complete way of applying coating on wood counter tops. While this method is excellent in getting a very tough film. There is an alternative that is by using natural gum copal mixed with alcohol solvents. it may not be as tough as this but is way cheaper and the application is very easy

[@Alan_Garkle]

Great use of an old bowling alley. Nice job!

[@doctorbillzable]

I use West System on custom yacht deck tables, and have always used a propane torch, not a heat gun, if bugs or trash gets on it, you can sand it down and repour it again. After several coats [ depending on the build up required] of W/S, I will sand the table w/400 grit, and apply 6-9 coats of urethane clear coat, sand and polish to a "Bently"s hood shine"!

[@TheEpoxyExperts]

There are a times when a propane torch is more effective but there are times when a lower heat source such as a heat gun is more conducive. This video demonstrates both. Prepare your environment carefully and flying insects and debris is not an issue. This tabletop was done in two coats and has been in service for over 10 years with excellent results

[@TheEpoxyExperts]

***** Thanks Andrew, I will review it.

[@RaquelSarangelloartist]

POLYESTER RESIN WORK WITH MANY YEARS , GREAT VIDEO.

[@darlenedsdesigns3005]

Love the music! Thanks for all the great information.

[@osaDBX]

the best table and the best music

[@ozzleoni6609]

I've used MAX 1618 for many years now and it is the best epoxy resin for wood finishing and casting.

[@toobigtocaremusic]

Monk! Wasn’t expecting that 😃

[@TheEpoxyExperts]

How about some Art Blakey ; kzbin.info/www/bejne/eWrKkHqIidSVi8k Enjoy!

[@l0ok5ko0l]

Oh, in answer to some previous questions, getting even coverage is the result of having carefully levelled the surface as these products are 'self levelling'. The edges look after themselves as the resin flows over the edges.

[@samrowe2889]

Ok I get that but why wud u want that go over rhe edge I mean

[@Gyva02]

Great I have ordered the 1618 from ebay, I ordered it before you responded here. and I had send a question wondering if I should have bought the HP but then later wrote back and said nevermind I'd be sticking with the 1618... Hopefully thats whats in the mail :) Thanks again, its a beautiful way to finish projects.

[@liegelr]

I liked this just for the choice of April in Paris! (Nice table too, though!)

[@TheEpoxyExperts]

You need to seal the concrete by applying several thin coats of the same resin and let it absorb and then cure to create a barrier and seal off the concrete's porosity before pouring the thick coat. The exotherm or heat out-gassing from the curing resin will cause bubbles to be entrapped within the coating. Same process as you would on wood or any porous substrate.

[@dodgesportsman772]

I think Im going to try to do with with my new cabinets during my restore phase of my RV, thanks!

[@KarlaSSuhas]

That was a great lesson, I'm wanting to do a old table top. Thanks!

[@TheEpoxyExperts]

+Karla Suhaskumar Please visit our new direct to the public sales web store at www.theepoxyexperts.com. All products are on sale, 10% off. Thank you. Gerald L

[@ROOKTABULA]

Didn't show how you did trim/sides........ To avoid runs and have even coverage.... How?

[@vincent7520]

Thank you for April in Paris by Coltrane !!… Wear masks : epoxy resin can creates strong allergies. Once it happens there is no turning back : someone who's thus affected cannot get close to the resin …

[@Beachnative42]

Also Never use a heat gun, a heat gun takes in air heats it and them blows it around. Have any dust floating in the room? Guess where it will land? Always use a propane torch and move it quickly. Aslo when applying the final coat, mix it in one bucket, then pourall contents and scrape the sides into another clean bucket and mix again. I've poured 5 gallons at a time and never had any issued , except finding two six gallon buckets : )

[@Beachnative42]

I've made epoxy tables for over 30 years and I found a few thing in your video I would never do. #1 Never seal wood with any typer of filler added to the epoxy...isothropic resin? You mean there is cabosil in it? Instead mix 3% denatured alcohol with the epoxy mix and appy the thinnest coat you can. That will allow the resin to be absorbed into the wood instead of sitting on top of it. Also NEVER mix independent batches of resing for your final coat, if you look close enough you will see it.

[@TheEpoxyExperts]

You can build a force-field around the table... a tarp or plastic 8 inches above the table for the dust and bug-zappers placed one above and one on each corner...true story!

[@anthonyhorney7253]

nice video, the table is beautiful

[@faffaflunkie]

Now _that's_ some _good_ wood.

[@TheEpoxyExperts]

faffaflunkie Thanks. It was actually wood from an old bowling lane that was rescued and re-purposed. We initially had problems making the resin bond to it since it was heavily saturated with polish wax. The wood was sanded as much as possible and a formulated thixotropic primer was then applied, cured and again sanded before the MAX 1618 A/B top coating was applied. There were 15 of these tables was made 4 years back and they are still in service till' this day.

[@jaywilliams415]

That was about as exciting as watching paint dry! Lol

[@Marlene55M]

Great music!

[@TheEpoxyExperts]

Just sand a 10 mil layer with 220-sandpaper, re-level and pour. I have art covered specimens and tabletops 7- years old...no re-finishing required.

[@TheEpoxyExperts]

The mix ratio is 2:1 by weight or by volume. Beware of 1:1 mix ratio resin systems that are marketed as clear bar top resins. Low-cost plasticizer additives are added to the curing agent to bring the mix volume to 1:1. These plasticizers will reduce the outdoor durability of the resin system causing it to yellow much faster by comparison.

[@nestormejia2692]

Master guys 👍👌

[@TheEpoxyExperts]

Yup freaking cool shit bb, but you need to seal the concrete by applying a thin coat and let it absorb and cure to create a seal off the concretes porosity before pouring the thick coat. The exotherm or heat out-gassing from the curing resin will cause bubbles to be entrapped within the coating.

[@TheEpoxyExperts]

Yes it can. check-out our other video "how to polish epoxy coatings" also on our you tube channel

[@l0ok5ko0l]

Yes, great vid with nice choice of music. I have had success on my first attempt using a similar process in the past though I'm just wondering how to deal with the inevitable dripping on the under-side. Is it just a case of grinding/sanding the under-side edges to remove the drips once they've cured? Should I be wiping the under-side edges as the drips appear throughout the curing process? Anyone had success with this? P.S. I coated my computer desk which is a solid core door sitting atop two dual drawer filing cabinets - it looks great and is very functional with the weight of the door negating the use of any attachment of top to cabinets. If I need to move office it's an easy process of removing the door/desktop and carrying out all separately. In Australia I use All Purpose Coatings Epoxy 100 Glaze - a great product and cost effective.

[@TheEpoxyExperts]

Unfortunately epoxy resins do not fair well under direct sunlight. As with most polymer plastics place under direct sunlight exposure, it will photo-degrade due to the damaging effects of ultraviolet energy from sunlight. But if you keep the bar top covered when it is not in use, it will hold up to outdoor exposure. Polishing the surface with an automotive polish will also help improve outdoor weatherability. Just type MAX 1618 on any search engine and you will find our ebay store. Thanks

[@braddwheeler8283]

Nice job. ( But the rendition of April in Paris music was Thelonious Monk, not Coltrane ;-) )

[@TheEpoxyExperts]

Thank you, yes it was Monk indeed. The correction was noted in the video description. In any case, hoped you enjoyed the presentation. Category Science & Technology License Standard KZbin License Music "April In Paris" by Thelonious Monk Thanks again. :)

[@NaturalComfortsCooking]

Very helpful! Thank you of sharing this.

[@nestormejia2692]

Very strong 💪 epoxy super hard

[@Truthwarrior562]

you guys are awesome thank you

[@TheEpoxyExperts]

Thank you very much, Phyllis. Often, a few kind words are all that is needed to share knowledge to those that seek it. :)

[@patricedauzartluter5948]

I love the tutorial but am quite an amateur. I have never ever done anything like this but saw a DIY on resin & acrylic paint to redo a table top. I don't know where to start but am very anxious to try this method on several TV tables. What type of resin & epoxy materials do you recommend? Once again, I haven't a clue as to how or where to start this process. PLEASE HELLLLP!!!!!!!!!!!

[@cloverdale87]

That would have made a real nice shuffle board table. A nice 25 footer.

[@amytopor2766]

I did this on ceramic tile with a photo to make a coaster - the hot coffee mug sticks - what can I do to prevent this from sticking ? It has been cured for 5 days so it is surely dry enough !

[@weeverob]

what about the molding around the poured surface? it appeared not to be coated with resin, lots of uncoated areas.

[@tracey278]

MMM i like your product ,, but to use it on my kitchen table i want to know how long does it keep its glass like finish and what type of cleaner can be used to get off grease..can it be buffed back after a few years .. and will it dent ,, what about heat a hot plate of food can that damage it .. thank you

[@AdditiveAvery]

Would it be best to somehow get each surface horizontal, and do like you did in this video? Then i wouldn't have to use bondo, etc to fill the gaps.

[@FactChecking101]

I am hoping to do an epoxy pour for an outside table. Is there a UV resistant product? Will keeping the table covered when not in use help?

[@KeyserSoseRulz]

Epoxy and Jazz. How come I never thought about it?

[@Xxjoeynumber1xX]

If epoxy did not completely cure and is still a little tacky can put a thin coat over it again and have that harden over the top?

[@TheEpoxyExperts]

Hello, Not really recommended as it may delaminate over time and will also cause a reflective blemish. It will also 'telegraph' the blemish on the surface and will be very noticeable. Try to remove all tacky spots by wiping it with acetone (as it is not fully reacted it will dissolve in acetone) until all tacky spots are removed. Use a razor knife to create a smooth-wall cavity (non jagged) and refill the void with mixed MAX 1618 slightly higher than the surface creating a slight mound. Allow to cure for 24 to 36 hours and sand flush with the surface. Tacky spots are cause by poor mixing; make sure to watch our mixing instructional video (kzbin.info/www/bejne/g6Olm5WCqdqjndk) to insure uniform misture. Upon cure you can sand the mond flush using a fine sandpaper and then polish (kzbin.info/www/bejne/qmLTe6abjdJ5pbc) to blend the repair.

[@rodya255]

Just did my first project, kitchen counter. Unfortunately, I didn't have enough epoxy. It settled with little pockets not filled in. Any advice on how to fix this? I guess just pour more after it cured. But do I sand the dry layer before pouring again? Hard lesson learned

[@bobbybass7518]

I made a counter top out of 1x4s looks very nice but having trouble getting it smoothed out can I roll this stuff or brush it on to get the different heights out of it?

[@VENUEATHENS]

Hi there.. I'm thinking of using this epoxy clear resin on a old vitage Trunk/chest.. Can it be applicable to other materials/surfaces? I want that shiny gloss look and also to preserve some of the old stickers it has from the places the case has been too..

[@TheEpoxyExperts]

Hello Tony, yes this resin system will work well as a top coat and for picture embedding. If you have pictures of the chest you wish to coat, send them to this email address, [e-mail], and I will review the pics and provide you with a method of application. Since this resin system, MAX 1618 A/B, has a medium set working time and is self-leveling, applying it over a contoured plane may require a different application technique. However, if the surface to be coated is flat, just follow the application as demonstrated in this video presentation. Here is a link to our coatings application tech bulletin for more detailed information and application instructions, including discussions regarding picture embedding; theepoxyexperts.com/wp-content/uploads/2016/11/MAX-1618-A_B-Instructional-Bulletin1.pdf. More info and other useful links are posted on the video description above. Thanks.

[@tbublz]

How can I do the bark on a slice out of a tree for a top?

[@TheEpoxyExperts]

This resin system, MAX 1618 A/B can be applied directly over bark wood. Typically, a small amount of acetone is added to the mixed resin and this will lower the viscosity and reduce the surface tension of the liquid resin making it penetrate the bark. Allow this application to cure for 18 hours, which will stabilize the bark and prevent it from peeling. You may need to apply the MAX 1618 A/B epoxy resin several more times so that the bark is embedded in the resin. Omit the acetone dilution for the subsequent coats as it is no longer needed since the wood porosity is sealed from the first application.

[@nestormejia2692]

Beautiful

[@indianvb]

This is the similar epoxy used in fiber to mold in size

[@fyrcapt22]

Hi Gerald . I'm trying to rebuild a table hockey game and wanted to try and create a very realistic "Ice" look. How well do you think the little plastic puck would slide on this finish?

[@1975curt]

Epoxy resin has harden, can you get the bubbles out from the top?

[@Y7FFVGcQ]

You have to cover the surface with something, maybe a tent of sheets or something, so nothing falls into the resin as it cures

[@The570Experience]

Do these resin gable tops withstand heat well after they are cured???meaning once done does it hold up to plates with hot food on them or a serving dish with hot food on them.....my current table doesnt...the finish is cheap and if I don't put something down even supper on the plate will turn the finish white from the heat

[@TheEpoxyExperts]

Flying insects fall down high 10 feet from our test area...J/K, You can build a force-field around the table... a tarp or plastic 8 inches above the table for the dust and bug-zappers placed one above and one on each corner...true story!

[@ITSBL00DLINES]

Great video! Question though, why not mix part a and b together be more you apply?

[@TheEpoxyExperts]

The target coating thickness was 1/16 of an inch and. making it thicker will make the table heavier as well as the cost. We made over a dozen of these tables and the customer had a budget cost per table. Typically a tabletop coating should be around 0.080 to .0.124 inch thick. Since the coating is only applied to one side of the tabletop, making it too thick will cause the table to warp over timer. When a resin polymerizes from a liquid to a solid polymer, it will demonstrate a small amount of shrinkage - the thicker the coat, the more internal pressure is applied that may cause the flatness to warp. www.ebay.com/itm/221325226336

[@Max14163]

Are you guys saying the first pour was part a and the second pour was part b? Surely that can't be right. The heat gun mixed the two!?

[@eddiehalim6912]

I did on my table, and why does the bubble keeps coming out? I already used the heat air the bubble disappear and then coming out again

[@chim7741]

I see they switched from the heat gun to the torch!

[@SmackForSale]

I’m doing this to my wooden desk but I have to do it outside and it’s cold so how long should I leave it to cure? How would I go about this after pouring it on?

[@phoenixrisingharley]

wow, fantastic looks great

[@TheEpoxyExperts]

Thank you, this product MAX 1618 A/B is one of the most used resin systems for commercial bar tops and table tops. Here are links to our bulletin and to the product in our eBay store. Thanks again. To download our new step-by-step instructional bulletin. please click on the following link: Please Click on this link to download our MAX 1618 Instructional Bulletin for further details: theepoxyexperts.com/wp-content/uploads/2016/11/MAX-1618-A_B-Instructional-Bulletin1.pdf To view more usage demonstrations and how to calculate resin usage based on the area of the table or any surface, please visit our MAX 1618 A/B item page: www.ebay.com/itm/221325226336

[@iraismorales9016]

Im trying to do this for a cheap drawer set, to protect the paint. Any advice ? Do I need to sand it? Wouldn’t that remove the paint Im trying to protect? Help?

[@MagixScience]

I see this video shows the exact same problem I'm having with epoxy right now.. its driving me nuts and it's ruining everything.. How do you get the vertical sides perfect? I see in this video, they're blotchy with vertical fingers and a bulge at the very bottom. How do you prevent and/or remove this?

[@towanaposey7300]

I have a ceramic tile kitchen table. I would live to redo it, but have a crazy idea. I would like to paint it and then,put pictures of my kids and our family on it , then I want to put the resin on top. To make it look like they do in bars. Is this possible on top of the tile?

[@TheEpoxyExperts]

Towana Posey Hello, Here is a link to our table top coatings bulletin which discusses about picture embedding and other related subjects. www.polymercompositesinc.com/wp-content/uploads/2014/11/MAX-1618-A_B-Instructional-Bulletin1.pdf Yes it can be applied unto ceramic tile and other masonry substrates; here is a video demonstration: kzbin.info/www/bejne/ZoSydY2tbJaUhLc Thanks.

[@MrJoeHalt]

Hi Gerald, I'm getting ready to do a pour on a desk top I've made. I made the top out of rough-sawn lumber, it's about 22" X 50" and I wanted the surface to be smooth and hard so I decided on the epoxy. I used other finishes before, but never epoxy. There are many uneven features and imperfections in the wood, and I was wondering the best way to ensure a smooth finish. Would it be multiple coats, or would a seal coat suffice? or use trim to build a lip or dam around the edges? I've just seen too many table tops in restaurants here lately, since I've been paying attention more, that have seams and other flaws, and I want to avoid these. Thanks

[@TheEpoxyExperts]

Hello Chris, Do me a favor and email me at our email address at [e-mail] so I can respond properly to your inquiry. Thanks. Gerald

[@MrJoeHalt]

Gerald L. Hi Gerald, I emailed you yesterday, and just wanted to make sure your received my email. It came from a tds.net account. Thanks!

[@99EvilMonkey]

NEED HELP! I built two tables using antique license plates as the tops. Each one I covered with a two-part epoxy system. Had to have the ratios right because I used it all. Stirred it thoroughly. Yet both projects ended up with soft/gooey spots. I peeled and scraped it all off, thinking I got a ad batch from HD. Gave it another shot. Better, but still at least one small soft spot on each table. I even offered another brand of product for the second table. What am I doing wrong here? They look amazing!! But the soft spots make them unusable and redoing them is expensive and very, very messy!

[@TheEpoxyExperts]

I have had customers that have the same problem of seeing uncured (gooey and sticky) spots in their pour application. The reason for this is poor mixing, which is something that we highly emphasize when preparing large batches. Watch this video link and the answer to the problem is discussed in detail. It demonstrates the proper mixing procedure of any epoxy resin system and eliminates this problem. The videos on this playlist are all relevant to your application, regardless of which epoxy system you use. kzbin.info/www/bejne/h2OrdId_m9Z8rrc Hardware epoxy resins (or any 1:1 mix ratio epoxy resin systems) will not give you the best results. These types of epoxy resin systems contain too much plasticizer filler to bring the mix ratio 1:1 for ease of use, however, the overuse of the plasticizer filler degrades the cured resin performance. Plasticizers are also the cause of many allergies reaction with epoxy resins. Here is a PSA we published on our facebook page that realtes to this issue: facebook.com/PolymerCompositesInc/posts/2340648502629013?__tn__=K-R Contact me at [e-mail] if you require further assistance.

[@jackhong1768]

wow this is nice, thanks for sharing. Just 1 question, would it melt again as if i put some hot object such as kettle on this epoxy countertop? thanks

[@LetsGoFlyers2011]

nice job! neat table idea!

[@tripled5340]

What about the sides or edge. Do you sand the edge and finish face/sides with varnish?

[@TheEpoxyExperts]

I used the same resin for both the sealing and thick coating process. The sides were pre-sealed and brushed applied using the same MAX 1618 resin system. MAX 1618 A/B www.ebay.com/itm/EPOXY-RESIN-VERY-CLEAR-COMMERCIAL-TOP-COATING-4-BARTOPS-COUNTERTOP-1-5-GAL-KIT-/221325226336 You can also download our DIY wood sealing bulletin; www.polymercompositesinc.com/wp-content/uploads/2015/08/Basic-Steps-of-Wood-Sealing-and-Waterproofing.pdf Thanks.

[@omejia9243]

Will a layer about 3/4" thick of epoxy stick to wood or would it need a frame to hold it against the wood ?

[@ARICIKRAL]

Greetings from an international audience. First of all, thank you for such a useful video. i want to ask a question, if you answer it i'll be very happy. What i want to know is; is epoxy resin applicable on a wooden horizontal surface? i mean on the wall of a wooden hut. Thanks and regards...

[@TeeGiang]

what do you do about debris or insects falls into the work piece as it cures?

[@bradmorgan9000]

Nice demo but you failed to show how you covered the sides of it to make it look whole ?

[@natashamuniz7773]

i have a surface of 19 3/4 x 19 3/4" and i need a very thin layer of resina.... you can tell me how much resina i need???

[@kadu1669]

How does this resin hold up out in the sun and rain? I was thinking about building a counter top out by my pool next to the grill.

[@Bizzare_Duniya]

nice video... is it possible to paste a paper design on wood and then apply the resin. will it be of good quality or paper will peel off in some time??

[@TheEpoxyExperts]

Yes you can. You may have to test the printed ink and make sure it does not bleed or run as some ink jet printed images do. Color laser printed pictures, posters. and other commercially printed media are best to use. Here is a link you can download with detailed instructions; theepoxyexperts.com/pdf/MAX-1618-A_B-Instructional-Bulletin.pdf There picture embedding procedures note on this bulletin. Thanks

[@your-drunk--go-home1101]

Can I put resin on a latex paint pour. If so what kind of resin would work best for out doors?

[@rupalipatil8463]

I have araldite resin with specification cy230 and hardener hy951 which I was bought for project purpose. But now it's not required. Now what can I do with it? please help..

[@paulaparmer5152]

had a terrible experience half the table came out great....the rest very streaky some area very thin coating. we leveled it. did everything as directed. did do it outside. ? temperature.How do I get this off to start over or do a different finish. disappointed.

[@TheEpoxyExperts]

Hello Paula, Sorry to hear you are having problems with your project, The way I can see this problem is that if half of the table came out great and parts did not, it is not a material or resin problem but a process issue. As you mentioned you did it outside may be the problem. The environmental conditions (humidity, temperature and airborne debris, for example) must be controlled to avoid any problems similar to your results. Also if the table is not prepared properly it can also be a source of surface imperfection Please give me a call at 877 403 8008 (Mon-Fri 10am to 4pm PST) and I will be more than happy to discuss with you some techniques that may resolve this problem. if you can take pictures of the imperfections you noted and send it to my email address at [e-mail], it will greatly help in identifying the root cause. Call and I will help resolve your issue; I do not like disappointed customers. Sincerly, Gerald Chief Chemist

[@TeeGiang]

lol i figured ive seen so many of these how to's but no one ever brings up insects being an issue on the finished product.

[@grebdnulyrag]

I put a glass finish on my bar and have some sticky spots. I can only guess that I didn't mix the two ingredients well enough. What do you recommend I do? There are only a couple of small spots.

[@TheEpoxyExperts]

+Gary Lundberg Yup seen and heard about that horror story a thousand times and unfortunately yes that is the cause. Another possibility is resin crystallization. kzbin.info/www/bejne/g6Olm5WCqdqjndk or www.polymercompositesinc.com/cold-weather-notice/

[@axoll]

I have ceramic tiles on my countertop. can I use this over the ceramic tiles?

[@DavidHancock]

I'd like to make a desktop and seal beer bottle caps inside the resin (physically attaching the caps to the desk and then pouring resin over it, deep enough to cover. Will a project like have any chance of success?

[@marpletje]

cant you make a small version to try? :P

[@TheEpoxyExperts]

Sure, check out this link: www.ebay.com/itm/EPOXY-RESIN-ULTRA-CLEAR-INSECT-CASTING-SPECIMEN-PLASTINATION-PRESERVATION-3-4GAL-/310368272742?

[@TheEpoxyExperts]

It holds up very well. you can pour gasoline on the surface and nothing happens to it. Just like McDonald's. many restaurant tables all over the world serve (customers), but unlike McDonald's, we haven't had a complaint from does you followed directions. Peace.

[@Jackle61]

What kind of thixotropic epoxy sealer did you use? Was it clear or colored to match the wood?

[@amiman23]

I've seen too many of these tables spoil over a fewe years with seperation and softening where you can scratch it off with finger nails and huge chips of exposed wood

[@TheEpoxyExperts]

The failures you've mentioned is why this product and video demonstration was developed and published. I'm not saying this is 'bullet-proof'... however, it performs noticeably much better than common hardware-bought or our competitor's resin systems. Most of the failures you have noted are processing or application issues which we have explicitly addressed in the video demonstration. Here is a link to our Tabletop Pouring Bulletin that provides more detailed usage instructions; theepoxyexperts.com/wp-content/uploads/2016/11/MAX-1618-A_B-Instructional-Bulletin1.pdf Thank you for your comment.

[@samrowe2889]

The stuff is for life bro.

[@ecolik12]

How much epoxy resin would you need for a 7 feet by 3 feet table per layer?

[@zzzzzsleeping]

Ok...what about the side of the table? How do you epoxy the side? Or what happened to the side drips?

[@Rukirisan]

The garage may be a better place to do it..

[@billyd21556]

How do you keep dust particles from falling on the pieces you are working on and ruining it

[@TheEpoxyExperts]

We usually run a HEPA air filter in a small pour-room for 24 hours before pouring the resin. I have also used a canopy over the project to keep dust from landing on the surface; leave about 5 inches of space between the resin surface and the canopy to allow the exothermic heat the resin generates as it cures to vent out . Another common problem are insects that dive-bomb from the glossy reflection of any overhead light- bug zappers works great and a good source of entertainment until the resin cures. Generally avoid cross wind or drafts when the resin is applied and this will reduce dust contamination.

[@jazzmietze]

Could I use something other than a heat gun or blow torch? Excuse my amateur question, but would a blow dryer work?

[@TheEpoxyExperts]

Most household blow dryers are not hot enough to effectively destroy the surface bubbles, and more like to contaminate the surface with dust particulates. Here is another technique of removing air bubbles from an applied epoxy coating using a very light mist of acetone. Please view this video; kzbin.info/www/bejne/aIGun2BrbtV7hK8

[@stephencopley2196]

how do you remedy the damage it may get?? and what do you use to take it off if it needed taking off? Nitromors doesnt take it off dry scraping takes too long n causes damage if not done profesionally

[@TheEpoxyExperts]

An epoxy application is permanent; it is practically imposible to remove the coating without some serious sanding to get it down to bare wood again. However, the cured epoxy coating is much tougher and can be polished to remove any incidental scratches and scrapes. A fine-grit polishing compound is used to remove scartches followed by an application of polish to bring the luster back to its original high glosh finish. Here is a video link for polishing epoxy coatings; kzbin.info/www/bejne/qmLTe6abjdJ5pbc

[@theothersideofthecoin.9890]

Can a hair dryer be use.???

[@joeyzhill]

I love this too, what do you do about the edges?