Connect CCTV camera to DVR using video baluns and UTP cable

[@PoseidwnTech]

New video for CCTV Cameras using Video Baluns : kzbin.info/www/bejne/fafLqJ-laLZ8mJI

[@MudassirKhan-e1b]

Děda❤ee3wr2vv.

[@bassalh2025]

Bad idea bro, for video signal you must use coaxial cable for better video quality especially if you run long cable

[@PoseidwnTech]

I agree, but with a UTP cable can support analog cameras with video baluns and IP cameras.

[@pierpa_76pierpaolo]

I need something like this to record but I have 5.8 ghz wireless cameras. It is NOT as professional as this but for the time being it is fine.

[@ff7516]

Hi, your video is very useful, thanks... I have a question: How far could the utp cable power 2 cameras without voltage loss ?

[@PoseidwnTech]

In some of our installations we used up to 80 meters cable without any problem, but for longer distances we give power to the cameras locally. For example we installed cameras in a house and the customer wanted to add also 2 cameras in a storage room. The distance between the storage room and the DVR (house) were more than 100 meters. So we used 1 utp cable for the video signal but we installed a DC Power Supply (with battery backup) inside the storage room in order to give power to the 2 cameras.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@nikolaleko975]

Za kameru ide od 12 v sa 2 konektora adapter mora imat 5 ampera sa 2 konektora na resiver i cameru

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@SAEED2HK]

Cat 6 cable not designed for analog camera care-full DC + - and stripes better keep in middle of wire so its will not move down incase if some one pulled hardly

[@PoseidwnTech]

For that reason we are using cable ties in the video balun and the power plug.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@valuechain4710]

I love your tools , lol Where did you buy those cable clipper tools and video was clearly explained

[@PoseidwnTech]

😁

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@GreekCypriotSoul]

Φίλε πως να βγάλω έξω από το σπίτι POE καλώδιο; Έχω βρει σούστα ηλεκτρολόγου, έχω και το cctv system και δεν ξέρω πως να περάσω από εσωτερικά του σπιτιού προς τα έξω τα poe καλώδια των καμερών.

[@PoseidwnTech]

Χρειάζεται να περάσεις UTP καλώδιο αλλά θα ήταν καλύτερα να πάρεις τη γνώμη ενός ηλεκτρολόγου.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@Megabrainsr]

Thank you so much, this is the only video that shows it correctly.

[@PoseidwnTech]

Thank you for your feedback! I also made this video: kzbin.info/www/bejne/fafLqJ-laLZ8mJI featuring a different type of video baluns. It would be awesome if you could take the time to watch it and send me your feedback!

[@glaura1581]

maybe elecbee connectors as well as other connectors. i think it's really helpful for me and i will recommend this video to my friends.thanks!

[@PoseidwnTech]

Thank you for your comment!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@xXFOYXxQ8]

Sir, I have a question, can you pair 2 cameras with 1 Ethernet cable, since there are 4 pairs?

[@MP-oh9lt]

You can but sometimes there can be problems with signal mirroring. I have connected up to 3 cams over one utp cable but this is not advisable.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@algigirl]

Thank you for the video. I have cat six and balun. Going to install CCTV ..less than. Hundred metre.

[@PoseidwnTech]

Great 👍

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@eljahvyoncasley2176]

J CONSTITUTION I HAVE 4-ANALOG CAMERA AND 3- IP CAMERA TRYING TO PUT THEM TOGETHER WHAT CABLE , I NEED DO I NEED DVR,OR NVR

[@PoseidwnTech]

You will need a DVR that supports also IP Cameras.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@mohsinabbass]

Dear sir, i need to confirm Safevant DVR can work any type of Analog camera .Please explain which type of analog camera can work of this Safevant dvr .

[@PoseidwnTech]

I am sorry but I am not familiar with Safevant DVR.

[@natedogg8051]

Please suggest to use seperate power cable when using CAT 5/6 UTP cable. Since these cameras are analog it will cause interference.

[@PoseidwnTech]

You are right! Thank you for your feedback!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@johnlarge7069]

Yes it's ok doing all of that but was a proof of it working you have shored us if it works or not how does we know that it works or not it could not work you just sort of the video when you are putting it together but you haven't sorted us on video on your monitor or TV does it work or not it's ok for you to just do all of this but end of the day in men at work now that doesn't the point the video doesn't prove the point too good I am not satisfied and plenty will not be certified as well

[@PoseidwnTech]

You are right! That's why i made this more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@e-lockscarkeysprogrammingt770]

Αν χρησιμοποιήσω BNC connector με τα βιδακια αντι για Balun δεν θα δουλεψει; τι προσφερει παραπανω το Balun?

[@PoseidwnTech]

Αν μπορείς δες το τελευταίο και πιο αναλυτικό video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@goodlife2999]

Thank you so much sir

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@annaparas]

Where I get this video baluns.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@jjjoshi4369]

Pl. Direct conection in tv av pot not use dvr only watch live in door camera. Not recording hard disk pl. Sent a vedio .urgent reply please. Thankyou

[@PoseidwnTech]

Can you please explain in more details because i don't understand?

[@jjjoshi4369]

Muza 1 camera door pe lagana he lekin direct tv Me vdo dekhna he only live no recording no dvr only door pe kon he ye dekhma he TV me A V mod karke dekhsakte he?

[@jjjoshi4369]

Instol on door no recording no dvr only live in tv use as audio vedio pinurgent reply

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@vangieskitchenomicvlog4827]

thank you for sharing ypur idea how to connect cctv to dvr

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@tuahstudio9107]

How about pricing installation cost between rg59 and cat5e..?

[@PoseidwnTech]

I believe that ump cable is cheaper!

[@tetraederzufrequenz7896]

@@PoseidwnTech how can we protect our devices against Jammers?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@fruitieplayys9125]

you should also use two pairs for the video when using longer distances

[@matias3523]

Hello, how many meters can I make with this method? I need to put 2 cameras... the 1st at 50 meters and the 2nd at 70 meters from the dvr. Can I use the same cable?

[@PoseidwnTech]

Yes you can, but it depends of the video baluns. Please watch this tutorial for more info : kzbin.info/www/bejne/fafLqJ-laLZ8mJI

[@matias3523]

@@PoseidwnTech nice, thank you

[@luciano_romano]

How could I use a V+ and V- pair coming in (ie. as the input), and translate it to a more 'user friendly' output (like HDMI)? Can I use the balun to have the signal run the other way, and then plug the coaxial into a converter? Thanks :)

[@LouisGFranco]

But what if want to use a ptz camera with a power over Ethernet female connector to use on my DVR with BNC and wire it to to DVR ptz controls?

[@PoseidwnTech]

The UTP cable has 8 wires that are enough for connecting a PTZ Camera.

[@LouisGFranco]

@@PoseidwnTech would you happen to know the color code wiring for which cables on the Ethernet cable are video for the BNC (video), power to the camera, and the + and - that go on the little green adapter to control the ptz functions so that I may connect them to my DVR or do they vary from camera to camera and Ethernet cable to Ethernet cable? If so do you have link to diagrams of which "pins" on the 8 "pin" Ethernet connector are for what function?

[@MuhammadKhalid-t5z]

Hi Respactabile Sir How much cable use this baluns please give me a answer Thanks a lot,s Respactabile Sir very nice Guide.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@SuperChaChaGuy]

I often wondered how UTP long runs don't lose voltage since the wire guage on utp is so thin. The doubling up of a PAIR to each pole of the power feel is a great idea i think. Minimizes the line loss due to thin wire.

[@PoseidwnTech]

That's right! Thank you for your comment!

[@haydnthomasfilmscorporate1553]

Is there a specific reason why you only double up power and not video?

[@littleturtlepizza]

@@haydnthomasfilmscorporate1553 because the voltage on video line is lower but yes, you can double the video if you consider it as long as you still have another pair of wires unconnected

[@taterbell9507]

Because the camera's do not pull a big load (amperage). Electrical load is the cause of voltage drop. A wire can be run for miles and if nothing is connected to it you'll have the same voltage at both ends. If you start connecting items to it at the end of the wire you will eventually see voltage drop.

[@conktr]

@@PoseidwnTech επίσης το utp μόνο κόβεται και σου σπάει τα νεύρα.

[@MegaBankjob]

Two pairs are always better than one. CCTV with two pairs in the balun gives a certain amount of redundancy in case one pair breaks. This is especially relative and important when installs are carried out in this configuration in cold countries. If installation takes place in very cold conditions, one pair can break very easily as Cat cable becomes extremely 'brittle' in the cold. Also freezing temperatures can lead to a break in the Cat cable inside any enclosure that the connections are housed in outdoors if there is any significant tension on the cable due to a tight fit. In both cases two pairs are far better than one. As using one is just laziness by the installer to be honest!

[@nanocube]

"It is critically important that you DO NOT double up on the pairs going into the baluns. Ehternet cable is UTP cable with specific twists in the cable, having two pairs can cause interference and video loss, especially on longer runs. You must only use one pair, not two." ... from kzbin.info/www/bejne/fKTReGBuitqci5Y

[@franciscocorrales2400]

Exactly, i normally use all pair to connect dc and video to keep better redundancy and never had an issue in resolution or voltage

[@isaganibulanon7434]

Bcxw, and I cb m dz I jiovj

[@gemechuayele]

​

[@orangeduc3129]

Good job please why do I have lines in front of the camera video like interfering after using this balun setup

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@orangeduc3129]

How do I power 8 cameras should I buy 12v power adapter for each of the camera as you did meaning & power adapters

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@HDYTube]

Best video i need this titorial wooow

[@PoseidwnTech]

Thank you! Please check also this one, about video baluns : kzbin.info/www/bejne/fafLqJ-laLZ8mJI

[@valentinbordea]

Can I use this method with any camera? or does it need PoE suport(or something like this)??

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@lifeisgood5100]

i have the same camera, how can i turn it into a network camera with wifi??? τηανκσ α λοτ

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@Akeso_ppp]

0:04 u got 2 cables out , i got 4more clewn without protection 😮 what to do??? how to connect all these???

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@kabapkazserem_]

I have a question my camera working but now i have information no video i cut little bit cable but still not working :/ camera have power I see Red light at night but camera not working ;/

[@frankayala3950]

Still having problem?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@xristosstefos5866]

Kalispera.mporo na valw enan metasximatisti 230-12v kai na koumposo tis kameres ?

[@PoseidwnTech]

Αν μπορείς δες το πιο αναλυτικό video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@bbogdanmircea]

Those adapters look really horrible, are you putting them into some boxes or are you leaving them outside the camera, exposed to the elements?

[@PoseidwnTech]

Of course not! We are using junction boxes. Check this video : kzbin.info/www/bejne/gnXHYZehateci68 This is an IP camera but the junction box is the same.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@jorgeantonio6774]

Friend.. if I connect several IP cameras via ethernet cable, will that make my internet a little slower?... I understand that Wi-Fi cameras do make the Wi-Fi internet slower, but I don't know if I should do it via ethernet also make it slower

[@abualis1178]

If you have a good network you should be ok

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@brotherist]

How come you can use this for 2 camera? Do you mean one of camera has no power? You already use 3 out of 4 pair

[@PoseidwnTech]

We use common power for the two cameras. For example : Brown Pair --> DC + and Blue Pair --> DC - for both cameras, Orange Pair --> Video Signal Camera 1 and Green Pair --> Video Signal Camera 2

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@ミゲルアヤラ]

Hello, do you have a video on how to set up the tv screen for the cameras?

[@celsojoven3525]

Pwd

[@ミゲルアヤラ]

@@celsojoven3525 We all are pwd or are you an expert using Autocad because I am

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@kokouemmanuelglahou9241]

Comment monter lesdispsitif de caméra de surveillance

[@kokouemmanuelglahou9241]

Je la perceuse à main et la perceuse à vis mais je suis au Togo merci le prix

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@nikolaspantzialas3648]

Είσαι έλληνας ρε φίλε are you are greek or no

[@PoseidwnTech]

Έλληνας! 🇬🇷

[@jundurantv1430]

Much better you can show the video if your camera is working or not. Thank you!

[@PoseidwnTech]

Thank you for your comment! I will do so in the next video with the new video baluns!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@ambroseene6925]

What is the max distance with these baluns?

[@PoseidwnTech]

These baluns are 4K Passive HDCVI Balun from dahua and according to their site : "Transmission Distance at 4K: 200 m (656 ft)" us.dahuasecurity.com/?product=4k-passive-hdcvi-balun

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@aurelianocilocilo5070]

thank you so and i got it..

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@Akeso_ppp]

and where to get screw socket??

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@postelnicuadrian72]

If i have dahua cameras with inbuilt microphone via coaxial to the dvr, microphone will work if i do this type of wiring??

[@PoseidwnTech]

Yes they will work!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@pagadalaraveendrababu8265]

U have given one cc camera connection sir. 2 or more how to give power connection sir

[@PoseidwnTech]

With 1 UTP you can connect up to 2 cameras : For example : Brown Pair --> DC + and Blue Pair --> DC - for both cameras, Orange Pair --> Video Signal Camera 1 and Green Pair --> Video Signal Camera 2

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@salifumubarikwumpini1286]

Will audio work in this connection

[@JayRTech]

so if we have no available premade bnc cable .then we use this video balon method right?

[@PoseidwnTech]

Yes that's right!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@adityamedicare8583]

Good teachings great IDEAS are MADE Good experienced knowledge. Keep it updated 🙂

[@PoseidwnTech]

Thank you for your comment!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@crhistianhorna3115]

Will this work with differents analogs brands camera with different DVR brands?

[@PoseidwnTech]

So far i didn't find any analog cameras or DVR that doesn't support video baluns.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@calvincampbell9511]

I need to know how to connect Jensen bulbs Camara

[@PoseidwnTech]

We are not familiar with this brand!

[@johnolivares3712]

What kind of power supply is that?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@vikumliyanage2277]

Can you tell this step all camera system working?

[@PoseidwnTech]

Yes all cameras are working! And also if your customer wants to change the cameras from analog to IP you will have just to terminate the UTP Cable with RJ45 connector. Also with utp cable you can connect two analog cameras at the same time.

[@SAEED2HK]

This kind of power supply for only one camera not for all

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@OpenMindTechnical]

I am working CCTV Pakistan

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@mrcusim]

It's really unstable and not good, i'm reconmend coaxial cable, it's much better

[@PoseidwnTech]

This is just a solution in case this cable is you only option.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@7918476]

Great video i have a question. Does it make a difference if i use a 2mp balun on a 5mp camera? And why?

[@xXFOYXxQ8]

The guy clearly doesn't pay attention to answer the comments, but I don't mind to give a definitive answer to your question. It depends on the voltage. If your camera (check the label sticker on the camera unit/box) takes 12 volts and only needs (required) 1 amps or maybe 1.5 amps, don't worry if you put a power supply with 12 volts and 3 amps or 5. The voltage where you have to be picky and careful. I use 2.5 amps just in case the power supply gets weak over time due to our extremely hot weather (Middle-East). I hope I answered your old unanswered question throughly!

[@PoseidwnTech]

I apologise! It requires a lot of time and effort to create videos and sometimes it is very difficult to answer every comment! Thank you for taking the time to answer!

[@ahmadzaki3328]

So what is the point? I don't get it

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@alexbala8936]

Normally i use following: Video balun green for + whithe green for - and for supply brown and blue for + and white brown and white brown for - . The orange and orange white i don't use it. Every single cable for one camera and i puted 4 in every corner. I think that's the way for good connection and no interferences

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@md.shahinulislam7982]

Nice video, but I have a question what is the defarence Between 2+2 video bellon line and 1+1 line. Thanks

[@jigjigsc]

just use rg6 cable!.. less job to do,no baluns needed

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@joeysandersgoogleplus]

Why you didn't use the green one for the video? Only one wire for positive and one wire for negative?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@irishlad7458]

Twisted pairs are crap use proper cable you can buy them premade any length for peanuts

[@PoseidwnTech]

The only reason to use utp cable is for connecting two analog cameras using one cable or to have your installation ready for a feature IP Cameras upgrade.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@ippokratiszar]

I did the same to my system but the picture ballun overheated. Where is the problem?

[@PoseidwnTech]

Maybe in the quality of the baluns or because of high voltage.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@mdriyadkhan165]

Good video

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@carlosfreitas7982]

Boa tarde amigo! Instalei 4 câmeras Intelbras na minha casa. Só que está monitorando só na tv como fazer para monitorar no celular.Obrigado

[@PoseidwnTech]

Hi! What cameras do you have? For example if the cameras are from Dahua the mobile app is DMSS.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@davidr5870]

Can you double up on the video balun?

[@sprax112]

You can and I used to, until I started getting lines that were not fixable, I used single for both power and video and it's fixed the lines...

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@amil7441]

Hi am confused so if I want to connect 8 camers IL have to get 8 separate power supply?

[@PoseidwnTech]

Hi! It's not your fault. That was an example. For more cameras you can use a power supply like this one : amzn.to/2XHX42E

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@alphaisaladedoyinope7161]

Does it work seamlessly when the utp cable is up to 300m, if so how do I solve the power problem from 300m away?

[@PoseidwnTech]

300m it is a long distance! I don't remember to have tested in a distance like this. For more than 100meters i try to connect the power supply closer to the camera.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@kundanlalahirwar3764]

Good idea

[@PoseidwnTech]

Thank you!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@Bumi01]

How connect audia CAMERA to balun ?

[@PoseidwnTech]

It depends on the camera. There are cameras that do not require extra cables.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@shalimarphotocenter7194]

You did not show camera result Please complete demonstration thanks ?

[@PoseidwnTech]

Please check this video : kzbin.info/www/bejne/q3vdgJmwfthspdE

[@PoseidwnTech]

I finally made a complete presentation : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@ElectronicLogic-7plus]

Hoisa

[@funkblack]

This is very helpful, but one thing I don't understand. If I have 10 cameras, will I need 10 power adaptors to power all the cameras?

[@MrCleitus]

Hello, did you ever get an answer for this, I am wondering the same thing.

[@funkblack]

It depends on the charger amperage. Usually one camera draws 0.5A of power, so you'd be safe with a charger with 0.5A or higher output. If you do have a 3A charger, in theory you could hook up 6 cameras, but I wouldn't do that. I would say only 3 cameras are safer.

[@PoseidwnTech]

I agree with you!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@bilalsyed9102]

Salaam Muje 1 problem aa rahi ha k DVR local net pr chalta ha jb mai mobile ka data ho krta Hon tu connection fail ka option aa jata ha Mai Neye Neye pro Xvr pro sb application check ki hn Kindly is ka Hal batin

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@edmanuelfuentes6210]

Hi. IT helped me very much. I have 1 issue why does it blink when i use a longer cabel? Please help

[@PoseidwnTech]

The problem is with the power source. Try to move the DC Power Supply closer to the camera.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@AdwoaAkwaboaa]

Will any light show on dvr

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@ericmpoki3003]

I want to learn how to delete a footage on nvr

[@danpsalmersanagustin3747]

What is the maximum length of this configuration? dc power and balun connection if the power supply is centralized?

[@PoseidwnTech]

With a Cat6 cable and using 1 pair(2 wires) for + and 1 pair for -, i don't recommend to use for more than 100 meters.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@fralesyt]

Question… you didn't use a pair of the ethernet cable. Do you think I can use a single ethernet cable to connect two cams to the dvr? Of course I have to share the two pairs for the power supply of the two cams and, if the second cam is in a different position from the first, I have to open the ethernet cable and remove the pair of the second cam. What do you think about it?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@danielrivas6356]

Excelent video, thanks... So simple to understand...

[@PoseidwnTech]

Glad it was helpful!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@rondill8429]

rg59u cable and 18ga 2 conductor for power is the way to go... NOT THIS CAT wire!!!! Stupid video and mis informed information!!!!

[@PoseidwnTech]

I understand that you don't agree but i don't understand why are you so angry about it. If you don't like it don't use it. For this video i used a simple UTP cable, but if you want you can choose S/FTP Cat7 shielded cable. I am suggesting video baluns because with one cable it can support up to 2 analog cameras and it is future proof since you can install later IP Cameras! With RJ59u cable are you future proof? Or when your customer will want to upgrade his system you will tell him that he has to change also the cables...

[@rjnz7744]

terimakasih informasinya, mau tanya apakah ada perbedaan kualitas video menggunakan kabel utp cat5e atau cat6?

[@PoseidwnTech]

For the analog cameras there is no difference, but the idea of using UTP cables in analog cameras is in order to make a future proof installation and to be easy to convert your analog system to ip. So it is better to use Cat6.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@richardbaring1167]

too bulky rather use the conventional way

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@bahirdartanadar5017]

what is atype of cable

[@PoseidwnTech]

UTP Cat6

[@ravindran8761]

Taking too much of time in sleeving and connecting wires.

[@PoseidwnTech]

Thank you for your feedback! We are preparing a new video about baluns so we hope to like it more this time!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@VictorGreed0]

His demonstrating what else do you want him to do old man?

[@MudassirKhan-e1b]

Rrr😊

[@MalikahHypolite]

can this be done without a connector

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@khubab4712]

Can we use single cat6 to connect to cameras? If yes what will be the color coding. Thanks

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@jay-6835]

Can anyone tell me what the device is called at 5.02 mark? (used for connecting the electric wire)

[@PoseidwnTech]

Do you mean the male dc power jack?

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@chashok2540]

No

[@chashok2540]

No

[@bishaanramarya3009]

inthis video did not explain why video baluns needed.

[@PoseidwnTech]

Video baluns are needed in order to use UTP cable for the analog cameras.

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@jp31577]

Ve..nice.. ideas..sir thank you..

[@PoseidwnTech]

You are welcome!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@Scattered.thoughts.]

Must use a high quality cat-6 cable and remember to give power supply externally for better vedio

[@PoseidwnTech]

Thank you for your comment! You are right!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@LeonaldShila]

I not understand broo

[@PoseidwnTech]

Then watch please this tutorial : kzbin.info/www/bejne/fafLqJ-laLZ8mJI

[@CCTVFUNvlog]

Good video

[@PoseidwnTech]

Thank you!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve

[@everavila6832]

Thank you so much for this video, very help. Greatly appreciated it.

[@PoseidwnTech]

You're welcome! Thank you for your comment!

[@PoseidwnTech]

Please check this latest and more detailed video : kzbin.info/www/bejne/fafLqJ-laLZ8mJIsi=glaQoLEVcG9e-8ve