Positive Input Ventilation Unit PIV Install by EASY DIY

Vent Axia PureAir Home with Heater
Vent Axia
Lo-Carbon - PureAir Home with Heater
PureAir Home is designed to eradicate condensation and mould from your home.
It reduces the risk of health issues in the home by improving indoor
air quality and quickly eradicating conditions that lead to mould growth
and associated health issues such as asthma and itchy skin.
The unit reduces humidity in the air, curing condensation
and creating a healthier indoor environment.
Vent Axia
Prevents condensation and mould
Prevention of asthma and allergy irritation
Only costs £5 per year to run for a 3 bed house
Whole house air purification and humidity control - up to 5 bedrooms
Discreet installation - out of sight, out of mind
2Mtr, 8 inch flexi-duct included
Easy to install & 5 years maintenance free
I got My from - www.tlc-direct.co.uk/Products...

[@user-mh8qy5dm9t]

Thanks for the video… I’m looking to buy one of these and did wonder what the difference is between the heater and non heater version is… now makes total sense.

[@Urfalimaho]

Where can i find the manual i lost mine need to change the setting please

[@Dizzie20vt]

I second the hardest part is getting that sodding pipe onto the unit!

[@lookoutvideo]

13:40 I also found that the filters collapse quite considerably when the unit is in operation - reducing the surface area; In the brochure and images all the filters appear to be fully expanded/extended which is somewhat misleading in my opinion.

[@adrianmaguire5459]

I've got this unit and have just (2 mins ago) fitted the heater unit to it. Mine has been in and running in my bungalow for 2 years (without a heater). I had a lot of condensation when we first moved in. Put the piv on a 2 room setting and it made little difference (2 bed bungalow) so I put it on max for 5 beds and now we have no condensation at all. It's worked great for us so far. We did find the hall where the piv vent is, is colder than the rest of the house hense why we have fitted a heater unit. I'm setting it on 10c because I don't understand the instructions and will plug an energy monitor in to see when the heater comes on. (It records when the watts on the piv goes up and for how long)

[@robthesamplist]

You can retro fit an addon to these units sold without the heater?

[@kieranbrown1506]

how are you getting on with the new heater fitted? does it cost more than you thought?

[@tomasviane3844]

I bought myself a cheap Diesel Heater that blows hot fresh into the house. Sounds like it does exactly the same thing while it's also heating up my house...

[@martinthomas2614]

Ive got one of these and the air coming in is freezing. If anyone can help on how to increase the temperature please let me know

[@michaelbarker1635]

My girlfriend has one of these units and it is the heater version similar to yours, hers is constantly blowing out cold air, without instructions, and operating instructions I was wondering what setting on the control panel is in relation to getting it to blow out heat not cool air! I noticed one called (c10) from the menu and imagine you up this value to 20? But not 100% sure! Any help would be great

[@davesaerialphotography3349]

I’ve just installed one too mate and can’t seem to get the heating element to work so the air is a few degrees warmer going into the house

[@MrFinchx]

I'm using a 13amp fuse should I use a 3amp? Also what setting did you use

[@karlbaker9301]

3amp

[@WavyWoodwork]

Thanks for sharing. Looking to get one in our house as it suffers damp and mould at the moment. It’s a constant battle. Have you found it makes a big difference?

[@bernie129locksmith]

fitted 3 in rented houses they were nu aire - solved the problems within a couple of days and been working for years with no problems - tried everything before with no success including de-humidifier which just filled a bucket of water overnight with no change to condensation

[@ian6193]

Axia told me a fused spur was best to connect power supply

[@robthesamplist]

Yea they will as its a fixed device tbh a plug with the correct fuse will be just as safe obv if in a rented property do it as per manual and get a fixed fuse spur put in.

[@BOW1979..]

Hi, I've just installed the same piv unit. Like everyone else unable to increase heater! I cycle through each mode looking for something that looks like increase heat. But all looks like alien language lol. Can anyone please just say what symbols to look for and how to increase temp. Thanks

[@leonperry123]

If its got the heater, I believe it only heats the air by 4°.

[@johnburton2761]

How do you a activate the heater

[@Dizzie20vt]

Go through the Menu on the Sticker until you get to the one for the Heather Setting. It can be set between 5 and 20 deg for when it comes on

[@a.m.9357]

This is basically a small 24-7 heater. It's defo going to affect your bills.

[@fuckoffimnotusingmygaccoun7291]

The heating is optional, you can turn it off so it is ventilation only.

[@sarahHarris-yt9mc]

Heater only comes on at 5 degrees. Or higher if you set it higher

[@jc.1997]

Hello, how do you control the machine when you are not in the loft? Do you have to climb to loft everytime you want to turn it on/off?

[@ElCharvo]

yes

[@BrandonHocky]

It runs constantly and apparently the heater kicks in when the air in the unit falls below a certain temperature

[@markscott5155]

Hiya. Great video. But wondering is you know how to activate the heater? Not having much with the instruction guide lol.

[@DIY_Easy]

You are so right. I didn't find the instruction easy. To be honest, I used the mode button and where it says 'c', and I put that up to 19°c. My does give out a bit of a cold air but it's not cold as the loft space air. I am assuming it is working. Apart from the cold air around the lobby apace I haven't noticed any difference. I guess it's too early to tell. Maybe good for health as my family suffer from asthma. Do keep me updated on how it goes for you. Thanks.

[@markscott5155]

@@DIY_Easy thanks. Will give that a try. Just moved into a new build were the unit has been installed but finding the hallway a tad cold (I know we’re in winter lol) even when heat has been on for awhile. Will see how it goes.

[@jujharmatta2978]

I can you explain in video about the commissioning of this unit and final setting. I get installed this unit around 2 months but not seeing any major difference.

[@shahidurrahman6441]

Ive got the same exact piv system, ive had it over 6 months now and see a big difference, i used to get condensation and damp in my living room, now I don’t see it, only get condensation in my bedroom due to the door being closed and 3 people sleeping in one room

[@shahidurrahman6441]

Have you figured out how to set the heating on? Let me know if you do

[@rossbrooks402]

In the manual it tells you that it requires a switched fused spur with the correct fuse

[@robthesamplist]

Yea but a plug with the correct fuse will do the same thing and is just as safe as long as the cable is protected.

[@robthesamplist]

Yea but a plug with the correct fuse will do the same thing and is just as safe as long as the cable is protected.

[@kevinhancock4064]

Our extractor fan is on a plug hidden 3 amp I spoke to a lecky friend and said he'd done the same as it wasn't ducted

[@Mpalmer00]

I hear the heater is 400w so having that on 24/7 could be quite costly? 22p per hour or so (2023 kw rates Uk) Did you set yours to max temp and max fan speed? And have you noticed any crazy hike in utility bill? 😊

[@DIY_Easy]

I haven't noticed any spike on my bill I don't think it is much as you say as it probably doesn't use 400w constantly. I am still keeping my eyes on it and testing it. My main concern is Mould on my walls, and so far nothing yet.

[@rossbrooks402]

It doesn't run 24/7 it pulses on off every so often

[@leonperry123]

The filter bags have a large spring to keep them in shape.

[@sarahHarris-yt9mc]

I've just fitted one and the filters didn't come with a spring and look like the ones in this video

[@user-fm8cj4jp3e]

Have you noticed a difference since installing this? :)

[@neildeath7780]

I’ve had mine installed for less than a week, no more condensation at all. Have high hopes we going to have a good winter

[@keithwilkinson4837]

Yep, it works great. Mine is an unheated version.I have two two-bedroomed Bungalow. I have the unit set on 1 bedroom setting meaning a very small airflow but that is enough to solve all my condensation problems which had all the double-glazed windows running in water. Windows dry by the next day. Transformed our bungalow. And cool air coming from the unit is almost unnoticeable

[@denniscronin1112]

Brilliant makes your house colder and is a massive fire risk in your loft avoid

[@joeshmoe7899]

Ewwww, pumping filthy attic air into living space. Filter doesn't remove ultra fine particles and voc.