Porsche 993 - Painting calipers, replacing rear brake pads, replacing wheel stud

  Рет қаралды 2,558

beardedgarage

beardedgarage

Күн бұрын

Пікірлер: 27
@johnsnowdon2939
@johnsnowdon2939 2 жыл бұрын
Nice job. I've got the big black calipers on my 92 964 Turbo and they really need an overhaul like this.. I also have two snapped bleed screws to remove that I am not looking forward to. I'm thinking it may be better with them off the car! Nice to see how good a job can be made with painting it by hand - it has made me think about tackling it myself!
@beardedgarage
@beardedgarage 2 жыл бұрын
If you’ve got broken screws, it’s probably way easier to take the calipers off the car in the long run. I’m sure the painting is easier off the car too. I’d wait until you need a brake job and a brake fluid change and do it all at once.
@93B18
@93B18 2 жыл бұрын
Are those decals the OE sizes? Are the front and rear OE stickers the same size? I noticed the rear calipers are smaller than the fronts.
@beardedgarage
@beardedgarage 2 жыл бұрын
I measured the decals on the original calipers and printed them. They probably could have been a little bit bigger, but they look pretty good on the car.
@93B18
@93B18 2 жыл бұрын
@@beardedgarage It sounds like they are the same size front and rear? How much for 6 of them shipped to 94547? Appreciate the time!
@beardedgarage
@beardedgarage 2 жыл бұрын
@@93B18 Yes, these are the same F/R. I'd be happy to print them for ya. I can't find a way to PM here to get an address, but 6 to 94547 would be $20
@93B18
@93B18 2 жыл бұрын
@@beardedgarage Awesome. I appreciate your content. Happy to grab 6 of them. Do you have an email?
@oibal60
@oibal60 2 жыл бұрын
I've a 1996 993 C2 iris blue metallic, 66,000 miles, 6-speed manny tranny, varioram. No CEL, no oil leaks (no really!). I'm never selling it!
@beardedgarage
@beardedgarage 2 жыл бұрын
I love the 993. This is my second one, and I love it! I'm a bit partial to my 95 coupe ;)
@oibal60
@oibal60 2 жыл бұрын
@@beardedgarage Good man! BTW, I also do my own maintenance.
@beardedgarage
@beardedgarage 2 жыл бұрын
@@oibal60 hell yeah. I love working on these. I have sooooo many more projects. my 95 is getting the engine out treatment this fall (it snows here for 6 months) and I'm going all out
@ocmacman
@ocmacman 2 жыл бұрын
My engine still isn't in. But where did you get the stickers? I need some for my '96 993.
@beardedgarage
@beardedgarage 2 жыл бұрын
The engine isn’t in? What’s happened? I made the stickers on my wife’s vinyl machine. Let me know if you need stickers or help on the car
@ocmacman
@ocmacman 2 жыл бұрын
@@beardedgarage Thanks B. Hot weather, had to go to Monterey for work etc. I have the engine under the car just need to push it up into the bay. I still don't have the vacuum hoses correct but I am going to go with the way I have them installed and try to start the motor. Yes I do need the front and rear stickers, I had my calipers powdercoated a year ago but no stickers. My calipers are Green like the car.
@ocmacman
@ocmacman 2 жыл бұрын
@@beardedgarage Let me know how much a set is and I'll send you some beer money.
@beardedgarage
@beardedgarage 2 жыл бұрын
@@ocmacman I'd do that. How about $10 for the set of 4?
@ocmacman
@ocmacman 2 жыл бұрын
@@beardedgarage works, let me know where to send PayPal f&f of course. Thanks. Hoping to get back under her this weekend and get her back on the ground. Our heatwave is over out here.
@PedroFTeixeira
@PedroFTeixeira 2 жыл бұрын
Does anyone know the part no for those parts that clip on the pistons?
@haroldsingh7486
@haroldsingh7486 2 жыл бұрын
I’m probably 14 years older and have a 14 year head start on my 993. I also have a beard and have done many of these projects! 😂
@beardedgarage
@beardedgarage 2 жыл бұрын
Sounds like we should grab a beer while working on cars!
@darbo23
@darbo23 8 ай бұрын
Clumsy damaging way demonstrated to compress the pistons, best to use a brake pad compressor. A compressor doesn’t damage the face of the calliper.
@beardedgarage
@beardedgarage 8 ай бұрын
To each his own. I’ve done it with pliers, screw drivers, compressor, etc. as I said in the video, I’m sanding and painting the calipers so I didn’t care about the face of the caliper.
@oibal60
@oibal60 2 жыл бұрын
FIRST!
@beardedgarage
@beardedgarage 2 жыл бұрын
Awesome!
@terrychan8958
@terrychan8958 Жыл бұрын
Your elbow blocks the view😢
@beardedgarage
@beardedgarage Жыл бұрын
sorry about that, I keep trying to make these videos better
@maxagent86
@maxagent86 Жыл бұрын
Sorry, but for the most part you used a bad camera angle. All I could see was the back of your arm. I had to stop watching at around 6 minutes. Just trying to help for your future videos.
Porsche 993 Big Red Brake DIY Part 1/3 | DIY004
10:22
911Percent
Рет қаралды 12 М.
Jaidarman TOP / Жоғары лига-2023 / Жекпе-жек 1-ТУР / 1-топ
1:30:54
24 Часа в БОУЛИНГЕ !
27:03
A4
Рет қаралды 7 МЛН
Porsche 993 Parking Brake Adjustment at BreitWerks
9:40
BreitWerks
Рет қаралды 3 М.
EVERYTHING WRONG WITH MY CHEAP PORSCHE 911 993!
26:22
Autoalex Cars
Рет қаралды 613 М.
The ULTIMATE Guide on How to Replace Drum Brakes
22:00
ChrisFix
Рет қаралды 8 МЛН
Most Common Brake Installation Mistakes!
13:29
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 4,8 МЛН
Porsche 993 - Replacing door handle gasket
11:23
beardedgarage
Рет қаралды 4,8 М.
MORE GRIP FOR YOUR PORSCHE 993 CARRERA [WAVETRAC LSD UPGRADE]
7:48
Regal Autosport
Рет қаралды 1,7 М.
Painted Calipers the EASY way Porsche Boxster Cayman
19:59
DIY Porsche Guy
Рет қаралды 4,1 М.
15 QUIRKS You Didn't Know About the Porsche 911 (993)
9:01
Corner Balanced
Рет қаралды 24 М.
Jaidarman TOP / Жоғары лига-2023 / Жекпе-жек 1-ТУР / 1-топ
1:30:54