Portable Bluetooth Speaker Build (Using 3D Printed Parts)

[@RandomAudioGuys]

I just found your channel Donny, and you did an amazing job of crafting something that looks retail, I love your use of the 3d printer. You made jigs with it that helped finalized a professional look, I was worried that it would be a overuse of 3d printing when I saw the title, but you integrated the 3d printer in a way that it should be used, we all know the look of 3d printed parts is not a finish that gives a production part look. The ports were masked in the back allowing them to do their job without showing up to the eye. You may want to consider giving the front ports that show an acetone bath, It helps give a production look to 3d printed parts and would only need done to the piece that shows to the eye. But I wanted to say, you did an amazing job , and I am about to use a set of Focal Slate series speakers for a similar product and kudos for doing an awesome job in inspiring many others.

[@ford1546]

apart from the complaints I wrote in my comments, this is an incredibly well built speaker!

[@Z_YasTreb_V]

Просто нет слов шикарное изделия молодец.

[@minopausa]

35 min of video to build, in 2024, a bluetooth speaker! Fantastic and Remember: don't care about the people' time because it is shit. Your time and your money are the only important things! ❤

[@fischflossn]

wtf bro? nobody forces you to watch it? if I would make a 60min video even of just my fucking cat its not your problem

[@ammy4551]

It looks very simple but there is lots of work behind this

[@DonnyTerek]

All the hard work is on the inside 😄

[@AdityasMedia]

Excellent!!! Professional. Box is absolutely gorgeous. Looks great and sounds even better. I love it. Wish I could have it. 👏👏👏👏

[@DonnyTerek]

Thank you so much! Kindly appreciated.

[@ЕвгенийЕрин-ш2щ]

По сравнению с другими,эта колонка сделана качественно,жму руку мастеру,попробовать сделать что-то подобное но уже с флешкой и радио,я думаю получилось бы тоже супер,звучание динамиков бомба

[@volodik33]

Три элемента 18650 на усилок c TPA3116 для раскачки 8-ми омных 40-ваток, это не серьёзно). В остальном отличная системка!

[@chickencurry7642]

That power switch/battery indicator is cool

[@dsprox]

You are build a premium quality nice❤

[@jernejfunkl8300]

Very professional construction :)

[@DonnyTerek]

Thank you!

[@mukeshpatorkar6645]

Bhai aap ka wayring karna and samjhana bahot badiya hai samnewala aasani se shikh Sakta hai.dhannyawad.

[@Connorplayer123]

How do you make something DIY look that good?

[@shawndeclan3033]

17:04 i somehow felt so satisfied of how detail and everything fits perfectly👌🏻😄

[@DonnyTerek]

Did a few test fits before to get the correct dimensions of the panel and it fit pretty well as you can see 😄

[@russgladstone432]

Very nice, I bet it sounds better placed against a wall, or even better in a corner, smart clean look too, great job

[@TCTalhaOzturk]

congratulations on a successful job

[@DonnyTerek]

Thank you!

[@natomale]

Hi Donny, how did you calculate your needed power? Your battery pack is 3* 3.7v 3.4ah - Your amplifier can receive 12-24v and can give 2*100w - Your speakers can receive 40w

[@DonnyTerek]

Hi! The actual power output on the amplifier is more like 2*25W if not less. The battery pack is roughly 35 Wh of capacity so it is suitable for the power needs of this amplifier.

[@JBKING9917]

Bro you should add a grill infront of speaker that would be awesome

[@suhan079]

Does the separation of two channel enclosure makes it sound better?

[@YKGdiy]

Yes it does. I don't know how to really explain it, but basically because the channels plays different sound they will distort when there is no seperation.

[@NIGHTDREADED]

Isnt mdf dust like really really bad for you? I hope you had proper ventilation throughout the entire video. Nice build!

[@camilohidalgo5301]

Tiene un acabado muy profesional, me encanta que tenga tanto detalle, eso es lo que cuenta al final. Me gusto mucho 👍😄

[@iwanarsy5213]

Saya suka dengan hasil karya mr Donny sayang di indonesia gak ada karya yang bagus❤❤ mr Donny

[@shahin5042]

nice bro but why dont use rgb led in your box???

[@onairtamiloli4151]

Excellent job!!👌👍

[@saeidmousavi7380]

So much beautiful and like 👌👌👌👌👌👍👍👍👍👍👍♥️♥️

[@ChibiChula]

Wow... Gorgeous look, sturdy build and high quality sound. Perfect! 😍👍

[@DonnyTerek]

Much appreciated, thanks!

[@tushardevera9905]

Wow fully premium,🙂👌👍

[@RixtronixLAB]

Nice video shot, thanks for sharing, keep it up :)

[@DonnyTerek]

Thanks for watching!

[@bestclips-movies]

Where is amplifier?

[@thedivyanshupandya]

Hello Sir, I Am From India🇮🇳 And I Loved Your Videos So Much. In My Childhood I Have Intrest On Speakers And Woofers, I am Your Very Old Subscriber, Can You Sell Me This Speaker

[@ivanalfonsocorderogutierre7498]

Beautiful!❤🎉

[@fiat600club]

Los croosover una lastima que no los hayas hecho en una plaqueta de circuito impreso. Y comprar una soldadora de punto para soldar las baterias, se ve que te sobra el dinero, más cara que comprar un parlante ya hecho

[@ricardoandres1427]

Hola. Consulta: dónde compras el kit de altavoces? Por lo que he visto en tus videos, me quiero animar a fabricar uno. También soy amante de los parlantes y los colecciono. Excelente trabajo y muy prolijo. Te sigo desde ahora en KZbin. Saludos desde Chile.

[@DonnyTerek]

Hi! Had to translate your text. You can check the description for links to the parts.

[@志明高-r5z]

厲害 自己動手做真的很有成就感❤❤❤❤

[@niponphanfak6090]

สุดยอดอยู่ครับ ถูกใจเครื่องมือที่ครบครันครับ ทำให้งานออกมาเนียนครับ😊

[@DonnyTerek]

Thank you!

[@CreativeObor]

Very good❤❤❤

[@ВадимФёдоров-к8щ]

Super good 😍🥰🔥👍👍👍

[@ilovethynos]

please make video on 2 way jbl 424fhi 4inch speaker, with bass radiator, im confused if i can add passive radiator to it or not because it does not have dustcap

[@shakibul83]

Nice but Tools cost more 😊

[@deymonster2u]

Does it need to additionally adjust schema?

[@youtubetrend7833]

good job

[@UpinkProduction]

I love it good 👍

[@asgameryt8049]

gret man very nice bro

[@shabbirahmed4733]

Awesome 👍

[@DonnyTerek]

Thanks!

[@CedricFlavien-bd8vc]

Full range,. Type bose sound,. Great

[@ErMakesEverything6734]

Amazing🥰🥰

[@alankiedrowski54]

Hey man when are you releasing the next part of the Engwe conversion project?

[@vuqarveliyev1252]

Супер. А как понять фильтр для одного динамика?

[@MadanJit-pt7vt]

Sir je kitne ka milega total kitna kharcha aya tyaar karne mein

[@lucianogiraldi7048]

Great Job!!! Which spray glue have you used for leather?

[@DonnyTerek]

Thank you! I use spray contact adhesive that you can get at most hardware stores.

[@fidelnavarro6746]

Yo quiero uno que igual tenga control de graves, agudos y que sea de perillas.

[@tyriedle2658]

You rock guy

[@Eisenkarl]

Why the Basstubes ? 2.little Speaker in a "large enough" Case. And why 2?

[@DonnyTerek]

Ported enclosure for extended low frequency range, two speakers for stereo.

[@michael211212]

Inspiring work

[@DonnyTerek]

Kindly appreciated.

[@godfellas483]

I just wonder why so much care was spent to seal things up (to prevent air leaks) when there are ports in the cabinet? Glue, gaskets, etc...? Nice project though...

[@DonnyTerek]

Hi, the drivers move quite a lot of air at higher volume, so any leaks might create whistling noise.

[@user-ow6hm1hi8s]

Someone : What's the Price? Me : Priceless ❤

[@sdoksdomdiy99]

Hello brother video very nice

[@DonnyTerek]

Hey, thank you!

[@sdoksdomdiy99]

@@DonnyTerek Yes sir, Thanks

[@rodolfomoralez8617]

A question : what kind of speaker was used?

[@pixelreflectorpro]

dayton audio cx120-8

[@DonnyTerek]

Parts links in the description.

[@mithleshsingh2102]

Please tell me the name of your amplifier board please 🙏🙏🙏🙏

[@DonnyTerek]

Hi, it is a TPA3116 stereo amp, you can check the link in the description.

[@mistrilearning]

#verry nice work

[@adityaSharma-ur7fd]

Details 💯💯💯

[@АнатолийКапанёф-ц3б]

так нечо супер но посеридине надо было ещо паручку малиньких высока чистные делать и былоб самое то...да подсведку ...а так все супер

[@facebythewind]

whats the use of crossover?

[@DonnyTerek]

The CX120 speakers have the tweeter inside (in the center) so they need a crossover.

[@Alisupandi-d4p]

Ok.very good

[@kessio7]

Perfect!

[@DonnyTerek]

Thank you!

[@EnderRios]

jejejeje y para qué hizo el crossover ????

[@DwiantorroOfficial]

Amazing👍

[@AiCat0897]

Price ?

[@josephesposito3499]

Where can I buy the drivers? I need 3.5"

[@AliShaer-l4w]

ما هو اسم الماكنه اريد ان اشتري نفسها

[@PeterNetped]

[@KKO168]

Nice

[@Tinkugalima9]

Very nice sir please give me one piece India

[@priyaherath]

Can't we have passive radiators?

[@DonnyTerek]

You can, but for this build I went with ported.

[@maheshwark9189]

Design like marshal speaker but logo missing

[@YNUS1]

Динамики хорошие.

[@omerfarukzz]

How many hours can it work with one charge? I am also planning to build with 8s 26650.

[@DonnyTerek]

Approx. 8-12 hours, which is pretty good actually.

[@omerfarukzz]

@@DonnyTerek thanks for the answer but i changed my mind. Will build with 4s2p i think

[@DonnyTerek]

@@omerfarukzz Good choice, should have plenty of battery life.

[@daerilys]

Buld a Time Machine

[@АлексейКелеш-я3э]

Ты в Литве живешь?

[@vishalgouda8130]

Box size pls😊

[@Rang_Chaniago88]

berapa harga yang sudah jadi pak,yang seperti ini ?

[@abyanfirmansyah1714]

nex time request song DANGDUT KOPLO

[@dktechmarathi5453]

How much total cost bro 💲

[@DonnyTerek]

You can check the parts price in the description.

[@Riley4R]

perfect

[@duh1027]

Essa ficou foda

[@ghcggggjvg339]

Hi

[@TheChrisplayer94]

wow just wow This looks better than any industrially manufactured Speaker! Hope it sounds as good as it looks! maybe a little dsp next time? cheers

[@DonnyTerek]

Thank you! Had an idea of using dsp for a speaker build, might do it on my next build!

[@thedivyanshupandya]

I Know Your Struggle In Making Of This Speaker And Your Hard Work, I Know That Your Machine Are Very Costly But Sir Please Can You Give Me This Beautiful Product♥️♥️♥️♥️

[@Danielddiniz]

You’re so greatly talented, man, congratulations 🏆

[@wattspeakers]

Wow! Incredible build, so much attention to detail and the craftsmanship was meticulous. Your camera work and video editing are... Well to say incredible would be an understatement. The sound sampling was top shelf, the sound was excellent. But the part I liked the most, was the ported, powered portable speaker system that sounded impressive. Gorgeous work of art, with that embossed handle. Amazing. Really really good job all the way around.

[@DonnyTerek]

Thank you so much! Can't express how much this means to me.

[@RajRaj-ye1vj]

​😅

[@rastailor256]

​@@RajRaj-ye1vj❤aaqààa🎉à

[@MateenLoevolgs]

⁹😮​@@DonnyTerek

[@basukisugito8929]

Why do all make bluetooth speakers in mono?

[@Uwa-ru4xr]

Nice video, I m planning on building one. How do charge the battery and use the boombox at this same time.

[@Vinodranganathan]

I would gladly buy it. It:'s the best compliment that I can give for such a meticulous build.

[@DonnyTerek]

Kindly appreciated.

[@blindinglight332]

Beautiful work! I love the minimalist and clean look :) I just want to ask where did you get the thin sheets of wood from?

[@DonnyTerek]

Thank you! If you are referring to the wood veneer, I got it from my local wood supplier.

[@sus_aman]

Only 99,00,000.00 sir

[@crisfher]

10 volt it's not enough plis change those batteries 🙏🏼

[@DonnyTerek]

Those are not fully charged, once full they are 12.6V total.

[@CodyHovland]

That's awesome, I love the attention to detail! How loud is it? Did you test the decibels? It seems that the "22uF 100V Electrolytic Non-Polarized Crossover Capacitor" and " Dayton Audio CX120-8 coaxial driver" are sold out. Do you have any recommendations for replacements?

[@DonnyTerek]

Thank you! Sorry for the late reply, but it seems both are back in stock now.

[@Excalibur-Hells]

Qualidade do som não é muito bom! O projeto Ficou bom! Os meus eu faço a Mão 🫱😮

[@SRCreations308]

1st view and like

[@ford1546]

You must not have the bass port so close to a wall either! There is a rule that says how close to the wall you can have a it. And your pipes are a little too close to the wall! It has something with air that is held back and does not go out and in freely. And air noise.

[@sylvalineresources9540]

During the WWE commercial you will be told "NEVER TRY THIS AT HOME". Yes! I'll never try this at all. It's never a DIY. It's a professional job. From the beginning to the end everything is highly professional. I'm so sure that even if you do all the wood work, the 3D printing, and getting all the parts for me, I will still not be able to do it. You are really good.

[@DonnyTerek]

Thank you. It is doable, but not for everyone for sure.