HOW TO RECOVER SILVER FROM CERAMIC CAPACITOR | CERAMIC CAPACITOR SILVER RECOVERY

Silver recovery from ceramic capacitor the easy way to extract silver, but take note, be sure to dissolved copper legs of this ceramic capacitor, because if not, your silver are precipitate and cement to this copper legs and you can filter it together with the burning ceramic, and in the end there is no silver in your solution because it has precipitated already, follow the steps and be sure to follow safety precautions wear acid resistant glove's, respiratory mask, or do it in open area or in a fume hood.

[@BullProspecting]

Great work!! I haven't done a silver recovery in years. I have three 5 gallon bucket of silver switches & relay to process. I just gotta do it.

[@PoorMiners321]

Wow.. nice brother thats huge of silver..

[@308dad8]

What will that turn into in ounces?

[@BullProspecting]

@@308dad8 few pounds

[@moondog4313]

What did you say that was you added after the water? I couldn't understand half of what you said after distilled water

[@nightscrapperuk13]

Keep going brother new subscriber here from England 🇬🇧 ,i also take the ceramic capacitors of pcbs ,nice silver and i loved the process part and final result 👍

[@PoorMiners321]

Thank you very much brothef and welcome to my channel from england I love your country..

[@حسبيالرب]

❤

[@vedantverma9673]

They make fool of you, all these capacitors have 2 gram of silver per kg… Dont waste your money and time on this video

[@PoorMiners321]

The sample shown is the modern electronic boards, but the first ones I got collected and accumulated from toshiba vintage tv's and other old electronics from the 90's have a high amount of silver, so if you think I'm doing things to fool people, you' re wrong, the problem is not my video and its result, the problem is your brain you always think that you are being fooled, so your brain has more negatives than positives.

[@PoorMiners321]

and maybe the procedure you use to measure the amount of silver is wrong, there are many losses in your process, In short, it depends on the year model of the electronics.

[@kamikazetom9785]

Very nice and clear video

[@PoorMiners321]

Thank you very much..

[@CandSMINING]

A good inexpensive way to recover silver from caps. New sub you. Thanks for sharing your knowledge with the community.😎😎⛏⛏🔥🔥

[@PoorMiners321]

Thank you very much brother..❤️

[@xvideodventurer4826]

Thank you for sharing this, if only i knew these facts sooner. 😢😢😢

[@PoorMiners321]

Thank you very much..

[@komanaydin]

Hello nice video but I dont Want To burn can I use sulfiric acid? İs it work?

[@PoorMiners321]

It works also brother sulfuric and few amount of nitric, but i think some epoxy resin melted and cemented to your beaker and difficult to remove, maybe use plastic bucket for easy work.

[@komanaydin]

@@PoorMiners321 thanks for information you won one friend

[@ihtsarl9115]

Thank you for this video good work you got 3 grams from howmany kilos of capacitors can you tell? And how about your work on gold from scrap electronics ?I am subscribing to your channel .

[@PoorMiners321]

Thanks brother sorry for late reply I'm doing something important that needs to be done right away. if i'm not forget that was only 1 kilograms, and about gold recovery its really awesome

[@shineyrocks390]

Solid Liquid Solid Amazing 👍 Silver price in the US right now is $28.10 USD per troy once

[@PoorMiners321]

Thank you very much..

[@colonialcharlie8702]

Best thing about this type of inorganic chemistry.... make something a solid to filter out, or make the rest solid and filter out 😂 There are a lot more options and retries. It often doesn't matter in what order you go. Here, I suggest converting to silver chloride first because palladium is in a few of these capacitors. Silver chloride (solid) can be filtered from palladium chloride (aqueous) That palladium chloride is best to save up, even if you just leave in waste bucket for now.

[@manuelferreira4345]

​@colonialcharlie8702 I have 105g of .999% palladium from 1 1970s tv

[@colonialcharlie8702]

@manuelferreira4345 owltech had a video clipping a stack of the large reddish tan clay capacitors off a few boards. They were loaded with palladium. With the clay ones you can use sodium hydroxide to dissolve the clay coating. They feel soft and not as smooth as the epoxy.

[@PoorMiners321]

@colonialcharlie8702 thanks brother

[@pacoblancosmith]

How clean is this silver? Any hazardous chemicals still in the mix after processing?

[@PoorMiners321]

After turning silver back into metalic state, no more chemicals leaving in the silver, and the purity 99.9 fine silver brother

[@theoriginalDirtybill]

do you recover the copper as well? i have about 100 lbs of capacitors, resistors, diodes etc... that i need to recover the metals from.

[@PoorMiners321]

Yes I recover copper because that is worth also money, but I accumulate the solution to get large amount.

[@curtmcdougal2842]

What do you add after you put it in the distilled water? I couldn't understand please let me know I was able to understand everything else

[@PoorMiners321]

Nitric acid brothrr

[@capiberra4118]

Interesting stuff, thanks for sharing. Cheers!

[@PoorMiners321]

Thank you brother..

[@warrenthunell2557]

What do you use as a filter on the bucket?

[@PoorMiners321]

That is polymer clothes, laboratory gown brother acid resistant, and heat resistant also

[@urbanprospecting]

thank you. I enjoy your videos very much.

[@PoorMiners321]

Thank you very much brother..💖

[@hardworkingamerican8847]

I need to do something like this with all the gold filled jewelry I have collected in 17 years of buying storage lockers . Pounds and pounds of it .

[@PoorMiners321]

Nice for you brother..

[@kevinjohnston1517]

need help with that?

[@dvinnyq2889]

I have done the same . Would you help me in the same way? I don't have all the equipment that's required.. I suppose you have already looked into this. I also have obtained a boat load of costume jewelry ect... from storage units. Maybe combine ours and ask someone like streetips if he'd be interested in making a video?

[@PoorMiners321]

yes brother, try it at streetips, maybe it will get your attention, you have nothing to lose by trying.

[@308dad8]

Watching I couldn’t make out what you were saying. What was the first thing you put the ashes in? Then what was the blue stuff you were electroplating the silver with?

[@realfamilyman]

Don't bother. 3.14 grams of silver is worth $5.25 Australian or $3.29 USD. Which wouldn't cover the cost of the chemicals and gas or electricity used to burn it. Not to mention your time and breathing in who knows what toxic chemicals from the crushed powder. You'd make more money, faster, and without having to offload tons of electronic waste afterwards for a handful of capacitors over several weeks (during which time you don't eat) than just standing in traffic offering to wash car windows, cashing in scrap metal (which you take to the depot on a bicycle trailer so no fuel costs eating your profits), or collecting soft drink bottles and aluminium cans, or any of a hundred other things would be more profitable. Clean toilets/windows/bins in an air conditioned shopping mall. It might be slightly profitable in a third world country where they steal electricity for free with an extension cord, but in most cases - what a waste of time and effort!. You may as well sell ice creams on a beach bought at a supermarket, then marked up 50 cents each. You'd only need to sell 11 in a week to break even. Sell 15-20 per day over a week and you'll have more money. You'd also get more $ from the copper in a couple of broken appliances like washing machines, dryers, broken scooters, etc. And again, no toxins, chemicals, or fuel required to burn stuff. The list goes on.

[@PoorMiners321]

Distilled water, potassium nitrate and sulfuric acid.

[@Frog0_Game]

Can you just make an electrolytic solution and use electrolysis to get the silver instead of using acid?

[@PoorMiners321]

Its dificult to make electrolyses without acid, for electrolyses you need at least 10% sulfuric acid.

[@Frog0_Game]

@@PoorMiners321 I am not sure about silver but I made solid copper coins off of 3d prints with just 50% white vinegar, 50% peroxide and an old transformer. Was enough to dissolve the copper pipes

[@christiannoporn9667]

That black cable attached to your copper bar ... does it have a function in the cementing process ?

[@PoorMiners321]

Nop there's no connection I tied up only for easy to fall the copper bar brother..

[@christiannoporn9667]

THX !!!

[@A.M.T.V.]

VERY COOL BRO! THANKS FOR SHARING!

[@PoorMiners321]

Thanks brother..

[@احمداحمد-ق8ع6ن]

Professor, could you please explain to me how to activate mercury?

[@احمداحمد-ق8ع6ن]

😢

[@PoorMiners321]

Mercury is always active brother, what do you mean to activate mercury?

[@fleshbag7754]

Yeah, i'm curious as well.

[@benpinder889]

Another great tip is to go out collecting and chopping firewood. Then, when you've collected a good amount, throw it in the bin 👍🏼

[@PoorMiners321]

Thank you brother..❤️❤️❤️

[@Bjawae]

Nice pi you made there

[@joewebster903]

At thirty dollars per ounce you have three dollars of silver and when you calculate the time and resources spent you end up at a negative profit of $44.88 USD

[@theonewhowas7709]

Most people don’t do this for the actual money…. But to stack up for a later date, like myself

[@RogLotHotHoW]

You forget this video also gets some payback. So the profit is positive😅

[@grokster9ontheroads174]

I wouldn’t do that unless I had a ton of material to process. You can reuse the silver nitrate solution quite a few times before you have to replenish it with fresh but you can do several runs with the same nitrate. That’s the only way to make it worth the while.

[@TechTrashCash]

If you found three bucks at the top of trash can would you throw it away? I appreciate shortsighted people all the more.

[@ScottSFitzgerald-j3c]

More like found 3$ in penny’s and was mixed all over the trash.

[@jenijeni-dt1ly]

Va urmaresc din Romania🇷🇴🇷🇴🇷🇴🇷🇴🇷🇴🇷🇴🇷🇴🇷🇴🇷🇴🇷🇴🇷🇴🇷🇴

[@PoorMiners321]

multumesc mult frate..❤️❤️❤️

[@dirkfrazier9779]

Awesome video. I've read about this and learned it because I want to know it, but other than in my mind, I have never seen solution A put into solution B and then dropped out of solution with a little zinc; watching how it drops out was simply amazing, and yes, a couple of filters. Like doing dishes, do you have a dry rack as you finish for organization? In your head, how would you lay something out to be cleaned and put out of the way as you go? And more importantly, what are you using as a torch? Propane isn't hot enough unless you buy MAP gas, and I don't know enough; I plan on buying an oxygen/acetoline welder, and I know that's a discussion in itself between being too hot and it working! depending on what you plan to do. What would you suggest from torch head to tank: regulators, hoses & miscellaneous? And gas? That could add up to a lot of welding rods and clamps. Maybe you have videos on this already; you have me interested. Thank you!

[@PoorMiners321]

I made some stock pots that I put in the acid that I used marked A, B, C, And the filter papers that I used I also saved, and the thinks that should be cleaned before storing them again, and the torch that I used for gold and silver will be melted by map gas because it's too hot, it's set when you buy it, the oxygen and acetylene is very good, but I can't afford to buy it right now, it's expensive here.

[@navrangstudio8273]

Dear friend Ferrous Sulphate (Iron sulphate) can be used to separate palladium and copper. as I don't have DMG if there is any other way let me know

[@PoorMiners321]

No does not recommended, for me that is very diffecult mixture brother, copper and palladium, try to precipitate palladium using ammonium chloride.

[@faithdubois5318]

I couldn't understand what you said when you added that first element into the powdered product and water

[@PoorMiners321]

Tips: You are showing curiosity, and if you want to learn something unfamiliar, write it into a piece of paper then proceed into a research..this is not difficult to understand cause I add subtitle in this video, that is potassium nitrate.

[@rixismetals]

I collect all of these when I strip circuit boards , when I have around 50kg of them I’ll be taking them to refinery to recover the precious metals

[@PoorMiners321]

Nice idea brother..

[@Hill-13]

Did you try and burn the ash again that was filtered out w/ the large folded filter paper ?

[@PoorMiners321]

Yes brother, I try it, the result I got few amounts of silver, and other stuff isn't reach the temperature of my torch and isn't melt maybe this are platinum or palladium, but I keep it right now

[@shubbz87]

Very enjoyable video.

[@PoorMiners321]

Thank you very much brother..

[@patrickwilliams4613]

Good video thank you

[@PoorMiners321]

Thank you very much brother

[@tntmadness3138]

Thank you.

[@PoorMiners321]

Thanks brother..

[@silver_salvage_savage]

Im collecting this type of materials right now. Red, brown, yellow, blue, green types. Would've thought they contained a little more silver. I hear some have platinum/ palladium?

[@PoorMiners321]

The palladium and platinum for the oldest type.

[@24KGOLDRECOVERY]

Excellent video bro

[@PoorMiners321]

Thank you very much..

[@mightandbelightnr2290]

So if you would guess how much silver is on one computer or on a TV?

[@PoorMiners321]

I'll update you brother, I'll look for my records about your question

[@josemariaperezrios6798]

¿Se puede usar el mismo procediniento para contactos electricos?tengo varios kilos

[@PoorMiners321]

Yes brother..

[@josemariaperezrios6798]

@@PoorMiners321 gracias amigo🤗

[@chippy33able]

Very nice , thanks eh

[@PoorMiners321]

Thank you very big💖

[@TreasureIslandCasting]

Very nice!

[@PoorMiners321]

Thank you very much brother

[@hectoracosta879]

Very good video my friend. 😁👍💯 I work this ..i need 1 kilo of Silver Is money money Yeah 😁👍💯

[@PoorMiners321]

Thank you very much brother..

[@jonasgeez2140]

Decent lil ammount of copper on that board to

[@PoorMiners321]

👍

[@DJEuphoria24]

I Like It For The Awesome Baby Elephant.🐘!! 🤘💪

[@PoorMiners321]

Thanks brother❤️❤️❤️

[@hankwilliams2761]

It cost more to process than the return. It's a net loss. ?

[@PoorMiners321]

No, i dont buy any acid that I used this work.

[@macfixer01]

Those parts on the board marked MV are not capacitors, they’re Metal Oxide Varistors. Besides the MV label on the board the only other way to tell is by actually reading the labeling on the part. They look similar to dipped ceramic capacitors and might even contain a little silver where the leads are connected? The square yellow part you show at the beginning is almost certainly a PTC fuse, not a capacitor. When they’re round they also look similar to capacitors, but again would have different markings. In that large square shape though they’re almost always PTC fuses. Since you already removed it from the board and don’t show the markings on the part, we can’t be sure though.

[@PoorMiners321]

Thanks bro..

[@joelong5525]

Just watvh the video and shut up mr know it all

[@dvinnyq2889]

Also there are many tantilum caps and if you can collect 1 pound of them undamaged, that's a good 100 buk on ebay. 2 pounds of broken = 100 buk. I could be wrong but it's possible some of the blue ones are tantilum. One way to tell is the polarity markings on the capacitor. The board is marked positive and the tantilum caps are also marking the positive contact. Regular (ceramic) caps have a dotted like indicating which side is the negative contact.

[@خالدالزعبي-ح5و]

هل اظفت الكهرباء مع سلك النحاس

[@PoorMiners321]

ولا بو كاباتيد

[@walacedeoliveira2418]

Todo este trabalho e gastos para obter 3.14gr de prata ?!!😮

[@PoorMiners321]

não há problema em estar cansado irmão, isso é normal na vida, o mais importante é que possamos dar as informações corretas sobre o que estamos passando, muito obrigado por assistir irmão, Deus abençoe

[@mehmetoncu2619]

Teşekkürler

[@PoorMiners321]

❤️❤️❤️

[@bruceewan3914]

Amazing

[@PoorMiners321]

Thank you very much..

[@brunobeani5577]

Ciao nella barra di rame che tensione passa 12volt

[@PoorMiners321]

Qui non usiamo l'elettricità, fratello, solo una barra di rame puro

[@coolbreeze6198]

Pretty cool 😎

[@PoorMiners321]

Thanks brother

[@william1863]

Good for you in your recovery efforts. Selah 💔✝️❤️‍🩹👍💖✌️ SHALOM

[@PoorMiners321]

Thank you brother,

[@kurtremislettmyr7108]

what was the price for the acid you used?

[@PoorMiners321]

I don' buy acid brother, I made my own. Potassiun nitrate and sulfuric acid.

[@kurtremislettmyr7108]

@@PoorMiners321 that's nice 😁 did you make a video on how, and the ratios and stuff? I'd watch that.

[@deadpresident78]

@@PoorMiners321 So how much did the chemicals cost to make your oun???

[@PoorMiners321]

1kls potassium nitrate Php500 pesos $8.6 1L sulfuric acid Php180 $3.10 Can produce 700ml 65% concentrations nitric acid $8.6 + $3.10 = $11.7 In 700ml of 65% nitric acid can do a lot brother.

[@clarencementor4862]

What is the name of the acid that you use? Is it Hydrogen Peroxide or Nitric Acid?

[@PoorMiners321]

Nitric acid brother

[@lailamatpq4840]

ارنا كيغ نستخرج الفضه من الاحجار وشكرا لك

[@PoorMiners321]

Soon brother..

[@wojtekkowal2652]

Why do not to cut legs before ?

[@PoorMiners321]

Some legs contain silver also brother.

[@chrismartinez7342]

Hello my friend I like your videos very helpful but I cannot understand your English , I mean no disrespect to you . I ask if there is any way that you can using captions or of you can slow your speech down to where I can understand you ... Thank you ... And thank you for your videos

[@PoorMiners321]

Ah ok thats visayan accent brother, if you want to see caption click cc on the upper right in this video

[@superwolf32]

Hello, thank you for your video. I have some question to ask you. Does your method work with transistors and silver plated cutlery. And you definitely need a piece of solid copper or a piece of pipe, it can work. Thank you in advance for your feedback.

[@PoorMiners321]

Sorry for late reply I only like your questions, but anyway, Silver plated with large amount of base metal you need to separate process brother, but same precipitaions.

[@originalsupermommy]

This has third world Sreetips vibez. Nice!

[@PoorMiners321]

Thank you very much brother..

[@ewaste-jd-preciousmetals3723]

Nice you also watch sreetips.

[@NyDieselOwnage]

what are those yellow square capacitors anything metals in there worth it?

[@PoorMiners321]

Silver, if large amount then it worth

[@dvinnyq2889]

@NyDieselOwnage There are tantilum capacitors that don't need refining or anything whatsoever, except bag em up and according to the gross vs net produced in this video, tantilum is a no brainer.

[@Man-in-da-shed]

That was interesting

[@PoorMiners321]

Thank you brother

[@deadpresident78]

great 1 dollars worth of silver if you can get someone to buy it. Amalgamation is cool but doing this it will break the bank, it cost a lot compared to the effort and the return. The US has around 800 to 900 thousand metric tons left in the soil. That is 900,000 x 2500 pounds of silver left to mine. That is our country only and not the rest of the world. This is why smart people have no care for silver. It will be our next copper..

[@keithwizzard1722]

The amount left in the soil is based on the entire land area of the usa and 99% of the silver in the ground occurs at concentrations less than 80 parts per billion which will never be economically viable let alone the destruction and removal to every inch of infrastructure to get to it. A metric ton is 1000 kilos or 2200lbs. These capacitors at least have some appreciable amount of silver especially compared to ordinary dirt.

[@PoorMiners321]

Woow.. thanks brother, that's why even in small amount of silver need to save in the future the price will be raise..

[@rmrracz9877]

Estados unidos es basura a nadie le importa su opinion y nadie quiere sus dolares sucios. Malditos

[@stevemitchell1345]

Some people,or should I say,many people do things just to see if they can. Or do things as a hobby to fertilize their brain. I try to do ,you name it ,only to see if I can. Could give a s_ _ t of it cost a few dollars. I am interested in what makes it happen and not the bad dream of becoming rich.

[@electrionics]

Electrolytic capacitors all having silver?

[@Larry-toolreviewcenter]

Great video,but the chemicals and map has cost more than you made silver is like 50 cents a gram

[@PoorMiners321]

Thanks brother, to get this work profitable, you need to make your own acid, don't buy acid, that is too expensive, the ingredients of making acid are too cheap.

[@kt6643]

I liked all the ants running around 😂

[@PoorMiners321]

🤣

[@kevinheske7783]

I think you need some Raid and get rid of the little pests on your bench.

[@PoorMiners321]

🙏

[@garymyers6638]

You keep chickens at you workshop

[@PoorMiners321]

No Thats 50m away, my mic is very sensitive to detect sound around.

[@บุหงาพุมมาลา]

สุดยอดมากค่ะ

[@PoorMiners321]

Thank you very much brother..

[@douglasfernandes5531]

Adorei o bebê elefante 😂

[@PoorMiners321]

muito obrigado mano

[@SURFEAMORETERNO]

Alguns capacitores amarelos contém Tântalo.

[@PoorMiners321]

Yes brother.. thank you..

[@زايدالدويري]

Beautiful❤

[@PoorMiners321]

Thanks brother..

[@mr.perfect1er]

Seems like the nitric acid cost more than the recovery of silver.... 🤔

[@PoorMiners321]

no brother 100grams of potassium nitrate and 100ml of sulfuric acid haven't even been used up yet, because I made my self hno3

[@scrapping4shiba]

You don't show them in your thumbnail, but you show them when you weigh them and when you burn them. The square "thicker" ones, with like a white gel on the bottom side, between the legs. I've been throwing them away. Those contain silver too?

[@PoorMiners321]

That's containing silver too brother..

[@M.H.Golden-life]

Please recover palladium

[@PoorMiners321]

Soon brother..

[@karlbe8414]

I just checked the silver gram price. $,90 USD, so , $2.83 for your 3.14g of Ag. I am wondering how much your HNO3 cost?

[@PoorMiners321]

I don't buy hno3 cause I made my self, 100g worth php50 potassium nitrate kno3 produces 48 ml 140ml sulfuric acid H2SO4 php35 50+35=85 Php85/Usd58.45= Total cost $1.45

[@karlbe8414]

@@PoorMiners321 Outstanding! Have you made a video of your HNO3 production method? I see that you corrected the grammar in your title! Your English is better than my Tagalog. I expect some Pd is mixed in your Ag, but, there could be worse contaminants. I see those capacitors all the time, but haven't been saving them...

[@fivetwoeight528]

Urban miners 👍

[@PoorMiners321]

Thank you very much❤️

[@dimon-73]

1% с 400грамм материала, даже заморачиваться не стоит. Расходы будут дороже чем серебро. А так видос интересный, спасибо за информацию

[@ivanmobile65rossi80]

While waiting for your kind response to this comment, I wanted to ask you what degree of purity we obtain with your procedure

[@PoorMiners321]

I think 98% to 99% silver.

[@kevinsturgess1475]

👍

[@Евгений-к5х-в6ж]

Здравствуйте не думал что этот материал что-то содержит я был удевлен

[@PoorMiners321]

Да, брат, и это еще не все, в транзисторах тоже есть золото, посмотрите наше видео, мы не будем использовать кислоту, чтобы получить золото, пожалуйста, подпишитесь на этот канал и нажмите на значок колокольчика, чтобы быть в курсе, когда мы выпустим видео.

[@Евгений-к5х-в6ж]

​@@PoorMiners321да снять позолоту можно китайским реагентом золотая цыкада

[@ivanmobile65rossi80]

Hi I opened different types of capacitors as in your video and testing with a reagent that responds to silver I found no trace of silver, why? I tried the blue, black, brown and green capacitors.

[@PoorMiners321]

I don't know what kind of reagent you used, but this capcitor I collected are mostly from analog old tv board, which is from 70's 80's 90's. There are many ways you can test the presence of silver in the solution which is available online, I'm not the only one who made this kind of video, there are also many on youtube, if new electronic board try to see the marking, if MV mark besides that is not capacitor according to our one viewers here, try to scroll down hes comment, and try to find sreetips video on how to test the presence of silver in solutions.

[@Rolly-x1v]

That's what was put into the green water, copper bars, bro.

[@PoorMiners321]

Yes brother, brother thats solid copper bar.

[@0987brian]

3 .2 grams = $3.10 Nice for a hobby but timer materials it's a waste I like the video

[@PoorMiners321]

Thanks brother.

[@KIENTHOCHANNEL]

Tuyệt vời.video rất hữu ích.chúc bạn sức khỏe.và may mắn.chúc kênh của bạn phát triển tốt.

[@PoorMiners321]

Thank you very much brother..

[@MaricarAlfonso-y8k]

Boss nag pm Po ako sau about s sodium metabisulphate...p send Po sn ng pic nya ung sinabi mo n made in Germany Boss.. pwede Po please 🙏😭🥺

[@PoorMiners321]

Ok boss check ko mamaya ha

[@احمداحمد-ق8ع6ن]

It did not react with dirt containing gold.

[@PoorMiners321]

Ah ok actually the mercury isn't react to a gold complexes brother, if gold mix with other minerals, the mercury isn't react with that, so you need to grind into a very fine powder.

[@RomeKeith-cm4ve]

how much did it cost to get 2 dollars of silver

[@PoorMiners321]

The materials is free, ang acid cost less than 30 pesos, and i think a few knowledge is worth thousand of dollar.

[@scott.c9587]

Do something with the ants man😂

[@PoorMiners321]

🤣🤣🤣

[@Portugalisrotten]

Some of those are called Varistors, not capacitors

[@PoorMiners321]

Thanks brother..

[@GURMEETSINGH-ke1xc]

There is more valueable pladium then silver inside those capacitors

[@PoorMiners321]

Yes thats correct brother❤️

[@muhammetsarac1783]

Kardeşim 400 gr malzemeden çıkan gümüş en yüksek ayarda olsa dahi malzemesi ve işçiliğini kurtarmaz 3.17 gr çok düşük gümüş fiyatı belli

[@PoorMiners321]

Teşekkür ederim kardeşim, bu videoda gümüşü geri kazanmanın başka bir yolunu gösterdim, gümüşün fiyatı arttığında onu da yakında kullanabiliriz.

[@WoolfVision2]

Why so many ants on the table?

[@PoorMiners321]

I don't know brother, at first there was nothing, but when I turned on the camera, it suddenly appeared.

[@Randy-q2d]

They are interested in learning silver recovery,😂

[@PoorMiners321]

🤣🤣🤣

[@FredrikWonWachenfeldt]

❤

[@STo-hv1gv]

join gaes

[@yardmine]

that's how you get ants

[@PoorMiners321]

❤️

[@OndřejJelínek-l9q]

bro got pi silver

[@PoorMiners321]

Thanks brother

[@joseantoniolopez2211]

Le faltó metalizarla

[@PoorMiners321]

non è necessario convertire l'argento precipitato dal rame, è un metallo argentato che è argento puro al 98%.

[@loveisalliam]

Place a damp folded old rag over the flask to absorb and limit the fumes. Much more environmentally and safe for you .

[@PoorMiners321]

Thank you very much brother..❤️

[@pirobot668beta]

Rag made damp with Baking Soda solution...neutralizes acidic vapors.

[@victimovtalent6036]

The ants are they assisting you?😅

[@PoorMiners321]

yes, they suddenly came out of the side and came back as if they were taking a picture haha

[@krakenseamonster7683]

i cannot understand what your mumbling ... are you Spanish ?

[@PoorMiners321]

🙏 my voice are too clear and if didn't understand, turn on cc in the top corner in this video.

[@mcvandersluijs6130]

You get more. From 410 gram silver plate😂

[@michaeltrone616]

Too much HNO3 and not enough water in your reaction.

[@PoorMiners321]

ah, that's the right mixture for me because there are copper base metals, so the silver isn't precipitate, in the end there's no losses.

[@michaeltrone616]

@@PoorMiners321 Cu is dissolved prefrentially before Ag in heterogenous reactions. No matter your acid to water ratio, the copper must be used up before all Ag can go into solution. In order for that to happen, there must be somewhere for the dissolved metals to go... i.e. water. Also, for the few grams of metals in these capacitors, you used way too much acid. Its why your cement silver was floating and why you got a reaction when inserting the copper bus bar to drop the silver.

[@PoorMiners321]

You know already that it takes 4.15 ml of 67-70% nitric acid to dissolve 1 gram of pure copper and i think the copper base metal in my material is higher than silver contain, so it is better to have an excess of nitric rather than lacking, and I don't have encounter any problem if there is excess hno3.