Retrofit Auto Hold Audi A4 B9

[@Nick-km2fn]

Just finished this retrofit with your help. Now the car has everything I need. The hardest part was getting all the panels off and opening the connectors to remove and add the pins. I bought a button and cable via Ali, so the mod is connected perfectly and can be removed any time without damage to the original cables. Thanks for the clear video and instructions you website.

[@matteo_micarelli]

Auto Hold installed correctly! I confirm that the active PIN "under key" is PIN 5. Thanks a lot

[@MunteanuBogdan91]

I'm glad you did it! Don't forget to Like & Subscribe :D

[@matteo_micarelli]

While the errors are cleared, a fixed error remains in the control unit 19 (Gateway). Every time I go to the control unit item it gives me the possibility to do an automatic coding. Should I do it? I have a photo of the error, where can I send it to you? Thanks

[@MunteanuBogdan91]

@@matteo_micarelli I don' recommend any automatic coding!! You don't know what it codes and you can have big problems after that.

[@blackychannel1]

Hello Matteo, hello Bogdan, can you help me to find the active PIN „under key“ for the auto dimming interior mirror? Does anything have to be done with the fuses? Thanks a lot!! :)

[@matteo_micarelli]

@@blackychannel1 I apologize, at the moment you find me unprepared for this. Bogdan will surely know more!

[@savouryfriend]

This is fantastic, will be doing this soon on mine. Thanks for the video!

[@TheCarambaTB]

Thank you very much, just successfully installed and coded the button. Everything works great and no faults.

[@MunteanuBogdan91]

Glad to hear that!

[@covakoma1064]

​@@MunteanuBogdan91i dont get it wasnt this auto hold on the pedal? When you stop in hill pedal press and it turn on auto hold so when you press gas it goes again ??? I dont get it ?

[@mihmdmustafa6208]

Sir I would like to install this in my car. but i need your help. could you help me? Can I have your whatsapp number?

[@TheMadger94]

Thanks for the video. Will try to install it next month. I have bought a wire kit from Ali. So hopefully everything will go well.

[@TheMadger94]

Just finished retrofit of steering wheel and steering stalk actually. So I can have lane assist working now with Button to switch it on and off and heated steering wheel . So I think this one will be easier, I hope

[@stephansantens9953]

Thanks a lot for this perfect install video. Will be doing same thing soon.

[@MunteanuBogdan91]

Thank you for your donation Stephan!

[@teddycristian2779]

wow nici nu ma gandeam ca e posibil sa ii faci retrofit, super

[@alcalin12902]

Super! Ar fi misto de vazut si un retrofit la Ambient Lighting

[@MunteanuBogdan91]

Am ambient light și nu o să fac acest retrofit din păcate.

[@Shockate]

@@MunteanuBogdan91 poți face la mine 😁 eu am luminile albe

[@specterSAN]

Good work, te urmaresc cu placere cand vine vorba de audi stuff. keep going!

[@MunteanuBogdan91]

Mulțumesc!

[@Joseluis-vs7dv]

FANTASTIC VIDEO👍👍

[@MunteanuBogdan91]

Thank you very much!

[@georgealex19]

Great tutorial! Thanks!! 👍

[@hamzachafable]

Very nice work Is it the same procedure for Audi A3 8V?

[@automobilieuropeltd4087]

Excellent work !

[@MunteanuBogdan91]

Thank you!

[@daveross4091]

fabulous im about to do this on my s4.when i get harness from ali,which side is the bcm on right hand drive models?

[@agustinpasqualini3973]

Hello! Excellent video! Need help. How do I know wich is pin 5 and 6 in the brake conector? Thank you!

[@nardo4497]

Bună, v-ați gândit vreodată să înlocuiți un aparat de aer condiționat analog cu unul digital. Ar fi un videoclip foarte interesant.

[@pavlezt]

Very good video, Thanks. Question: how AutoHold now with start/stop - in my car engine is turned on after I release brake pedal, while Auto hold is switched on and car stays still. Secondly, does your bulb in Parking Brake button works well? In my car this button works well, but there is no light for it.

[@airforcebg]

There is no need to remove the OBD and other stuff from the panel. There is plenty of room. I've spliced the A32 near the plug as the kufatec manual says. It works good now.

[@MunteanuBogdan91]

I didn’t have kufatec instructions but it was easy to remove those parts. I’m Glad you did it!

[@airforcebg]

@@MunteanuBogdan91 your help was awesome as well because they had wrong instructions regarding the sockets so with the combined knowledge I did it. Thank you!

[@xBigozx]

great video and instructions - i cant get the button to work..it illuminates when i turn the lights on, but the hold function isnt working. and the red light doesnt illuminate on the button. i think i must have some wiring wrong.

[@furkan1391]

Thanks for the video and instructions on your website. I have installed the autohold and code it. Is it correct that if you put in reverse that the autohold will be off?

[@loralexa2003]

fa si retrofit la lumina ambientala

[@proluxify]

Salut. Faci cumva astfel de lucruri (contra cost, normal) pentru posesori de Audi din Galati ?

[@MunteanuBogdan91]

Salut. Din pacate nu. Nu-mi permite timpul.

[@DorentinMaloku]

The red wire, will it end up hidden somewhere under the wheel or it will be on the open accessible from legs, that part i could not understand.

[@sdn9002]

Do these codings work for A6 C8?

[@wojtekbmv]

Did you already verify the POSSITIVE pin? Shall it be on PIN4 or 5 on the parking break button?

[@adrian2b]

Multumim pt video - si eu vreau sa adaug optiune auto hold :) Ai cumva ceva info sau vreun link cum pot face un retrofit de ADS ? Caut pe net si numai povesti ... Nu gasesc nimic concret....

[@MunteanuBogdan91]

Salut. Scz de raspunsul intarziat. Nu se poate face decat cu activation key la Audi. Momentan..

[@adrian2b]

@@MunteanuBogdan91 mersi de raspuns . Am fost la Audi dat mi-au dat un pret de 1400 ron cu tot cu butoane(eu avand butoanele deja) si am intrebat daca nu se poate doar activarea si ei au zis nu....

[@Pyroxea]

Frate tu le ai bv , si ce parere ai de Audi a4 2016 150 cp ?

[@MunteanuBogdan91]

Mersi! Pai de 150CP am eu și e super. Când e mașina plină și vreau să fac o depășire rapidă parcă îmi pare rău că nu e de 190CP, dar dau repede din padele și îmi trece supărarea :)) Oricum, se poate face Stage 1 din soft.

[@Pyroxea]

@@MunteanuBogdan91 Multumesc , si nu afectează motorul ?

[@k1bartkowiak]

Hi Bogdan, i have vcds 21.3 and under modul 3 i am not able to adapt bits as you could, any tips ?

[@claudiualexandrutanasa878]

Salut,felicitări pt video...chiar ai avut ceva de lucru!Te rog spune mi si mie ce vcds folosești pt masina...am si eu unul dar nu imi recunoaște masina(cred ca e prea vechi).Merci...si la cat mai multe video!

[@MunteanuBogdan91]

In video am folosit VCDS 17.1. Mai folosesc 18.9 și 19.6, dar toate sunt cam la fel pt A4 B9. Din pacate nu ai long coding helper, după cum se vede și in video.

[@claudiualexandrutanasa878]

@@MunteanuBogdan91 ai idee...se poate pune climatronic pe masina?si eu am exact ca tine...m am tot uitat pe net dar nu am vazut nimic...cred totusi ca este imposibil!

[@smzj]

I lost all the metal Clips for the center console. 😅 do you have the part number? I want to buy 6 new ones.

[@stefansk8]

salut, merge si pt butonul de drive select?

[@Ezramix]

salut, stii cumva daca imi trebuie un tester special pentru a schimba placutele de frana ? am presa de tip veche pt masini de generatia mai veche, vreau sa stiu daca pot sa fac cu presa aceea sau o sa mi trebuiasca un tester anume? ca am inteles ca din calculator se retrag electric pistonasele de la etrier. asterpt raspuns, mersi

[@MunteanuBogdan91]

Îți trebuie diagnoza pentru retragerea pistonaselor pe spate. Merge cu orice diagnoza mai respectabila. Inclusiv vcds, obdeleven, etc

[@Shockate]

@@MunteanuBogdan91 Cu Carly merge? Il recomanzi? Am văzut ca e acum o promoție la el cu 20%

[@MunteanuBogdan91]

@@Shockate Nu cunosc.

[@florinrus9651]

Salut, m ai putea ajuta cu montajul pe un a5 2018?

[@TheMadger94]

Bogdan I've read on your website that you run into problem that light of button is always on. Have you sort that problem? Also on one forum I've read That there is some binar number needs to be changed? Or is it only codes you mentioned? Thanks

[@MunteanuBogdan91]

What binar number? I think the + wire is connected to another pin. And that’s why. Check my article in the description, I wrote about it.

[@TheMadger94]

@@MunteanuBogdan91 I was reading somewhere else. It was module 3, someone was struggling to see all bytes properly. So I think it is irrelevant now. Thanks for your reply!

[@paralelmind]

din punctul tau de vedere a meritat retrofitul? eu nu am avut pana acuma masini cu autohold, nu am ajuns la punctul "o data ce l-ai avut, nu vrei sa nu-l mai ai"

[@Asdeer101]

It's only $20 plus your time

[@МПашковский]

Which music track is it?

[@Shockate]

Salut Bogdan! Ma poți ajuta cu montare butonului?

[@shaneyg1988]

Would this be the same for a Fy Q5? 2017

[@MunteanuBogdan91]

Yes

[@matejpetras2016]

What kind of male pins are used for those connectors? thanks

[@MunteanuBogdan91]

Check them by code: 000979009 EA

[@Karxas]

Would you mind sharing name of the song? Thanks!

[@typhouse]

Salut, nu am demontat inca masina, dar imi poti spune te rog firul pe care il conectezi la cele doua terminale A si B, pe unde iese din consola centrala? Sau este ascuns sub panou (zona de cand scoti mufa de OBD etc)?

[@MunteanuBogdan91]

Ascuns pe sub panou. O să-ți dai seama pe unde sa-l tragi când ai totul demontat

[@typhouse]

@@MunteanuBogdan91 ok, merci! Curios, ai avut ceva probleme cu el/de la el de cand l ai montat acum cateva luni? Asta crezand ca nu ti ai schimbat masina de atunci :D

[@MunteanuBogdan91]

@@typhouse Nu am vandut masina și nu, nu am avut nicio problema. E cea mai buna și ieftina investitie facuta :)

[@constantinvaleriu5019]

Si poti ajuta , contra cost si pe alti posesori de a4 b9 , fara autohold ??

[@MunteanuBogdan91]

Din pacate nu prea îmi permite timpul..dar ai toate indicatiile in video și in articol. it's easy

[@bobo14428]

Salut Bogdan, ai idee cum pot scoate modulul de usb de sub cotiera? Nu am gasit pe net un ghid pentru demontarea consolei complet si doresc sa imi fac retrofit la android auto. Cumva trebuie scos spatiul de depozitare din spatele cotierei apoi o sa fie accesibil?

[@MunteanuBogdan91]

Sincer nu am desfăcut și nu aș putea să te îndrum. Eu am Carplay din fabrică și nu m-am documentat în direcția asta, nici cum se demontează nici cum se codează :) Poți întreba pe grup, pe facebook. Sigur te ajută băieții care au făcut asta deja: facebook.com/groups/237283381226339

[@gabrielthecolorblindsoul6994]

Salut! Stii cumva daca iti trebuie programare sa schimbi ceasurile de bord clasice cu virtual cockpit? Sau e doar "plug and play"?

[@MunteanuBogdan91]

Trebuiesc programate plus cablu de semnal special pt navigatie. Nu e chiar simplu, dar se poate face. Am vazut pe cineva care a facut.

[@gabrielthecolorblindsoul6994]

@@MunteanuBogdan91 Am înțeles, mersi mult! 👍

[@TheNopsen]

How long must the wire be?

[@traianraduastelean8016]

Felicitari!! Bun video vroiam sa te intreb de unde ai luat butonul si cat te-a costat? Eu l-am luat de pe un site din Germania k-Electronic si imi trimite ceva manual de instalare doar ca in gemana! 🤦‍♂️

[@MunteanuBogdan91]

Salut, găsești detalii în articol: munteanubogdan.com/auto/retrofit-auto-hold-audi-a4-b9/

[@deepradu]

Salutare . Am o intrebare , trebuie sa am vreun cod anume ca sa imi suporte pompa abs acest retrofit ? am vrut sa montez la cineva in Bacau si mi-a zis ca masina mea nu suporta , este adevarat ?

[@MunteanuBogdan91]

mergi la altcineva. toate suporta.

[@vasilicastan6155]

Salut am și eu o întrebare cum să fac să leg boxele la Audi A4 b5 spate

[@anessabanovic9753]

Which software do you have of vcds. My software with 21.3.0 does not work?

[@MunteanuBogdan91]

I’m using OBD11 now. In the past I used VCDS 17.3 and 19.6

[@anessabanovic9753]

@@MunteanuBogdan91 with the hex-v2 ?

[@TheFoxfy]

Electric brake fault after programming and key does not seem to work

[@moak471]

it is possible to do the coding with Obd11?

[@MunteanuBogdan91]

yes

[@moak471]

@@MunteanuBogdan91 okay thank you. can this be built into every A4 B9? or is there any equipment that must be installed as a prerequisite?

[@MunteanuBogdan91]

@@moak471 Can be installed in any A4 B9.

[@canakaltun]

İs it possible to activate without installing a button?

[@MunteanuBogdan91]

No

[@r-Junr]

I'm grateful for the fantastic video. If it is possible, could you please provide me the OBD 11 coding? I appreciate your time and assistance.

[@ronaldsanchez2506]

have you experienced any issues related to this retrofit?

[@MunteanuBogdan91]

Nope, all good after 4 years

[@aleksandrivannikov9771]

Очень много работы, сам не разберусь😟

[@georgealex19]

All this for a 92€ optional… ro: e 92€ optiunea de auto-hold…. 🤦‍♂️

[@patrykmilo715]

Komu ta chamska muzyka potrzebna !!!

[@lupuradu841]

Of,nimic nu e in standard la audi,nici macar auto-hold🤣🤣

[@mihmdmustafa6208]

Sir I would like to install this in my car. but i need your help. could you help me? Can I have your whatsapp number?