Positive vs Negative Air Pressure as Fast As Possible

[@reconrey]

That hair on Linus's shirt was annoying me to no end...

[@luk4s195]

i tried to wipe it off my monitor XD

[@iWillWakeYouUp]

LOL yeah I noticed it as well.

[@AlexTechFix]

I didn't see it at first. Oh god, now it's annoying me too!

[@SONOFAZOMBIE2025]

what is wrong with pubic hair on your shirt?

[@qamaruzz]

1080p represent

[@enjoiadrian]

That one long stray hair that clearly didn't come from Linus.. it had me fascinated.

[@NapplePlaysInHD]

same x]

[@enjoiadrian]

Geeeeez, who's QC'ing this stuff :P

[@666Sakio]

Probably from Luke?

[@enjoiadrian]

Too much hugging going on, not enough videos :P

[@verisimilitudeteller]

Pussy hair, he's got a lot of cats.

[@SuperGeekNo1]

Very funny reference at the beginning 2g 1c lol.

[@Marzy07]

I see now 😂😂😂

[@zbynekzapletal4167]

It took me a minute to get it but yeah... xd

[@RahulAhire]

@@zbynekzapletal4167 what it means?

[@sakurauyou749]

@@RahulAhire n o.

[@RahulAhire]

@@sakurauyou749 ??

[@avalerionbass]

You know, I've seen a lot of your videos, they've helped me come back out of the dark ages of computing, but I must say, you are very good at what you do. Your camera presence is great, you're very knowledgeable about your topic, you explain things simplisticly and concise, you're very engaging, and the crack about outside having great HD graphics had me rolling! Job well done sir.

[@stephenblant]

And having said all that he still managed to talk a load of BS

[@KGBos]

​@@stephenblant such as??

[@just.nobody]

@@KGBos Nothing. The comment from Stephen is what BS actually is.

[@delayedcreator4783]

@@stephenblant explain

[@dickheaddude3524]

Ahh, a bot.

[@TheJunaidHsn]

Was his First joke about "2 GIRLS 1 CUP"?

[@mohit96mb]

yes

[@TheJunaidHsn]

96mb so many bad memories just because of that one joke.

[@mohit96mb]

hahaah. I know that feel bro.

[@AlexReflex]

2 Guys 1 Chick my friend :D

[@joeymt9215]

Alex Reflex oh, i thought it was 2 girls 1 c*ck.

[@IIllytch321nonadinfinitum]

The one time I asked an older woman what a cheap, breathable brand of pantyhose was.

[@xtote]

So she knitted you a pair?

[@LookingGlass69]

How old are we talking about

[@MacBookDesu]

Big brain time

[@SmokeyJupiter]

who else is here 8 years later?

[@Sumit_sudo_root_rm_rf]

9

[@ExplosiveTowel88]

@@Sumit_sudo_root_rm_rf11

[@rubetube4727]

9

[@smallbutdeadly931]

9

[@ExplosiveTowel88]

@@smallbutdeadly931 why did KZbin notify me

[@Mak933]

Negative pressure (at a ratio of 2:1) actually keeps things cooler, longer. I did a quick test with all intake fans at 100%, compared to 20% CFM intake and 40-50% exhaust, and results were surprising. I ran just a CPU stress test, and fans at 100% were only a few Celsius cooler than fans at 20-40%. Creating negative pressure may invite more dust, but from what I've seen it's the best way to cool your PC.

[@survival_man7746]

of course more fan power = more cool. For a better test, all fans should be at 100% and, for example, test 2 in & 3 out vs 3 in & 2 out.

[@trashstarr]

I’m building my first pc in the hyte y40 and the max amount of fans I can use is 7. 3 intake, 4 out. Would you reccomend or just stick with a 1:1 ratio

[@RH-nk7eo]

@@survival_man7746I don't think you understood his comment properly. He's saying that all fans at 100% (balanced pressure) only resulted in a few C cooler compared to a negative pressure setup (with max fan speed of 50%).

[@hamsterminator]

These tests are always highly subjective to the case and layout. Generally speaking if the case is crowded, simply having fans working against eachother makes zero sense. It's basic physics- heat needs to be transferred to the air, the air needs to be replaced. Therefore a higher through flow will always give you the best result. Unless of course your case is empty and full of holes, in which case replacing air being blown out probably isn't making much of a "negative pressure" anyway.

[@poppypbr3996]

Negative pressure invites dust in every nook and cranny which will shorten a computer's lifespan. Make sure that the ratio of intake to exhaust is 2:1, 3:2 or 4:3. Modern cases used by computer assemblers emphasize lots of intake fans: often 3 and sometimes 6 fans from the front of the computer, and half as many fans exhausting air. They want to build computers that are better than those made on assembly lines The trick is to filter the intake fans so the dust is kept at a minimum, keep the air flow high so components are adequately cooled, and use no filters on exhaust fans so the small amount of dust that does get in remains suspended and will exhaust out of the computer. With positive, managed pressure, dust will not come into the computer through the seams and panels. Ratio of intake to exhaust from 2:1 or 3:2 or 4:3. 5:4 would produce neutral pressure and even numbers like 3:3 actually behave as negative because heat rises , GPU cards and power supplies exhaust, thereby creating negative pressure near the bottom of the case. You have to assure intake fan superiority to get sufficient air flow and movement and the benefits of positive pressure.

[@noonehere0987]

Heat does not significantly rise in a computer case because the air flow from the fans moves it in its direction too fast. They negate any currents that would cause it to rise.

[@CoteDivoireMakingof]

HAHAHAH the comments made me change the quality of the video and figure out what hair they talking about. damn it people have time for this lmao

[@TheBornBoy]

That hair really bothers me. What's the video title again ?

[@deanstrathras3315]

Haha...that's not nice.

[@sinocute]

+dean Strathras I think he means the hair on Lenus' black shirt.

[@calbe25]

I couldn't focus.

[@valk_real]

Lenus Toch Teps - bets toch teps 2016

[@chagi4334]

The hair writes OC i knew it. Linus is overclocked

[@rvymvn]

Linus, the hair on your right shoulder annoyed me this whole video

[@Stranio34]

THANKS! I'm not alone xD

[@xIpodTouchGoeroex]

but who was it from :O

[@samwhite2056]

i don't even know why i'm so annoyed too..

[@CoreySenderson]

Sameee

[@namsaying]

***** SHETTTTTTTTTTT WHY'D YOU HAVE TO MAKE ME NOTICE

[@kevenharvey9711]

Since you filter the intakes, it greatly reduces the amount of air pushed into the case, so you'll need more intake fans for a balanced system and even more for positive pressure. Maybe 2 to 1 intake versus exhaust, takinf into consideration that psu also acts as an exhaust.

[@phjsher]

Doesnt a psu get its air from outside the case though?

[@darthollpheist1156]

"before we move outside, although I heard it has great graphics". Greatest line ever.

[@Excal123]

Haha so my computer is basically my own heater in my room lol!

[@misterdinner3648]

I can fry eggs on my LCD

[@GabrielMiceli]

Must be the LCD inverter. My Dell laptop's LCD inverter gets hot.

[@archived1292]

Unless it wont vent out heat! (It's possible to build a PC without ANY moving parts! Just replace= HDD: replace with SSD VGA: cooler: Find a passive one or use a lower TDP card PSU: Replace with a fanless one CPU cooler: Use a NoFan 95 TDP cooler or some other fanless cooler RAM: Use RAM with heatsinks, and dont add fans! CD/DVD Throw it out!!! FDD: Just dont use it!!! PCI-e cards: Find large heatsinks you can attach to them.

[@dash0173]

LINUS!!! THERE'S A HAIR ON YOUR SHOULDER!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@ieatsoap88]

lol your right

[@InfinityS315]

calvin ouwens what about his right?

[@ieatsoap88]

KillerBillPickle what about my right

[@arthurabraham3271]

what about all rights

[@username306]

adza botchway lol illuminati confirmed

[@tlita93]

Video quality is like you bought a new camera :o So clear picture..

[@thatconnorguy319]

They have uploaded in 4k for quite a while now, i think they use a black magic URSA.

[@tlita93]

ThatConnorGuy Yeah 4K is okay, but if you have an i3 you can't watch even 1440p without frame drops.. But what I wanted to say is that the picture quality / video bit-rate is higher, it seems.. :)

[@yushy5900]

So clear that i can see that strand of hair on his right shoulder >.

[@Brownboy42069]

ThatConnorGuy They use an FS700 with 4K firmware outputting to an Odyssey 7Q. In front of the sensor they have a Tamron 24-70mm f/2.8 VC on what I assume is a Nikon G to Sony E adapter, though maybe they've swapped to an EF mount version of the lens and a Metabones EF to Sony E Speedbooster to take advantage of in-camera adjustments, stabilization, and the extra stop of light.

[@tlita93]

Le Monarque Whoa.. I'm no video expert pal..

[@MrTacticalinuit]

When my s4 active gets warm from gaming, I put it in the sink and turn on the cold water. It cleans some smudges and it cools it down. Because it's waterproof.

[@sindri8393]

Watercooling, ghetto style. You should try to attach an h100i to it so you can oc it @ 4ghz.

[@sirjoot]

iMrzifyyy You do realise he meant the Samsung Galaxy S4, yeah? Not sure if srs.

[@levi799]

The S4 is not waterproof at all. It's somewhat water resistant but not waterproof. Big difference.

[@murdercom998]

Voyd Void read....

[@540iDavid]

Laurence W ***** He is being sarcastic...

[@l_ayment811]

Could you do a video on coil whine? What causes it and how to fix it?

[@MattHoffmannn]

This person here would also love to know.

[@CelmorSmith]

Matt Hoffman Same here.

[@BurtyHaxx]

i sorta know so a vid would help clarify this :)

[@l_ayment811]

And I also want to know in which video cards / power supplies is coil whine most common.

[@CemerianVids]

He already has a coil whine tech quickie...

[@nathanwest2304]

can you use vape to simulate airflow?

[@anxdmeme4208]

Please

[@valk_real]

! this should be a thing an actual reason to Vape

[@vrunchycrunchy9272]

Vapor wave

[@devinbasham6855]

Be very very careful when attempting this. PG is an alcohol, so it poses little threat, but VG can (and will) stick to delicate parts, causing accelerated corrosion, and possibly even condensing enough to cause bigger problems, such as shorting a connector and damaging parts.

[@ps3master72]

use 100% PG juice!

[@tanerismailoglu9789]

"outdoors, although I've heard it has great graphic" makes me laugh everytime

[@Gunbudder]

Live referenced this video so many times over the years. Easily the most concise info dump on case pressure

[@quentin5951]

Thanks for making the video Linus I wasn't sure how many intake vs exhaust fans I should have.

[@pieterrossouw8596]

full negative pressure seems to work best for me, yes it sucks in more dust but I clean it every now and then anyway. The case is a Coolermaster Elite 130, an ITX case, every fan blows outward and I've found it to be best for cooling because getting hot air out is better than getting cool air in. The difference is not night/day but this setup has been consistently cooler than having a front in-back-out setup or full positive pressure.

[@SamoScopom]

Linus nex time consider not to hug your wife or someone with long hair before filming, that hair on your shirt is driving me crazy... That was just a minor complain, as always great informative video

[@SamoScopom]

***** well, that changed my view on Linus Media Group...

[@firefox5926]

3:09 its also how the nbc systems on tanks and other fighting vehicals work to keep things like chemical, radioactive and biological contaimiants out even in the event of the armour being breached... as long at the breach isnt toooo big

[@vinicius401]

Title is kinda misleading since you spent 65% of the video explaining the theory of cooling. Great video btw.

[@vinicius401]

I agree. I also use a combination of both. But I think the video could be titled something like: "Improving your PC cooling", or something more generic. He only mentioned positive and negative air pressure at the very end.

[@marcosavila8215]

1:56 come on Linus that's snow not dust, looks so Christmasy , some colored balls and you have a Christmas tree

[@SPL-6]

Mom, I took your pantyhose..... Don't ask!

[@mika2666]

but: can you use an unused one too?XD

[@rvymvn]

LMAO The "2 Girls 1 Cup" reference was hilarious!!

[@FrodeLøtvedt]

Outdoors have greate graphics!? I laughed out loud!! :D

[@flipvdfluitketel867]

The gameplay sucks though

[@raegaldorn7681]

And you cant respawn :(

[@taz874]

its not my type of game tbh.

[@r0hano]

Frode Angell Løtvedt yea but my human eye can’t run it :( I need to upgrade my graphics card to this thing called glasses to be able to see the fabulous graphics

[@0x5af]

Ahhaahaha me too

[@12345fowler]

So to recap if I got tht right : For general cooling objective the idea is the move the maximum of air (quantity and speed) trough the case. For dust buildups you have to make sure you have neutral or slightly positive "pressure" inside the case so as the avoid at all cost to have air flowing in trough various small holes around the case. So the best setup is to get maximum air flowing trough and at the same time beeing neutral or slightly positive inside. If not sufficient for cooling you can move more air out but this will be at the expense of dust buildups.

[@lmCIoudz]

3 intake, 3 exhaust for me.

[@CouldUseARide]

3 intake, 2 exhaust.

[@Zak437]

3 intake, 1 exhaust.

[@Rockdude908]

3 intake, 0 exhuast

[@Rockdude908]

3 intake, -1 exhaust

[@Zak437]

Now that's just silly!

[@chanchan05]

Linus in 2014 - Unless you have smoke machine to test air flow... Kids in 2020 - uses vape smoke on Xbox

[@sandvijj02]

Question: I have 4 intake fans and 1 exhaust fan, how's that for dust?

[@Zukirin77]

not enough air can get out, so not all dust can escape. i think atleast

[@shane250]

If all 4 intakes are filtered, you'll have no dust problems for the next 4 years! I have 2 highly shedding dogs...So I ran 3 intakes 1 exhaust. 7 years later, my pc is still clean(ish). I wouldn't say it's "Dust-free", but only the microparticles managed to get through the filters. These are the easiest to blow clean with a can of compressed air or ba blowdryer on a cold setting.

[@Jnijst]

Thanks heaven, finally someone who tells the whole story in 4 minutes instead of 25. A bit of graphic would have been nice, but listen and you;'ll find out

[@angry_yorkshireman8815]

I tried the used panty hose trick and now my PC smells funny !!

[@eresuplays]

mind telling me whats that trick?

[@ilidenstrmrege987]

wash them before attaching them to your PC

[@doctorboot7191]

hehe thanks for the laugh

[@AK-tf3fc]

Pantyhose are taboo and embarassing in India so I can't use them.

[@sinuslebastian6366]

A K bruh he is not askin you to wear them. Order one off amazon and add it to your PC. Jfc.

[@phantom498]

THIS IS THE BEST CHANNEL EVER! lol I found this channel yesterday when I was trying to find out about some stuff and stumbled across it. I've been binge watching ever since. Can't believe I never knew about it. I'm subscribed to a lot of tech channels including ncix, and knew about linus' other channel. Oh well, great channel though

[@StephenPersky70]

Good video. I will definitely take this advice to heart. One question... does it matter which way the fan attached to the CPU heat sink blows? In other words, does it matter if the fan pushes or pulls air across the heat sink?

[@Violant3]

i guess yes, it makes a difference, the ideal is for the fan to blow in through the heatsink and not blow out of it, that way more air will make contact with the heatsink and get heat out of it faster

[@GrnArrow092]

I have the fans on the front and the one on the back of my case as an intake. Because heat rises, I use the fans on the top of my case as exhaust fans. The reason for that is for positive airflow and I also have a radiator at the top as well. My Cosmos II also has a 'basement' where my hard drives reside, so I have the fans on the sides down there as intakes and have the air exhaust out of the other side.

[@D_WittaK24]

Legend says that hair is still believed to be on that shirt.

[@BoNeS487]

I have 3 120mm fans in-taking air in the front and bottom and 3 120mm fans exhausting air at the top and rear. Been a pretty good setup. Minimal dust and my system runs quite cool

[@uberinfinitegaming]

One more question...the intake or exahuse can be installed anywhere right? I got 4 empty fan holes..2 at the side and.the other 2 at the top

[@uberinfinitegaming]

exhaust*

[@EddieFivespeed]

back and top should be exhaust, front and side should be intake....although I've seen people use the top for water cooling intake and the side as an exhaust.

[@jacobs9318]

Ex EddieB The second thing you said would be silly, it would make the front intake struggle. As for the OP, you can install intake and exhaust fans anyway but you need to have a good path for the air to flow from intake and exhaust, that's why front and side intake and back and top exhaust is mostly suggested.

[@MrTheuploader123]

just know basic physics rule which means hot air rises and cool air sinks..... intake should be bottom and outake is other wa around.

[@jacobs9318]

***** that would screw with any front intake and back exhaust he would currently have, bad idea.

[@robert-bg9pf]

I used to be a die hard "fan" of using positive case pressure fan arrangements until I ran into a big problem that I just could not figure out at all. My pm was constantly shutting down with no warning. After a couple hours I had narrowed it down to going some kind of overheat shut down... But my CPU and GPU and everything else that you would normally think of causing an overheat shut down were all well within the max temperatures. Long story short, I finally figured out after much head scratching and hair pulling and flaming hot cursing, that my Northbridge was overheating because the case pressure that was only SLIGHTLY positive, was creating a pocket of trapped hot air around the Northbridge... And apparently it's not all that rare for positive case pressure to create trapped hot air pockets, aka Hot Spots, in a system. This is why I switched to slightly NEGATIVE case pressure. There is ZERO chance of having a trapped hot spot in the system anymore.

[@gattie12ben]

That big hair on Linus's shirt :o

[@hhectorlector]

you can use plumbers' "smoke pellets" to test air flow. Thanks for the vid

[@umkm2k]

No idea what those are yet, but thanks for the heads up! I'm installing a few fans soon and that could help out

[@nikrusty]

Love this guy. This is edutainment at its best!

[@Hyland-HyC]

You can also use insents to smoke test air flow of the case to balance it out.

[@R0K99]

There's a hair on Linus' right shoulder

[@alexbicapopii]

Finally a simple a usable advice about negative vs. positive pressure in a PC case!

[@TheAndrewforbes88]

Linus, I'd love to see a video that goes more in depth about optimum fan placement and that answers some other questions for noob builders like: How does the radiator from an all in one liquid cooler affect case pressure? Do the fans on a radiator factor in to case pressure or are they exhausting the hot air from your CPU directly? Is there a place on your case that you should not put an intake or should not put an exhaust? I know these are noob questions and a lot of your audience is very savvy but I think answers to the questions could benefit a big demographic. And if anyone besides Linus reads this comment and would be so kind as to answer that would be great too.

[@Spiderpack]

I'd been waiting for this video for a long time. Thanks, guys!

[@LastedHyperion]

The entire beginning all I could look at was the hair on his shoulder XD

[@gs9976]

Linus's product placement marks the first time ever that I find myself actually not minding adverts...

[@cridenh2owo257]

0:04 2 Girls 1 Cup

[@Wtfkys]

We know

[@shifty6940]

Love all the references in these videos

[@frollard]

Can't get over the hair on your shoulder. Great episode as always...

[@sbeer]

I think I have a pretty good airflow in my Corsair 350D. 2 fans at the front as intake and one at the back for exhaust. It's not really unbalanced because the front intake it's not "direct", I mean, it has the brushed aluminum that's kind of blocking the intake. so 2 to 1 in this case it's pretty good. I noticed dust accumules just on the front filter (and the PSU filter aswell). I wish I had the top filter like the 450D though... since dust can "fall" in the computer while it's turned off. fortunately when it's on the positive pressure keeps it out.

[@mad1pengu619]

1:37 He sounds genuinely disgusted with children...

[@darkdancerman]

I have a square space site from your suggestion! And I'm happy so far.

[@Meth0d320]

YOU HAVE A PIECE OF HAIR ON YOUR SHOULDER thanks 4k.

[@xnamkcor]

At 1:05 the readout on the temperature display says "60" and a superscript "0". That's not a degree symbol. Someone just typed a Zero and made it superscript.

[@TheToolofLight]

That hair on your shoulder/chest part is distracting the hell out of me ! LMAO

[@teekanne15]

I prefer the "visualisation" of the talk via pics in a frame enxt to the head over fullscreen google images. Like on the PBS Idea channel or others

[@Eddynstain]

dat hair on Linus' shoulder tho

[@TheTundraTerror]

Intake on the front and outtake on the back for a good flow with intake on the side to keep dust from settling on my MOBO.

[@Gannicius]

That hair on his right shoulder annoyed the hell of me :P

[@Semtexxify]

What if you put the PC case itself in a kind of "fish tank" or in a another case made off glass, doesnt matter, only important thing is the glass itself. Then you just make sure the air is going "downwards". You lay the case on your desk/table and drill/make/have special wooden/whatever. You put the case in a glass case, atleast half "larger" than your original case, the glass case has holes undereath it. Why down? Well, dust comes rather from the ceiling than from the floor. Also glass cause you can very easily manipulate the temp of glass. The only problem tho would be codensation, but there is multiple solutions for that as well.

[@ZxstrykxZ]

That hair on your shirt bothers me :(

[@seecretgamer777]

I love the energy when you said "children"

[@vlad11112]

outside 2 has the best grafs 2014

[@Animurh]

In this regards the fractal r4 is a beast for moving air not only that it is silent as well

[@mmarfe]

kkkkkkkkk 2G 1C!!! that was nasty!!!

[@mcfuryan2448]

I like to add one other troubles I feel not everyone may not think about and that's using fans that are moving too high of RPM's, These fans will draw too much power and can cause burn outs on any motherboard 4 pin fan headers. Have to use those kind of fans plugged into Power supplies instead.

[@eetuuotila]

Hahahaha my amd build warm up my room so hot that im sweating

[@karsnoordhuis4351]

a swiffer work also..... i taped some static cleaning cloths to the intakes..........works!

[@sLHakon]

You have either a hair or a bit of fishing line on your shoulder, Linus. =]

[@AltarenGalil]

No. Ultimate solution is positive pressure on idle and negative pressure on full load. Negative pressure is a lot better for performance especially in long term sessions since if you have positive pressure you can start getting wind tunnel effects and a lot of "hot pockets". Use pwm fans and custom fan curves to achieve positive p. on idle (less dust) and negative p. on load (better cooling performance, since it draws air from everywhere.).

[@nobody0]

that fucking hair on your shirt drove me insane

[@anthonyd9043]

Omg me too!! It's not his... Who does it belong to?

[@jasonx8152]

Anthony D'Apice Its lukes. He was trying to get his job back...

[@timtim6787]

hmm... the power 4K huh? Superb Clarity ~

[@terrinedgar5945]

Yes we

[@terrinedgar5945]

I dont 👎

[@thomasoldfield]

A Fast as Possible on types of UPS would be nice as well as including the benefits of just running one in general.

[@YIgaming]

THE HAIR , CANT UNSEE

[@Plusimurfriend]

the dust problem aside... what is more efficient for cooling? other than room temp and the location of the planet relative to the sun.

[@mmmiiikkki]

Dat 2g 1c joke :D

[@JLMtime]

I agree with the difference that a little bit of neg pressure helps air get threw dust filters a little more without buying expensive static pressure fans

[@Thajo_tv]

That hair on Linus's shirt interfered greatly with my enjoyment of the video.

[@megaTHE909Official]

Could we have more 4K/ 1440P videos please?

[@TDPEquinox]

that piece of hair on your shirt is bugging me

[@StevieRay9O]

A blow-in from -ve air-pressure? Too long to be Linus' hair! Also, you're certainly not the only one with OCD watching! &B^{P>

[@ray73864]

It's probably the thing that I focused mostly on during this video :( Kept trying to work out how he could handle having it there, if it was me, it would have been gone pretty quickly.

[@youngcarter765]

It's his hooker's hair :x

[@ALSALAZAR1985]

me watching this on mobile @ 144P negates any noticing of hair on any tee shirt. lmao (data thrift i am)

[@metalkiwis]

Young Carter Leave Luke out of it.

[@kokosnh1170]

the "hot air rises" principal, means a lot in passive systems In normal not so much, but in passive it do.

[@PJemus]

that hair on linus's shirt doe...

[@Alexs321432]

i have a 7in diameter fan on the top, with a heat sink fan shooting cool air through from the back and out the top :) 2 vents on front and side.

[@zakizdaman]

"Used pantyhose" UHHHHHHHHHHHH LINUS?

[@NathanBiskop]

I made a pantyhoe filter for an intake funnel once, for an older machine, worked a charm. Thank goodness I don't use that older machine anymore.

[@danielfogli1760]

You earned my upvote with "I heard the outside has great graphics" sir ;)

[@Chrispy4949]

1 long blonde hair on your shoulder Linus...... What have you been up to ;) **Giggity Giggity**

[@tpcs8667]

You incorrectly spelled " giggity ." :P.

[@tyr4nt99]

Best video in ages. Never knew this and now feel like a noob. Cheers Linus

[@HungrySpinz]

Fuck this I'm just going to put it in the freezer

[@blueraven7273]

DeathToCockroaches Lol that's what I do with my laptop.

[@jonesnj07]

DeathToCockroaches condensation will fuck your system up if you actaullly did this.

[@HungrySpinz]

Nathan Jones Dude... the joke dude...

[@jonesnj07]

DeathToCockroaches "if you actually do this", which i fully get that you wouldn't, plus it wouldnt work anyway, linus recently made a video on a pc in a fridge.

[@ChaosTherum]

+Nathan Jones If you did it in a humidity controlled freezer that could also be ramped down so that the computer could warm before being removed it is possible in fact it's somewhat like what a server room does.

[@Madblaster6]

Pull from bottom and push out the top. Even flow. Pressure fans to push out. Hot air rises and cold air drops.

[@rockgodpatrick]

That hair on the right shoulder!!!!!

[@NoToeLong]

The hair on his shirt is rather annoying.

[@kingj0n]

not really. Didn't even notice. Fail

[@JavSkye]

It has been a discussion 10yrs ago. And it's my todays' concern.

[@OMIGHTY1]

THAT HAIR IS INFURIATING.