Tips to achieve excellent results with cheaper guns split nozzle vs regular nozzle

[@joewolf4483]

I have to agree ... I like the idea of less overspray ... nice to see you all covered up ... don't wanna see anything happen to the triggerman ...

[@thetriggerman954]

I'm trying to get better with covering up 🙏🏼 thank you Joe

[@UndergroundPaintKing]

🔥 video Triggerman, I gotta spray with that split nozzle and see what I can do with it 💯💪🏾

[@thetriggerman954]

The People Champ in the Muddafkn house 🫡 yeah champ you gotta try one you already made green candy out of a non split nozzle so we scared to see what you do with that SPLIT 🪓 nozzle LETS GOOOO 🏆💯 thank you brother

[@IzzyH20-u2e]

Yall brothas need a collab video for the one time

[@davidshareefChTPhD]

The black guns transfer efficiency is mind-blowing! There was hardly know overspray at all!😊😊😊😊😊

[@thetriggerman954]

@@davidshareefChTPhD 🫡🫡

[@douglasthompso]

I like both, man this is a tuff one to pick without spraying with each. You make it look too easy, as always great job.

[@thetriggerman954]

Thank you Doug, yeah man it was a tough one. But when spraying them PRD just has that feel that you can't help but to like.

[@bosshawg7427]

Like you said, it's all in preference and what you're comfortable with. Out of my small stash of guns, I've finally found a combo that allows me to lay down clear with good results. Not that the other guns are less capable, but rather just easier for me to set up one in particular with full fan, full fluid, moderate pressure to get consistent results when spraying a MS clear.

[@thetriggerman954]

Exactly, what your comfortable with and that's in your budget. ✊🏻😎 BossHawg in the house

[@billbeckett1021]

I was clearing with my 717 this afternoon. The split nozzle is amazing!

[@thetriggerman954]

Yeah man them things are niceeee 👊🏼

[@billbeckett1021]

Shot clear with it this morning. Dropped the pressure to 20 and man did the clear flow nicely. Haven’t had this much fun spraying since I shot my SATA 90 back in the day.

[@thetriggerman954]

@@billbeckett1021 ahhh it's the little things make us happy 😎😂 good stuff. Spray on brother spray on 🤙🏼

[@ericbrown-ti5kb]

Triggerman that was a hard battle and call to make..both side came out with a knockout..but I did notice you were spraying faster with the black gun..and as usual we all enjoy your videos..and the lessons you teach..good job my brother.😊😊

[@thetriggerman954]

Thank you Eric, so in your opinion would the black gun be better for you? And yes it was a tough call. 😂

[@michaelchrist26]

The videos are dope brother keep them coming, watching from CT, I’m learning a lot from your work man 💪🏽 definitely appreciate everything!!!

[@thetriggerman954]

Appreciate that, and you got it man ✊🏻😎

[@iainportalupi]

I like these comparison videos. It would be cool to see one of these modern guns up against a classic like the Binks #7.

[@thetriggerman954]

Ohhhh you trying to go there? Lol yes that would be kinda cool. Even though my Binks #7 was stolen I have a few classics we can play with. 💪🏼

[@bradleyyounger8499]

That is what I used back in the day.. binks was the shit.. I don't hear about them anymore. It would spray like glass but tons of material waisted lol

[@iainportalupi]

@@thetriggerman954 someone stole yours? That sucks. I’ve got a first generation Binks 7 from 1937 I’d send to you for the video.

[@thetriggerman954]

@@iainportalupi yeah man my car was stolen from the vocational school parking lot and I had my Binks #7 in the car. Dam you have a gun from way back then? Holy moly that's a real classic there. I Have to Google that and see what it looks like. Cool

[@thetriggerman954]

@@bradleyyounger8499 facts

[@bradsrestorations1085]

You make it look easy with either gun!

[@thetriggerman954]

It can be done Brad. Who the man 🫵🏼 the man 🤜🏼🤛🏼

[@robertorivera6958]

wow triggerman : amazing show of the 2 guns ,,,,,, it can not be more clear than that ,,, you went right to the point on each gun give us the pressure ,the speed , and your real time opinion ,,, hello if any body have a problem with that ,,,,, just go see a mental health doctor an get your mind in order ,,,, great job like always ,,,,,

[@thetriggerman954]

Thank you Roberto I appreciate it man. And I agree if they can't get it from that breakdown might need to go get their heads checked out 😝🤣 thanks again man

[@leviscott8519]

Nice comparison Trigger! That Porphis PRD 617 looks to be a Great Gun! Will be my first split tip gun. Thank you Brother! Could always use a flatter finish and This Gun will likely get me glassy. Good advice on guin adjustments. I always turn my fluid down a bit to keep from runs and sags. I will try and spray a little faster and keep the fluid turned up a bit more and see how it goes. I am usually below temp when I spray around 50-70 F

[@thetriggerman954]

Whaaaat up man. Thank you hope the tips help and the gun should definitely help to get you Glassy 😎💪🏼

[@wrightsrrt871]

Like how you keep it real with the bumper fender situation 💯

[@thetriggerman954]

Yea man. We're all human. I screw up and not afraid to show it. ❤️💯 Thank you

[@kingsway731]

Thanks for the demos! I looked at the website its difficult to compare them. Not a lot of info.

[@thetriggerman954]

You're more than welcome. Trying to help you guys making informed decision in case you do decide to purchase one I know how it feels to buy something blindly not knowing what to expect and then it is not even what you expected. So I'm glad the videos help 🫡❤️

[@Snip59]

Love the Vibe Trigger indeed all comes down to Prep before anything when it comes to paint indeed looking forward to the next clip Trigger Phil in sydney.

[@thetriggerman954]

Thank you Phil that's true you can't get a good paint job with bad prep BUT, you can get a bad paint job with good prep if the skills aren't there 🤔🫣🤣

[@Snip59]

@@thetriggerman954100% Trigger im just a DIY do my best i spend more time on Prep bit OCD for me i guess love your straight talk Trigger helps a lot.

[@thetriggerman954]

@@Snip59 thanks right my man. No fluff stuff here. But prep is definitely I'd say 70%

[@TheIrvingsylva]

BIGG-UPS to take Trigg….u making my learning experience 💯

[@thetriggerman954]

Good to hear man, very good to hear I'm glad you're learning and glad you're having fun. That's what it's all about ❤️

[@nickcrill7718]

Your two guns 1 cup series I really enjoy! Bet other painters won’t try it. My bet is on the phs155 the black one.

[@thetriggerman954]

You never know, some of them copy cat suckers will do anything for a hit. But I'm glad you guys are enjoying it. I get so many DM's on guns to battle. Guns that I don't even own 🤣

[@nickcrill7718]

@@thetriggerman954 I bet! There’s a lot of guns out there! You’ve me not want the dv1 haha

[@rockycaruso387]

Another educational and fun video.. Looking solid

[@thetriggerman954]

Yooo What up Rocky thank you brother. Glad you enjoyed 💪🏼

[@rockycaruso387]

@@thetriggerman954 Hell Yeah.. 💯🤪.. I was at my buddies and he let me play with his throw aways.. I used a Areopro 610 and a TCP Global G6600-13 .. Had fun putting on sealer and base..

[@MRbuffaloBILL]

Vibing with these side by side wars 😅…. You 100% correct, it’s just a spray gun!! Been having fun with the Astro EUROHE103 EuroPro …been pushing that thing , just did a whole side LA7W love that lil demon 😮‍💨

[@thetriggerman954]

Yeah man them Astros are the O.G's I still have a Astro mini I bought in 2006 it's the main mini gun at the shop I let everyone use it incase they mess it up, but I won't die 🤣😂💪🏼

[@sideshowscot7815]

Another amazing video trigger. I got my porphis the other week. I got the larger PRD 717 VS . I would love to see the 717 HVLP reviewed as I'm after something that can move 2k commercial paints and get a good finish. Great content on both channels. Spray on brother 🤜🤛

[@thetriggerman954]

Thank you Scot. Man they have so many guns I can't even keep up with these numbers. They are all starting to sound the same 🤣🤣 I'll demo whatever they send me though

[@shaqhobson5074]

In the booth the blue side looked a little more slick but in the sun you can't really tell the difference.

[@thetriggerman954]

Yep outside in the sun you could hardly see any different. 🤔 Lol

[@luismelendez935]

Great video man, im planning to buy a compressor and start painting. What was the set up you have them

[@thetriggerman954]

we have a huge compressor out back 80 gallon 10hp older than me but huge 😂

[@JohnWD40TC02]

Great video again Trigger I do like the 2 guns 1 cup shootout where the only difference is the guns as it's the same car and same paint👏these split tip guns always seem to be slower than the normal tip ones which is probably due to the split tips atomising the paint better🤔I thought the split tip tech was the better gun as well as you say it was more controllable and less overspray. I'm currently testing the Porphis WP99 1.4 which is a split tip and a side cup setup and I find that slower than some of my 1.2 or 1.3 normal guns🙏👍John UK

[@thetriggerman954]

Thank you for chiming in John Wp99 never heard of that one. Man they have so many guns. I'm trying to help the guys make an informed decision incase they do decide to purchase one. But I'll have to look into that one. Thanks man 🙏🏼❤️

[@JohnWD40TC02]

I think Porphis do more guns than they put on their site so I think if you ask them they might send you a full list of what they do, that's what I've been told anyway. It was Pete's Hobbies that sent me this gun to try out I think he has nearly all of them😬😆😆

[@diggy561]

I need to come by for a quote to spray my friend's Impala, but just the hood and trunk. 😅

[@thetriggerman954]

Lmao man go head on with that shit. And let me guess. Just gonna bring the parts separate 🤣🤣 damn Bonk

[@Snip59]

On the money Trigger practice & practice for us DIY.

[@kr2513]

I figured out their website calls split nozzles the “VS type”. Not a horrible website but they could use some work. Iwata must not have a patent on the split nozzle, but then again I knew a guy with an old walcom that had a split nozzle very confusing stuff!

[@thetriggerman954]

Patent probably ran out. I think they have expiration dates. It all can get confusing and overwhelming lol

[@anthonysalcido5645]

Nice commentary " IN THIS CORNER" 🥊😉lol ..let the throw down begin 👊

[@thetriggerman954]

Thanks man. Just trying to spice things up make it fun for everyone. I appreciate you Anthony 🙏🏼❤️

[@richarcruz7843]

Big ups 💪🏽💪🏽💪🏽💪🏽💪🏽TriggerMan split nozzle is by far now let’s not get it twisted both great guns💪🏽💪🏽💪🏽💪🏽

[@thetriggerman954]

Yes sir indeed they are. But only one an take home the Trophy 🏆💪🏼

[@flatwooodsdaddy3476]

What model regulator do you use and does it have a glass lens. My current lens is plastic and solvent messes lens up when I tried to clean clear coat overspray off.

[@thetriggerman954]

@@flatwooodsdaddy3476 I only use this one devilbiss regulator and yes it's glass, I have like 30 of them or more lol 👇🏼 www.amazon.com/dp/B000M1DCQ6/ref=cm_sw_r_as_gl_apa_gl_i_8CCVBZNZV92XQ1VJ3WM3?linkCode=ml2&tag=thetriggerman-20

[@robertdeleon588]

Great job bro, Im not as fast as you which one would you recommend me I like them both

[@thetriggerman954]

Thank you man. The split nozzle is definitely the way to go. 🫡

[@Boss-o9p9t]

What PSI pressure on gun would be ideal to spray like 26-29 psi? For less orange peel or certain paints need more pressure than other paints?

[@thetriggerman954]

Slightly higher PSI, wetter application, but remember you have to do the same thing from the ground up. So sealer, and base have to be applied with minimal peel for you to have the best results. And as for your PSI it all depends on the spray gun put on most decent guns right around 28 psi is good. Some require a little more some require a little less

[@JMMedia]

Trigger man can you do a comparison vid of the prd 717 and the prd 627? Put both of of the Porphis split nozzles against each other

[@thetriggerman954]

You got it man. Got it on the to do list so within a week or so 💪🏼😎

[@JMMedia]

@@thetriggerman954 Hell yeah. I’ve already ordered a 627 but I might have to get a 717 as well haha

[@thetriggerman954]

Inthe works already. Thank you for the suggestion 😎👊🏼

[@ChrisMTech]

Love your work… just curious how does the Phs-155 compare to the HF black widow 2.0?

[@thetriggerman954]

@@ChrisMTech thank you Chris. To be honest They are very similar not a whole lot of difference of any in my opinion. Both appear to be well made guns.

[@bensturma6631]

So whats the difference between the 2 split nozzles? 717 vs 627. Thanks for the video!

[@thetriggerman954]

Working on the next installment of 2g 1C with both guns. We'll all determine that together. I have only sprayed each gun once so not really enough time to say. But I'm working on it. And thank you ❤️

[@Michigunner]

How did you split the bumper, they are usually connected. Hate those bumpers. Make it much easier not flopping on a stand

[@thetriggerman954]

Man we were sanding it and it kept flipping around I told the bodyman to put it back in. I'm not sure what he did. But that shit was driving my prepper crazy while sanding and priming. 😭

[@Michigunner]

Drives me nuts also. Nice job

[@kevintinsley4158]

PRD . But you have the experience to make the best of both guns . 💪

[@thetriggerman954]

💪🏼❤️

[@davutyalcin-]

Jo trigger. I liked even before i watche the video 😅 Great video as usual brother

[@thetriggerman954]

I appreciate that my man 🙏🏼😊

[@IxACTiiONzZxI]

Trigga.. hey what kind of dryer are u running for the compressor for no water or oil coming out ... Excellent job...from n. hollywood ca!!!

[@thetriggerman954]

Believe it or not this is the only things in the booth. And the compressor is old and oily. Not sure if it's because the booth is old and the piping is ran through the walls maybe that cuts down on the moisture in the pipe but I never get water or oil. amzn.to/4aP2h9A

[@IxACTiiONzZxI]

Just that?? Ok cool one more question how many feet of pipping you got more o less ... and thanks again trigga.. u should do a quick video on that.. i thaught u used some expensive dryers... u da man

[@treysterthepainterturner8404]

Not bad for the pricing. The guns look good too.

[@thetriggerman954]

Spray good, price good, looks good. But one ugly ass name 😂😂 👊🏼

[@treysterthepainterturner8404]

@@thetriggerman954 haha. Porphis!!!

[@OldBondoBilly]

Not the Wuhan!!🤣🤣🤣

[@thetriggerman954]

🤣🤣🙈 😷😷😷

[@OldBondoBilly]

@@thetriggerman954 you can spray with one of those guns if you got your herpes vaccination😂😂

[@thetriggerman954]

@@OldBondoBilly damn 🫣 😅 you a wild man

[@jamesbigica-b5m]

those milton fittings wear out fast brother

[@thetriggerman954]

Thanks man. I normally use Devilbiss fittings. But these guns I demo they don't get as much use as my other guns. But good to know, I picked up a box of 20 on Amazon too try out. I'll watch them closely 😎🤙🏼💪🏼

[@thebigbravo3529]

Bless Up brethren! Big Trigger on the 1 and 2 killin em softly with 2 guns. Great video as usual 👌. I bought the Rhino mask and 3m filter you recommended. Now im looking for a protecting paint suit. You got any recommendations? Also I will be looking into one of the Porphis you showcased. Would you recommended having a separate gun for primer or 1 gun can do it all?

[@thetriggerman954]

Big up ✊🏻 Big Bravo. Good man you're all set with the mask. And for the paint suit I personally prefer the lab coat/ paint suit. I can't wear them whole shit head to toe. Lol this the one I use comes with detachable head/hood too amzn.to/3WhebV8 And as far as the spray gun I think either of those split nozzle guns will work. And definitely use a separate cheapy gun for primer. Man we use a $30 primer gun at the shop after a year or two we just tossed it and get another one. Those primer guns get abused, Plus the primer goes on thick and heavy and you're going to block it down anyway so it doesn't have to be an expensive gun. If you need any recommendation or advice on anything else don't hesitate to ask. I appreciate your support. Stay blessed 🙏🏼

[@thebigbravo3529]

@thetriggerman954 1000 Respect to you, brother. I appreciate all the advice. Being new to the game, it is a blessing to get guidance from a pro like yourself. Big Trigger painting spaceships on the moon! Go get em 💪.

[@thebigbravo3529]

Yo waddup Big Trigger! Blessings, brother. I've been following your script and just purchased the Porphis 717 today. I need some advice on a good regulator and / or any other accessories that I should get for the gun. Thanks again.

[@thetriggerman954]

@@thebigbravo3529 what up my man. I personally like a particular Devilbiss regulator. You just want to make sure you get a decent brand because that's going to tell you that you're at the correct pressure, also whichever regulator you do select try to make sure you use that same regulator on all of your guns that way everything is always the same You can always take a quick glance at it and know what it reads just makes life easier. But any decent brand regulator should be fine. Devilbiss, Sata jet, ANI makes a pretty cool looking regulator I've never used one but I like the way they look. This is the one I use I have like 30 of them amzn.to/3JA3VzX

[@thebigbravo3529]

@thetriggerman954 Respect brother! Thank you for the advice.

[@donovanreed4400]

Would you recommend for sealer as well?

[@thetriggerman954]

Singer gives you a little extra security but it's really not a huge deal in my opinion. If you're using cheap paint it might be a good idea

[@mitheshdeendayal7498]

The blue gun sprayed a bit better, coz less overspray. And it laid the paint a little slower.

[@thetriggerman954]

🤔 so PRD for the win 🤔

[@supaflybigdog]

Hey whats up Triggerman. Can you do a video or your top budget guns? if not can you just rank your top 5

[@thetriggerman954]

You got it man. I'll throw it into the mix. I have about 5 videos already set to release so it'll be a little while but I'll definitely start working on it 💪🏼

[@Erik7prc]

"Yall know i get all my coverage in my first coat" 😄

[@thetriggerman954]

🫣

[@dostuffchannel]

That split nozzle!

[@thetriggerman954]

Split nozzle splitting that clear up nice

[@KJsGarage]

627 over the 717?

[@thetriggerman954]

Gonna have to run the match and see 🥊🥊 stay tuned

[@davidevans212]

great comparison........but im checking out your skillz.......Man you don't play with em,that base coverage super fast!

[@thetriggerman954]

No need in playing with them David. Get em in wet em up and get em out 😂 thanks man glad you enjoyed the video 💪🏼

[@arthurresendez]

Two guns one cup!!!! Nice one

[@thetriggerman954]

💪🏼👊🏼 thank you Arthur 🙂

[@stefanss94]

Triggerman, can you pls do a video on the sagola mini xtreme 1.2 😀👍

[@thetriggerman954]

Lol ok will do. We Gotta ask them to send me one to try 😲🫣

[@stefanss94]

@@thetriggerman954 @sagola hook triggerman up!!

[@frankvalencia9227]

Hey trigger I’m in the market for one of those porphis guns with the split tip which one you think I should get the 717 or 627? I’ve never sprayed a split tip gun so I’m excited

[@thetriggerman954]

They both are pretty similar. That 717 is really nice. I'd probably go for that one.

[@frankvalencia9227]

@@thetriggerman954 Thx man

[@shogun10241024]

I'm back Hey Trigger, you outta check out the new Dram spray gun from Taiwan, it's an Iwata clone that's a mix of the LPH-400-lv4 and a Kiwami 4 WBX. Amazing for sub $100 imo

[@thetriggerman954]

Hmmm 🤔 let me check this out. Gonna look at it now, it does look interesting. Hopefully they'll send me one 😉😂

[@robertdeleon588]

Do you recommend the PRD 717?

[@thetriggerman954]

Yes definitely. Awesome gun

[@themosthighpaint2701]

I just purchased the lph400. what is your recommended pressure you like to spray clear with this gun? I know you have had one for a long time. I also know you don't like this question but can you help me out please? 😂

[@thetriggerman954]

Lol 😂 good to know you're paying attention. I spray clear between 20-22psi sometimes I'll go up to 24psi if I really want to get a super slick finish. Also remember I spray a 1.4 which isn't all that common. So there are different things factor in when asking " what pressure" I also have a 1.3 setup for cold weather but I don't spray it enough to even remember what PSI I set it at.

[@themosthighpaint2701]

@thetriggerman954 I also have the 1.4 tip, I live in Los Angeles so the weather is pretty warm most of the time. The are caps at 16 PSI but I felt like that was a little low for clear and didn't want to have to play with it too much before I put it to work. I knew you were really familiar with this gun since you say you had it about 20 years so figured you could help me get going quicker with this one. I appreciate you taking the time to help me out 🤙

[@thetriggerman954]

@@themosthighpaint2701 No problem brother And also I use the silver cap.

[@themosthighpaint2701]

Okay cool I got the silver cap also got another one with an orange cap two of these guns

[@imrefratilla922]

Also what type of clear are you using

[@thetriggerman954]

@@imrefratilla922 are you Am-Tech clear. It's a product by ProsPray. Going on 12 years and no issues there's a link if you want to check into it. 👇🏼 amzn.to/4cqtorw

[@imrefratilla922]

@@thetriggerman954 awesome thanks

[@dogstrucksnotherstuff]

Nice! nice!🤌 Question for you?...did your arms get tired using either of these?? Asking for a friend🤔😄

[@thetriggerman954]

Lmao 🤣🤣🤣 😂😂 man you crazy. These dudes need to do some curls. Build them musskuls 💪🏼💪🏼

[@dogstrucksnotherstuff]

@@thetriggerman954 I seen them pull ups at the start of the video...I suggest that to my friend...he's got weak arms....needs the lightest gun possible😄

[@thetriggerman954]

@@dogstrucksnotherstuff your friend mmm hmmm 👀

[@dogstrucksnotherstuff]

@@thetriggerman954 😄😄😄

[@WilfredGreen-ov8bh]

how is the 717 overspray

[@thetriggerman954]

It's low. Has little more than the lph400 but it's definitely on the lower end with fog compared to most guns out there.

[@Erik7prc]

I have the PRD627 1.4.......im going with that. Jus started the video playboi

[@thetriggerman954]

You out there spraying glass black panels with that sucker aye 😎

[@Erik7prc]

@thetriggerman954 that spraygun is sweet. It break that clear into nothing

[@wrightsrrt871]

Prd for me over here is my guess brother let's go!!

[@thetriggerman954]

🤔🫡

[@TheVegasbud]

Trig was out late at Da club hahahahha lol 627

[@thetriggerman954]

Need about 3 days to recover after that 🤯😂

[@Snip59]

A1 Finish Trigger keep safe keep Healthy Positive as you always are cheers till the next clip.

[@thetriggerman954]

See you in the next one my man 🤜🏼🤛🏼

[@Snip59]

@@thetriggerman954 Have a great day Trigger

[@venytaha]

PRD627 over 717 ?

[@thetriggerman954]

🥊🥊🥊 you got it, we'll have to put them to the test

[@gtturbo9342]

It is better than iwata w400 bellaria??

[@thetriggerman954]

@@gtturbo9342 not sure, I haven't used that gun in almost 20 years I forgot how it sprays. But it's almost up there with the LPH 400.

[@ryanw7950]

Bets on 627! Split nozzle technology! 3:03

[@thetriggerman954]

@@ryanw7950 lets Goooooo

[@nickcrill7718]

You remind me of blade! Hopefully you take that as a compliment.

[@thetriggerman954]

Blade the Vampire? 🤣🤣 I'm no blood sucka

[@nickcrill7718]

@@thetriggerman954 😂 the day walker! 🤣 I’ve always thought blade looked like a badass. The new blade isn’t the same.

[@3rekoatskustoms929]

Great video

[@thetriggerman954]

Thanks for the visit💪🏼👊🏼

[@bluestripes1]

2 guns 1 cup? thats crazy lmao

[@thetriggerman954]

@@bluestripes1 if you know you know 🙏🏼

[@davidray4655]

Prd for the win

[@thetriggerman954]

Cheahhh

[@billbeckett1021]

Porfis for the win!

[@thetriggerman954]

Split nozzle took the Trophy on this one for sure 😁

[@whoisrobzilla]

3:17 my money on the TRIGGA MAN edition

[@thetriggerman954]

They both were triggerman edition 😎💪🏼 thanks my man

[@Snip59]

Not cheap these guns but if you look after them will last for years more then us,I clean my Guns and strip all the time of course im a DIY Prices in Australia have gone up by 60% as they always say to us the Supplier hard to get stock because of how the world is going just more Bullshit just to put the price up all the time.

[@thetriggerman954]

Same over here. Everything is sky high 😭

[@yde.11]

Hello my friend, do you have a second account on you tube? Or someone is stilling your videos and your work. Paints by trigger is the chanel

[@thetriggerman954]

Yes that's my second channel. It's safe. Over there I do different things than I do here. So make sure to subscribe weekly videos there as well 😎💪🏼

[@MarcBchannel]

UK technology for the win🤣

[@thetriggerman954]

😯🤣 Wuhan engineering 😭

[@tripleeathletics]

Aye, My man!!!

[@thetriggerman954]

Yooooo wazzup you crazy MoFo youuu 👊🏼👊🏼

[@richardblanke5521]

Black trunks🎨💥

[@thetriggerman954]

You went for the underdog 🥊🥊

[@JuanCheeto]

Can I vote for the prd 717? 😂

[@thetriggerman954]

That was last match up lol. That gun is bad ass too though. Might have to run both split nozzles against each other

[@expertcarpainter1373]

That's glass😂😂

[@thetriggerman954]

🫡💪🏻

[@SpeakerKevin]

Dual Trigger

[@thetriggerman954]

💪🏼🔥🔥

[@arvizu619]

Split nozzle all day my vote

[@thetriggerman954]

🤔

[@michaelbell7465]

Blue.

[@thetriggerman954]

🤔

[@dollabillbrunson8107]

To be honest, I have no idea 🤷‍♂️

[@thetriggerman954]

🤨 Great Dolla Dolla Bill lol at least you watched 😎 and thank you for that. ✊🏻

[@dollabillbrunson8107]

@@thetriggerman954 I watch it all. I’m never too old to learn something new bruh!😎

[@thetriggerman954]

@@dollabillbrunson8107 4shizzle 👊🏻

[@claytonparkhurst4328]

Blue

[@thetriggerman954]

🤔

[@claytonparkhurst4328]

@@thetriggerman954 lol I called it from the start.. I just know the split nozzle tough to beat.

[@poman8772]

Split nozzle my bet....

[@thetriggerman954]

🤔

[@poman8772]

So Trig, the new 4600 looks faster than the 717 which one did a flatter clear coat ?

[@larrydurr6064]

I say the PHS 155

[@thetriggerman954]

🤔👀

[@joblo2299]

To be honest,,if a gun not better than a lph400 144lv,it aint worth buyin to me..jus sayn..❤❤

[@thetriggerman954]

If that's the case you won't be buying guns no time Soon. 😂 Because the created a monster when they made that gun 😎

[@srodgie]

Hey Trigger! Fantastic video Brother! Well, I'm a bit late to this party🤣🤣🤣🤣.... but looking at the video, for me, it would be the PRD as i favour low overspray painting, due to my conditions! Keep up the great work Sir! 😎💯🙏🙏👍

[@thetriggerman954]

Better late than never my man. Thank you for chiming in 💪🏼 low overspray will always win for me

[@executionisthil6100]

porphis

[@thetriggerman954]

Which one? 🤔

[@aldugas4801]

155

[@thetriggerman954]

🤔

[@eulicerichardson299]

Prd

[@thetriggerman954]

🤔

[@EJ1James]

We back in the states and now we back in the lab 🧪, wassup Trigga!

[@thetriggerman954]

Yo Yo Big money James what they do playa 😎👊🏼

[@EJ1James]

We getting there 💵 You know back at work spraying, tryna be like you bro!

[@thetriggerman954]

@@EJ1James you don't grind you don't eat. So you already know brother 💯

[@jeremythornton9838]

Blue

[@thetriggerman954]

🤔