That's a fantastic way to tighten those barrel straps. I will definitely be using the same technique when I build my pontoon. Cheers buddy👍😁
@chud3274 жыл бұрын
Did you see build #2 where I used trampoline springs to keep the barrel straps tight? Thanks for watching.
@MONK-74 жыл бұрын
@@chud327 not yet but I'm looking forward to it.
@MONK-74 жыл бұрын
@@chud327 I've liked and subscribed to your channel 👍😁 yep yep yep!
@bojijani69472 жыл бұрын
پیارے بھائی آپ نے بہت اچھا کام کیا ہے پاکستان میں بھی لوگوں کو ایسا جھاد کرنا چاہیے
@chud3272 жыл бұрын
I don't know what you said but thanks for watching
@mishawakapost26815 жыл бұрын
Fist bumps 👊👊👊👊👊, high fives/pats on the back ✋✋✋✋✋, extra thumbs up 👍👍👍👍👍 Pets ❤❤❤❤❤, treats and tummy rubs. Was hoping the next one would be a houseboat.
@chud3275 жыл бұрын
There may be a mini house on it... Thanks so much and thanks for watching.
@jameslaw37404 жыл бұрын
Use marine silicone in the bung plugs to make them water tight. Looks like a lot of fun. 👍 👍 🇨🇦
@chud3274 жыл бұрын
They are a blast and thanks for watching.
@mefirst4266 Жыл бұрын
HE DOES NOT HAVE THAT MUCH MONEY !!! MAYBE FLOUR AND WATER...
@majharulislam595022 күн бұрын
Excellent demonstration of yr project. At the botyom side squize due to water pressure. How to over come this problem, can we get some idea on it from u pls.
@chud32722 күн бұрын
You can seal on a cold day, drop dry inside and seal, or add valve stems. thanks for watching.
@613Builds5 жыл бұрын
im having deja-vu lol. i like your original setup with rear offset barrels. the 12' craft i made with 8 barrels was VERY buoyant. it sat on the water instead of in the water lol.
@chud3275 жыл бұрын
You may be having deja-vu, but this will be a first watch for many viewers. I like how it is all in one episode. These guy are really buoyant and thanks for watching.
@jobdoneperfect91762 жыл бұрын
Lovin this redneck boat.
@Rider-lh2gz5 жыл бұрын
Cool you should get a bigger tarp on the top and make wood sides like half way up the boat so if you slip or something while on the boat,cool build 👍
@chud3275 жыл бұрын
I am planning on building some side rails on this one. A bigger top would be nice too. thanks so much for watching.
@jimjakosh25062 жыл бұрын
Nice build. Need to get you a small four stroke! Those deflectors area good idea!
@chud3272 жыл бұрын
Thanks so much and thanks for watching.
@BTFOOMNY4 жыл бұрын
wow. there's a blast from the past.....MONTGOMERY WARD Sea King boat. Monkey Ward went out of business in 2000. Apparently. was resurrected in 2004 as an online store only. I'm old.
@daminh264 жыл бұрын
The editing of this video is like the pontoon boat just put together. Good effort and good idea.
@chud3274 жыл бұрын
Thanks 👍Have you seen the build for pontoon #2 yet. thanks for watching.
@DirtyBikerBoyQT5 жыл бұрын
And it’s 5 barrels long awesome!!!
@chud3275 жыл бұрын
She is going to be about 15 feet long!
@bizim_eller3 жыл бұрын
The Florida man is proud of ya🤣🤣👍
@chud327 Жыл бұрын
Thanks so much and thanks for watching
@doughubble28165 жыл бұрын
Yeah im so stoked. Cant wait.
@chud3275 жыл бұрын
Me too, I hope the weather will cooperate real soon. thanks so much for watching.
@doughubble28165 жыл бұрын
One question. Are you going to use the puppies to make this one too? Lol
@chud3275 жыл бұрын
We have given the puppies away and I doubt the cat will help at all...
@danphillips61674 жыл бұрын
New york wouldn't let you put this in the water (legally) nicely done
@heathschwab5 жыл бұрын
Nice recap vidoe. Was awesome watching can't weight to see #2. Thanks for sharing be so cool to own one like that. Have a great week. God bless
@chud3275 жыл бұрын
Thanks so much and I will try to start it real soon. thanks for watching.
@davidswimsr.83435 жыл бұрын
I was thinking about a tri- toon. Using 30 gallon barrels 2,2,and 2. Using aluminum tubing for the frame. Ending with a 1-2 man boat that would pin together with quick pins. Nice boat you have.
@chud3275 жыл бұрын
Sounds like a good plan! Thanks so much and thanks for watching.
@rakim1263 жыл бұрын
yeah for me dissassembling it would be key to get it on a roof rack.
@detroitredneckdetroitredne66745 жыл бұрын
I would like to see you 5 barrels on each side this way you will have plenty of length for the growing family and you can make it a try Hull if you run some down the middle for storage
@chud3275 жыл бұрын
I think it will be 15X8, that will be considerably larger that boat #1. Hopefully the growing family will have plenty of room and thanks for watching.
@mattparker97264 жыл бұрын
hell yeah son, you got it made!
@chud3274 жыл бұрын
Thanks so much, did you see #2 after it was built? Might take it out again today... Thanks for watching.
@mattparker97264 жыл бұрын
@@chud327 yes I have watched all the boat build. Really good job!
@okingtetapmancing42443 жыл бұрын
👍👍👍👍👍
@llblueli90805 жыл бұрын
That was cool view where the fish where
@chud3275 жыл бұрын
That was one of my favorite parts of that trip. Maybe I can get back there in the next couple of adventures. thanks so much for watching.
@matthiasholstein24425 жыл бұрын
You makes so great videos. This video is perfect and i like it. I wish you and your family a very nice weekend. Have a great time.
@chud3275 жыл бұрын
Thanks so much and thanks for watching. Your comments are always perfect too.
@matthiasholstein24425 жыл бұрын
@@chud327 Thank you very much. For you always. i enjoy your videos.Have a nice day.
@hobartelam3799 Жыл бұрын
Can you do a video on getting your barrel boat registration???
@chud327 Жыл бұрын
I will try to talk about it more in my next build video. Hope to start number 3 real soon and thanks for watching!!
@borfishing76905 жыл бұрын
Whatever you do, don’t name it Titanic 👍🏼
@chud3275 жыл бұрын
That is what some one called build #1 and I said "No, I don't think so..." I might call it "monkey hunter". We have a place here called Silver Springs and they have actual real live monkeys there. My goal is to take this boat 5 miles up the silver river to find these monkeys. I will let you know when it happens and if the name sticks. thanks for watching.
@DirtyBikerBoyQT5 жыл бұрын
Yes!
@chud3275 жыл бұрын
Thanks Randy!
@e.a.dforlife97892 ай бұрын
I wanna know what your lawnmower is the one that is the army green?
@malvinjayungui15282 жыл бұрын
Is this posible at sea??
@ISOSAILING5 жыл бұрын
cool looking forward to more videos!!
@chud3275 жыл бұрын
Thanks so much and thanks for watching.
@lordrussell6663 жыл бұрын
how does the registration work exactly for home made boats and other boat related items?
@chud3273 жыл бұрын
In Florida, I just said homemade boat and they walked me through the steps. Thanks for watching.
@lordrussell6663 жыл бұрын
@@chud327 thanks for the reply so different states different rules thanks a million
@hilario7014 жыл бұрын
Great videos , I saw one of these on FB and looked it up on KZbin , going to build one just like this for the spring
@chud3274 жыл бұрын
I hope you have seen my new build, it is bigger and better than my first build. That video has been out about a week or 2. When you build yours, I hope you will post pictures on facebooks "homemade barrel boats" and thanks for watching.
@waltermajor7793 жыл бұрын
i guess I'm kinda randomly asking but do anybody know of a good place to watch newly released tv shows online?
@waltermajor7793 жыл бұрын
thanks, signed up and it seems like they got a lot of movies there :D I appreciate it!
@TonyNelsonCamping4 жыл бұрын
Awesome Build
@chud3274 жыл бұрын
Thanks so much and have you seen the 2nd one I built, it is even better. Thanks for watching.
@TonyNelsonCamping4 жыл бұрын
@@chud327 I still have to go check it out!! Thanks for the reminder! 👌🇿🇦
@luciamasik99434 жыл бұрын
Super pomysł z tymi beczkami.
@davidfish3349 Жыл бұрын
Awesome! I’m gonna build one for our fly out lakefront property here in Alaska
@giorgio050819754 жыл бұрын
Which lake is it?!? It's amazing!
@jafrim13934 жыл бұрын
good
@chud3274 жыл бұрын
Thanks and thanks for watching.
@allenmckinney95335 жыл бұрын
One of these days you gotta say screw it and put a chevy 350 on that thing.
@chud3275 жыл бұрын
That is funny, I was just talking about that in my Chewy van video... The van took that engine, maybe some other will come along and land on the boat. That would be cool. Thanks for watching.
@elmore1192 жыл бұрын
How are you able to get numbers for a homemade boat
@chud3272 жыл бұрын
I told DMV homemade boat and they picked out custom numbers for me. Just $32 and thanks for watching.
@elmore1192 жыл бұрын
@@chud327 O OK yeah I think an Arkansas game and fish have to inspect it
@rakim1263 жыл бұрын
whered you get the barrels and how much did they cost?
@chud3273 жыл бұрын
I found mine from a guy on facebook marketplace. He deals in barrels and sold them to me for $10 each and the 10th was free. Good luck and thanks for watching.
@rakim1263 жыл бұрын
@@chud327 Hell yeah bro im gonna have mine on the water soon enough!
@louistellefsen10054 жыл бұрын
What was the cost of the build?
@chud3274 жыл бұрын
On build #2, I have about $350 in just the boat build. The trailer was $200 and one of the homemade kickers was $90. I also spent $32.25 on registration. I hope this helps and thanks for watching.
@1adzer5 жыл бұрын
Good Job!! Lucky Kids!!!!!
@chud3275 жыл бұрын
Thanks so much and thanks for watching.
@michaelowens9355 жыл бұрын
How much trouble is it to get a title and registration for a homemade boat ?
@chud3275 жыл бұрын
It wasn't bad here in Florida. It took about 30 minutes and $32 to get it done. Thanks for watching.
@doughubble28165 жыл бұрын
Michael I think that i depends on the state that you live.
@chud3275 жыл бұрын
@@doughubble2816 for sure and thanks for watching.
@PKAdventures4 жыл бұрын
awesome build and video. you got my sub
@chud3274 жыл бұрын
Awesome, thank you! and thanks for watching.
@tamtamtamatim.48604 жыл бұрын
Perfect ⛵👍💙❤️🚤👌⚓
@tkl76743 жыл бұрын
Where do you find the barals
@chud3273 жыл бұрын
I found mine on facebook marketplace. Good luck and thanks for watching.
@bjstevenson723 жыл бұрын
How much does it weigh all finished
@chud3273 жыл бұрын
I would guess 700-800 pounds, but I don't really know Thanks for watching.
@bjstevenson723 жыл бұрын
@@chud327 thanks for responding I'm building one myself. I'm in oregon their rules for homemade boats are a little more stringent. Thank you for your videos they are very informative.
@jeffsratsrodsrebuilds15354 жыл бұрын
I'm gonna build a dock and found your video. Then I seen a 64 impala
@chud3274 жыл бұрын
Good luck with the dock and that impala should be back on the road... thanks for watching.
@chrislansaw94915 жыл бұрын
Hey chud I am following this and when you go to make the water deflectors for the front please , please, please make a good detailed video so I can make some for my rebuild...
@chud3275 жыл бұрын
I will try to make it more detailed than last time and keep following, I know I have been following your build. Thanks so much and thanks for watching.
@fishinisraelite64382 жыл бұрын
how much do you sell them for
@chud3272 жыл бұрын
The first one I sold for $500 just so I could start my second build. I need to sell the second to start my third build, but it would come with a trailer and I would be asking more. I would mind building them from scratch for people and charge pretty much what ever the lumber cost. Example $500 for material and $500 for labor would be a $1000 boat. Or something like that give or take. Thanks for watching.
@philliple2885 жыл бұрын
Nice job
@chud3275 жыл бұрын
Thanks so much and thanks for watching.
@selador115 жыл бұрын
Should have sold for twice that. You can't keep going, if you just give them away!
@chud3275 жыл бұрын
I will try to get more next time and thanks for watching.
@mefirst4266 Жыл бұрын
SON YOU ARE DEFINETLY KIN TO JERRY !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@chud327 Жыл бұрын
I don't know Jerry unless you are talking about the wife's uncle, but I doubt you know him .. thanks for watching!!
@nialpmatk045 жыл бұрын
I like the sufurvisers they are cute and fluffy
@chud3275 жыл бұрын
Yes, I guess that is where this video gets most of its likes. Thanks for watching.
@mefirst4266 Жыл бұрын
I WAS TALKING ABOUT JERRY RIGGING SOMETHING !!!!!!! LOL 😅😅😅🤣🤣🤣🤣😂😂😂😂😂😂🤣🤣😂😂😂😂😇😇😇😇
@chud327 Жыл бұрын
That makes sense now and thanks for watching!
@llithium05 жыл бұрын
Good job brother
@mtdracer695 жыл бұрын
Man!!! I wish I had one that thing is so cool
@chud3275 жыл бұрын
I can't wait to finish and use this one! Thanks so much and thanks for watching.
@RockeyDAproductions5 жыл бұрын
i just got my drivers permit, once i get a car and some property maby i can try such a build my self... just not yet.
@chud3275 жыл бұрын
You need to hurry up and find some thing to drive, maybe something that can haul Dinky. Then build you one too. Thanks of watching.
@chachito05124 жыл бұрын
This is so awesome
@JoaoBatista-ri1wi4 жыл бұрын
Muito bom.
@АлександрБарсуков-в1я5 жыл бұрын
👍👍👍👍👍👍👍👍👍👍👍👍
@chud3275 жыл бұрын
Thanks so much and thanks for watching.
@NICKSSHOP5 жыл бұрын
great video looks great nice job..
@chud3275 жыл бұрын
Thanks so much and thanks for watching.
@masterdanprice29045 жыл бұрын
Awesome
@chud3275 жыл бұрын
Thanks you so much and thanks for watching. BTW, I hope to start this boat later this week.
@roxastherogue5 жыл бұрын
85k! Great video chud
@roxastherogue5 жыл бұрын
I would use nut and bolts not screws for durability imo
@chud3275 жыл бұрын
Good idea!
@chud3275 жыл бұрын
IKR, I am loving the growth, I hope it keeps climbing. Thanks so much and thanks for watching.
@roxastherogue5 жыл бұрын
@@chud327 ya man, when you get really big dont forget about some of us, id like to say in touch chud. I enjoy hearing from you and Channels only grow faster and faster at this point. Maybe it'll be a full time gig soon
@chud3275 жыл бұрын
@@roxastherogue Not by choice, but I am doing it full time now already. I got fired last year from teaching and they won't even tell me why. Maybe if this keep growing and my patreon page take off, I will be aok. Thanks for the reply.
@CABALCANAL5 жыл бұрын
Show!!!!!!
@chud3275 жыл бұрын
Hopefully soon and thanks for watching.
@timmygilbert13715 жыл бұрын
How is # 2 coming along ?
@chud3275 жыл бұрын
I have bought some of the lumber and the barrels, but other projects have been getting in the way... I will get on it soon. Thanks for asking and for watching.
@camelcaat3 жыл бұрын
How much da whole set up cost
@chud3273 жыл бұрын
I spent about $350 on just the boat part, plus did some add ons after completing. The trailer was $200, one boat motor was $400 and the other homemade boat motor was $90. However, the price up lumber has skyrocketed lately and my prices would have been much higher if build today. Thanks for watching.
@บิ๊กจร3 жыл бұрын
แบบนี้ตั้งแคมป์ปิ้งบนรือ ได้เลยนะ
@chud327 Жыл бұрын
True and thanks for watching
@adijayachanel41544 жыл бұрын
Bagus
@Papatraning Жыл бұрын
Hi, can you share the measurements? Thanks
@chud327 Жыл бұрын
The boat was 8 feet wide and 13 feet 8 inches long. thanks for watching.
@Papatraning Жыл бұрын
@@chud327 Please, And how much weight does it support? How many people?
@chud327 Жыл бұрын
@@Papatraning I usually haul 5 people often. Each barrel is good for 400 pounds
@rogerflores50475 жыл бұрын
!MEN! YOU GUYS GENIU$$$$,HUMMMM
@chud3275 жыл бұрын
Thanks so much and thanks for watching.
@rogerflores50475 жыл бұрын
@@chud327 YOU GUYS !MEN!YOU GUYS HAVE TALENTS,GOD BLESS YOU AND YOUR FAMILY AND YOUR LAND
@christophereverett56953 жыл бұрын
il take that trailer if you want to get rid of it
@chud3273 жыл бұрын
I was luck to find it and now my boat is sitting on it...Sorry and good luck hunting one. thanks for watching.
@Sandramce605 жыл бұрын
Holy crap lol
@chud3275 жыл бұрын
Thanks so much and thanks for watching.
@janestewart51384 жыл бұрын
Dude, architectural screws, not deck screws. They will snap easy.
@chud3274 жыл бұрын
They never snapped as long as I owned the boat... thanks for watching.
@oldcroneysgarage97395 жыл бұрын
I'm getting my learners permit to drive I want to build a row boat just an idea
@chud3275 жыл бұрын
You can do it, both of it. Thanks for watching.
@mikeobryan83685 жыл бұрын
Hey I made a little two person barrel pontoon. I call it my fishing barge. It's on my channel.
@chud3275 жыл бұрын
I checked it out and it was sweet, I hope you will put it on the fb group "homemade barrel boats". Thanks for watching.
@mikeobryan83685 жыл бұрын
@@chud327 I'm one of the 4 people in the country who's not on Facebook. Your videos finally kicked me in the butt to make it so thanks!
@sawyermitchell62425 жыл бұрын
Why are you using a car when you have a truck
@chud3275 жыл бұрын
The truck has not been tagged and insured yet, maybe soon and thanks so much for watching.
@AMAURYPESCADORINVENTOR3 жыл бұрын
Funciona melhor motor RABETA longa 👍
@chud3273 жыл бұрын
In English? and thanks for watching.
@DirtyBikerBoyQT4 жыл бұрын
Chuddddddd you been working on this still brother?
@chud3274 жыл бұрын
Yes, worked on it today, should have something for you soon. Thanks for asking and for waiting.
@DirtyBikerBoyQT4 жыл бұрын
@@chud327 absolutely my man!
@steadyfishing36135 жыл бұрын
no offense chud, i thought you were gonna go harder on this build! like way harder, but its not to late
@steadyfishing36135 жыл бұрын
wait, this is the old boat isnt it? im dumb. apologies.
@chud3275 жыл бұрын
@@steadyfishing3613 no sweat, I do want to go harder on this and hopefully it will be easier doing it for a second time. I have to get past these daily storms so that I can get started. Thanks for watching.
@maddieleigh40775 жыл бұрын
hey mr fencik
@chud3275 жыл бұрын
Not much, how about you? Thanks so much for watching and I love the double comments.
@maddieleigh40775 жыл бұрын
chud327 is just doing school lol yhu know lol how come yhu don’t teach no more?, and lol 🤣
@kylerbritton78305 жыл бұрын
Puppy Glue!!
@chud3275 жыл бұрын
Works pretty good, thanks for watching.
@hannorasmusholtiegel60444 жыл бұрын
Hey,this is realy cool. How expensive where these barrels ,here where I live they arent cheap.
@rakim1263 жыл бұрын
looks like 25 per barrel used is the going rate on craigslist
@rayneman89494 жыл бұрын
I too like to play with lego
@chud3274 жыл бұрын
Me too, what does that have to do with this video? Thanks so much for watching.
@mefirst4266 Жыл бұрын
WHAT A DEATH TRAP !!!!!!!!!!!!
@chud327 Жыл бұрын
Maybe, good thing we have life jackets for you. Thanks for watching.
@ldtenenoff5 жыл бұрын
man kudos to monkey wards boats, just sayin
@chud3275 жыл бұрын
Funny, I was thinking about calling boat #2 "The Monkey Hunter"... thanks for watching.
@williambeckman69005 жыл бұрын
I don't see any propeller guard so you keep from slicing up those manatees.
@chud3275 жыл бұрын
There are none. They say to take it slow around manatees, my boat is the definition of slow. They should have time to get out of my way. thanks so much for watching.
@runnin_a_muck52075 жыл бұрын
Hey I got a mower
@chud3275 жыл бұрын
You are now in the club, what will you do first? Thanks for watching.
@runnin_a_muck52075 жыл бұрын
Well the dude already has it pully swapped and motor swapped it has something like a 23 hp Briggs on it but it doesn’t come with tires to I’m gonna probably weld some mower rims to atv rims and just run atv tires welding the rims will be my first mod
@chud3275 жыл бұрын
@@runnin_a_muck5207 Sounds like it is going to be a mean machine!
@runnin_a_muck52075 жыл бұрын
It should be I’m dropping 400 fillers on it so I hope
@runnin_a_muck52075 жыл бұрын
Btw if it’s not a bother could you give my channel a shoutout scooter be me
@cindyespinozac.23525 жыл бұрын
Chud let's get married
@chud3275 жыл бұрын
Sorry, I am already taken, but thanks for the offer. thanks for watching.
@pooparrow55 жыл бұрын
Wish i could give 100 likes for Johnson/Evinrude power. Cheers!
@chud3275 жыл бұрын
Evenrude and Johnson was what I was brought up on and I always lean that way... Thanks so much for watching and just saying 100 likes means something too.
@pooparrow55 жыл бұрын
@@chud327 Granddad has been a J/E dealer since the 80s. Glad to have one on our side lol. The vids are great man keep em comin